Study guide
1.1 Infection Control & Personal Protective Equipment (PPE)
CPT Certified Phlebotomy Technician Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction: CPT Phlebotomy Exam Overview
NHA CPT Exam Overview CPT Certification Process Anatomy & Physiology for Phlebotomists
2 Chapter 1: Safety & Compliance (26%)
1.1 Infection Control & Personal Protective Equipment (PPE) 1.2 OSHA Regulations & Workplace Safety
3 Chapter 2: Patient Preparation & Identification (20%)
2.1 Patient Identification & Communication 2.2 Patient Preparation & Positioning
4 Chapter 3: Venipuncture Procedures (Routine Blood Collections, 28%)
3.1 Venipuncture Equipment & Technique 3.2 Order of Draw 3.3 Difficult Draws & Complications
5 Chapter 4: Capillary Puncture (Routine Blood Collections) & Special Collections (12%)
4.1 Capillary (Dermal) Puncture Technique 4.2 Special Collection Procedures
6 Chapter 5: Specimen Handling & Processing (14%)
5.1 Specimen Labeling & Transport 5.2 Specimen Processing & Quality Assurance
1.1 Infection Control & Personal Protective Equipment (PPE)
Key Takeaways Explain This Topic AI
Standard precautions apply to ALL patients regardless of diagnosis or perceived risk — treat every specimen as potentially infectious
The single most effective method to prevent the spread of infection in healthcare is proper hand hygiene
Hand hygiene must be performed before and after every patient contact, after removing gloves, and after touching potentially contaminated surfaces
Alcohol-based hand rub (ABHR) is preferred for routine hand hygiene; use soap and water when hands are visibly soiled, before eating, after using the restroom, and during C. difficile or norovirus outbreaks
Gloves must be changed between every patient — never reuse or wash disposable gloves
The chain of infection has six links: infectious agent, reservoir, portal of exit, mode of transmission, portal of entry, and susceptible host
Sharps must be disposed of immediately in a puncture-resistant, leak-proof, labeled sharps container at the point of use
Biohazard waste includes blood-soaked materials, used lancets, contaminated PPE, and any items saturated with blood or body fluids
Last updated: October 2026
Infection Control & Personal Protective Equipment
Infection control is the cornerstone of phlebotomy practice. As a phlebotomist, you handle blood and body fluids daily, placing you at direct risk for exposure to bloodborne pathogens. Strict adherence to infection control protocols protects both you and your patients.
Standard Precautions
Standard precautions (formerly called universal precautions) are the minimum infection prevention practices that apply to all patient care , regardless of suspected or confirmed infection status. The core principle: treat ALL blood and body fluids as potentially infectious .
Standard precautions include:
- Hand hygiene before and after every patient contact
- PPE use (gloves, gowns, masks, face shields) based on anticipated exposure
- Safe injection and sharps practices — never recap needles, dispose at point of use
- Respiratory hygiene / cough etiquette — masks for patients with respiratory symptoms
- Environmental cleaning — disinfect work surfaces between patients
- Safe handling of contaminated equipment and linens
- Hand Hygiene
Hand hygiene is the single most effective measure to prevent healthcare-associated infections. The CDC and WHO recommend hand hygiene in the following situations (the "5 Moments"):
- Moment When Method
- Before patient contact Before touching the patient ABHR or soap & water
- Before aseptic procedure Before venipuncture or capillary puncture ABHR or soap & water
After body fluid exposure After handling blood specimens, removing gloves ABHR, or soap and water if hands are visibly soiled
- After patient contact After touching the patient or their surroundings ABHR or soap & water
- After touching patient surroundings After touching bed rails, IV poles, etc. ABHR or soap & water
- Alcohol-Based Hand Rub (ABHR) vs. Soap and Water
- Method When to Use Duration
- ABHR (60-95% alcohol) Routine hand hygiene; hands NOT visibly soiled 20-30 seconds; rub until dry
Soap and Water Hands visibly soiled, before eating, after using the restroom, and caring for patients during C. difficile or norovirus outbreaks 40-60 seconds minimum; friction is key
Personal Protective Equipment (PPE)
PPE creates a barrier between the healthcare worker and infectious materials. Selection depends on the anticipated exposure:
PPE Item When Required Key Points
Gloves ALL blood collection procedures Change between patients; inspect for tears; non-sterile exam gloves are acceptable for routine phlebotomy
Gowns When splashing or spraying of blood is possible Fluid-resistant; cover arms and torso; remove after procedure
