Study guide
18.1 Standard Precautions, Asepsis, Sterilization & Isolation Protocols
Philippine Radiologic Technologists Licensure Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Subject 1, Chapter 1: Physics of Radiology & X-Ray Production
1.1 Atomic Structure, Electromagnetic Spectrum & X-Ray Production Mechanisms 1.2 X-Ray Tube Components, Target Interactions & Emission Spectrum 1.3 Photon Interactions with Matter: Photoelectric, Compton, Coherent & Pair Production
2 Subject 1, Chapter 2: Radiographic Equipment & Circuitry
2.1 High-Voltage Generators, Transformers & Rectification Circuits 2.2 Automatic Exposure Control (AEC), Beam Restriction & Quality Control 2.3 Tube Rating Charts, Extending Tube Life, Mechanical Malfunction & Preventive Maintenance
3 Subject 1, Chapter 3: Radiobiology & Cellular Response
3.1 Radiation Interaction with Tissue, Direct/Indirect Action & LET/RBE 3.2 Law of Bergonie & Tribondeau, Deterministic vs. Stochastic Effects 3.3 Dose-Response Relationships, Embryo and Fetal Effects & Acute Radiation Syndrome
4 Subject 1, Chapter 4: Radiation Protection & Dose Limits
4.1 ALARA Principles, Structural Shielding & Dose Limits 4.2 Personnel Dosimetry & Patient Dose Reduction Techniques 4.3 Dose Calculation Problems: Time, Distance, Shielding & Structural Barrier Design
5 Subject 1, Chapter 5: Imaging Informatics & Quality Assurance
5.1 PACS Architecture, DICOM Standards & HL7 Integration 5.2 Quality Assurance & Quality Control Protocols in Diagnostic Radiography 5.3 Radiology Workflow, RIS/HIS Integration, Teleradiology & Informatics Quality Assurance
6 Subject 2, Chapter 6: Film-Screen Radiography & Sensitometry
6.1 Film Emulsion, Latent Image Formation & Darkroom Chemistry 6.2 Sensitometric Curve (H&D Curve), Film Speed & Contrast Characteristics 6.3 Radiographic Film Analysis: Processing Faults, Handling Artifacts & Corrective Measures
7 Subject 2, Chapter 7: Technical Factors & Radiographic Quality
7.1 Density/Brightness, Contrast, Spatial Resolution & Distortion Controls 7.2 Exposure Math: Inverse Square Law, 15% Rule & Grid Conversion Factors 7.3 Technique Compensation: Age, Pathology, Cast and Orthopaedic Devices, Screen Speed & Beam Restriction
8 Subject 2, Chapter 8: Computed Radiography (CR)
8.1 Photostimulable Phosphor (PSP) Plates & CR Reader Mechanics 8.2 Image Processing, CR Artifacts & Erasure Protocols
9 Subject 2, Chapter 9: Digital Radiography (DR)
9.1 Flat-Panel Detectors: Direct vs. Indirect Conversion & TFT Arrays 9.2 Detective Quantum Efficiency (DQE), Modulation Transfer Function (MTF) & Dynamic Range
10 Subject 2, Chapter 10: Exposure Indicators & Image Evaluation
10.1 Exposure Indicators (S-Number, EI, DI), Windowing & Look-Up Tables (LUT) 10.2 Image Critique Checklist, Artifact Identification & Quality Control Standards 10.3 Image Display & Hard-Copy Output: Monitor Classification, DICOM GSDF, Dry vs Wet Laser Imaging
11 Subject 3, Chapter 11: Chest, Abdomen & Routine Positioning Concepts
11.1 Anatomical Terminology, Body Planes & Chest Radiography (PA, Lateral, Decubitus) 11.2 Abdominal Radiography: Acute Abdomen Series & Erect/Supine Protocols 11.3 Radiologic Surface Anatomy, Body Habitus & Sectional Body Cuts
12 Subject 3, Chapter 12: Upper & Lower Extremities & Girdles
12.1 Upper Limb & Shoulder Girdle Positioning (Hand, Wrist, Forearm, Elbow, Humerus, Shoulder) 12.2 Lower Limb & Pelvic Girdle Positioning (Foot, Ankle, Leg, Knee, Femur, Pelvis, Hip)
