Study guide

1.2 OSHA Regulations & Workplace Safety

CPT Certified Phlebotomy Technician Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction: CPT Phlebotomy Exam Overview

NHA CPT Exam Overview CPT Certification Process Anatomy & Physiology for Phlebotomists

2 Chapter 1: Safety & Compliance (26%)

1.1 Infection Control & Personal Protective Equipment (PPE) 1.2 OSHA Regulations & Workplace Safety

3 Chapter 2: Patient Preparation & Identification (20%)

2.1 Patient Identification & Communication 2.2 Patient Preparation & Positioning

4 Chapter 3: Venipuncture Procedures (Routine Blood Collections, 28%)

3.1 Venipuncture Equipment & Technique 3.2 Order of Draw 3.3 Difficult Draws & Complications

5 Chapter 4: Capillary Puncture (Routine Blood Collections) & Special Collections (12%)

4.1 Capillary (Dermal) Puncture Technique 4.2 Special Collection Procedures

6 Chapter 5: Specimen Handling & Processing (14%)

5.1 Specimen Labeling & Transport 5.2 Specimen Processing & Quality Assurance

1.2 OSHA Regulations & Workplace Safety

Key Takeaways Explain This Topic AI

OSHA's Bloodborne Pathogens Standard (29 CFR 1910.1030) is the primary federal regulation protecting phlebotomists from occupational exposure

The Needlestick Safety and Prevention Act (2000) requires employers to provide safety-engineered sharp devices and maintain a sharps injury log

Employers must offer the Hepatitis B vaccine series free of charge to all employees with occupational exposure to blood within 10 working days of assignment

An Exposure Control Plan (ECP) must be reviewed and updated at least annually and be accessible to all employees

Safety Data Sheets (SDS) must be available for every hazardous chemical in the workplace and are organized in a standardized 16-section format

Post-exposure prophylaxis (PEP) for HIV exposure should start as soon as possible — CDC says within hours of exposure, and no later than 72 hours

OSHA requires employers to provide training on bloodborne pathogens at the time of hire and at least annually thereafter

The biohazard symbol is universal and must be displayed on containers, bags, and refrigerators storing blood or infectious materials

Last updated: October 2026

The Occupational Safety and Health Administration (OSHA) establishes and enforces workplace safety regulations that directly impact phlebotomy practice. Understanding these regulations is essential for exam success and daily practice.

OSHA Bloodborne Pathogens Standard (29 CFR 1910.1030)

This is the most important regulation for phlebotomists. It establishes requirements to protect workers from occupational exposure to blood and other potentially infectious materials (OPIM).

Key Requirements

Requirement Details

Exposure Control Plan (ECP) Written plan identifying at-risk employees, exposure prevention methods, and post-exposure procedures; must be reviewed/updated annually

  • Engineering Controls Safety-engineered needles, retractable lancets, needleless systems, sharps containers
  • Work Practice Controls No recapping needles, hand hygiene, no eating/drinking/smoking in work areas
  • PPE Employer must provide appropriate PPE at no cost to the employee
  • Hepatitis B Vaccination Must be offered free of charge within 10 working days of initial assignment
  • Training Bloodborne pathogens training at hire and annually thereafter

Post-Exposure Follow-Up Medical evaluation, testing, counseling, and documentation following any exposure incident

  • Recordkeeping Sharps injury log, training records, medical records maintained per OSHA requirements
  • The Needlestick Safety and Prevention Act (2000)

This federal law amended the Bloodborne Pathogens Standard to require:

Safety-engineered sharp devices (needles with built-in safety features — retractable, shielding, or self-blunting)

Sharps injury log — documenting the type and brand of device, department/work area, and description of the incident

  • Employee input — frontline workers must be involved in evaluating and selecting safety devices
  • Annual review of safety device technology
  • Exposure Control Plan (ECP)

Every healthcare facility must have a written Exposure Control Plan that includes:

  • Exposure determination — identifying job classifications and tasks with occupational exposure risk
  • Schedule and methods of implementation (engineering controls, work practices, PPE)
  • Hepatitis B vaccination program details
  • Post-exposure evaluation and follow-up procedures
  • Communication of hazards — labels, signs, color coding (biohazard symbol)
  • Recordkeeping procedures

The ECP must be accessible to all employees and reviewed/updated at least annually or whenever new tasks or procedures create new exposure risks.

