Study guide

20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

PRC Mining Engineer Licensure Examination Philippines

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Surface Mining Methods & Pit Optimization

1.1 Surface Mining Unit Operations & Method Selection 1.2 Bench Geometry, Slope Stability & Geotechnical Pit Design 1.3 Cut-Off Grade Optimization & Lerchs-Grossmann Pit Limits

2 Chapter 2: Underground Mining Methods & Strata Control

2.1 Underground Mining Method Classification & Selection 2.2 Rock Mechanics, Stress Analysis & Strata Control 2.3 Underground Ground Support Systems & Excavation Design

3 Chapter 3: Materials Handling, Equipment & Mine Economics

3.1 Drilling, Blasting & Explosives Engineering 3.2 Mine Loading, Haulage & Materials Handling Systems 3.3 Mine Capital (CAPEX), Operating Costs (OPEX) & Financial Evaluation

4 Chapter 4: Mine Safety, Ventilation & Philippine Mining Laws

4.1 Mine Ventilation Network Analysis & Environmental Quality 4.2 Philippine Mine Safety Rules, Health & Disaster Prevention 4.3 Philippine Mining Act of 1995 (RA 7942), DAO 2010-21 & Mining Ethics

5 Chapter 5: Physical Geology, Mineralogy & Philippine Deposit Types

5.1 Structural Geology, Tectonics & Ore Controls 5.2 Igneous, Metamorphic & Sedimentary Ore Mineralogy 5.3 Major Philippine Ore Deposit Models

6 Chapter 6: Mineral Exploration, Geophysics & Core Logging

6.1 Geochemical & Remote Sensing Exploration Techniques 6.2 Geophysical Exploration Methods in Mining Geology 6.3 Diamond Drilling, Core Logging & QA/QC Protocols

7 Chapter 7: Geostatistics, Resource Estimation & PMRC Code

7.1 Ore Body Block Modeling & Spatial Variography 7.2 Inverse Distance & Ordinary Kriging Grade Estimation 7.3 Philippine Mineral Reporting Code (PMRC 2020) & Resource Classification

8 Chapter 8: Comminution, Sizing & Physical Mineral Separation

8.1 Crushing, Grinding & Bond Work Index Calculations 8.2 Particle Screening, Hydrocyclone Classification & Sizing 8.3 Gravity Concentration & Magnetic/Electrostatic Separation

9 Chapter 9: Froth Flotation & Extractive Hydrometallurgy

9.1 Froth Flotation Chemistry, Reagents & Cell Kinetics 9.2 Leaching Technologies (Heap, Agitation & Tank) 9.3 Precious Metal Recovery: CIP, CIL, Merrill-Crowe & Electrowinning

10 Chapter 10: Process Plant Flowsheets & Environmental Tailings Management

10.1 Metallurgical Plant Flowsheets & Pulp Mass Balances 10.2 Tailings Storage Facility (TSF) Design & Dam Safety 10.3 Acid Mine Drainage (AMD) Mitigation & Environmental Protection (EPEP/FMR/DP)

11 Chapter 11: 2025 PRC Blueprint, Prospecting Tools & Exploration Decisions

11.1 Official 2025 TOS, Three-Paper Structure & Exam Strategy 11.2 Prospecting Instruments, Base Maps & Surface Geological Mapping 11.3 Integrating Direct and Indirect Evidence for Exploration Decisions

12 Chapter 12: Mine Infrastructure, Sustainable Development & Climate

12.1 Power, Water, Drainage & Support-Facility Selection 12.2 Sustainable Development, Progressive Rehabilitation & Community Impact 12.3 Mining, Climate, Reforestation, Coal & Energy-Transition Minerals

13 Chapter 13: Mine Valuation, Financial Analysis & Due Diligence

13.1 Time Value of Money, Future Value & Present Value 13.2 Financial Statements, Mine Economics & External Price Drivers 13.3 Exploration Provenance, Technical Review & Legal Due Diligence

