Study guide
6.2 Sensitometric Curve (H&D Curve), Film Speed & Contrast Characteristics
Philippine Radiologic Technologists Licensure Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Subject 1, Chapter 1: Physics of Radiology & X-Ray Production
1.1 Atomic Structure, Electromagnetic Spectrum & X-Ray Production Mechanisms 1.2 X-Ray Tube Components, Target Interactions & Emission Spectrum 1.3 Photon Interactions with Matter: Photoelectric, Compton, Coherent & Pair Production
2 Subject 1, Chapter 2: Radiographic Equipment & Circuitry
2.1 High-Voltage Generators, Transformers & Rectification Circuits 2.2 Automatic Exposure Control (AEC), Beam Restriction & Quality Control 2.3 Tube Rating Charts, Extending Tube Life, Mechanical Malfunction & Preventive Maintenance
3 Subject 1, Chapter 3: Radiobiology & Cellular Response
3.1 Radiation Interaction with Tissue, Direct/Indirect Action & LET/RBE 3.2 Law of Bergonie & Tribondeau, Deterministic vs. Stochastic Effects 3.3 Dose-Response Relationships, Embryo and Fetal Effects & Acute Radiation Syndrome
4 Subject 1, Chapter 4: Radiation Protection & Dose Limits
4.1 ALARA Principles, Structural Shielding & Dose Limits 4.2 Personnel Dosimetry & Patient Dose Reduction Techniques 4.3 Dose Calculation Problems: Time, Distance, Shielding & Structural Barrier Design
5 Subject 1, Chapter 5: Imaging Informatics & Quality Assurance
5.1 PACS Architecture, DICOM Standards & HL7 Integration 5.2 Quality Assurance & Quality Control Protocols in Diagnostic Radiography 5.3 Radiology Workflow, RIS/HIS Integration, Teleradiology & Informatics Quality Assurance
6 Subject 2, Chapter 6: Film-Screen Radiography & Sensitometry
6.1 Film Emulsion, Latent Image Formation & Darkroom Chemistry 6.2 Sensitometric Curve (H&D Curve), Film Speed & Contrast Characteristics 6.3 Radiographic Film Analysis: Processing Faults, Handling Artifacts & Corrective Measures
7 Subject 2, Chapter 7: Technical Factors & Radiographic Quality
7.1 Density/Brightness, Contrast, Spatial Resolution & Distortion Controls 7.2 Exposure Math: Inverse Square Law, 15% Rule & Grid Conversion Factors 7.3 Technique Compensation: Age, Pathology, Cast and Orthopaedic Devices, Screen Speed & Beam Restriction
8 Subject 2, Chapter 8: Computed Radiography (CR)
8.1 Photostimulable Phosphor (PSP) Plates & CR Reader Mechanics 8.2 Image Processing, CR Artifacts & Erasure Protocols
9 Subject 2, Chapter 9: Digital Radiography (DR)
9.1 Flat-Panel Detectors: Direct vs. Indirect Conversion & TFT Arrays 9.2 Detective Quantum Efficiency (DQE), Modulation Transfer Function (MTF) & Dynamic Range
10 Subject 2, Chapter 10: Exposure Indicators & Image Evaluation
10.1 Exposure Indicators (S-Number, EI, DI), Windowing & Look-Up Tables (LUT) 10.2 Image Critique Checklist, Artifact Identification & Quality Control Standards 10.3 Image Display & Hard-Copy Output: Monitor Classification, DICOM GSDF, Dry vs Wet Laser Imaging
11 Subject 3, Chapter 11: Chest, Abdomen & Routine Positioning Concepts
11.1 Anatomical Terminology, Body Planes & Chest Radiography (PA, Lateral, Decubitus) 11.2 Abdominal Radiography: Acute Abdomen Series & Erect/Supine Protocols 11.3 Radiologic Surface Anatomy, Body Habitus & Sectional Body Cuts
12 Subject 3, Chapter 12: Upper & Lower Extremities & Girdles
