Study guide

20.1 Extractive, Physical & Adaptive Metallurgy Principles

PRC Mining Engineer Licensure Examination Philippines

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Surface Mining Methods & Pit Optimization

1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits

2 Chapter 2: Underground Mining Methods & Strata Control

2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design

3 Chapter 3: Materials Handling, Equipment & Mine Economics

3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws

4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics

5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types

5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models

6 Chapter 6: Mineral Exploration, Geophysics & Core Logging

6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols

7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code

7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification

8 Chapter 8: Comminution, Sizing & Physical Mineral Separation

8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation

9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy

9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)

11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions

12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate

12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals

13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence

13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence

14 Chapter 14: Mine Organization, Communication & Accountable Leadership

14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability

15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics

15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity

16 Chapter 16: Applied Mathematics & Mine Surveying

16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness

17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions

17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review

18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments

18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments

19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards

19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation

20 Chapter 20: Metallurgy, Foundry Practice & Assaying

20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology

21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood

20.1 Extractive, Physical & Adaptive Metallurgy Principles

Key Takeaways Explain This Topic AI

Extractive metallurgy recovers metals through mineral processing, pyrometallurgy, hydrometallurgy and electrometallurgy, selected from mineralogy and product requirements.

Physical metallurgy relates composition, processing, microstructure and properties through phase transformation, deformation, heat treatment and testing.

Thermodynamics indicates whether a reaction can proceed and equilibrium tendency; kinetics and transport determine how fast and completely it proceeds in real equipment.

Mass and energy balances, slag and gas handling, refractory selection, corrosion, impurity control, safety and environmental performance govern practical process selection.

Adaptive metallurgy tailors and integrates routes to variable feed, local infrastructure, changing products, circularity and recovery from complex or secondary materials.

Last updated: August 2026

Metallurgy converts mineral feed into a useful metal, alloy or chemical product and controls the properties of that product. The TOS expects candidates to distinguish extractive, physical and adaptive concepts rather than treating all metal processing as “smelting.”

Extractive Metallurgy

A flowsheet may combine:

  • mineral processing: liberation and concentration without producing metal;
  • pyrometallurgy: high-temperature reactions such as roasting, calcining, smelting and converting;
  • hydrometallurgy: leaching, solution purification and precipitation; and

electrometallurgy: electrowinning from solution or electrorefining an impure anode.

Mineralogy controls route. Sulfide copper concentrate may be smelted and converted to blister copper before electrorefining. Oxide copper may be acid-leached, purified by solvent extraction and electrowon. Gold may be cyanide-leached and recovered on carbon or by zinc precipitation. Nickel laterite limonite can undergo HPAL, while saprolite may be treated pyrometallurgically. These are examples, not interchangeable recipes.

Thermodynamics and Kinetics

A negative Gibbs free-energy change under stated conditions indicates thermodynamic favorability: Δ G = Δ H − T Δ S \Delta G=\Delta H-T\Delta S Δ G = Δ H − T Δ S

Equilibrium diagrams and oxygen-potential relations help select temperature, atmosphere and reductant. Thermodynamics does not state reaction rate. Kinetics depends on temperature, surface area, diffusion, mixing, nucleation and catalysts. A favorable reaction can be impractically slow or mass-transfer limited.

The Arrhenius relation is: k = A e − E a / ( R T ) k=Ae^{-E_a/(RT)} k = A e − E a ​ / ( RT )

Increasing temperature generally raises rate, but can increase energy cost, corrosion, volatilization, side reactions or refractory wear.

Pyrometallurgical Unit Operations

Drying: removes free moisture.

Calcination: drives off bound water or carbon dioxide, commonly without melting.

Roasting: reacts concentrate with gas, often oxidizing sulfides and producing sulfur dioxide.

Smelting: melts and separates metal/matte from slag through chemical reaction and density.

Converting/refining: removes iron, sulfur and impurities and upgrades product.

Slag must collect gangue and unwanted oxides while maintaining fluidity, manageable melting temperature, refractory compatibility and low valuable-metal loss. Gas cleaning and sulfur capture are integral to the process.

  • Hydrometallurgical Sequence
  • prepare and condition feed;
  • leach target metal;
  • separate pregnant solution from residue;
  • purify and concentrate by precipitation, ion exchange, solvent extraction or adsorption;
  • recover product by crystallization, precipitation or electrowinning; and

recycle solution and manage residue.

Selectivity, reagent consumption, water balance, impurity buildup, residue stability and effluent control matter as much as extraction percentage.

Physical Metallurgy

Physical metallurgy links composition + processing -> microstructure -> properties -> performance . Crystal structure, grains, phases, defects, dislocations, precipitates and texture influence strength, hardness, toughness, ductility, wear and corrosion.

Heat treatment examples:

  • annealing reduces hardness and relieves stress;
  • normalizing refines steel structure;
  • quenching can form hard martensite;
  • tempering reduces brittleness and adjusts strength/toughness; and

precipitation hardening forms fine strengthening particles.

A hard component is not automatically durable; excessive hardness can reduce toughness and increase brittle failure under impact. Mine equipment selection balances abrasion, impact, fatigue, corrosion, weldability and repair.

Adaptive Metallurgy

The official TOS uses “adaptive metallurgy” in connection with physical metallurgy. In practice, adaptation means selecting and modifying routes as feed and constraints change: blending oxide and sulfide domains appropriately, adding ore sorting, recovering a by-product, reprocessing tailings, using secondary materials, or changing product specification. Adaptation still requires testwork and controlled scale-up.

Balance and Safety

For steady state, input mass equals product, slag/residue, gas/dust and inventory change. An apparent recovery above 100% indicates sampling, moisture, assay or inventory error. Energy balance includes feed enthalpy, fuel/electricity, reaction heat, off-gas, cooling and losses.

Hazards include molten-material contact with water, toxic gas, pressure, dust, high voltage, acids, cyanide, oxygen deficiency, combustible gas and hot surfaces. Design isolation, containment, ventilation, monitoring, compatible materials, emergency quench where appropriate, and safe maintenance.

The best process is the route that produces a saleable product safely and reliably from the actual mineralogy while controlling energy, cost, impurity, residue and environmental obligations.

  • Electrometallurgy Check
  • Faraday's law links deposited mass to charge: m = I t M η n F m=\frac{ItM\eta}{nF} m = n F I tM η ​

where current I I I flows for time t t t , M M M is molar mass, n n n electrons per metal ion, F F F Faraday's constant and η \eta η current efficiency. The equation provides a theoretical production check for electrowinning. Actual cell voltage, current efficiency, short circuits, impurity, electrode area, electrolyte temperature and mass transfer determine energy and product quality. A current reading alone is not metal production unless time, valence and efficiency are known.

Scale-Up Requires Evidence

A bench result is not a plant guarantee. Preserve representative feed mineralogy and variability, then progress through controlled tests, pilot work or demonstrated analogues as consequence requires. Reconcile mass, metal, water, energy and impurity deportment at every scale. Define acceptance criteria for throughput, recovery, product quality, residue stability, materials compatibility, emissions, operability and safety before committing equipment.