Study guide
30.2 Radiology Department Management: Job Descriptions, Duties, Leadership Styles & Entrepreneurial Skills
Philippine Radiologic Technologists Licensure Examination Exam
Track your progress as you read
Finished sections get a check mark.
1 Subject 1, Chapter 1: Physics of Radiology & X-Ray Production
1.1 Atomic Structure, Electromagnetic Spectrum & X-Ray Production Mechanisms 1.2 X-Ray Tube Components, Target Interactions & Emission Spectrum 1.3 Photon Interactions with Matter: Photoelectric, Compton, Coherent & Pair Production
2 Subject 1, Chapter 2: Radiographic Equipment & Circuitry
2.1 High-Voltage Generators, Transformers & Rectification Circuits 2.2 Automatic Exposure Control (AEC), Beam Restriction & Quality Control 2.3 Tube Rating Charts, Extending Tube Life, Mechanical Malfunction & Preventive Maintenance
3 Subject 1, Chapter 3: Radiobiology & Cellular Response
3.1 Radiation Interaction with Tissue, Direct/Indirect Action & LET/RBE 3.2 Law of Bergonie & Tribondeau, Deterministic vs. Stochastic Effects 3.3 Dose-Response Relationships, Embryo and Fetal Effects & Acute Radiation Syndrome
4 Subject 1, Chapter 4: Radiation Protection & Dose Limits
4.1 ALARA Principles, Structural Shielding & Dose Limits 4.2 Personnel Dosimetry & Patient Dose Reduction Techniques 4.3 Dose Calculation Problems: Time, Distance, Shielding & Structural Barrier Design
5 Subject 1, Chapter 5: Imaging Informatics & Quality Assurance
5.1 PACS Architecture, DICOM Standards & HL7 Integration 5.2 Quality Assurance & Quality Control Protocols in Diagnostic Radiography 5.3 Radiology Workflow, RIS/HIS Integration, Teleradiology & Informatics Quality Assurance
6 Subject 2, Chapter 6: Film-Screen Radiography & Sensitometry
6.1 Film Emulsion, Latent Image Formation & Darkroom Chemistry 6.2 Sensitometric Curve (H&D Curve), Film Speed & Contrast Characteristics 6.3 Radiographic Film Analysis: Processing Faults, Handling Artifacts & Corrective Measures
7 Subject 2, Chapter 7: Technical Factors & Radiographic Quality
7.1 Density/Brightness, Contrast, Spatial Resolution & Distortion Controls 7.2 Exposure Math: Inverse Square Law, 15% Rule & Grid Conversion Factors 7.3 Technique Compensation: Age, Pathology, Cast and Orthopaedic Devices, Screen Speed & Beam Restriction
8 Subject 2, Chapter 8: Computed Radiography (CR)
8.1 Photostimulable Phosphor (PSP) Plates & CR Reader Mechanics 8.2 Image Processing, CR Artifacts & Erasure Protocols
9 Subject 2, Chapter 9: Digital Radiography (DR)
9.1 Flat-Panel Detectors: Direct vs. Indirect Conversion & TFT Arrays 9.2 Detective Quantum Efficiency (DQE), Modulation Transfer Function (MTF) & Dynamic Range
10 Subject 2, Chapter 10: Exposure Indicators & Image Evaluation
10.1 Exposure Indicators (S-Number, EI, DI), Windowing & Look-Up Tables (LUT) 10.2 Image Critique Checklist, Artifact Identification & Quality Control Standards 10.3 Image Display & Hard-Copy Output: Monitor Classification, DICOM GSDF, Dry vs Wet Laser Imaging
11 Subject 3, Chapter 11: Chest, Abdomen & Routine Positioning Concepts
11.1 Anatomical Terminology, Body Planes & Chest Radiography (PA, Lateral, Decubitus) 11.2 Abdominal Radiography: Acute Abdomen Series & Erect/Supine Protocols 11.3 Radiologic Surface Anatomy, Body Habitus & Sectional Body Cuts
12 Subject 3, Chapter 12: Upper & Lower Extremities & Girdles
12.1 Upper Limb & Shoulder Girdle Positioning (Hand, Wrist, Forearm, Elbow, Humerus, Shoulder) 12.2 Lower Limb & Pelvic Girdle Positioning (Foot, Ankle, Leg, Knee, Femur, Pelvis, Hip)
13 Subject 3, Chapter 13: Spine & Bony Thorax
13.1 Cervical, Thoracic & Lumbar Spine Radiography & Trauma Adaptations 13.2 Sacrum, Coccyx, Sacroiliac Joints & Bony Thorax (Ribs & Sternum)
