Study guide
5.1 PACS Architecture, DICOM Standards & HL7 Integration
Philippine Radiologic Technologists Licensure Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Subject 1, Chapter 1: Physics of Radiology & X-Ray Production
1.1 Atomic Structure, Electromagnetic Spectrum & X-Ray Production Mechanisms 1.2 X-Ray Tube Components, Target Interactions & Emission Spectrum 1.3 Photon Interactions with Matter: Photoelectric, Compton, Coherent & Pair Production
2 Subject 1, Chapter 2: Radiographic Equipment & Circuitry
2.1 High-Voltage Generators, Transformers & Rectification Circuits 2.2 Automatic Exposure Control (AEC), Beam Restriction & Quality Control 2.3 Tube Rating Charts, Extending Tube Life, Mechanical Malfunction & Preventive Maintenance
3 Subject 1, Chapter 3: Radiobiology & Cellular Response
3.1 Radiation Interaction with Tissue, Direct/Indirect Action & LET/RBE 3.2 Law of Bergonie & Tribondeau, Deterministic vs. Stochastic Effects 3.3 Dose-Response Relationships, Embryo and Fetal Effects & Acute Radiation Syndrome
4 Subject 1, Chapter 4: Radiation Protection & Dose Limits
4.1 ALARA Principles, Structural Shielding & Dose Limits 4.2 Personnel Dosimetry & Patient Dose Reduction Techniques 4.3 Dose Calculation Problems: Time, Distance, Shielding & Structural Barrier Design
5 Subject 1, Chapter 5: Imaging Informatics & Quality Assurance
5.1 PACS Architecture, DICOM Standards & HL7 Integration 5.2 Quality Assurance & Quality Control Protocols in Diagnostic Radiography 5.3 Radiology Workflow, RIS/HIS Integration, Teleradiology & Informatics Quality Assurance
6 Subject 2, Chapter 6: Film-Screen Radiography & Sensitometry
6.1 Film Emulsion, Latent Image Formation & Darkroom Chemistry 6.2 Sensitometric Curve (H&D Curve), Film Speed & Contrast Characteristics 6.3 Radiographic Film Analysis: Processing Faults, Handling Artifacts & Corrective Measures
7 Subject 2, Chapter 7: Technical Factors & Radiographic Quality
7.1 Density/Brightness, Contrast, Spatial Resolution & Distortion Controls 7.2 Exposure Math: Inverse Square Law, 15% Rule & Grid Conversion Factors 7.3 Technique Compensation: Age, Pathology, Cast and Orthopaedic Devices, Screen Speed & Beam Restriction
8 Subject 2, Chapter 8: Computed Radiography (CR)
8.1 Photostimulable Phosphor (PSP) Plates & CR Reader Mechanics 8.2 Image Processing, CR Artifacts & Erasure Protocols
9 Subject 2, Chapter 9: Digital Radiography (DR)
9.1 Flat-Panel Detectors: Direct vs. Indirect Conversion & TFT Arrays 9.2 Detective Quantum Efficiency (DQE), Modulation Transfer Function (MTF) & Dynamic Range
10 Subject 2, Chapter 10: Exposure Indicators & Image Evaluation
10.1 Exposure Indicators (S-Number, EI, DI), Windowing & Look-Up Tables (LUT) 10.2 Image Critique Checklist, Artifact Identification & Quality Control Standards 10.3 Image Display & Hard-Copy Output: Monitor Classification, DICOM GSDF, Dry vs Wet Laser Imaging
11 Subject 3, Chapter 11: Chest, Abdomen & Routine Positioning Concepts
11.1 Anatomical Terminology, Body Planes & Chest Radiography (PA, Lateral, Decubitus) 11.2 Abdominal Radiography: Acute Abdomen Series & Erect/Supine Protocols 11.3 Radiologic Surface Anatomy, Body Habitus & Sectional Body Cuts
12 Subject 3, Chapter 12: Upper & Lower Extremities & Girdles
12.1 Upper Limb & Shoulder Girdle Positioning (Hand, Wrist, Forearm, Elbow, Humerus, Shoulder) 12.2 Lower Limb & Pelvic Girdle Positioning (Foot, Ankle, Leg, Knee, Femur, Pelvis, Hip)
13 Subject 3, Chapter 13: Spine & Bony Thorax
