Study guide
1.5 Laboratory Safety: Chemical, Fire, Electrical, Biological, and Physical Hazards
Philippine Medical Technologists Licensure Examination MTLE
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Clinical Chemistry: Laboratory Operations, Instrumentation, Reagents, Quality Assurance, and Safety
1.1 Specimen Collection, Preanalytical Variables, and Interferences 1.2 Clinical Chemistry Instrumentation, Photometry, and Automation 1.3 Quality Control, Westgard Rules, Calibration, and Laboratory Mathematics 1.4 Reagent Preparation, Laboratory Water, Glassware, Pipettes, and Centrifuges 1.5 Laboratory Safety: Chemical, Fire, Electrical, Biological, and Physical Hazards
2 Chapter 2: Clinical Chemistry: Carbohydrates, Lipids, Proteins, Non-Protein Nitrogen, and Liver Function
2.1 Glucose Homeostasis, Diagnostic Criteria for Diabetes Mellitus, and Glycemic Monitoring 2.2 Lipids, Lipoproteins, Apolipoproteins, and Coronary Heart Disease Risk Assessment 2.3 Serum Proteins, Albumin, Globulins, and Serum Protein Electrophoresis Patterns 2.4 Non-Protein Nitrogen Compounds: Urea, Creatinine, Uric Acid, and Renal Function 2.5 Liver Function Tests, Bilirubin Metabolism, and Jaundice
3 Chapter 3: Clinical Chemistry: Electrolytes, Blood Gases, Enzymology, Endocrinology, and Toxicology
3.1 Water Balance, Electrolytes, Osmolality, and Anion Gap Calculations 3.2 Blood Gas Analysis, Oxygenation, and Acid-Base Homeostasis 3.3 Clinical Enzymology: Enzyme Kinetics, Cardiac Biomarkers, and Hepatic and Pancreatic Enzymes 3.4 Endocrinology: Hormone Physiology and Endocrine Function Testing 3.5 Therapeutic Drug Monitoring and Clinical Toxicology
4 Chapter 4: Bacteriology: Specimen Management, Media, Staining, and Biosafety
4.1 Specimen Collection, Transport, Processing, and Microscopic Staining 4.2 Culture Media Classification, Quality Control, and Inoculation Techniques 4.3 Sterilization, Disinfection, Decontamination, and Biosafety Containment 4.4 Antimicrobial Susceptibility Testing Methods, Standardization, and Resistance Mechanisms
5 Chapter 5: Diagnostic Bacteriology: Major Pathogenic Bacteria
5.1 Medically Important Gram-Positive Cocci: Staphylococci, Streptococci, and Enterococci 5.2 Medically Important Gram-Negative Bacilli: Enterobacterales and Non-Fermenters 5.3 Fastidious, Microaerophilic, and Anaerobic Bacteria 5.4 Mycobacteria, Spirochetes, Atypical Bacteria, and Public Health Microbiology
6 Chapter 6: Medical Parasitology, Mycology, and Diagnostic Virology
6.1 Stool Examination Techniques and Intestinal Nematodes 6.2 Tissue Nematodes, Filarial Worms, Cestodes, and Trematodes 6.3 Medical Protozoology: Intestinal, Urogenital, and Blood/Tissue Protozoa 6.4 Medical Mycology: Yeasts, Dermatophytes, Dimorphic Fungi, and Opportunistic Molds 6.5 Clinical Virology: Viral Structure, Specimen Handling, and Diagnostic Methods
7 Chapter 7: Hematology: Specimen Collection, Routine Parameters, Instrumentation, and Manual Methods
7.1 Blood Specimen Collection, Anticoagulants, Preanalytical Variables, and Specimen Quality 7.2 Automated Cell Counting Principles, Complete Blood Count Parameters, and Erythrocyte Indices 7.3 Reticulocyte Evaluation, Supravital Staining, and Erythrocyte Sedimentation Rate 7.4 Manual Cell Counts, Manual Hemoglobin Methods, and Hematology Quality Control
8 Chapter 8: Hematology: Blood Cell Morphology, Bone Marrow, and Hematologic Disorders
8.1 Normal Erythropoiesis and Erythrocyte Morphologic Abnormalities 8.2 Anemias: Classification, Iron Deficiency, Megaloblastic, Hemolytic, and Hemoglobinopathies 8.3 Normal Leukopoiesis, Leukocyte Differential, and Non-Malignant White Cell Alterations 8.4 Hematologic Malignancies: Acute and Chronic Leukemias, Myeloproliferative and Lymphoproliferative Disorders 8.5 Peripheral Blood Smear Preparation and Staining, Bone Marrow Examination, and Cytochemistry