14 Subject 3, Chapter 14: Cranium, Facial Bones & Paranasal Sinuses
14.1 Skull Positioning: Towne, Caldwell, Lateral & SMV Projections 14.2 Facial Bones, Orbits, Zygomatic Arches & Paranasal Sinuses
15 Subject 3, Chapter 15: Contrast Media Studies & Special Procedures
15.1 Gastrointestinal Contrast Procedures (Esophagram, UGI, Small Bowel, Barium Enema) 15.2 Genitourinary, Biliary & Special Fluoroscopic Studies (IVU, Cystography, ERCP, Myelography) 15.3 Reproductive System Studies: Hysterosalpingography, Pelvimetry & Male Reproductive Procedures 15.4 Nasopharyngography, Sialography & Fistulography / Sinus Tract Visualization
16 Subject 4, Chapter 16: Human Anatomy, Physiology & Pathology Integration
16.1 Body System Anatomy & Systemic Physiology Overview for Radiographers 16.2 Radiologic Pathology: Image Manifestations of Neoplastic, Inflammatory & Traumatic Conditions
17 Subject 4, Chapter 17: Patient Assessment, Communication & Informed Consent
17.1 Professional Communication, History Taking & Patient Rights 17.2 Informed Consent, Medical Documentation & Patient Transfer Safety
18 Subject 4, Chapter 18: Infection Control & Vital Signs Monitoring
18.1 Standard Precautions, Asepsis, Sterilization & Isolation Protocols 18.2 Measurement & Assessment of Vital Signs (BP, Pulse, Respiration, Temperature)
19 Subject 4, Chapter 19: Emergency Care & Aseptic Venipuncture
19.1 Basic Life Support (BLS), CPR Concepts & Emergency Response in Radiology 19.2 Aseptic Venipuncture Technique, IV Maintenance & Extravasation Care
20 Subject 4, Chapter 20: Professional Ethics, Jurisprudence & RA 7431
20.1 Republic Act No. 7431 (Radiologic Technology Act of 1992) & Board Rules 20.2 Code of Professional Ethics, Legal Liabilities, Malpractice & Negligence 20.3 Bioethical Principles in Practice, Professional Virtues & Interprofessional Relationships
21 Subject 5, Chapter 21: Diagnostic Ultrasonography
21.1 Ultrasound Physics, Transducer Construction & Doppler Principles 21.2 Acoustic Artifacts, Clinical Applications & Safety (TI/MI) 21.3 Clinical Ultrasound Examinations: Indications, Patient Preparation, Scanning Protocols & Transducer Selection
22 Subject 5, Chapter 22: Computed Tomography (CT)
22.1 CT Physics, Gantry Components, Detectors & Helical/Multislice Acquisition 22.2 Hounsfield Units, Windowing, CT Artifacts & Radiation Dose (CTDI/DLP)
23 Subject 5, Chapter 23: Magnetic Resonance Imaging (MRI)
23.1 MRI Physics, Nuclear Spin, T1/T2 Relaxation & Pulse Sequences 23.2 MRI Safety (Zones I-IV, SAR, Metallic Implants) & Common Artifacts 23.3 MRI Examination Protocols, Patient Preparation, Gadolinium Contrast & Sectional MRI Anatomy
24 Subject 5, Chapter 24: Interventional Radiology & Vascular Imaging
24.1 Vascular Access, Seldinger Technique & Digital Subtraction Angiography (DSA) 24.2 Interventional Procedures (Embolization, Angioplasty, Stenting) & C-Arm Radiation Safety 24.3 Interventional Patient Management: Contrast Selection, Pre-Procedure Workup & Post-Procedure Care
25 Subject 5, Chapter 25: Contrast Media Pharmacology & Adverse Reactions
25.1 Classification of Contrast Agents: Osmolality, Viscosity & Iodine Concentration 25.2 Adverse Contrast Reactions (Mild, Moderate, Severe) & Emergency Treatment Protocols 25.3 General Pharmacologic Principles: Pharmacokinetics, Pharmacodynamics, Drug Categories & the Rights of Drug Safety
26 Subject 5, Chapter 26: Nuclear Medicine & Molecular Imaging
26.1 Radioisotopes, Radiopharmaceuticals & Gamma Camera / SPECT Operation 26.2 Positron Emission Tomography (PET/CT) & Unsealed Radiation Source Safety
27 Subject 5, Chapter 27: Radiation Therapy & Radiation Oncology