13 Subject 3, Chapter 13: Spine & Bony Thorax
13.1 Cervical, Thoracic & Lumbar Spine Radiography & Trauma Adaptations 13.2 Sacrum, Coccyx, Sacroiliac Joints & Bony Thorax (Ribs & Sternum)
14 Subject 3, Chapter 14: Cranium, Facial Bones & Paranasal Sinuses
14.1 Skull Positioning: Towne, Caldwell, Lateral & SMV Projections 14.2 Facial Bones, Orbits, Zygomatic Arches & Paranasal Sinuses
15 Subject 3, Chapter 15: Contrast Media Studies & Special Procedures
15.1 Gastrointestinal Contrast Procedures (Esophagram, UGI, Small Bowel, Barium Enema) 15.2 Genitourinary, Biliary & Special Fluoroscopic Studies (IVU, Cystography, ERCP, Myelography) 15.3 Reproductive System Studies: Hysterosalpingography, Pelvimetry & Male Reproductive Procedures 15.4 Nasopharyngography, Sialography & Fistulography / Sinus Tract Visualization
16 Subject 4, Chapter 16: Human Anatomy, Physiology & Pathology Integration
16.1 Body System Anatomy & Systemic Physiology Overview for Radiographers 16.2 Radiologic Pathology: Image Manifestations of Neoplastic, Inflammatory & Traumatic Conditions
17 Subject 4, Chapter 17: Patient Assessment, Communication & Informed Consent
17.1 Professional Communication, History Taking & Patient Rights 17.2 Informed Consent, Medical Documentation & Patient Transfer Safety
18 Subject 4, Chapter 18: Infection Control & Vital Signs Monitoring
18.1 Standard Precautions, Asepsis, Sterilization & Isolation Protocols 18.2 Measurement & Assessment of Vital Signs (BP, Pulse, Respiration, Temperature)
19 Subject 4, Chapter 19: Emergency Care & Aseptic Venipuncture
19.1 Basic Life Support (BLS), CPR Concepts & Emergency Response in Radiology 19.2 Aseptic Venipuncture Technique, IV Maintenance & Extravasation Care
20 Subject 4, Chapter 20: Professional Ethics, Jurisprudence & RA 7431
20.1 Republic Act No. 7431 (Radiologic Technology Act of 1992) & Board Rules 20.2 Code of Professional Ethics, Legal Liabilities, Malpractice & Negligence 20.3 Bioethical Principles in Practice, Professional Virtues & Interprofessional Relationships
21 Subject 5, Chapter 21: Diagnostic Ultrasonography
21.1 Ultrasound Physics, Transducer Construction & Doppler Principles 21.2 Acoustic Artifacts, Clinical Applications & Safety (TI/MI) 21.3 Clinical Ultrasound Examinations: Indications, Patient Preparation, Scanning Protocols & Transducer Selection
22 Subject 5, Chapter 22: Computed Tomography (CT)
22.1 CT Physics, Gantry Components, Detectors & Helical/Multislice Acquisition 22.2 Hounsfield Units, Windowing, CT Artifacts & Radiation Dose (CTDI/DLP)
23 Subject 5, Chapter 23: Magnetic Resonance Imaging (MRI)
23.1 MRI Physics, Nuclear Spin, T1/T2 Relaxation & Pulse Sequences 23.2 MRI Safety (Zones I-IV, SAR, Metallic Implants) & Common Artifacts 23.3 MRI Examination Protocols, Patient Preparation, Gadolinium Contrast & Sectional MRI Anatomy
24 Subject 5, Chapter 24: Interventional Radiology & Vascular Imaging
24.1 Vascular Access, Seldinger Technique & Digital Subtraction Angiography (DSA) 24.2 Interventional Procedures (Embolization, Angioplasty, Stenting) & C-Arm Radiation Safety 24.3 Interventional Patient Management: Contrast Selection, Pre-Procedure Workup & Post-Procedure Care
25 Subject 5, Chapter 25: Contrast Media Pharmacology & Adverse Reactions