14 Chapter 14: Mine Organization, Communication & Accountable Leadership

14.1 Line and Staff Functions in a Mining Organization 14.2 Communication With Superiors, Peers & Subordinates 14.3 Authority, Responsibility, Delegation & Safety Accountability

15 Chapter 15: Philippine Mining Law, Indigenous Rights & Professional Ethics

15.1 Legal Hierarchy, Mineral Tenure & Compliance Analysis 15.2 Constitutional Participation, IPRA, FPIC & Ancestral Domains 15.3 RA 4274, Professional Scope, Ethics & Document Integrity

16 Chapter 16: Applied Mathematics & Mine Surveying

16.1 Engineering Mathematics for Safe, Efficient Mine Decisions 16.2 Survey Control, Instruments, Traverses & Error Adjustment 16.3 Topographic Maps, Underground Set-Out & Survey Timeliness

17 Chapter 17: Feasibility Studies, Data Quality & Project Decisions

17.1 Scoping, Pre-Feasibility & Final Feasibility Study Maturity 17.2 Data Accuracy, Assumption Control & Go/No-Go Decisions 17.3 Multidisciplinary Integration, Interfaces & Independent Review

18 Chapter 18: Mining Computer Applications, Digital Control & Global Developments

18.1 Computer Functions, Office Applications & Data Governance 18.2 Geological Modeling, Mine Planning, Scheduling & Valuation Software 18.3 Real-Time Control, Critical Minerals & Regional Mining Developments

19 Chapter 19: Earth Systems, Geologic Time & Philippine Hazards

19.1 Solar-System Origin, Earth Interior & Atmospheric Layers 19.2 Rock Cycle, Landforms & the Geologic Time Scale 19.3 Philippine Tectonics, Geologic Hazards & Mitigation

20 Chapter 20: Metallurgy, Foundry Practice & Assaying

20.1 Extractive, Physical & Adaptive Metallurgy Principles 20.2 Foundry Materials, Casting, Solidification & Defects 20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

21 Chapter 21: Solid–Liquid Separation, Environmental Law & Mine Ecology

21.1 Thickening, Filtration & Solid–Liquid Separation 21.2 Philippine Air, Water, Waste & Hazardous-Substance Controls 21.3 Mine Ecology, Closure, Tailings, Waste & Community Livelihood

20.3 Sampling, Fire Assay, Cupellation, Parting & Assay Calculations

Key Takeaways Explain This Topic AI

Assay accuracy begins with a representative sample; crushing, splitting, pulverizing, labeling, security and contamination control are as important as the final measurement.

Fire assay collects precious metals into a lead button during fusion, then cupellation oxidizes and absorbs lead to leave a precious-metal bead.

Flux roles include collectors, oxidants, reductants, basic and acidic components, fluidizers and protective additions selected for sample mineralogy.

Parting separates gold from silver after weighing the combined bead, allowing calculation of gold and silver content on the stated mass and moisture basis.

Certified reference materials, blanks, duplicates, repeats, balances, furnace control and gravimetric or instrumental finish checks detect bias, contamination and imprecision.

Last updated: August 2026

An assay result describes the submitted sample, not automatically the entire orebody, stockpile or shipment. Sampling error commonly exceeds analytical error because valuable minerals are heterogeneous and gold can occur as rare coarse particles. The chain must preserve representativeness, identity and mass.

Sampling and Preparation

A defensible protocol defines lot, increment selection, sample mass, top size, frequency, tools, moisture, and compositing. Avoid grab samples for grade estimation where they favor visible mineralization. Channel samples use consistent geometry; drill core is split according to orientation and recovery controls; moving streams are sampled across the full stream where possible.

Laboratory preparation typically includes:

  • receive, inventory and dry as specified;
  • crush to a controlled passing size;
  • homogenize and split with a riffle or rotary divider;
  • pulverize an aliquot to required fineness;
  • split the assay charge; and

retain coarse reject and pulp under controlled storage.