9 Chapter 9: Hemostasis: Coagulation and Platelet Function Testing and Hemostatic Disorders
9.1 Mechanisms of Primary and Secondary Hemostasis, Fibrinolysis, and Natural Inhibitors 9.2 Coagulation Laboratory Testing: PT/INR, aPTT, Fibrinogen, Thrombin Time, and Mixing Studies 9.3 Hemostatic and Thrombotic Disorders: Hemophilias, von Willebrand Disease, DIC, and Thrombophilias 9.4 Bleeding Time, Clotting Time, Platelet Function, and Special Hematology Tests
10 Chapter 10: Immunohematology: Blood Group Systems and Antiglobulin Testing
10.1 The ABO Blood Group System, Genetics, Subgroups, and Forward/Reverse Typing Discrepancies 10.2 The Rh Blood Group System, Weak D Testing, and Other Major Blood Group Systems 10.3 Antiglobulin Testing, Elution, Adsorption, and Special Antibody Procedures
11 Chapter 11: Blood Banking: Donor Operations, Component Therapy, and Adverse Reactions
11.1 Donor Selection, Physical Examination, Screening, and Mandatory Infectious Marker Testing 11.2 Blood Component Preparation, Storage, Expiration, and Indications for Transfusion 11.3 Pre-Transfusion Compatibility Testing and Transfusion Reactions 11.4 Hemolytic Disease of the Fetus and Newborn (HDFN) and Rh Immune Globulin
12 Chapter 12: Clinical Serology and Immunology
12.1 Principles of Immunology: Antigens, Antibodies, Complement, and Immune Responses 12.2 Serologic Testing Methodologies: Agglutination, Precipitation, Flocculation, and Labeled Immunoassays 12.3 Infectious Disease Serology: Syphilis, Viral Hepatitis Markers, HIV, Dengue, and Febrile Agglutinins 12.4 Autoimmune Serology, Hypersensitivity, Immunodeficiencies, and Histocompatibility (HLA)
13 Chapter 13: Clinical Microscopy: Urinalysis and Renal Pathology
13.1 Renal Physiology, Urine Formation, and Physical Examination of Urine 13.2 Chemical Examination of Urine: Reagent Strip Principles, Interferences, and Confirmatory Tests 13.3 Microscopic Examination of Urine Sediment: Cells, Casts, Crystals, and Contaminants 13.4 Renal Calculi, Glomerular/Tubular/Interstitial Renal Diseases, and Urinalysis Quality Control
14 Chapter 14: Clinical Microscopy: Body Fluids, Fecal Analysis, and Gastric, Duodenal, and Respiratory Specimens
14.1 Cerebrospinal Fluid Analysis: Collection, Cell Counts, Chemistry, and Microbiology 14.2 Serous Fluids (Pleural, Pericardial, Peritoneal: Transudates vs Exudates) and Synovial Fluid Analysis 14.3 Seminal Fluid and Amniotic Fluid Analysis 14.4 Fecal Analysis: Macroscopic, Microscopic, and Chemical Examination of Stool 14.5 Gastric Fluid, Duodenal Contents, Sputum, and Bronchoalveolar Specimens
15 Chapter 15: Histopathologic Techniques and Cytotechnology
15.1 Tissue Preservation, Fixation, Decalcification, and Processing Steps 15.2 Microtomy, Sectioning Artifacts, Hematoxylin and Eosin Staining, and Special Stains 15.3 Cytotechnology: Specimen Collection, Fixation, Papanicolaou Staining, and the Bethesda System 15.4 Special Procedures: Frozen Sections, Special Embedding, Immunohistochemistry, Electron Microscopy, Autopsy, Museum Techniques, and Laboratory Records
16 Chapter 16: Medical Technology Laws, Related Laws, and Ethics
16.1 Republic Act No. 5527 (The Philippine Medical Technology Act of 1969) and Key Amendments 16.2 Related Philippine Healthcare Laws, Code of Ethics, and Bioethics
1.5 Laboratory Safety: Chemical, Fire, Electrical, Biological, and Physical Hazards
Key Takeaways Explain This Topic AI
Under GHS, every hazardous chemical has a 16-section Safety Data Sheet, and labels use the signal word Danger for severe hazards and Warning for less severe ones.