12.1 Upper Limb & Shoulder Girdle Positioning (Hand, Wrist, Forearm, Elbow, Humerus, Shoulder) 12.2 Lower Limb & Pelvic Girdle Positioning (Foot, Ankle, Leg, Knee, Femur, Pelvis, Hip)
13 Subject 3, Chapter 13: Spine & Bony Thorax
13.1 Cervical, Thoracic & Lumbar Spine Radiography & Trauma Adaptations 13.2 Sacrum, Coccyx, Sacroiliac Joints & Bony Thorax (Ribs & Sternum)
14 Subject 3, Chapter 14: Cranium, Facial Bones & Paranasal Sinuses
14.1 Skull Positioning: Towne, Caldwell, Lateral & SMV Projections 14.2 Facial Bones, Orbits, Zygomatic Arches & Paranasal Sinuses
15 Subject 3, Chapter 15: Contrast Media Studies & Special Procedures
15.1 Gastrointestinal Contrast Procedures (Esophagram, UGI, Small Bowel, Barium Enema) 15.2 Genitourinary, Biliary & Special Fluoroscopic Studies (IVU, Cystography, ERCP, Myelography) 15.3 Reproductive System Studies: Hysterosalpingography, Pelvimetry & Male Reproductive Procedures 15.4 Nasopharyngography, Sialography & Fistulography / Sinus Tract Visualization
16 Subject 4, Chapter 16: Human Anatomy, Physiology & Pathology Integration
16.1 Body System Anatomy & Systemic Physiology Overview for Radiographers 16.2 Radiologic Pathology: Image Manifestations of Neoplastic, Inflammatory & Traumatic Conditions
17 Subject 4, Chapter 17: Patient Assessment, Communication & Informed Consent
17.1 Professional Communication, History Taking & Patient Rights 17.2 Informed Consent, Medical Documentation & Patient Transfer Safety
18 Subject 4, Chapter 18: Infection Control & Vital Signs Monitoring
18.1 Standard Precautions, Asepsis, Sterilization & Isolation Protocols 18.2 Measurement & Assessment of Vital Signs (BP, Pulse, Respiration, Temperature)
19 Subject 4, Chapter 19: Emergency Care & Aseptic Venipuncture
19.1 Basic Life Support (BLS), CPR Concepts & Emergency Response in Radiology 19.2 Aseptic Venipuncture Technique, IV Maintenance & Extravasation Care
20 Subject 4, Chapter 20: Professional Ethics, Jurisprudence & RA 7431
20.1 Republic Act No. 7431 (Radiologic Technology Act of 1992) & Board Rules 20.2 Code of Professional Ethics, Legal Liabilities, Malpractice & Negligence 20.3 Bioethical Principles in Practice, Professional Virtues & Interprofessional Relationships
21 Subject 5, Chapter 21: Diagnostic Ultrasonography
21.1 Ultrasound Physics, Transducer Construction & Doppler Principles 21.2 Acoustic Artifacts, Clinical Applications & Safety (TI/MI) 21.3 Clinical Ultrasound Examinations: Indications, Patient Preparation, Scanning Protocols & Transducer Selection
22 Subject 5, Chapter 22: Computed Tomography (CT)
22.1 CT Physics, Gantry Components, Detectors & Helical/Multislice Acquisition 22.2 Hounsfield Units, Windowing, CT Artifacts & Radiation Dose (CTDI/DLP)
23 Subject 5, Chapter 23: Magnetic Resonance Imaging (MRI)
23.1 MRI Physics, Nuclear Spin, T1/T2 Relaxation & Pulse Sequences 23.2 MRI Safety (Zones I-IV, SAR, Metallic Implants) & Common Artifacts 23.3 MRI Examination Protocols, Patient Preparation, Gadolinium Contrast & Sectional MRI Anatomy
24 Subject 5, Chapter 24: Interventional Radiology & Vascular Imaging
24.1 Vascular Access, Seldinger Technique & Digital Subtraction Angiography (DSA) 24.2 Interventional Procedures (Embolization, Angioplasty, Stenting) & C-Arm Radiation Safety 24.3 Interventional Patient Management: Contrast Selection, Pre-Procedure Workup & Post-Procedure Care
