Study guide

14.2 Communication With Superiors, Peers & Subordinates

PRC Mining Engineer Licensure Examination Philippines

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Surface Mining Methods & Pit Optimization

1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits

2 Chapter 2: Underground Mining Methods & Strata Control

2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design

3 Chapter 3: Materials Handling, Equipment & Mine Economics

3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws

4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics

5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types

5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models

6 Chapter 6: Mineral Exploration, Geophysics & Core Logging

6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols

7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code

7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification

8 Chapter 8: Comminution, Sizing & Physical Mineral Separation

8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation

9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy

9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)

11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions

12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate

12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals

13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence

13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence

14 Chapter 14: Mine Organization, Communication & Accountable Leadership

14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability

15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics

15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity

16 Chapter 16: Applied Mathematics & Mine Surveying

16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness

17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions

17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review

18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments

18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments

19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards

19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation

20 Chapter 20: Metallurgy, Foundry Practice & Assaying

20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology

21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood

14.2 Communication With Superiors, Peers & Subordinates

Key Takeaways Explain This Topic AI

Effective mine communication is closed-loop: the sender states the message, the receiver confirms understanding, and the sender verifies the confirmation.

Shift handovers transfer hazards, equipment status, isolations, ground and ventilation changes, work permits, production state, and pending actions in a controlled record.

Escalation should follow risk and time, with immediate stop-work communication for imminent danger and traceable reporting for unresolved abnormal conditions.

Leaders create psychological safety when workers can report bad news, near misses, uncertainty, and production deviations without retaliation.

Maps, plans, permits, instructions, dashboards, and alarms require revision control, common terminology, timestamps, owners, and an authoritative source.

Last updated: August 2026

Mining work crosses shifts, elevations, contractors, disciplines, control rooms, and changing conditions. A message that is sent but not understood is not effective communication. Closed-loop communication requires the receiver to repeat or paraphrase the instruction and the sender to verify the response. It is especially important for blasting clearance, equipment movement, electrical isolation, ventilation change, emergency response, and survey set-out.

Match the Channel to Risk

  • Situation Appropriate approach Record
  • Imminent danger Stop work, alarm/radio, direct confirmation Incident or hazard record after control
  • Shift status Face-to-face handover plus controlled log Signed or acknowledged handover
  • Design change Approved drawing/model release and briefing Revision-controlled document
  • Routine coordination Meeting, dispatch system, work order Actions, owner, due date
  • Formal compliance Required report through designated authority Submission and receipt

A long email is unsuitable for an imminent fall-of-ground hazard. A radio call alone is unsuitable for changing a mine design. Use redundancy where consequence is high.

Structured Shift Handover

A handover should cover:

  • people underground or in active areas;
  • incidents, hazards, and changed ground conditions;
  • ventilation readings, gas alarms, fans, doors, and stoppings;
  • dewatering levels, pumps, rainfall, and water ingress;
  • equipment availability, defects, isolation, and permits;
  • blast status, misfires, exclusion zones, and re-entry;
  • production, development, grade, stockpile, and blend;
  • environmental controls, ponds, discharges, spills, and weather; and

incomplete work, responsible person, trigger, and deadline.

Conduct the handover at a time and place that permits questions. The outgoing supervisor should not leave before the incoming supervisor accepts critical status. Field verification is required when conditions cannot be represented reliably in a log.

Communicating Upward

Superiors need concise information for decisions: condition, evidence, consequence, controls in place, options, recommendation, and time required. Do not dilute a critical warning in routine data. If a production plan cannot be executed safely, state the constraint and the decision required. Preserve the escalation trail where the issue remains unresolved.

A useful format is SBAR :

Situation: what is happening now?

Background: what context matters?

Assessment: what does the evidence indicate?

Recommendation: what action and authority are needed?

Peer Interfaces

Cross-functional work needs shared definitions. “Ore,” “available,” “complete,” and “safe” can mean different things. Define measurement point, unit, time window, and acceptance criterion. When geology reports a grade, specify dry basis, support, assay cut-off, and model version. When maintenance reports availability, specify calendar, physical, or mechanical availability and excluded time.

Communicating With Subordinates

A pre-start brief should identify the task, roles, hazards, controls, changed conditions, simultaneous operations, emergency response, and stop-work expectation. Ask workers to explain the critical controls in their own words. Translation, diagrams, demonstrations, or a field walk may be needed; literacy or language assumptions create risk.

Leadership response determines future reporting. Punishing a person who reports a near miss encourages silence. Accountability remains necessary for reckless conduct, but distinguish error, at-risk behavior, system weakness, and intentional violation. Investigate what made the action reasonable at the time.

Document and Alarm Control

Use one authoritative source, revision identifier, approval, effective time, and distribution list. Remove superseded plans from field use. Dashboards should show data timestamp and sensor health. Alarm floods teach operators to ignore alarms; prioritize by consequence, rationalize setpoints, prevent nuisance activation, and require acknowledgment and response.

Closed-Loop Example

Controller: “Truck 27, hold at Bay 3; blast clearance is not complete.” Driver: “Holding Truck 27 at Bay 3 because blast clearance is incomplete.” Controller: “Correct; remain until I issue release.” This short exchange prevents a plausible but dangerous assumption.

The best exam answer identifies audience, urgency, channel, confirmation, record, and escalation.

Contractor Communication

Contract terms do not guarantee that contractor crews understand site controls. Include contractors in pre-starts, handovers, emergency drills, permit systems, and change notices; define which radio channel, language, supervisor, and document source govern. Verify competence and understanding in the field. When owner and contractor procedures conflict, stop and resolve the interface before work rather than expecting the worker to choose between two authorities.

Noise control: standardize routine reporting and reserve interruptive channels for urgent risk. If every message is marked critical, receivers cannot distinguish the one condition that requires immediate stop-work action.

Communication Is Also Configuration Control

A correct instruction can become unsafe when it refers to the wrong location, coordinate system, equipment, shift, or drawing revision. Include identity, place, time, condition, required action, limit, reason and acknowledgment for critical messages. After a change, withdraw superseded plans at field points and confirm that dispatch, permits, isolation records, survey set-out and contractor copies use the same approved revision.