Masks When within 6 feet of a patient with respiratory symptoms; during procedures that may generate splashes Standard surgical mask for droplet precautions
Face shields / Goggles When splashing of blood to the face is anticipated Protect eyes, nose, and mouth from splash exposure
N95 Respirator When entering the room of a patient on airborne precautions (TB, measles, varicella) Must be fit-tested annually; provides higher filtration than surgical masks
- PPE Donning (Putting On) Order
- Gown first
- Mask or respirator
- Eye protection (goggles or face shield)
- Gloves last (over gown cuffs)
- PPE Doffing (Removing) Order
- Gloves first (most contaminated)
- Eye protection
- Gown
- Mask or respirator last
- Perform hand hygiene immediately
- The Chain of Infection
Understanding the chain of infection helps phlebotomists identify where to break the cycle:
- Link Description Phlebotomy Example
- Infectious Agent The pathogen (bacteria, virus, fungus) Hepatitis B, Hepatitis C, HIV
- Reservoir Where the pathogen lives and multiplies Infected patient's blood
- Portal of Exit How the pathogen leaves the reservoir Through the venipuncture site, blood specimen
- Mode of Transmission How the pathogen travels to a new host Needlestick injury, splash to mucous membranes
- Portal of Entry How the pathogen enters a new host Through a break in the phlebotomist's skin
- Susceptible Host A person at risk for infection An unvaccinated or immunocompromised healthcare worker
Breaking the chain: Standard precautions, PPE, hand hygiene, and sharps safety target the mode of transmission and portal of entry links to prevent infection.
Sharps Safety
Sharps injuries (needlesticks and cuts from contaminated sharps) are one of the most significant occupational hazards for phlebotomists.
- Key Sharps Safety Rules
- NEVER recap needles — recapping is a leading cause of needlestick injuries
Use safety-engineered devices — needles with retractable or shielding mechanisms (required by the Needlestick Safety and Prevention Act)
Dispose of sharps immediately at the point of use into a puncture-resistant, leak-proof, color-coded (red) or labeled sharps container
- Never overfill sharps containers — replace when 2/3 to 3/4 full
- Never reach into a sharps container to retrieve or push down contents
- Report all needlestick injuries immediately — even minor ones require documentation and follow-up
- Biohazard Waste Disposal
Proper disposal of biohazardous waste protects healthcare workers, patients, and the environment:
Categories of Biohazard Waste
Category Examples Disposal Method
Sharps waste Needles, lancets, broken glass contaminated with blood Puncture-resistant sharps container (red or labeled)
Regulated medical waste Blood-soaked gauze, contaminated PPE, blood tubes Red biohazard bag
Liquid waste Blood specimens, body fluid samples Pour down laboratory drain with running water (per facility policy) or autoclave
- Pathological waste Tissue specimens, organs Special incineration or treatment
- Biohazard Symbol Requirements
The universal biohazard symbol (three-lobed design) must be displayed on:
- Sharps containers
- Biohazard waste bags and containers
- Refrigerators and freezers storing blood or infectious materials
- Doors to laboratories and specimen storage areas
- Transport containers for specimens
- Spill Cleanup Protocol
- Notify others in the area of the spill
- Don PPE — gloves, gown, eye protection if splashing risk
- Contain the spill with absorbent material (paper towels, spill pads)
- Disinfect with an EPA-registered tuberculocidal disinfectant or 10% bleach solution (1:10 dilution)
- Allow contact time — most disinfectants require 10-30 minutes of wet contact
- Clean up the absorbent material and dispose in a biohazard bag
- Remove PPE and perform hand hygiene
- Document the incident per facility policy
- Transmission-Based Precautions
In addition to standard precautions, some patients require transmission-based precautions based on the route of pathogen spread:
- Type Route Examples PPE Required
- Contact precautions Direct or indirect contact MRSA, VRE, C. difficile, scabies Gloves + gown for all contact
Droplet precautions Large respiratory droplets (>5 microns) Influenza, pertussis, meningococcal disease Surgical mask within 6 feet
Airborne precautions Small particles that remain airborne (<5 microns) Tuberculosis (TB), measles, varicella (chickenpox) N95 respirator (fit-tested) + negative pressure room
- Phlebotomy in Isolation Rooms
- Check isolation signage before entering the room
- Don appropriate PPE before entry (as specified by the precaution type)
- Bring only the supplies you need — leave extra supplies outside
- Do NOT bring the phlebotomy cart into an isolation room
- Remove PPE properly before leaving (doffing order)
- Perform hand hygiene immediately after removing PPE