Study guide
4.2 Special Collection Procedures
CPT Certified Phlebotomy Technician Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction: CPT Phlebotomy Exam Overview
NHA CPT Exam Overview CPT Certification Process Anatomy & Physiology for Phlebotomists
2 Chapter 1: Safety & Compliance (26%)
1.1 Infection Control & Personal Protective Equipment (PPE) 1.2 OSHA Regulations & Workplace Safety
3 Chapter 2: Patient Preparation & Identification (20%)
2.1 Patient Identification & Communication 2.2 Patient Preparation & Positioning
4 Chapter 3: Venipuncture Procedures (Routine Blood Collections, 28%)
3.1 Venipuncture Equipment & Technique 3.2 Order of Draw 3.3 Difficult Draws & Complications
5 Chapter 4: Capillary Puncture (Routine Blood Collections) & Special Collections (12%)
4.1 Capillary (Dermal) Puncture Technique 4.2 Special Collection Procedures
6 Chapter 5: Specimen Handling & Processing (14%)
5.1 Specimen Labeling & Transport 5.2 Specimen Processing & Quality Assurance
4.2 Special Collection Procedures
Key Takeaways Explain This Topic AI
Blood cultures require strict aseptic technique — clean the site with chlorhexidine or povidone-iodine (NOT just alcohol), and clean the bottle tops with alcohol
Two sets of blood cultures from two different venipuncture sites are standard to distinguish true bacteremia from contamination
The glucose tolerance test (GTT) requires a fasting specimen, followed by a glucose drink, then timed blood draws at 30, 60, 120, and sometimes 180 minutes
Peak drug levels are drawn 30-60 minutes after drug administration (when the drug is at its highest concentration)
Trough drug levels are drawn immediately BEFORE the next scheduled dose (when the drug is at its lowest concentration)
Chain of custody specimens require strict documentation — the specimen must be in someone's possession at all times and tamper-evident seals must be applied
Arterial blood gas (ABG) specimens are typically collected by respiratory therapists or specially trained phlebotomists from the radial, brachial, or femoral artery
Cold agglutinin specimens must be kept at body temperature (37C) and transported in a pre-warmed container — cooling causes the antibodies to bind and invalidates the test
Last updated: October 2026
Beyond routine venipuncture and capillary puncture, phlebotomists must be familiar with specialized collection procedures that require additional skills, timing, or handling.
Blood Cultures
Blood cultures detect bacteremia (bacteria in the blood) and septicemia (systemic infection). They require the most stringent collection technique of any phlebotomy procedure.
Collection Protocol
- Step Procedure
- Site preparation Clean with chlorhexidine (preferred) or povidone-iodine — NOT just alcohol
- Drying time Allow antiseptic to dry completely (30 seconds for chlorhexidine; 1.5-2 minutes for iodine)
- Bottle top preparation Wipe bottle tops with 70% isopropyl alcohol
Number of sets At least two sets (one aerobic + one anaerobic bottle each) from separate venipuncture sites , usually drawn together or within about an hour; spaced draws only when ordered (for example, suspected endocarditis)
- Volume Fill each bottle to the recommended volume (about 10 mL per adult bottle)
- Winged (butterfly) set Fill the aerobic bottle first : air in the tubing goes into the first bottle
Needle and syringe Follow the bottle manufacturer's instructions (bioMérieux BacT/ALERT says anaerobic bottle first; if less than the recommended volume is drawn, it says to fill the aerobic bottle first)
Why Two Sets from Two Sites?
Helps distinguish true bacteremia (both sets positive with the same organism) from contamination (only one set positive)
- A single positive culture may represent a skin contaminant (common organisms like S. epidermidis)
- Timing
- Ideally collected before antibiotic therapy begins
- If the patient is already on antibiotics, collect just before the next dose (trough level)
- For fever spikes: some physicians order cultures to be drawn during temperature elevations
- Glucose Tolerance Test (GTT)
The oral glucose tolerance test (OGTT) evaluates the body's ability to metabolize glucose over time. It is used to diagnose gestational diabetes and type 2 diabetes .
Standard GTT Protocol
- Step Timing Action
- Fasting specimen Time 0 Draw fasting blood glucose (patient fasts 8-12 hours)
Glucose load After fasting draw Patient drinks 75g glucose solution (100g for gestational diabetes screening) within 5 minutes
- 30-minute draw 30 min post-glucose May be optional depending on physician order
- 1-hour draw 60 min post-glucose Blood draw
- 2-hour draw 120 min post-glucose Blood draw
- 3-hour draw 180 min post-glucose Only for gestational diabetes screening with 100g glucose
- Patient Instructions During GTT
- Patient must remain seated and not eat, smoke, or chew gum during the test
- Only water is permitted
- Patient should not exercise (physical activity lowers glucose)
- If the patient vomits the glucose solution, the test must be rescheduled
- All specimens are collected in gray-top tubes (sodium fluoride preserves glucose)
- Peak and Trough Drug Levels
Monitoring drug levels helps ensure medications are at therapeutic (effective but not toxic) concentrations.
