Study guide
Anatomy & Physiology for Phlebotomists
CPT Certified Phlebotomy Technician Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction: CPT Phlebotomy Exam Overview
NHA CPT Exam Overview CPT Certification Process Anatomy & Physiology for Phlebotomists
2 Chapter 1: Safety & Compliance (26%)
1.1 Infection Control & Personal Protective Equipment (PPE) 1.2 OSHA Regulations & Workplace Safety
3 Chapter 2: Patient Preparation & Identification (20%)
2.1 Patient Identification & Communication 2.2 Patient Preparation & Positioning
4 Chapter 3: Venipuncture Procedures (Routine Blood Collections, 28%)
3.1 Venipuncture Equipment & Technique 3.2 Order of Draw 3.3 Difficult Draws & Complications
5 Chapter 4: Capillary Puncture (Routine Blood Collections) & Special Collections (12%)
4.1 Capillary (Dermal) Puncture Technique 4.2 Special Collection Procedures
6 Chapter 5: Specimen Handling & Processing (14%)
5.1 Specimen Labeling & Transport 5.2 Specimen Processing & Quality Assurance
Anatomy & Physiology for Phlebotomists
Key Takeaways Explain This Topic AI
The circulatory system consists of the heart, blood vessels (arteries, veins, capillaries), and blood
Arteries carry oxygenated blood AWAY from the heart (except pulmonary arteries); veins carry deoxygenated blood TOWARD the heart (except pulmonary veins)
Blood consists of plasma (55%) and formed elements (45%) — red blood cells, white blood cells, and platelets
The three layers of a blood vessel are: tunica intima (inner), tunica media (middle), and tunica adventitia (outer)
Red blood cells (erythrocytes) carry oxygen via hemoglobin and have a lifespan of approximately 120 days
White blood cells (leukocytes) fight infection — types include neutrophils, lymphocytes, monocytes, eosinophils, and basophils
Platelets (thrombocytes) are essential for hemostasis (blood clotting) and are fragments of megakaryocytes
The coagulation cascade involves intrinsic and extrinsic pathways that converge at the common pathway to form a fibrin clot
Last updated: February 2026
A solid understanding of the circulatory system, blood composition, and hemostasis is essential for phlebotomy practice. This knowledge helps you select appropriate veins, understand why certain tests require specific tubes, and recognize complications.
- The Circulatory System
- Blood Vessels
Vessel Type Direction Characteristics Phlebotomy Relevance
Arteries Away from heart Thick-walled, muscular, pulsating, bright red blood ABG collection only — NOT routine phlebotomy
Veins Toward heart Thinner-walled, contain valves, dark red blood, no pulse Primary site for venipuncture
Capillaries Connecting arteries to veins Microscopic, one-cell-thick walls, gas exchange site Site for capillary/dermal puncture
Vessel Wall Layers (Tunica)
Layer Position Function
Tunica intima Inner layer Smooth endothelial lining; contact with blood; initiates clotting cascade when damaged
- Tunica media Middle layer Smooth muscle and elastic tissue; controls vessel diameter
- Tunica adventitia Outer layer Connective tissue; provides structural support
Clinical Relevance: When a phlebotomist punctures a vein, the needle passes through all three layers. Damage to the tunica intima activates the clotting cascade, which is why hemostasis (stopping bleeding) begins at the puncture site.
Blood Composition
Blood makes up approximately 7-8% of total body weight (about 5 liters in an average adult).
- Plasma (55% of blood volume)
- Water (92%) — carrier for cells, nutrients, and waste
- Proteins (7%) — albumin (maintains osmotic pressure), globulins (antibodies), fibrinogen (clotting)
- Other solutes (1%) — electrolytes, nutrients, hormones, waste products, gases
- Formed Elements (45% of blood volume)
- Component Count Function Lifespan
- Red Blood Cells (RBCs / Erythrocytes) 4.5-5.5 million/mcL Oxygen transport via hemoglobin ~120 days
White Blood Cells (WBCs / Leukocytes) 4,500-11,000/mcL Immune defense — fight infection Hours to years (varies by type)
- Platelets (Thrombocytes) 150,000-400,000/mcL Hemostasis — blood clotting ~8-10 days
- Hematocrit
The hematocrit (Hct) is the percentage of whole blood volume occupied by red blood cells:
- Normal male: 42-52%
- Normal female: 37-47%
- Measured by centrifuging blood in a capillary tube (microhematocrit)
- After centrifugation: RBCs on bottom, buffy coat (WBCs + platelets) in middle, plasma on top
- White Blood Cell Differential
The WBC differential identifies the percentage of each type of white blood cell:
- WBC Type Normal % Primary Function
- Neutrophils 50-70% First responders to bacterial infections; most abundant WBC
- Lymphocytes 20-40% Immune response — T cells (cellular immunity) and B cells (antibodies)
- Monocytes 2-8% Phagocytosis; become macrophages in tissues
- Eosinophils 1-4% Allergic responses and parasitic infections
- Basophils 0.5-1% Release histamine and heparin; allergic reactions
Memory Aid: " N ever L et M onkeys E at B ananas" — Neutrophils, Lymphocytes, Monocytes, Eosinophils, Basophils (in order of normal percentage).
Hemostasis — The Clotting Process
Hemostasis is the body's process of stopping bleeding. It occurs in three stages:
- Stage 1: Vascular Spasm
- Damaged blood vessel constricts (narrows) to reduce blood flow
- Immediate but temporary response
- Stage 2: Platelet Plug Formation
- Platelets adhere to the damaged vessel wall (adhesion)
- Platelets aggregate (clump together) to form a temporary plug
- Platelets release chemicals that attract more platelets (positive feedback)
- Stage 3: Coagulation Cascade
- A complex series of enzymatic reactions involving clotting factors (numbered I-XIII)
- Extrinsic pathway: Initiated by tissue factor (damaged tissue) — measured by PT/INR
- Intrinsic pathway: Initiated by contact with collagen (exposed vessel wall) — measured by PTT/aPTT
- Both pathways converge at the common pathway: Factor X -> Prothrombin -> Thrombin -> Fibrinogen -> Fibrin
- Fibrin threads form a mesh that stabilizes the platelet plug into a permanent clot
- Anticoagulants and the Coagulation Cascade
- Anticoagulant Mechanism Found In
- EDTA Chelates calcium (Factor IV) Lavender/pink tubes
- Sodium citrate Chelates calcium (Factor IV) Light blue tubes
- Heparin Inhibits thrombin (Factor IIa) Green tubes
- Sodium fluoride/oxalate Oxalate chelates calcium; fluoride inhibits glycolysis Gray tubes
Key Concept: Calcium (Factor IV) is essential for the coagulation cascade. Anticoagulants like EDTA, citrate, and oxalate prevent clotting by binding (chelating) calcium , removing it from the reaction. Heparin works differently — it directly inhibits thrombin.