27.1 Principles of Radiation Oncology, Linear Accelerators & Treatment Planning 27.2 Teletherapy vs. Brachytherapy, Patient Immobilization & Side Effect Management 27.3 Isodose Planning, Treatment Delivery Methods & Radiobiologic Principles in Radiation Therapy
28 Mammography & Dental Radiography
28.1 Mammography: Equipment, CC and MLO Positioning, Compression & Breast Pathology 28.2 Dental Radiography: Paralleling and Bisecting Techniques, Bitewing, Occlusal, Panoramic & Cephalometric
29 Medical Terminology for Radiologic Technology
29.1 Medical Word Building: Root Words, Combining Forms, Prefixes & Suffixes 29.2 Medical Terms in General Medicine, Abbreviations, Symbols & Critiquing Requests and Reports
30 Radiology Administration, Organization & Leadership
30.1 Organizational Structure, Staffing & Licensing Requirements of a Radiology Facility 30.2 Radiology Department Management: Job Descriptions, Duties, Leadership Styles & Entrepreneurial Skills
30.2 Radiology Department Management: Job Descriptions, Duties, Leadership Styles & Entrepreneurial Skills
Key Takeaways Explain This Topic AI
A job description states the position title, reporting relationship, qualifications and credentials required, principal duties, working conditions and performance standards, and it is the basis for recruitment, orientation, appraisal and disciplinary action.
The classical leadership styles are autocratic, democratic or participative, and laissez-faire, and the situational view holds that the appropriate style depends on the competence and commitment of the staff and on the urgency of the task.
Transactional leadership motivates through exchange, rewards and correction, while transformational leadership motivates through vision, individual consideration, intellectual stimulation and role modelling.
Radiology budgeting distinguishes the operating budget, which covers salaries, consumables, contrast, maintenance contracts and utilities, from the capital budget, which covers equipment purchases evaluated by payback period and total cost of ownership.
Entrepreneurial competence for a radiologic technologist includes costing a service accurately, understanding referral and payer mix, complying with facility and device licensing before opening, and never allowing a commercial incentive to override the justification of an exposure.
Last updated: August 2026
30.2 Radiology Department Management: Job Descriptions, Duties, Leadership Styles & Entrepreneurial Skills
Elements of Administration and Radiology Department Management carries 8 items and two competencies: relate the radiological personnel's job description, duties, and obligations , and distinguish leadership and entrepreneurial attitudes, behavior, and skills . The second competency is unusual among licensure blueprints and reflects the reality that many Filipino radiologic technologists will at some point run a diagnostic clinic, manage a mobile screening service, or supervise a department.
1. The Job Description
A job description is a written statement of what a position exists to do. It contains:
Position title and department .
Reporting relationship — to whom the holder reports, and who reports to them.
Qualifications — education, PRC credential, experience, certifications such as basic life support.
Principal duties and responsibilities , in order of importance.
Working conditions — shifts, radiation exposure, physical demands, on-call requirement.
Performance standards — measurable expectations against which the holder will be appraised.
It matters because it is the legal and managerial anchor for recruitment advertising, selection criteria, orientation, competency assessment, performance appraisal, disciplinary action, and defence of scope of practice. A dispute about whether a task was "your job" is settled by the job description.
