Study guide
19.1 Solar-System Origin, Earth Interior & Atmospheric Layers
PRC Mining Engineer Licensure Examination Philippines
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Surface Mining Methods & Pit Optimization
1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits
2 Chapter 2: Underground Mining Methods & Strata Control
2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design
3 Chapter 3: Materials Handling, Equipment & Mine Economics
3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation
4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws
4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics
5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types
5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models
6 Chapter 6: Mineral Exploration, Geophysics & Core Logging
6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols
7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code
7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification
8 Chapter 8: Comminution, Sizing & Physical Mineral Separation
8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation
9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy
9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning
10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management
10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)
11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions
11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions
12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate
12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals
13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence
13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence
14 Chapter 14: Mine Organization, Communication & Accountable Leadership
14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability
15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics
15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity
16 Chapter 16: Applied Mathematics & Mine Surveying
16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness
17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions
17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review
18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments
18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments
19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards
19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation
20 Chapter 20: Metallurgy, Foundry Practice & Assaying
20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations
21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology
21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood
19.1 Solar-System Origin, Earth Interior & Atmospheric Layers
Key Takeaways Explain This Topic AI
The solar nebula model explains accretion of the Sun and planets from a rotating gas-and-dust disk about 4.6 billion years ago.
Early heating and differentiation separated dense metallic material into the core and lighter silicates into mantle and crust.
Compositional layers are crust, mantle and core; mechanical layers are lithosphere, asthenosphere, mesosphere, outer core and inner core.
Earthquake P waves travel through solids and liquids, while S waves do not travel through liquid; their behavior revealed the liquid outer core and internal boundaries.
The atmosphere is divided by temperature trend into troposphere, stratosphere, mesosphere and thermosphere, with most weather and mine-air interaction in the troposphere.
Last updated: August 2026
General geology begins at planetary scale because Earth's composition, heat, tectonics, atmosphere, water and mineral deposits are outcomes of its origin and evolution. The leading solar nebula model describes gravitational collapse of a cloud of gas and dust into a rotating disk about 4.6 billion years ago. Most mass formed the Sun; collisions and accretion built planetesimals and planets. Temperature in the disk helped separate rocky inner planets from volatile-rich outer bodies.
Accretion and Differentiation
Early Earth heated through impacts, compression, radioactive decay and segregation of dense material. Partial to extensive melting allowed differentiation :
- iron and nickel concentrated toward the core;
- magnesium- and iron-rich silicates dominated the mantle;
- lower-density silicate melts formed evolving crust; and
volcanic degassing and later inputs contributed to atmosphere and hydrosphere.
Differentiation explains why crustal ore deposits require concentration processes. Most metals are scarce in average crust, but magmatic, hydrothermal, sedimentary and weathering systems locally concentrate them to potentially economic levels.
Compositional Layers
- Layer Approximate character Mining relevance
- Continental crust Thicker, relatively felsic and lower density Hosts diverse mineral systems and old terranes
- Oceanic crust Thin, basaltic-gabbroic Ophiolites, VMS systems and subduction inputs
- Mantle Ultramafic silicate dominated Source of magma; exposed fragments weather to nickel laterite
- Core Iron-nickel, liquid outer and solid inner core Geodynamo and planetary differentiation
The Moho is the seismic boundary between crust and mantle. It is a compositional boundary, not simply the base of every rigid plate.
Mechanical Layers
Lithosphere: rigid crust plus uppermost mantle, broken into tectonic plates.
Asthenosphere: weaker, ductile upper mantle over which plates move; mostly solid, not a global liquid ocean.
Mesosphere/lower mantle: stronger under pressure yet convects over geologic time.
Outer core: liquid iron alloy.
Inner core: solid iron alloy due to immense pressure.
Pressure, temperature and material behavior all change with depth. “Solid” mantle can flow slowly over millions of years while transmitting seismic shear waves.
Seismic Evidence
P waves are compressional and travel through solids and liquids. S waves are shear waves and do not propagate through liquids. Refraction, reflection, velocity changes and shadow zones reveal internal boundaries. The absence of direct S waves through the outer core supports its liquid state; P-wave behavior constrains the core boundaries. Surface waves travel along Earth and often cause severe earthquake shaking.
Seismic tomography uses travel-time variations to image faster and slower regions that may reflect temperature, composition or phase. It is an inference with resolution limits, not a photograph of the mantle.
Magnetic Field and Heat Engine
Motion of conductive liquid iron in the outer core sustains the geodynamo and Earth's magnetic field. Internal heat drives mantle convection, melting and plate tectonics, while gravity drives slab sinking. These processes create arcs, rifts, collision zones and hydrothermal circulation associated with mineralization.
Atmospheric Layers
Atmospheric layers are classified by temperature trend:
Troposphere: temperature generally decreases with height; most mass, water vapor and weather occur here.
Stratosphere: temperature rises upward because ozone absorbs ultraviolet radiation.
Mesosphere: temperature declines upward; meteors commonly ablate here.
Thermosphere: temperature rises as high-energy radiation is absorbed; includes much of the ionosphere.
The thin exosphere grades into space. Boundaries are tropopause, stratopause and mesopause.
Mining Connections
Tropospheric rainfall controls runoff, slope pore pressure, pit inflow, tailings water balance and erosion. Atmospheric stability affects dust dispersion. Regional tectonics drives earthquakes and magmatic arcs, while mantle-derived ultramafic rocks become hosts to chromite and lateritic nickel.
Concept Trap
Do not match compositional and mechanical terms as if identical. The lithosphere includes crust and upper mantle; the asthenosphere is mantle. The outer core is liquid because S waves do not cross it, but the mantle remains mainly solid despite its capacity for slow flow.
Continental and Oceanic Contrast
Continental crust is commonly thicker, more compositionally diverse and less dense than oceanic crust, so it is less readily subducted. Oceanic lithosphere cools, thickens and becomes denser with age before subduction. At convergent margins, sediment, altered basalt and water-bearing minerals enter the system; devolatilization, mantle melting and crustal interaction help produce arc magma. This is a process chain, not a rule that every volcano or ore deposit sits directly above one slab point.
Evidence, Not Direct Access
Earth's internal layers are inferred by combining seismic travel times and shadow zones with gravity, moment of inertia, magnetic behavior, high-pressure experiments and meteorite composition. Each observation constrains a model; no borehole reaches the mantle or core. On exam questions, distinguish a compositional boundary from a change in mechanical behavior and identify which wave or physical property supplies the evidence.