Study guide

17.1 Enthalpy Changes, Calorimetry, Hess's Law & Born-Haber Cycle

Pakistan ECAT Engineering Colleges Admission Test

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: ECAT Exam Structure, Scoring & Strategy

1.1 ECAT Exam Pattern, Scoring Scheme & UET Merit Aggregate 1.2 Time Management, Pacing & MCQ Problem-Solving Tactics

2 Chapter 2: Mathematics — Number Systems, Sets & Algebra

2.1 Real Numbers, Sets, Logic, Binary Operations & Groups 2.2 Complex Numbers, Modulus, Conjugates & De Moivre's Theorem 2.3 Matrices, Determinants, Inverses & Systems of Linear Equations 2.4 Quadratic Equations, Relations Between Roots & Factor/Remainder Theorems

3 Chapter 3: Mathematics — Sequences, Series & Combinatorics

3.1 Arithmetic, Geometric & Harmonic Progressions (AP, GP, HP) 3.2 Permutations, Combinations & Probability Distributions 3.3 Mathematical Induction & the Binomial Theorem

4 Chapter 4: Mathematics — Trigonometry & Trigonometric Equations

4.1 Fundamental Trigonometric Identities & Angle Addition Formulas 4.2 Graphs of Trigonometric Functions & Inverse Trigonometric Functions 4.3 Solutions of Triangles (Sine/Cosine Laws) & Trigonometric Equations

5 Chapter 5: Mathematics — Functions, Limits & Continuity

5.1 Real-Valued Functions, Types, Domains & Ranges 5.2 Limits of Functions, Indeterminate Forms & Squeeze Theorem 5.3 Continuity, Types of Discontinuity & Asymptotes

6 Chapter 6: Mathematics — Differential Calculus

6.1 Definition of Derivative, Power, Product, Quotient & Chain Rules 6.2 Derivatives of Trigonometric, Exponential & Logarithmic Functions 6.3 Implicit Differentiation, Parametric Equations & Higher-Order Derivatives 6.4 Tangents, Normals, Increasing/Decreasing Functions & Extrema

7 Chapter 7: Mathematics — Integral Calculus

7.1 Indefinite Integration Formulas & Integration by Substitution 7.2 Integration by Parts & Partial Fractions 7.3 Definite Integrals, Properties & Fundamental Theorem of Calculus 7.4 Area Under Curves & First-Order Differential Equations

8 Chapter 8: Mathematics — Analytic Geometry, Linear Programming & Vectors

8.1 Coordinates, Slopes, Straight Line Equations & Distances 8.2 Linear Inequalities & Linear Programming 8.3 Circle Equations, Tangents, Normals & Intersections 8.4 Conic Sections: Parabola, Ellipse & Hyperbola Characteristics 8.5 Vectors in 2D and 3D, Dot Product, Cross Product & Scalar Triple Product

9 Chapter 9: Physics — Measurements, Vectors & Equilibrium

9.1 Physical Quantities, SI Units, Errors & Dimensional Analysis 9.2 Vector Addition, Components, Scalar & Vector Products in Physics 9.3 Equilibrium Conditions, Torque & Rotational Equilibrium

10 Chapter 10: Physics — Kinematics, Dynamics & Energy

10.1 Kinematics: Displacement, Velocity, Acceleration & Motion Equations 10.2 Newton's Laws of Motion, Momentum, Impulse & Elastic Collisions 10.3 Projectile Motion: Trajectory, Height, Flight Time & Range 10.4 Work, Energy, Work-Energy Theorem, Conservative Forces & Power

11 Chapter 11: Physics — Circular Motion, Gravitation, Fluids & Oscillations

11.1 Uniform Circular Motion, Centripetal Force & Moment of Inertia 11.2 Gravitation, Escape Velocity, Satellites & Weightlessness 11.3 Viscosity, Drag Force, Equation of Continuity & Bernoulli's Principle 11.4 Simple Harmonic Motion (SHM), Pendulum, Mass-Spring & Resonance

12 Chapter 12: Physics — Waves, Optics, Optical Instruments & Thermodynamics

12.1 Waves, Speed of Sound, Standing Waves & Doppler Effect 12.2 Wave Theory of Light, Interference & Young's Double-Slit Experiment 12.3 Diffraction Grating, Resolving Power & Polarization of Light 12.4 Optical Instruments: Magnifiers, Microscopes, Telescopes, Spectrometer & Fibre Optics 12.5 Kinetic Theory of Gases, First Law, Heat Engines & Carnot Cycle