Core duties by role
Role Principal duties
Chief / Head Radiologic Technologist Plans and organises technical services; prepares rosters and budgets; supervises and appraises technical staff; oversees quality assurance, radiation protection and equipment procurement; liaises with the medical director, physicist and engineering; maintains records; leads incident investigation
Supervisory / Senior Radiologic Technologist Runs a modality day to day; enforces protocols; trains and mentors; troubleshoots first-line equipment problems; manages consumables; reports deviations
Staff Radiologic Technologist Verifies patient identity and the request; positions and exposes; applies radiation protection; administers contrast within scope and under the applicable protocol; evaluates image quality; documents; maintains a safe and clean workspace; responds to emergencies; participates in quality control
X-Ray Technologist Performs basic diagnostic radiographic procedures strictly within the scope authorised by the credential held under RA 7431
Radiology Nurse Pre-procedure assessment; cannulation; medication and sedation administration and monitoring; management of contrast reactions; recovery care
Medical Physicist Acceptance testing; calibration; dosimetry; shielding design; quality control programme; dose optimisation and audit
Radiology Clerk / Receptionist Registration, scheduling, records management, report distribution, patient enquiries
PACS Administrator System availability, user accounts, worklist and routing rules, exception queue reconciliation, archive integrity
Obligations that attach to every role
Confidentiality; working within scope; maintaining registration and continuing professional development; reporting incidents, near misses and unsafe practice; radiation protection of self, patients and others; honest documentation; and courteous, non-discriminatory treatment of patients and colleagues.
2. Performance Management and Discipline
Performance appraisal compares actual performance against the standards in the job description. Good practice is: standards agreed in advance, evidence gathered continuously rather than recalled at year end, self-assessment first, a two-way discussion, written outcomes, and an agreed development plan. Common errors examiners test: the halo effect (one strong trait colours the whole rating), the horn effect (its negative twin), central tendency (rating everyone average), recency bias (judging on the last month only), and leniency or severity bias .
Progressive discipline escalates: verbal counselling, written warning, final written warning, suspension, and dismissal — with due process at each stage, meaning notice of the allegation, an opportunity to be heard and to be assisted, and a written decision. Serious misconduct — falsifying records, breaching confidentiality, practising while impaired, working outside scope, wilfully exposing a patient without justification — may bypass the earlier stages and may additionally require notification to the PRC , since these are grounds on which the Board may act under Section 9(c) of RA 7431.
- 3. Leadership
- Classical styles
Style Decision-making Works best when Risk
Autocratic (authoritarian) Leader decides alone Emergencies , cardiac arrest in the CT suite, radiation incidents, inexperienced staff Demotivation, no development, dependency
Democratic (participative) Leader consults and decides with the team Protocol development, roster design, quality improvement, experienced staff Slow; unsuitable in a crisis
Laissez-faire (delegative) Team decides; leader supports Highly competent, self-directed specialists working on defined projects Drift, inconsistency, unclear accountability
The situational principle: the correct style depends on the competence and commitment of the staff and on the urgency and risk of the task . A new graduate on their first mobile round needs directive leadership; a senior CT technologist designing a paediatric protocol needs participative or delegative leadership. An examination item that asks for "the best leadership style" without context is almost always answered by situational or contingency leadership .
Transactional versus transformational
- Transactional Transformational
- Motivation Exchange — reward for performance, correction for deviation Vision, meaning and personal growth
- Focus Maintaining current standards Raising standards and changing culture
Tools Targets, incentives, monitoring, contingent reward Idealised influence (role modelling), inspirational motivation , intellectual stimulation , individualised consideration
Best for Stable, well-defined operations Change programmes, service redesign, professional development
Servant leadership — leading by removing obstacles for the team — is increasingly the model taught in health professions, and sits comfortably alongside transformational leadership.
Leadership behaviours that matter in a radiology department
Clear communication; visible presence during difficult lists; fair rostering; protecting staff from unjustified requests; escalating equipment and safety problems persistently; giving credit publicly and criticism privately; and modelling the radiation-protection behaviour expected of others. A supervisor who does not wear a dosimeter cannot enforce dosimetry.