Clean equipment between samples and order batches to detect carryover. A fine blank after high-grade material tests contamination.

Fire-Assay Fusion

For gold and silver, a weighed sample charge is mixed with flux and fused in a crucible. The objective is two liquid phases:

a dense lead collector that scavenges precious metals; and

a fluid slag that captures gangue and base-metal oxides.

Flux formulation responds to ore chemistry:

  • Component/function Role
  • Litharge, PbO Lead source and collector after reduction
  • Sodium carbonate Basic flux for acidic gangue
  • Silica Acidic flux for basic oxides
  • Borax Lowers melting temperature and improves slag fluidity
  • Flour/charcoal Reductant controlling lead-button size
  • Niter, KNO3 Oxidant for sulfide or reducing samples

Too much reductant creates an oversized button; too little can produce inadequate collection. Sulfide-rich samples may need roasting or oxidizing flux. Fusion must avoid boilover and ensure clean separation when poured into a mold.

Cupellation

The cleaned lead button is placed in a porous cupel and heated in an oxidizing furnace. Lead oxidizes to litharge; much is absorbed into the cupel and some volatilizes under controlled ventilation. Base metals oxidize while gold and silver remain as a doré bead.

Cupellation temperature matters. Too cold can freeze litharge or retain lead; too hot can increase precious-metal loss, cupel attack or volatilization. “Feathering” of litharge and the brightening stage are operational observations, but final quality is confirmed by method controls. Lead fumes and contaminated cupels require stringent occupational and waste controls.

Parting and Calculation

For a gravimetric gold finish, weigh the cleaned combined gold-silver bead, flatten or roll it, and dissolve silver in nitric acid under the method conditions. Wash, anneal and weigh the remaining gold. Difference gives silver after applicable blank and correction.

If a 30.00-g sample yields 0.0060 g gold after parting: G r a d e = 0.0060 g 30.00 g × 10 6 = 200 g / t Grade=\frac{0.0060\ g}{30.00\ g}\times10^6=200\ g/t G r a d e = 30.00 g 0.0060 g ​ × 1 0 6 = 200 g / t

Because 1 g/t equals 1 microgram per gram, multiplying the mass fraction by one million gives g/t. Such a high result should trigger the high-grade protocol and check for weighing, transcription or contamination.

An instrumental finish may dissolve the bead and measure gold by atomic absorption or ICP, improving sensitivity for low grades. State the finish, charge mass and detection range.

QA/QC

Certified reference material: tests accuracy/bias near relevant grades and matrices.

Blank: tests contamination and sample carryover.

Coarse duplicate: tests crushing and splitting plus analysis.

Pulp duplicate: tests pulverized-sample and analytical precision.

Field duplicate: includes field heterogeneity and sampling.

Umpire assay: independent laboratory comparison.

Plot control results in sequence. A standard outside acceptance limits requires investigation of the affected batch, not deletion of the standard. Duplicate scatter may reflect coarse gold; use appropriate protocols such as larger charge or screen fire assay when justified.

Common Errors

Mislabeling, wet/dry-basis confusion, loss of fines, contamination, incomplete fusion, prill loss, cupellation loss, balance drift, wrong dilution, transposed units and result clipping can bias grade. Chain of custody preserves identity but does not prove representativeness.

Exam Trap

The analytical method cannot correct a biased sample. Choose the answer that controls the entire chain—lot definition, sampling, preparation, fusion, measurement, calculation and QA/QC.

Reporting Basis

State whether a result is g/t, mg/kg, percent, troy ounce per short ton, or another unit, and whether the mass basis is dry. One g/t equals one mg/kg. Never treat ppm in water automatically as ppm in solids without recognizing the mass/volume convention. Preserve unrounded bead and sample weights through calculation, then round to method precision and report detection or quantitation limits.