Level When to Draw Purpose
Trough Immediately BEFORE the next scheduled dose Measures the lowest drug concentration — ensures it stays above the minimum effective level
Peak 30-60 minutes after drug administration (IV); 1-2 hours after oral dose Measures the highest drug concentration — ensures it does not reach toxic levels
- Common Drugs Requiring Levels
- Vancomycin — antibiotic (trough and peak monitored)
- Gentamicin / Tobramycin — aminoglycoside antibiotics (nephrotoxic and ototoxic at high levels)
- Digoxin — cardiac medication (narrow therapeutic window)
- Lithium — psychiatric medication (narrow therapeutic window)
- Phenytoin (Dilantin) — anti-seizure medication
- Theophylline — respiratory medication
Critical: Timing is everything for peak and trough draws. Document the exact time of the draw and the time of the last dose on the requisition.
Arterial Blood Gas (ABG) Collection
ABG analysis measures blood pH, partial pressures of oxygen (PaO2) and carbon dioxide (PaCO2), and bicarbonate (HCO3-) to assess respiratory and metabolic function.
- Detail Information
- Who collects Respiratory therapists, specially trained phlebotomists, nurses, or physicians
- Common sites Radial artery (preferred), brachial artery, femoral artery
Allen test Performed before radial artery puncture to confirm adequate collateral circulation from the ulnar artery
- Syringe type Pre-heparinized ABG syringe
- Handling Remove all air bubbles immediately; cap syringe; place on ice; transport to lab within 30 minutes
- Post-collection Apply firm pressure for at least 5 minutes (10 minutes for patients on anticoagulants)
- The Allen Test (Modified Allen Test)
- Have the patient make a tight fist
- Occlude both the radial and ulnar arteries with your fingers
- Have the patient open their hand — the palm should be pale/blanched
- Release pressure on the ulnar artery only
- Positive (normal): Color returns to the hand within 5-10 seconds — safe to puncture the radial artery
Negative (abnormal): Color does NOT return within 10 seconds — do NOT puncture the radial artery (inadequate collateral circulation)
Chain of Custody Specimens
Chain of custody (COC) applies to forensic specimens such as drug testing for legal purposes (employment, court-ordered, probation).
Key Requirements
- Requirement Details
- Documentation Every person who handles the specimen must be documented (name, date, time, signature)
- Continuous possession The specimen must be in someone's custody at all times — no unattended storage
- Tamper-evident seals Applied in the patient's presence; patient verifies and initials the seal
- Witnessed collection Some protocols require direct observation of specimen production (urine)
- Photo ID verification Required for the donor/patient
- Split specimen A portion may be preserved in a separate container for independent confirmation testing
- Other Special Specimens
Specimen Type Special Handling
Cold agglutinins Keep at body temperature (37C) — transport in pre-warmed container; cooling invalidates the test
- Cryoglobulins Keep at body temperature (37C) — similar to cold agglutinins
- Ammonia Transport on ice immediately; specimen degrades rapidly at room temperature
- Lactic acid Collect without tourniquet if possible; transport on ice ; patient should not clench fist
Light-sensitive specimens (bilirubin, vitamin B12, folate) Wrap in aluminum foil or amber-colored tubes to protect from light degradation
- Coagulation specimens (PT/INR, PTT) Must be tested within 4 hours of collection; keep at room temperature
- Bleeding Time Test
The bleeding time test (Ivy method) assesses platelet function and vascular integrity. While less commonly performed today (replaced by PFA-100 in many labs), it may still appear on the CPT exam:
- Procedure
- Apply a blood pressure cuff to the upper arm and inflate to 40 mmHg
- Clean the inner forearm with alcohol and allow to dry
- Make a standardized incision using a bleeding time device (spring-loaded blade)
- Start the timer immediately
- Blot the blood every 30 seconds with filter paper — do NOT touch the wound directly
- Record the time when bleeding stops
- Normal bleeding time: 2-9 minutes (varies by method)
- Clinical Significance
Prolonged bleeding time may indicate: platelet disorders (thrombocytopenia), von Willebrand disease, aspirin or NSAID use, or vascular disorders
- Patients should be instructed to avoid aspirin and NSAIDs for 7-10 days before the test
- 2-Hour Postprandial Glucose
This test measures glucose levels 2 hours after a meal to assess glucose tolerance:
- Patient eats a standard meal (or glucose load)
- Blood is drawn exactly 2 hours after the meal begins
- Collected in a gray-top tube (sodium fluoride)
- Normal: Less than 140 mg/dL (2 hours postprandial)
- Impaired glucose tolerance: 140-199 mg/dL
- Diabetes: 200 mg/dL or higher
- Cortisol and Diurnal Variation
Some hormones follow a diurnal (daily) pattern and must be collected at specific times:
- Hormone Peak Time Trough Time Collection Notes
- Cortisol Early morning (6-8 AM) Evening (4 PM - midnight) AM and PM specimens may be ordered
- Iron Morning (highest) Evening (lowest) Best collected in the morning fasting
- TSH Early morning (highest) Afternoon (lower) AM collection preferred
- Growth hormone During sleep During the day Special stimulation tests may be ordered