4. Communication and Conflict
Communication channels. Formal downward (policies, briefings), formal upward (incident reports, suggestions), horizontal (between modalities and with wards), and informal (the grapevine, which is fast, influential and frequently wrong — managers manage it by communicating first).
Barriers include jargon, noise, interruption, hierarchy, language differences, assumption and fatigue. Structured handover tools — situation, background, assessment, recommendation — reduce error at the highest-risk moments: patient handover, shift change and escalation of a deteriorating patient.
Conflict-handling modes: competing (fast, needed in a safety emergency), collaborating (best long-term outcome, slowest), compromising (workable, partial satisfaction), avoiding (appropriate only for trivial or cooling-off situations), and accommodating (preserves relationship, concedes the issue). The managerially preferred default is collaborating , with competing reserved for immediate safety.
5. Financial Management
Budget type Contents Key questions
Operating (revenue) budget Salaries and benefits, contrast media and consumables, film and printing, maintenance contracts, utilities, supplies What does it cost to run the service for a year?
Capital budget Equipment purchases and major refurbishment What is the total cost of ownership — purchase, installation, shielding, training, service contract, consumables, useful life and disposal — and what is the payback period ?
Cost concepts to be able to define: fixed costs (rent, salaries, depreciation — unchanged by volume), variable costs (contrast, film, consumables — proportional to volume), direct costs (attributable to a specific examination) and indirect or overhead costs (shared across the department). Break-even volume is the number of examinations at which total revenue equals total cost, and it is the single most useful number when deciding whether to add a modality.
Inventory management matters more than it sounds: contrast media, film, consumables and radiopharmaceuticals all carry expiry dates , so stock is rotated first in, first out ; par levels and re-order points prevent both stock-outs and expiry write-offs; and radiopharmaceuticals additionally decay, making delivery scheduling part of the clinical protocol.
6. Quality and Service Improvement
Quality control (QC) is the technical measurement of equipment performance.
Quality assurance (QA) is the wider programme — policies, training, audit, records — that ensures the service consistently meets standards.
Quality improvement (QI) / total quality management is the continuous cycle of improvement, commonly framed as plan, do, check, act , and driven by data.
Departmental indicators worth monitoring: repeat/reject rate by cause and body part; report turnaround time; waiting time; room utilisation; patient dose against diagnostic reference levels; contrast reaction rate; incident and near-miss counts; and patient satisfaction. Each indicator needs an owner, a target and a review cadence — otherwise it is decoration.
7. Entrepreneurial Attitudes, Behaviours and Skills
The Board asks specifically about these, so treat them as examinable content.
Competency What it means for a radiologic technologist
Opportunity recognition Identifying an unserved need — a barangay with no imaging access, a mobile screening service, an occupational-health chest programme
Feasibility and costing Building a realistic model: equipment, shielding, licensing, staffing, consumables, rent, expected volume, price per examination, break-even volume
Regulatory compliance first Facility licence, device registration, shielding approval and radiation survey, a supervising radiologist, and PRC-registered staff — before the doors open. A clinic operating without these is not a business risk, it is a penal offence under Section 26 of RA 7431
Risk management Professional indemnity, equipment downtime and service contracts, receivables, contingency reserves
Marketing and referral relationships Honest, evidence-based promotion; reliable turnaround; good communication with referrers. Fee-splitting and inducements for referrals are ethically prohibited
Financial literacy Cash flow, depreciation, pricing, payer and insurance mix, collections
Innovation and adaptability Adopting teleradiology to obtain reports, digital workflow to cut film cost, and appointment systems to smooth demand
Integrity under commercial pressure The decisive competency. A commercial incentive can never justify an unjustified exposure. Package deals that bundle unnecessary imaging, self-referral for revenue, and repeating studies to bill again are ethical and legal violations
Attitudes and behaviours the blueprint associates with entrepreneurship: initiative, calculated risk-taking, persistence, self-confidence tempered by realism, goal orientation, responsiveness to feedback, and a commitment to learning. Note that all of them are exercised inside an ethical and regulatory boundary — the entrepreneurial radiologic technologist is still bound by RA 7431, the Code of Ethics, the Data Privacy Act, and the principle of justification.