25.1 Classification of Contrast Agents: Osmolality, Viscosity & Iodine Concentration 25.2 Adverse Contrast Reactions (Mild, Moderate, Severe) & Emergency Treatment Protocols 25.3 General Pharmacologic Principles: Pharmacokinetics, Pharmacodynamics, Drug Categories & the Rights of Drug Safety
26 Subject 5, Chapter 26: Nuclear Medicine & Molecular Imaging
26.1 Radioisotopes, Radiopharmaceuticals & Gamma Camera / SPECT Operation 26.2 Positron Emission Tomography (PET/CT) & Unsealed Radiation Source Safety
27 Subject 5, Chapter 27: Radiation Therapy & Radiation Oncology
27.1 Principles of Radiation Oncology, Linear Accelerators & Treatment Planning 27.2 Teletherapy vs. Brachytherapy, Patient Immobilization & Side Effect Management 27.3 Isodose Planning, Treatment Delivery Methods & Radiobiologic Principles in Radiation Therapy
28 Mammography & Dental Radiography
28.1 Mammography: Equipment, CC and MLO Positioning, Compression & Breast Pathology 28.2 Dental Radiography: Paralleling and Bisecting Techniques, Bitewing, Occlusal, Panoramic & Cephalometric
29 Medical Terminology for Radiologic Technology
29.1 Medical Word Building: Root Words, Combining Forms, Prefixes & Suffixes 29.2 Medical Terms in General Medicine, Abbreviations, Symbols & Critiquing Requests and Reports
30 Radiology Administration, Organization & Leadership
30.1 Organizational Structure, Staffing & Licensing Requirements of a Radiology Facility 30.2 Radiology Department Management: Job Descriptions, Duties, Leadership Styles & Entrepreneurial Skills
18.1 Standard Precautions, Asepsis, Sterilization & Isolation Protocols
Key Takeaways Explain This Topic AI
The chain of infection requires six interconnected links: infectious agent, reservoir, portal of exit, mode of transmission, portal of entry, and susceptible host; breaking any single link halts disease transmission.
Medical asepsis (clean technique) aims to reduce microbial numbers and prevent spread, whereas surgical asepsis (sterile technique) eliminates all microorganisms and bacterial spores required for invasive procedures like myelography and angiography.
Moist heat autoclaving at 121°C (15 psi) is the most efficient sterilization method for heat-stable items, while ethylene oxide (ETO) gas and hydrogen peroxide gas plasma are reserved for heat- and moisture-sensitive instruments.
Transmission-based isolation precautions mandate specific PPE and room controls: Airborne requires N95 respirators and negative-pressure rooms; Droplet requires surgical masks within 3-6 feet; Contact requires gowns, gloves, and soap-and-water handwashing for spore-formers like C. difficile.
The WHO 5 Moments for Hand Hygiene dictate hand sanitization before patient contact, before clean/aseptic steps, after body fluid exposure, after patient contact, and after touching patient surroundings, with a minimum of 20-30 seconds of vigorous friction.
Last updated: August 2026
18.1 Standard Precautions, Asepsis, Sterilization & Isolation Protocols
Infection prevention and control form the foundation of clinical safety in radiologic technology. Radiologic technologists interact daily with diverse patient populations across diagnostic X-ray, fluoroscopy, computed tomography (CT), magnetic resonance imaging (MRI), and interventional suites. Preventing healthcare-associated infections (HAIs) requires a thorough understanding of the chain of infection, rigorous adherence to medical and surgical asepsis, strict application of sterilization modalities, and precise execution of transmission-based isolation protocols.