13.1 Cervical, Thoracic & Lumbar Spine Radiography & Trauma Adaptations 13.2 Sacrum, Coccyx, Sacroiliac Joints & Bony Thorax (Ribs & Sternum)
14 Subject 3, Chapter 14: Cranium, Facial Bones & Paranasal Sinuses
14.1 Skull Positioning: Towne, Caldwell, Lateral & SMV Projections 14.2 Facial Bones, Orbits, Zygomatic Arches & Paranasal Sinuses
15 Subject 3, Chapter 15: Contrast Media Studies & Special Procedures
15.1 Gastrointestinal Contrast Procedures (Esophagram, UGI, Small Bowel, Barium Enema) 15.2 Genitourinary, Biliary & Special Fluoroscopic Studies (IVU, Cystography, ERCP, Myelography) 15.3 Reproductive System Studies: Hysterosalpingography, Pelvimetry & Male Reproductive Procedures 15.4 Nasopharyngography, Sialography & Fistulography / Sinus Tract Visualization
16 Subject 4, Chapter 16: Human Anatomy, Physiology & Pathology Integration
16.1 Body System Anatomy & Systemic Physiology Overview for Radiographers 16.2 Radiologic Pathology: Image Manifestations of Neoplastic, Inflammatory & Traumatic Conditions
17 Subject 4, Chapter 17: Patient Assessment, Communication & Informed Consent
17.1 Professional Communication, History Taking & Patient Rights 17.2 Informed Consent, Medical Documentation & Patient Transfer Safety
18 Subject 4, Chapter 18: Infection Control & Vital Signs Monitoring
18.1 Standard Precautions, Asepsis, Sterilization & Isolation Protocols 18.2 Measurement & Assessment of Vital Signs (BP, Pulse, Respiration, Temperature)
19 Subject 4, Chapter 19: Emergency Care & Aseptic Venipuncture
19.1 Basic Life Support (BLS), CPR Concepts & Emergency Response in Radiology 19.2 Aseptic Venipuncture Technique, IV Maintenance & Extravasation Care
20 Subject 4, Chapter 20: Professional Ethics, Jurisprudence & RA 7431
20.1 Republic Act No. 7431 (Radiologic Technology Act of 1992) & Board Rules 20.2 Code of Professional Ethics, Legal Liabilities, Malpractice & Negligence 20.3 Bioethical Principles in Practice, Professional Virtues & Interprofessional Relationships
21 Subject 5, Chapter 21: Diagnostic Ultrasonography
21.1 Ultrasound Physics, Transducer Construction & Doppler Principles 21.2 Acoustic Artifacts, Clinical Applications & Safety (TI/MI) 21.3 Clinical Ultrasound Examinations: Indications, Patient Preparation, Scanning Protocols & Transducer Selection
22 Subject 5, Chapter 22: Computed Tomography (CT)
22.1 CT Physics, Gantry Components, Detectors & Helical/Multislice Acquisition 22.2 Hounsfield Units, Windowing, CT Artifacts & Radiation Dose (CTDI/DLP)
23 Subject 5, Chapter 23: Magnetic Resonance Imaging (MRI)
23.1 MRI Physics, Nuclear Spin, T1/T2 Relaxation & Pulse Sequences 23.2 MRI Safety (Zones I-IV, SAR, Metallic Implants) & Common Artifacts 23.3 MRI Examination Protocols, Patient Preparation, Gadolinium Contrast & Sectional MRI Anatomy
24 Subject 5, Chapter 24: Interventional Radiology & Vascular Imaging
24.1 Vascular Access, Seldinger Technique & Digital Subtraction Angiography (DSA) 24.2 Interventional Procedures (Embolization, Angioplasty, Stenting) & C-Arm Radiation Safety 24.3 Interventional Patient Management: Contrast Selection, Pre-Procedure Workup & Post-Procedure Care
25 Subject 5, Chapter 25: Contrast Media Pharmacology & Adverse Reactions
25.1 Classification of Contrast Agents: Osmolality, Viscosity & Iodine Concentration 25.2 Adverse Contrast Reactions (Mild, Moderate, Severe) & Emergency Treatment Protocols 25.3 General Pharmacologic Principles: Pharmacokinetics, Pharmacodynamics, Drug Categories & the Rights of Drug Safety
26 Subject 5, Chapter 26: Nuclear Medicine & Molecular Imaging