25 Subject 5, Chapter 25: Contrast Media Pharmacology & Adverse Reactions
25.1 Classification of Contrast Agents: Osmolality, Viscosity & Iodine Concentration 25.2 Adverse Contrast Reactions (Mild, Moderate, Severe) & Emergency Treatment Protocols 25.3 General Pharmacologic Principles: Pharmacokinetics, Pharmacodynamics, Drug Categories & the Rights of Drug Safety
26 Subject 5, Chapter 26: Nuclear Medicine & Molecular Imaging
26.1 Radioisotopes, Radiopharmaceuticals & Gamma Camera / SPECT Operation 26.2 Positron Emission Tomography (PET/CT) & Unsealed Radiation Source Safety
27 Subject 5, Chapter 27: Radiation Therapy & Radiation Oncology
27.1 Principles of Radiation Oncology, Linear Accelerators & Treatment Planning 27.2 Teletherapy vs. Brachytherapy, Patient Immobilization & Side Effect Management 27.3 Isodose Planning, Treatment Delivery Methods & Radiobiologic Principles in Radiation Therapy
28 Mammography & Dental Radiography
28.1 Mammography: Equipment, CC and MLO Positioning, Compression & Breast Pathology 28.2 Dental Radiography: Paralleling and Bisecting Techniques, Bitewing, Occlusal, Panoramic & Cephalometric
29 Medical Terminology for Radiologic Technology
29.1 Medical Word Building: Root Words, Combining Forms, Prefixes & Suffixes 29.2 Medical Terms in General Medicine, Abbreviations, Symbols & Critiquing Requests and Reports
30 Radiology Administration, Organization & Leadership
30.1 Organizational Structure, Staffing & Licensing Requirements of a Radiology Facility 30.2 Radiology Department Management: Job Descriptions, Duties, Leadership Styles & Entrepreneurial Skills
6.2 Sensitometric Curve (H&D Curve), Film Speed & Contrast Characteristics
Key Takeaways Explain This Topic AI
Sensitometry measures film response using optical density (OD = log10(I0/It)), where OD 1.0 represents 10% light transmission and OD 2.0 represents 1% transmission.
The H&D characteristic curve comprises Base plus Fog (Dmin 0.10-0.22), Toe, Straight-Line portion (useful diagnostic OD 0.25 to 2.50), Shoulder, and Dmax.
Film speed is calculated as the reciprocal of exposure required to produce an optical density of 1.0 + Base + Fog above Dmin.
Film contrast is measured by average gradient (slope of the straight-line portion); high contrast provides a short scale of gray but narrow exposure latitude.
Rare earth phosphor intensifying screens (gadolinium oxysulfide and lanthanum oxybromide) exhibit 15-20% conversion efficiency, dramatically reducing patient radiation exposure compared to calcium tungstate screens.
Last updated: August 2026
Sensitometric Curve (H&D Curve), Film Speed & Contrast Characteristics
Sensitometry is the quantitative measurement of the response of film emulsion to radiation and light exposure, as well as subsequent chemical processing. By plotting film response on a characteristic curve—first developed by Ferdinand Hurter and Charles Driffield in 1890—radiologic technologists can determine film contrast, speed, diagnostic exposure latitude, and image receptor performance under varied exposure conditions.
1. Sensitometry Tools & Optical Density Calculation
Accurate sensitometric evaluation requires two specialized laboratory instruments: a sensitometer and a densitometer.