1. The Chain of Infection
For an infectious disease to spread within a healthcare facility, six sequential components—known as the Chain of Infection —must be present. If any single link in this chain is broken, transmission is successfully halted. [1. Pathogen / Infectious Agent]
- │
- ▼
- [2. Reservoir]
- │
- ▼
- [3. Portal of Exit]
- │
- ▼
- [4. Mode of Transmission]
- │
- ▼
- [5. Portal of Entry]
- │
- ▼
- [6. Susceptible Host]
- The Six Interconnected Links
Infectious Agent (Pathogen) : The microorganism capable of causing disease. Categories include:
Bacteria : Single-celled prokaryotic organisms (e.g., Staphylococcus aureus , Mycobacterium tuberculosis , Clostridioides difficile ).
Viruses : Submicroscopic obligate intracellular parasites (e.g., Hepatitis B and C, HIV, Influenza, SARS-CoV-2).
Fungi : Eukaryotic organisms including yeasts and molds (e.g., Candida albicans , Aspergillus ).
Protozoa : Single-celled eukaryotic organisms (e.g., Giardia lamblia , Plasmodium ).
Prions : Infectious protein particles causing transmissible spongiform encephalopathies (e.g., Creutzfeldt-Jakob disease).
Reservoir : The natural environment, site, or host where the pathogen lives, survives, and multiplies. Reservoirs include human patients, healthcare personnel, animals, standing water, contaminated solutions, and inanimate imaging equipment.
Portal of Exit : The anatomical route through which the pathogen escapes from the reservoir. Examples include the respiratory tract (coughing, sneezing), gastrointestinal tract (feces, vomit), genitourinary tract (urine), blood, transdermal exudates, and mucous membranes.
Mode of Transmission : The mechanism by which the infectious agent is transferred from the reservoir to a new host. Transmission routes are classified as:
Direct Contact : Physical touch between infected body fluids/skin and an uninfected individual (e.g., skin-to-skin contact during patient transfers).
Indirect Contact (Fomite) : Transmission via contaminated inanimate objects (fomites). In radiology, X-ray table tops, digital detectors, image receptors, positioning sponges, lead aprons, and control consoles frequently act as high-risk fomites.
Droplet Transmission : Large infectious particles (> 5 μm) propelled short distances (3 to 6 feet) through the air by coughing, sneezing, or talking.
Airborne Transmission : Small infectious droplet nuclei (< 5 μm) or dust particles containing micro-organisms that remain suspended in air currents for extended periods and travel over long distances.
Vector-borne Transmission : Transfer of pathogens via intermediate animal or insect vectors (e.g., mosquitoes transmitting malaria or dengue; ticks transmitting Lyme disease).
Vehicle Transmission : Contaminated water, food, drugs, or blood products ingested or infused into multiple hosts.
Portal of Entry : The site through which the micro-organism enters the susceptible host. Common entry portals include broken skin (cuts, abrasions), invasive medical devices (intravenous lines, urinary catheters, endotracheal tubes), respiratory tract inhalation, and mucous membranes of the eyes, nose, or mouth.
Susceptible Host : An individual who lacks effective immunity or resistance to a specific pathogen. Susceptibility is heightened in immunocompromised patients, oncology patients undergoing chemotherapy, elderly individuals, neonates, surgical patients, burn victims, and patients with chronic metabolic conditions (e.g., diabetes mellitus).
2. Medical Asepsis vs. Surgical Asepsis
Asepsis is defined as the freedom from infection or the prevention of contact with micro-organisms. Clinical practice divides asepsis into two distinct operational levels: medical asepsis and surgical asepsis .
Medical Asepsis (Clean Technique)
Medical asepsis involves procedures and practices designed to reduce the overall number, growth, and spread of pathogenic micro-organisms. It is referred to as clean technique .
Core Objectives : Suppress microbial proliferation, prevent cross-contamination between patients, and lower pathogen loads to safe levels.