26.1 Radioisotopes, Radiopharmaceuticals & Gamma Camera / SPECT Operation 26.2 Positron Emission Tomography (PET/CT) & Unsealed Radiation Source Safety
27 Subject 5, Chapter 27: Radiation Therapy & Radiation Oncology
27.1 Principles of Radiation Oncology, Linear Accelerators & Treatment Planning 27.2 Teletherapy vs. Brachytherapy, Patient Immobilization & Side Effect Management 27.3 Isodose Planning, Treatment Delivery Methods & Radiobiologic Principles in Radiation Therapy
28 Mammography & Dental Radiography
28.1 Mammography: Equipment, CC and MLO Positioning, Compression & Breast Pathology 28.2 Dental Radiography: Paralleling and Bisecting Techniques, Bitewing, Occlusal, Panoramic & Cephalometric
29 Medical Terminology for Radiologic Technology
29.1 Medical Word Building: Root Words, Combining Forms, Prefixes & Suffixes 29.2 Medical Terms in General Medicine, Abbreviations, Symbols & Critiquing Requests and Reports
30 Radiology Administration, Organization & Leadership
30.1 Organizational Structure, Staffing & Licensing Requirements of a Radiology Facility 30.2 Radiology Department Management: Job Descriptions, Duties, Leadership Styles & Entrepreneurial Skills
5.1 PACS Architecture, DICOM Standards & HL7 Integration
Key Takeaways Explain This Topic AI
PACS integrates acquisition modalities, server archives, display workstations, and networks to enable digital image management and distribution.
DICOM is the universal standard format for medical images, encoding patient metadata within the DICOM header and utilizing Service-Object Pair (SOP) classes for system interoperability.
HL7 standards govern textual data exchange, using specific message types such as ADT (demographics), ORM (orders), and ORU (diagnostic reports) to integrate HIS and RIS with PACS.
Tiered storage architectures combine high-speed RAID short-term archives for instant access with cost-effective SAN, NAS, or cloud systems for long-term data retention.
Primary diagnostic interpretation mandates lossless data compression (2:1 to 3:1 ratio) to ensure bit-for-bit accuracy without sacrificing spatial or contrast resolution.
Last updated: August 2026
5.1 PACS Architecture, DICOM Standards & HL7 Integration
Modern diagnostic radiography relies on an interconnected ecosystem of digital systems, standards, and networks. Understanding how medical images and clinical data move seamlessly from acquisition modalities to archival storage and diagnostic workstations is a core competency for radiologic technologists.
1. PACS Architecture & Core Components
A Picture Archiving and Communication System (PACS) is an integrated network of computers, storage devices, and software dedicated to the acquisition, transmission, display, and storage of digital medical images.
The Four Fundamental Components of PACS
Acquisition Modalities
Digital radiography (DR), computed radiography (CR), computed tomography (CT), magnetic resonance imaging (MRI), mammography, and ultrasound (US) systems capture anatomical data. These modalities convert physical attenuation values or signals into digital matrix values and format them according to standardized communication protocols.
PACS Server and Central Archive
The server acts as the operational brain and database hub of the PACS. It manages image routing, database indexing, worklist synchronization, and storage allocation. The archive engine manages image lifecycle policies, moving datasets between high-speed short-term storage and economical long-term backup arrays.