Sensitometric Equipment
Sensitometer : An optical device containing a controlled light source and a calibrated 21-step optical step wedge. It exposes a film sheet to reproducible, incremental light intensities, where each step increases exposure by a factor of 2 \sqrt{2} 2 ( 1.414 1.414 1.414 ) or 2 1 / 2 2^{1/2} 2 1/2 (log relative exposure increment of 0.15 0.15 0.15 per step).
Densitometer : An electronic instrument used to measure the optical density of processed film. It directs a calibrated light beam of known intensity ( I 0 I_0 I 0 ) through a specific spot on the film and measures the transmitted light intensity ( I t I_t I t ) using a photocell detector.
Optical Density (OD) Formula
Optical density measures the logarithmic ratio of light incident upon the film to light transmitted through the film: O D = log 10 ( I 0 I t ) OD = \log_{10}\left(\frac{I_0}{I_t}\right) O D = lo g 10 ( I t I 0 )
Where:
I 0 I_0 I 0 = Incident light intensity emitted by the illuminator
I t I_t I t = Transmitted light intensity passing through the film +----------------+--------------------------+---------------------+
- | Optical Density| Fraction Transmitted | Percentage Light |
- | (OD) | (It / I0) | Transmission |
- +----------------+--------------------------+---------------------+
- | 0.0 | 1 / 1 = 1.0 | 100% |
- | 0.3 | ~1 / 2 = 0.5 | 50% |
- | 1.0 | 1 / 10 = 0.1 | 10% |
- | 2.0 | 1 / 100 = 0.01 | 1% |
- | 3.0 | 1 / 1,000 = 0.001 | 0.1% |
- | 4.0 | 1 / 10,000 = 0.0001 | 0.01% |
- +----------------+--------------------------+---------------------+
A change in optical density of 0.3 represents a 2-fold change (doubling or halving) in light transmission. For example, an OD of 1.0 transmits 10% of light, whereas an OD of 1.3 transmits 5% of light. In diagnostic radiography, useful optical density ranges from 0.25 to 2.50 (with most diagnostic features falling between 0.50 and 2.00 ).
2. Characteristic Curve (H&D Curve) Regions
The Characteristic Curve (also known as the H&D Curve or D log E \text{D }\log \text{E} D lo g E curve ) plots Optical Density ( O D OD O D ) on the vertical y-axis against Log Relative Exposure ( log E \log \text{E} lo g E ) on the horizontal x-axis. Optical Density (OD)
- 4.0 ┤ /── Dmax (Solarization)
- │ /
- 3.0 ┤ / <-- Shoulder Region
- │ /
- 2.0 ┤ /
- │ / <-- Straight-Line Portion
1.0 ┤ / (Diagnostic Useful Range:
- │ / OD 0.25 to 2.50)
- 0.25┤ __/ <-- Toe Region
- 0.15┤__________________________/ <-- Base plus Fog (Dmin ~0.10-0.22)
- └──────────────────────────────────────────────────────── Log Relative Exposure
- Regions of the H&D Curve
Base plus Fog ( D m i n D_{min} D min ) : The optical density of unexposed, processed film. It typically measures 0.10 to 0.22 OD .
Base Density : Tint added to polyester base (~0.05 to 0.10 OD).
Fog Density : Unintended silver halide reduction caused by thermal energy, background radiation, or chemical developer degradation (~0.05 to 0.12 OD). Total D m i n D_{min} D min should never exceed 0.22 OD in quality assurance testing.
Toe Region : The lower curved portion where optical density begins to rise slowly above D m i n D_{min} D min ( O D ≈ 0.12 to 0.25 OD \approx 0.12 \text{ to } 0.25 O D ≈ 0.12 to 0.25 ). Represents initial response to light/radiation where small numbers of silver halide crystals are exposed.
Straight-Line Portion : The linear, steep section where optical density is directly proportional to log relative exposure. This region represents the useful diagnostic density range (OD 0.25 to 2.50) . All diagnostic clinical radiograms must fall within this exposure latitude to demonstrate proper tissue contrast.