In the NFPA 704 diamond, blue is health, red is flammability, yellow is instability, and white is special hazards, each rated from 0 to 4.
Concentrated acid is always added slowly to water, never water to acid, and eyes are flushed at an eyewash station for at least 15 minutes.
Class C fires involve energized electrical equipment and are fought with CO2 or dry chemical extinguishers, never water.
Fire response follows RACE (rescue, alarm, contain, extinguish or evacuate), and extinguishers are used by PASS (pull, aim, squeeze, sweep).
Last updated: October 2026
Laboratory Safety: Chemical, Fire, Electrical, Biological, and Physical Hazards
Laboratory safety carries 5% of the Clinical Chemistry blueprint, and safety principles also appear in microbiology, blood banking, and histopathology questions. In the Philippines, workplace safety is governed by the Occupational Safety and Health Standards Law (RA 11058, 2018) and its implementing rules (DOLE Department Order No. 198, series of 2018). Fire safety follows the Fire Code of the Philippines (RA 9514), and health care waste follows the DOH health care waste management manual covered in the microbiology biosafety section. This section covers chemical hazard communication, chemical storage and spills, fire and electrical safety, compressed gases, biological exposures, radiation, and ergonomics.
- 1. Hazard Communication
- Safety Data Sheets (SDS)
Every hazardous chemical in the laboratory must have a Safety Data Sheet that staff can reach during their shift. Under the Globally Harmonized System of Classification and Labelling of Chemicals (GHS), the SDS has 16 standard sections , including identification, hazard identification, composition, first-aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protective equipment, physical and chemical properties, stability and reactivity, and toxicological information.
GHS Labels
A GHS label shows a product identifier, a signal word ( "Danger" for more severe hazards and "Warning" for less severe ones), hazard statements, precautionary statements, supplier information, and pictograms .
Examples of pictograms: flame (flammables), flame over circle (oxidizers), exploding bomb (explosives), corrosion (skin corrosion and eye damage), gas cylinder (gases under pressure), skull and crossbones (severe acute toxicity), exclamation mark (irritants and less severe toxicity), health hazard silhouette (carcinogens, mutagens, respiratory sensitizers), and environment (aquatic toxicity).
NFPA 704 Diamond
The National Fire Protection Association diamond tells emergency responders the hazards of a material at a glance. Each quadrant is rated from 0 (minimal) to 4 (severe) :
- Quadrant Color Hazard
- Left Blue Health
- Top Red Flammability
- Right Yellow Instability / reactivity
Bottom White Special hazards: W with a line through it (reacts with water), OX (oxidizer), SA (simple asphyxiant gas)
2. Chemical Handling, Storage, and Spills
Storage: Segregate incompatible chemicals. Keep acids away from bases, oxidizers away from flammables and organic materials, and store flammable liquids in an approved flammable-storage cabinet. Store heavy containers and corrosives on low shelves, never above eye level.
Dilution rule: Always add acid to water , slowly, never water to acid. Adding water to concentrated acid can boil the water locally and spatter acid.
Fume hoods: Volatile, toxic, or flammable chemicals such as formaldehyde, xylene, and concentrated acids are handled in a chemical fume hood with the sash lowered. Perchloric acid needs a special wash-down hood because it forms explosive perchlorates in ductwork.