Primary Practices :
Hand Hygiene : Routine washing with soap and running water or application of alcohol-based hand rubs.
Friction Technique : Applying energetic friction for 20 to 30 seconds with alcohol-based hand rub or 40 to 60 seconds when washing with antimicrobial soap and water.
Environmental Disinfection : Regular surface cleaning of equipment (X-ray tables, wall Bucky stands, control booths) using EPA-registered hospital disinfectants.
Personal Protective Equipment (PPE) : Donning gloves, gowns, and masks during routine non-invasive patient handling when fluid exposure is anticipated.
Handling Linens : Carrying soiled linens away from the uniform and placing them directly into designated biohazard bags without shaking.
Surgical Asepsis (Sterile Technique)
Surgical asepsis encompasses procedures used to eliminate ALL micro-organisms, including bacterial endospores, from instruments, drapes, and clinical fields. It is referred to as sterile technique .
Core Objectives : Maintain absolute sterility during invasive procedures where skin or mucous membrane barriers are broken (e.g., myelography, angiography, joint aspiration, central venous line insertion, urinary catheterization).
Golden Rules of the Sterile Field :
Any sterile object or field that comes into contact with an unsterile object becomes contaminated immediately.
If there is any doubt regarding the sterility of an item or package, it MUST be considered contaminated.
Sterile fields must be monitored continuously; walking away or turning one's back on a sterile field creates immediate contamination.
Tables are sterile ONLY at table height; anything hanging below the table edge or waistline is unsterile.
The outer 1-inch (2.5 cm) border of a sterile field or drape is considered unsterile.
Fluids poured onto a sterile field must not splash; liquid soaking through a sterile drape causes capillarity (strike-through contamination) , drawing pathogens from the unsterile surface underneath.
Sterile personnel must keep hands abduct above waist level and below shoulder level, in front of the chest, at all times.
Sterilization Modalities
Sterilization is the absolute destruction of all living micro-organisms and bacterial spores. The primary methods utilized in medical facilities include:
Sterilization Method Mechanism of Action Operational Parameters Best Suited For Critical Limitations
Autoclaving (Moist Heat) Coagulation and denaturation of cellular proteins using steam under pressure 121°C (250°F) at 15 psi for 15–30 min OR 132°C (270°F) at 27 psi for 4 min Surgical metal instruments, glass syringes, surgical linen packs Destroys heat-sensitive plastics, dulls sharp cutting edges, rusts carbon steel
Ethylene Oxide (ETO) Gas Alkylation of cellular DNA and proteins Low temperature (37°C–55°C), relative humidity 40%–80%, extended cycle time (3–12 hrs) Heat- and moisture-sensitive instruments, electronic catheters, plastic scopes Highly toxic, carcinogenic, explosive; requires extensive aeration (8–12 hrs) to remove residues
Gas Plasma (Hydrogen Peroxide) Free radical generation disrupting cell membranes and nucleic acids Low temperature (45°C–50°C), radiofrequency gas plasma, rapid cycle (28–75 min) Delicate endoscopic instruments, fiberoptics, electrical sensors Cannot process cellulose (paper, linen), liquids, or deep narrow-lumen catheters
Chemical Sterilants (Cold) High-level chemical immersion (e.g., 2% Glutaraldehyde / Cidex) Total immersion for 10 hours for full sterilization (20 min for high-level disinfection) Lensed endoscopes, flexible fiberoptic scopes Requires thorough rinsing with sterile water; chemical vapors irritate skin and mucosa
3. Transmission-Based Isolation Precautions
Transmission-Based Precautions are designed for patients documented or suspected to be infected with highly transmissible pathogens. They are applied in addition to Standard Precautions (which apply to all patients at all times). ┌────────────────────────────────┐
- │ Standard Precautions │
- │ (Applied to ALL Patients) │
- └───────────────┬────────────────┘
- │