Shoulder Region : The upper curved section where the curve flattens out ( O D > 2.50 OD > 2.50 O D > 2.50 ). Increased exposure produces minimal additional density because the vast majority of silver halide crystals have already been exposed and converted to metallic silver.
Maximum Density ( D m a x D_{max} D ma x ) : The absolute maximum optical density achievable by the film emulsion, usually ranging between 2.5 and 4.0 OD .
Solarization (Reversal Region) : Extreme overexposure beyond D m a x D_{max} D ma x causes a drop in optical density. Heavy exposure disrupts latent image centers by releasing excess trapped electrons, resulting in lighter density (used historically in duplicate film manufacturing).
3. Film Speed & Sensitivity
Film speed measures the sensitivity of the film emulsion to radiation exposure. A fast film requires less radiation exposure to produce a given optical density than a slow film.
Speed Point & Calculation
Film speed is evaluated at the speed point , defined as the log exposure value required to produce an optical density of 1.0 + Base + Fog 1.0 + \text{Base + Fog} 1.0 + Base + Fog above D m i n D_{min} D min . Film Speed = 1 Exposure (in Roentgens or Grays) required to reach OD 1.0 + D m i n \text{Film Speed} = \frac{1}{\text{Exposure (in Roentgens or Grays) required to reach OD } 1.0 + D_{min}} Film Speed = Exposure (in Roentgens or Grays) required to reach OD 1.0 + D min 1
If Film A requires 0.005 R 0.005\text{ R} 0.005 R to reach the speed point and Film B requires 0.01 R 0.01\text{ R} 0.01 R , Film A is twice as fast as Film B ( 1 / 0.005 = 200 1/0.005 = 200 1/0.005 = 200 vs. 1 / 0.01 = 100 1/0.01 = 100 1/0.01 = 100 ).
Factors Influencing Film Speed
Silver Halide Crystal Size : Larger crystals absorb more photons per crystal, increasing film speed (at the cost of spatial resolution).
Emulsion Thickness : Double-emulsion film doubles the speed compared to single-emulsion film.
Tabular (T-Grain) Technology : Flat, table-like silver halide grains provide a larger surface area relative to volume, increasing speed and light absorption efficiency without increasing grain coarseness.
- 4. Film Contrast & Exposure Latitude
- Film Contrast & Average Gradient
Film contrast is inherent to the emulsion design and is represented by the slope of the straight-line portion of the H&D curve. It is quantitatively expressed as the Average Gradient : Average Gradient = D 2 − D 1 log E 2 − log E 1 \text{Average Gradient} = \frac{D_2 - D_1}{\log E_2 - \log E_1} Average Gradient = lo g E 2 − lo g E 1 D 2 − D 1
Where:
D 1 = 0.25 + D m i n D_1 = 0.25 + D_{min} D 1 = 0.25 + D min
D 2 = 2.00 + D m i n D_2 = 2.00 + D_{min} D 2 = 2.00 + D min
High-Contrast Film (Steep Slope, Average Gradient > 2.0) : Produces high radiographic contrast (short scale of gray, stark black-and-white distinctions). Useful for chest and skeletal radiography.
Low-Contrast Film (Gradual Slope, Average Gradient < 1.5) : Produces long scale contrast with many shades of gray. Useful for mammography and soft tissue evaluation.
Film Latitude
Film latitude is the range of exposures over which the film produces optical densities within the useful diagnostic range ( 0.25 to 2.50 0.25 \text{ to } 2.50 0.25 to 2.50 ).
Inverse Relationship : Contrast and latitude are inversely proportional. High-contrast film has narrow exposure latitude (little room for exposure error), whereas low-contrast film has wide exposure latitude (forgiving of slight mAs/kVp errors).