Specific hazards:
Sodium azide (a preservative in some reagents) reacts with lead and copper plumbing to form explosive metal azides. Flush drains with large volumes of water if disposal by drain is allowed.
Picric acid becomes explosive when dry and must be kept wet.
Formaldehyde is a carcinogen and sensitizer, and xylene is a neurotoxic solvent. Exposure is reduced with ventilation and monitored as required.
Mercury spills are collected with a mercury spill kit, never with a vacuum cleaner.
Spills: Alert others, contain the spill, and use the appropriate kit. Acid spills are neutralized with sodium bicarbonate; alkali spills are neutralized with a weak acid such as citric acid or a commercial neutralizer.
Eye and skin exposure: Flush eyes at an eyewash station for at least 15 minutes , holding the eyelids open. Use a safety shower for large skin splashes and remove contaminated clothing.
- 3. Fire Safety
- Fire Classes and Extinguishers
- Class Burning Material Suitable Extinguisher
- A Ordinary combustibles: paper, wood, cloth, plastics Water, ABC dry chemical
- B Flammable liquids and gases: alcohol, xylene, acetone CO2, dry chemical, foam
- C Energized electrical equipment CO2 or dry chemical (non-conducting); never water
- D Combustible metals: sodium, potassium, magnesium Dry powder agents made for metal fires
- K Cooking oils and fats Wet chemical
A multipurpose ABC dry chemical extinguisher covers most laboratory fires.
RACE and PASS
RACE: R escue anyone in immediate danger, sound the A larm, C ontain the fire by closing doors, then E xtinguish a small fire or E vacuate.
PASS: P ull the pin, A im at the base of the fire, S queeze the handle, and S weep from side to side.
If clothing catches fire: stop, drop, and roll, or use a fire blanket or safety shower.
4. Electrical Safety and Compressed Gases
Use grounded (three-prong) plugs , avoid extension cords for permanent equipment, keep liquids away from outlets, and unplug equipment before servicing it. Report frayed cords and equipment that sparks or shocks.
Electric shock victim: Do not touch the person until the power is off. Turn off the source or move the person with a non-conducting object, then call for help and start resuscitation if needed.
Compressed gas cylinders: Keep them upright and secured with chains or straps, keep the valve cap on when not in use, move them only on a cylinder cart, and store them away from heat.
5. Biological Safety and Exposure Response
Standard precautions treat all blood and body fluids as potentially infectious: gloves, gowns, and eye or face protection as the task requires, hand hygiene, and no eating, drinking, smoking, applying cosmetics, or handling contact lenses in the work area.
Sharps: Never recap a used needle by hand (use a one-handed scoop technique only when recapping is unavoidable), and place sharps immediately in a puncture-resistant container that is replaced when three-quarters full.
Needlestick or splash exposure: Wash the wound with soap and water (or flush mucous membranes with water), report immediately, and have the source patient tested with consent. HIV post-exposure prophylaxis should start as soon as possible, ideally within hours and no later than 72 hours. A worker not immune to hepatitis B may need hepatitis B immune globulin and vaccination.
Biosafety levels, biological safety cabinets, and waste segregation are covered in the microbiology sterilization and biosafety section.
6. Radiation, Physical Hazards, and Ergonomics
Radiation: Radioactive materials (now rare in clinical labs since radioimmunoassay was largely replaced) are regulated by the Philippine Atomic Energy Regulatory Authority (PhilATOM). RA 12305 (2025) created PhilATOM and transferred to it the regulatory functions previously held by the Philippine Nuclear Research Institute (PNRI) and the FDA's radiation regulation office. Protection rests on time, distance, and shielding , with personal dosimeters for monitored workers.
Physical hazards: Centrifuges must be balanced with the lid closed until the rotor stops. Autoclaves, hot plates, and liquid nitrogen require heat- or cold-resistant gloves and face protection.
Ergonomics: Repetitive pipetting and microscope work cause strain injuries. Adjust chair and microscope height, use electronic or low-force pipettes, and take short breaks.
Incident reporting: Every accident, exposure, and near miss is reported and documented so the cause can be corrected.