Hepatitis B Vaccination

OSHA requires employers to offer the Hepatitis B vaccine series to all employees with occupational exposure to blood:

  • Offered free of charge within 10 working days of initial assignment
  • 3-dose series (0, 1 month, 6 months)
  • Employees may decline the vaccine but must sign a declination form
  • Declined employees may accept the vaccine at any time in the future at no cost
  • Post-vaccination titer testing is recommended to confirm immunity (anti-HBs level ≥10 mIU/mL)
  • Post-Exposure Protocol (Needlestick / Blood Splash)

If a phlebotomist experiences a needlestick or exposure to blood/body fluids:

  • Immediately wash the affected area with soap and water (for mucous membrane exposure, flush with water)
  • Report the incident to your supervisor immediately
  • Document the exposure details — time, type of device, circumstances
  • Identify the source patient — test for HBV, HCV, and HIV (with consent)
  • Seek medical evaluation — baseline blood draw for the exposed worker

Post-exposure prophylaxis (PEP):

  • HIV PEP: Must begin as soon as possible, within hours of exposure (CDC), and no later than 72 hours
  • HBV: HBIG (Hepatitis B Immune Globulin) may be administered if the exposed worker is unvaccinated
  • HCV: No PEP available; monitoring and early treatment if seroconversion occurs
  • Follow-up testing at 6 weeks, 3 months, and 6 months
  • Chemical Safety — Safety Data Sheets (SDS)

Phlebotomists may encounter hazardous chemicals in the laboratory, including:

  • Isopropyl alcohol, bleach, formaldehyde, methanol, reagents
  • SDS Requirements
  • An SDS (formerly MSDS) must be available for every hazardous chemical in the workplace
  • SDS documents follow a standardized 16-section format (per GHS — Globally Harmonized System)
  • Must be readily accessible to employees during their shift

Key sections include: hazard identification, first-aid measures, handling/storage, exposure controls, and toxicological information

Fire Safety (RACE and PASS)

Phlebotomists must know fire safety protocols:

RACE — Response to Fire

  • Letter Action
  • R Rescue — Remove patients from immediate danger
  • A Alarm — Pull the fire alarm and call the fire department
  • C Contain — Close doors and windows to contain the fire
  • E Extinguish — Use a fire extinguisher if safe to do so
  • PASS — Using a Fire Extinguisher
  • Letter Action
  • P Pull the pin
  • A Aim at the base of the fire
  • S Squeeze the handle
  • S Sweep from side to side
  • Bloodborne Pathogens — Key Facts

Phlebotomists must understand the bloodborne pathogens they are most at risk for:

Hepatitis B Virus (HBV)

  • Feature Details
  • Transmission Blood and body fluids; can survive on surfaces for up to 7 days
  • Risk per needlestick 6-30% (highest risk of the three major bloodborne pathogens)
  • Vaccine Available — 3-dose series; highly effective
  • Prevention Vaccination + standard precautions
  • Post-exposure HBIG + vaccine if unvaccinated
  • Hepatitis C Virus (HCV)
  • Feature Details
  • Transmission Blood-to-blood contact (most efficiently transmitted through needlestick)
  • Risk per needlestick 1.8% (lower than HBV, higher than HIV)
  • Vaccine No vaccine available
  • Prevention Standard precautions only
  • Post-exposure No PEP available; monitoring for seroconversion; early treatment with antivirals if infected
  • Human Immunodeficiency Virus (HIV)
  • Feature Details
  • Transmission Blood and body fluids; fragile virus — does NOT survive well outside the body
  • Risk per needlestick 0.3% (lowest risk per exposure)
  • Vaccine No vaccine available
  • Prevention Standard precautions

Post-exposure PEP (antiretroviral medications) — start as soon as possible, within hours of exposure, and no later than 72 hours

Risk Comparison

Key Fact: HBV has the highest transmission risk per needlestick (6-30%), but it is also the only one with an effective vaccine. HCV has the highest prevalence among healthcare-associated bloodborne infections. HIV has the lowest transmission risk per needlestick (0.3%).

Regulatory Agencies Overview

  • Agency Role in Phlebotomy
  • OSHA Workplace safety; Bloodborne Pathogens Standard; ECP requirements
  • CDC Infection control guidelines; hand hygiene recommendations; vaccination schedules

CLSI Laboratory standards including order of draw (PRE02, 8th edition 2025, formerly GP41), specimen handling, and quality

The Joint Commission (TJC) Accreditation; two patient identifiers and labeling in the patient's presence (National Performance Goals for hospitals since January 2026; National Patient Safety Goals for other programs such as ambulatory care)

  • CMS Medicare/Medicaid regulations; CLIA (Clinical Laboratory Improvement Amendments) for lab quality
  • CAP College of American Pathologists — laboratory accreditation and proficiency testing
  • FDA Regulates blood collection devices, tubes, and reagents as medical devices