- ┌────────────────────────────┼────────────────────────────┐
- ▼ ▼ ▼
- ┌────────────────────┐ ┌────────────────────┐ ┌────────────────────┐
- │ Airborne Isolation │ │ Droplet Isolation │ │ Contact Isolation │
- │ (N95, Neg Pressure)│ │ (Surgical Mask 3-6ft)│ │(Gown, Gloves, Soap)│
- └────────────────────┘ └────────────────────┘ └────────────────────┘
- Transmission-Based Isolation Precautions Summary Table
Precaution Type Pathogen Examples PPE Required Room Ventilation & Transport Rules Specific Radiologic Technologist Actions
Airborne Precautions Mycobacterium tuberculosis , Measles (Rubeola), Varicella (Chickenpox), Disseminated Herpes Zoster Fit-tested N95 respirator (or Powered Air-Purifying Respirator / PAPR) prior to entering room Airborne Infection Isolation Room (AIIR) with negative pressure, 6–12 air changes/hour, HEPA filtration; keep door closed Place surgical mask on patient during transport; technologist wears N95; clean room equipment thoroughly post-procedure
Droplet Precautions Influenza virus, Neisseria meningitidis (meningococcal meningitis), Pertussis, Mumps, Rubella Surgical mask worn within 3 to 6 feet of patient; eye protection (goggles/face shield) if splashing expected Private room preferred (or cohorting); no special negative pressure air ventilation required; door may remain open Place surgical mask on patient during transport; clean cassette and Bucky surface with disinfectant after exposure
Contact Precautions Methicillin-Resistant Staph. aureus (MRSA), Vancomycin-Resistant Enterococcus (VRE), C. difficile , Scabies Clean gown and gloves donned upon room entry; remove PPE and perform hand hygiene before leaving room Private room preferred; dedicated non-critical equipment (stethoscope, blood pressure cuff, lead aprons) For C. difficile , MUST perform hand hygiene with soap and water (alcohol rubs do not kill endospores); cover IR with plastic barrier
4. Hand Hygiene Protocols & WHO 5 Moments
Hand hygiene is universally recognized as the single most effective intervention to prevent healthcare-associated infections. Micro-organisms on the technologist's hands are easily transferred between equipment and vulnerable patients.
Alcohol-Based Hand Rub vs. Soap and Water
Alcohol-Based Hand Rub (ABHR) : The preferred method for routine hand antisepsis when hands are not visibly soiled . ABHR containing 60% to 95% ethanol or isopropanol rapidly reduces microbial counts. Apply product to palm and rub all surfaces vigorously for 20 to 30 seconds until completely dry.
Soap and Water Handwashing : Mandatory when hands are visibly dirty, contaminated with blood or body fluids , after using the restroom, before eating, and after caring for patients with spore-forming pathogens (e.g., Clostridioides difficile or Bacillus anthracis ). Wet hands with water, apply soap, and rub all surfaces vigorously for 40 to 60 seconds (with at least 15–20 seconds of pure mechanical friction), then rinse thoroughly under running water and dry with disposable towels.
The WHO 5 Moments for Hand Hygiene
Radiologic technologists must perform hand hygiene at five critical clinical junctures during patient care:
Before Touching a Patient : Clean hands prior to approaching or touching a patient (e.g., assisting onto the X-ray table, palpating anatomical landmarks).
Before a Clean / Aseptic Procedure : Clean hands immediately before performing any aseptic task (e.g., preparing contrast media injection, handling urinary catheters, opening sterile IV supplies).
After Body Fluid Exposure Risk : Clean hands immediately after any potential or actual exposure to body fluids, secretions, excretions, or non-intact skin (e.g., removing gloves after venipuncture or cleaning emesis).
After Touching a Patient : Clean hands upon leaving the patient's immediate vicinity after touching the patient or their clothes.
After Touching Patient Surroundings : Clean hands after touching any inanimate object, furniture, or equipment in the patient's immediate environment (e.g., adjusting control panel, touching X-ray tube handle, moving side rails), even if the patient was not directly touched.