13 Chapter 13: Physics — Electrostatics, Current Electricity & Electromagnetism

13.1 Coulomb's Law, Electric Fields, Gauss's Law & Capacitors 13.2 Electric Current, Resistance, Ohm's Law, Kirchhoff's Rules & Potentiometer 13.3 Magnetic Fields, Ampere's Law, Faraday's Law, Lenz's Law & Transformers

14 Chapter 14: Physics — Alternating Current, Physics of Solids & Electronics

14.1 Alternating Current: RMS Values, Reactance, Impedance, Resonance & Power 14.2 Physics of Solids: Elasticity, Band Theory, Superconductors & Magnetic Materials 14.3 Electronics: p-n Junction, Rectifiers, Transistors, Op-Amps & Logic Gates

15 Chapter 15: Physics — Modern, Atomic & Nuclear Physics

15.1 Special Relativity, Mass–Energy Equivalence, Pair Production & Annihilation 15.2 Photoelectric Effect, Photons, Atomic Spectra, X-Rays & Nuclear Reactions 15.3 Lasers, Nuclear Reactors, Radiation Detectors, Dosimetry & Elementary Particles

16 Chapter 16: Chemistry — Basic Concepts, Atomic Structure, Bonding & States of Matter

16.1 Mole Concept, Stoichiometry, Limiting Reactants, Isotopes & Experimental Techniques 16.2 Atomic Structure, Bohr's Model, Quantum Numbers & Electronic Configurations 16.3 Chemical Bonding: Ionic, Covalent & Coordinate Bonds, VSEPR, Hybridization & MOT 16.4 Gas Laws, Ideal Gas Equation, Kinetic Molecular Theory & Real Gases 16.5 Liquids, Intermolecular Forces, Hydrogen Bonding & Crystal Lattices

17 Chapter 17: Chemistry — Energetics, Equilibrium & Kinetics

17.1 Enthalpy Changes, Calorimetry, Hess's Law & Born-Haber Cycle 17.2 Reversible Reactions, Equilibrium Constants (Kc, Kp), Le Chatelier & Ksp 17.3 Solutions, Concentration Units, Colligative Properties & Raoult's Law 17.4 Reaction Rates, Rate Equations, Order of Reaction & Activation Energy

18 Chapter 18: Chemistry — Periodic Trends, s-, p- & d-Block Elements & Electrochemistry

18.1 Periodic Trends: Atomic Radii, Ionization Energies & Electronegativities 18.2 Chemistry of s-Block and p-Block Elements (Groups I, II, III, IV, VII) 18.3 Groups V-A & VI-A: Nitrogen, Phosphorus, Oxygen & Sulphur Compounds 18.4 Transition Elements: Electronic Configurations, Complexes & Colors 18.5 Oxidation Numbers, Electrochemical Cells, Standard Potentials & Batteries

19 Chapter 19: Chemistry — Organic Chemistry & Reaction Mechanisms

19.1 Organic Functional Groups, IUPAC Nomenclature & Structural/Stereoisomerism 19.2 Aliphatic Hydrocarbons: Alkanes, Alkenes, Alkynes & Addition Reactions 19.3 Benzene: Electronic Structure, Resonance Stability & Electrophilic Substitution 19.4 Alkyl Halides (SN1/SN2), Grignard Reagents & Functional-Group Tests 19.5 Alcohols, Phenols & Ethers: Preparation and Reactions 19.6 Aldehydes, Ketones, Carboxylic Acids, Acid Derivatives & Amino Acids

20 Chapter 20: Chemistry — Macromolecules, Chemical Industries & Environment

20.1 Macromolecules: Polymers, Carbohydrates, Proteins, Lipids, Enzymes & Nucleic Acids 20.2 Chemical Industries in Pakistan & Environmental Chemistry

21 Chapter 21: English — Reading Comprehension, Vocabulary & Grammar

21.1 Reading Comprehension Strategies, Main Ideas, Inferences & Tone 21.2 Academic Vocabulary, Context Clues, Synonyms & Antonyms 21.3 Subject-Verb Agreement, Tenses & