Study guide

14.3 Authority, Responsibility, Delegation & Safety Accountability

PRC Mining Engineer Licensure Examination Philippines

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Surface Mining Methods & Pit Optimization

1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits

2 Chapter 2: Underground Mining Methods & Strata Control

2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design

3 Chapter 3: Materials Handling, Equipment & Mine Economics

3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws

4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics

5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types

5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models

6 Chapter 6: Mineral Exploration, Geophysics & Core Logging

6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols

7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code

7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification

8 Chapter 8: Comminution, Sizing & Physical Mineral Separation

8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation

9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy

9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)

11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions

12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate

12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals

13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence

13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence

14 Chapter 14: Mine Organization, Communication & Accountable Leadership

14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability

15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics

15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity

16 Chapter 16: Applied Mathematics & Mine Surveying

16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness

17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions

17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review

18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments

18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments

19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards

19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation

20 Chapter 20: Metallurgy, Foundry Practice & Assaying

20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology

21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood

14.3 Authority, Responsibility, Delegation & Safety Accountability

Key Takeaways Explain This Topic AI

Authority is the legitimate power to decide and direct; responsibility is the duty to perform; accountability is the obligation to explain results and consequences.

Delegation transfers defined authority and work but does not erase the delegator's accountability for selecting, briefing, resourcing, and supervising the delegate.

A delegated task needs scope, limits, competence, resources, decision rights, reporting points, escalation triggers, and acceptance criteria.

Workers need unambiguous stop-work authority when critical controls fail, regardless of production pressure or reporting level.

Leaders should verify controls in the field, manage span of control, and correct system causes instead of relying on signatures or blame.

Last updated: August 2026

Mining managers cannot perform every task personally, so delegation is essential. Poor delegation creates two opposite failures: micromanagement, where no subordinate can act, and abdication, where the manager assigns a task but provides no authority, competence, resources, or oversight.

Three Related Concepts

Authority: legitimate power to make decisions, direct resources, approve work, or stop activity within defined limits.

Responsibility: duty to perform an assigned function or task.

Accountability: obligation to answer for how authority and responsibility were exercised and for the resulting performance.

A supervisor can delegate preparation of a ventilation survey to a competent engineer. The supervisor remains accountable for appropriate selection, scope, resources, review, and action on the results. The engineer is responsible and professionally accountable for competent execution. Statutory duties cannot be erased by an internal memo.

Delegation Checklist

Before assigning critical work, define:

Outcome: what result is required and why?

Scope: which locations, systems, and time period apply?

Standard: what law, procedure, design, or acceptance criterion governs?

Authority: what can the delegate decide, spend, isolate, or stop?

Limits: what requires approval or independent review?

Resources: people, information, equipment, access, budget, and time.

Competence: training, experience, license, and familiarity with hazards.

Interfaces: who must be consulted or informed?

Escalation: what trigger requires immediate contact?

Verification: what evidence demonstrates completion?

Acceptance should be explicit. Silence does not prove that the delegate understood the task or had capacity.

Levels of Delegated Authority

A manager can calibrate authority:

  • investigate and report facts;
  • develop alternatives and recommend;
  • decide, then obtain approval before action;
  • decide and act, then report promptly; or

manage within agreed limits and report by exception.

High competence and low consequence may support broad authority. Novel, high-consequence, or legally controlled work needs tighter limits and independent checks. The purpose is not to centralize every decision; it is to place decisions at the lowest competent level with appropriate assurance.

Span of Control and Field Presence

A supervisor responsible for too many people, contractors, locations, or simultaneous critical activities cannot observe or coach adequately. Span of control depends on task complexity, team experience, geography, communication, and hazard. Adjust shift structure, leading hands, control-room support, and work scheduling rather than pretending one supervisor can cover everything.

Visible felt leadership means leaders verify conditions, listen to workers, ask about critical controls, and close actions. A signature on a checklist is weak evidence if the pump is inaccessible, gas detector overdue for calibration, or ground support differs from design.

Stop-Work Authority

Every person should understand that imminent danger, missing isolation, failed critical control, unexpected ground, unsafe atmosphere, blast uncertainty, or uncontrolled water justifies stopping and escalating. A manager who rewards tonnes while penalizing delays sends a stronger message than a poster about safety. Performance systems should include control quality, hazard reporting, planned maintenance, and action closure.

Delegation Scenario

A mine manager assigns a junior engineer to “keep the pit dry” during a forecast typhoon. That instruction is defective. A defensible delegation identifies forecast trigger levels, inflow and storage model, duty and standby pumps, fuel or power security, safe access, pond limits, discharge conditions, inspection frequency, communication schedule, and the rainfall or water-level threshold requiring evacuation or management escalation.

If the engineer reports that the installed system cannot meet the design storm, the manager must act: reduce exposure, mobilize equipment, revise the plan, or suspend work. Delegating monitoring does not transfer accountability for an inadequate system.

Just Culture and Accountability

After an event, ask whether expectations were clear, the person was competent, resources were available, controls were usable, supervision was reasonable, and similar deviations were normalized. Deliberate violation may require discipline; human error calls for system improvement and learning. Blame alone prevents recurrence analysis.

On exam scenarios, identify who had authority, who was responsible for the task, who remained accountable for the system, what trigger was missed, and what verification should have occurred.

Verification Is Not Reperformance

A manager need not repeat every calculation, but must select verification proportionate to consequence: inspect critical assumptions, compare independent measurements, sample completed work, review exceptions, and confirm action closure. Delegation fails when reporting shows only favorable averages; require leading indicators and outliers, such as the highest sump level, overdue critical defects, unavailable standby capacity, and repeated control failures.