Display Workstations
Workstations vary significantly based on clinical utility:
Diagnostic Workstations (Radiologist): Equipped with ultra-high-resolution, calibrated monitors (3 to 5 megapixels for general radiography; up to 10 megapixels for digital mammography). They offer advanced post-processing capabilities, high luminance output, and precise DICOM Grayscale Standard Display Function (GSDF) calibration.
Technologist Quality Control (QC) Workstations: Positioned adjacent to acquisition equipment (typically 2 to 3 megapixel display monitors), allowing immediate evaluation of image positioning, exposure indicators, and technical quality prior to transmitting images to the PACS server.
Clinical Review Workstations: Deployed throughout inpatient wards, emergency rooms, and outpatient clinics (1 to 2 megapixel monitors) for non-diagnostic image review by attending physicians and surgeons.
Network Infrastructure
The digital highway connecting all PACS endpoints. PACS relies on local area networks (LANs) using high-speed Fast Ethernet (100 Mbps) or Gigabit Ethernet (1 Gbps to 10 Gbps) switches. Wide area networks (WANs) connect off-site imaging centers and teleradiology providers via secure Virtual Private Networks (VPNs).
2. Standards: DICOM & IHE
Interoperability across multi-vendor equipment requires rigid universal standards.
Digital Imaging and Communications in Medicine (DICOM)
Developed jointly by the American College of Radiology (ACR) and the National Electrical Manufacturers Association (NEMA), DICOM is the international standard for medical image transmission, display, and storage.
The DICOM Header
Every DICOM file consists of two distinct components: the DICOM Header and the Pixel Data Matrix .
The header embeds thousands of standardized text data tags (represented by hexadecimal tag pairs such as (0010,0010) for Patient Name).
Metadata includes patient demographics, study instance unique identifiers (UIDs), institution name, modality parameters (kVp, mAs, exposure index, slice thickness, grid ratios), and image matrix dimensions.
Crucial Rule: The DICOM header permanently binds clinical context to pixel values, preventing misidentification or lost patient history.
DICOM Service-Object Pair (SOP) Classes
DICOM functionality is defined through Service-Object Pair (SOP) Classes . An SOP Class is the functional pairing of a DICOM Service Class (the action performed) with a DICOM Information Object Definition (IOD) (the data object acted upon).
DICOM Storage SOP Class: Combines the C-STORE service with an image IOD (e.g., CR Image IOD), permitting an acquisition device to transfer images to the PACS archive.
DICOM Modality Worklist (MWL) SOP Class: Allows acquisition modalities to query the RIS for patient demographic data and scheduled procedure details directly, eliminating manual data entry errors at the control console.
DICOM Query/Retrieve SOP Class (C-FIND / C-MOVE): Enables workstations to search the central PACS database and request image transfer.
DICOM Print SOP Class: Manages print commands to hardcopy laser imagers.
Integrating the Healthcare Enterprise (IHE)
While DICOM defines image communication and HL7 defines textual data transfer, Integrating the Healthcare Enterprise (IHE) is an industry-wide initiative that coordinates how DICOM and HL7 work together in real-world clinical scenarios.
IHE creates Integration Profiles (e.g., Scheduled Workflow - SWF, Patient Information Reconciliation - PIR) that specify exact technical blueprints for vendor software, ensuring seamless workflow interoperability across HIS, RIS, and PACS.
3. HL7 Standards & Clinical Messages
Health Level Seven (HL7) is an international standard for the exchange, integration, sharing, and retrieval of electronic health information.
Key HL7 Message Types in Radiology
HL7 messages use structured segments (such as MSH - Message Header, PID - Patient Identification, OBR - Observation Request, and OBX - Observation Result) separated by delimiters ( | , ^ ) to transmit clinical workflow data:
HL7 ADT (Admission, Discharge, Transfer): Sent by the HIS when a patient checks in, updates demographic details, or is assigned a bed. Updates demographic records across the hospital enterprise.