5. Intensifying Screens & Rare Earth Phosphors
Intensifying screens amplify the imaging capability of X-rays by converting X-ray photon energy into visible light photons, which expose the film emulsion. Approximately 95% to 99% of the photographic density on a film-screen radiograph is created by screen-emitted light, and only 1% to 5% by direct X-ray photon absorption.
Screen Construction
Base : Rigid polyester support (1-2 mm thick).
Reflective Layer : A layer of titanium dioxide ( TiO 2 \text{TiO}_2 TiO 2 ) that reflects forward-scattered light back toward the film, increasing screen speed (though slightly decreasing spatial resolution).
Phosphor Layer : Active layer containing luminescent phosphor crystals.
Protective Coat : Transparent polymer layer protecting phosphor crystals from physical wear and cleaning solvents.
Luminescence Mechanisms
Luminescence is the emission of light in response to external stimulation.
Fluorescence : Immediate light emission occurring within 10 − 8 10^{-8} 1 0 − 8 seconds of photon absorption. This is the desired mechanism in radiographic intensifying screens.
Phosphorescence (Afterglow) : Delayed light emission continuing beyond 10 − 8 10^{-8} 1 0 − 8 seconds . This causes unwanted film fogging and image ghosting.
Phosphor Materials: Calcium Tungstate vs. Rare Earth
Calcium Tungstate ( CaWO 4 \text{CaWO}_4 CaWO 4 ) : The historical standard phosphor discovered by Thomas Edison in 1896. Emits blue light with a low conversion efficiency of ~5% .
Rare Earth Phosphors : Modern phosphors developed in the 1970s, incorporating rare earth elements:
Gadolinium Oxysulfide ( Gd 2 O 2 S:Eu \text{Gd}_2\text{O}_2\text{S:Eu} Gd 2 O 2 S:Eu ) : Emits green light (requires green-sensitive orthochromatic film).
Lanthanum Oxybromide ( LaOBr:Tm \text{LaOBr:Tm} LaOBr:Tm ) : Emits blue light.
Conversion Efficiency : Rare earth phosphors exhibit a high conversion efficiency of 15% to 20% (3 to 4 times higher than calcium tungstate), dramatically reducing patient radiation dose.
Screen Speed & Intensification Factor (IF) Intensification Factor (IF) = Exposure required without screens Exposure required with screens \text{Intensification Factor (IF)} = \frac{\text{Exposure required without screens}}{\text{Exposure required with screens}} Intensification Factor (IF) = Exposure required with screens Exposure required without screens
While higher screen speed reduces patient exposure, extremely high-speed screens suffer from quantum mottle (statistical noise caused by too few X-ray photons creating the image), reducing image detail.
H&D Curve Parameters Summary Table
Parameter / Region Optical Density (OD) Range Physical / Clinical Significance
Base plus Fog ( D m i n D_{min} D min ) 0.10 to 0.22 0.10 \text{ to } 0.22 0.10 to 0.22 Density of unexposed film (blue tint base + chemical fog); limit < 0.22 <0.22 < 0.22
Toe Region 0.12 to 0.25 0.12 \text{ to } 0.25 0.12 to 0.25 Initial light response; sub-threshold exposure area
Straight-Line Portion 0.25 to 2.50 0.25 \text{ to } 2.50 0.25 to 2.50 Useful diagnostic density range; linear response to log exposure
Shoulder Region > 2.50 > 2.50 > 2.50 High-exposure saturation area where curve flattens
Maximum Density ( D m a x D_{max} D ma x ) 2.5 to 4.0 2.5 \text{ to } 4.0 2.5 to 4.0 Peak optical density capacity of film emulsion
Speed Point 1.0 + D m i n 1.0 + D_{min} 1.0 + D min Exposure point used to calculate quantitative film sensitivity
Average Gradient Slope ( Δ OD / Δ log E \Delta \text{OD} / \Delta \log \text{E} Δ OD /Δ lo g E ) Quantitative measure of film contrast (steep slope = high contrast)