HL7 ORM (Order Management): Generated by the RIS or HIS when a physician orders an imaging procedure. Triggers the creation of a DICOM Modality Worklist item.
HL7 ORU (Unsolicited Observation Result): Transmitted when a radiologist completes and dictates a formal diagnostic report. The report text (OBX segment) is pushed back from the RIS/PACS to the HIS and Electronic Medical Record (EMR).
4. Information Systems: RIS vs. HIS Integration
Effective departmental management requires synchronization between enterprise-wide and department-specific information systems.
Hospital Information System (HIS): The core enterprise software managing administrative, financial, billing, inpatient bed tracking, and electronic health record (EHR) functions across the entire healthcare system.
Radiology Information System (RIS): The specialized database dedicated to radiology departmental operations. Functions include patient scheduling, exam registration, radiologist worklist management, procedure tracking, diagnostic reporting, and billing code entry (CPT/ICD codes).
Information Systems and Standards Role Comparison
System / Standard Full Name Primary Domain Core Functions / Roles
DICOM Digital Imaging and Communications in Medicine Image Data & Modality Exchange Formats medical image files, binds headers to pixels, manages C-STORE, C-FIND, C-MOVE, MWL.
HL7 Health Level Seven International Textual & Administrative Data Formats text messages for patient registration (ADT), exam ordering (ORM), and diagnostic reporting (ORU).
RIS Radiology Information System Departmental Radiology Management Manages patient scheduling, technologist worklists, procedure tracking, dictation management, and radiology billing.
HIS Hospital Information System Enterprise Healthcare Operations Manages broad patient EMR records, hospital admissions, room assignments, enterprise billing, and clinical orders.
5. Storage Architecture & Redundancy
Medical imaging generates terabytes of data daily. Storage systems must balance instant access speed with long-term data protection.
Tiered Storage Architecture
Short-Term Storage (Online):
Provides sub-second retrieval times for active studies and recent prior exams (typically 30 to 60 days). Utilizes high-speed solid-state drives (SSDs) or direct-attached RAID (Redundant Array of Independent Disks) arrays.
Long-Term Storage (Nearline / Offline Archive):
Houses historical studies required for legal retention (typically 5 to 7 years for adults; until age of majority plus 7 years for pediatric patients). Uses high-capacity Storage Area Networks (SAN) , Network-Attached Storage (NAS) , optical disc jukeboxes, linear tape-open (LTO) tape libraries, or secure cloud storage.
Common RAID Configurations
RAID 0 (Striping): Data split across multiple disks. High speed, but offers zero redundancy (failure of one disk destroys all data). Unsuitable for PACS.
RAID 1 (Mirroring): Identical data duplicated on two disks. Excellent redundancy, but carries a 50% storage overhead cost.
RAID 5 (Block-Level Striping with Parity): Data and parity information distributed across three or more disks. Offers a balance of high performance, storage efficiency, and recovery from a single drive failure.
RAID 10 (RAID 1+0 - Stripe of Mirrors): Combines mirroring and striping across four or more drives. Delivers maximum speed and fault tolerance at higher equipment cost.
6. Data Compression Principles
To optimize network transmission speeds and storage footprint, image data may undergo digital compression.
Lossless Compression (Reversible):
Uses mathematical algorithms (such as Huffman coding or Run-Length Encoding) that condense file size by ratios of 2:1 to 3:1 (50% to 66% size reduction). Upon decompression, the image is mathematically identical, bit-for-bit, to the original raw file. Lossless compression is legally mandated for primary diagnostic radiologist interpretation.
Lossy Compression (Irreversible):
Uses algorithms (such as JPEG 2000 lossy) that achieve high compression ratios from 10:1 up to 50:1 by permanently discarding higher-frequency spatial data and pixel noise that the algorithm deems imperceptible. While suitable for rapid web-based viewing, clinical reference, or remote consultation, lossy compression is strictly restricted or prohibited for initial primary diagnostic interpretation due to the risk of masking subtle microcalcifications or fine fracture lines.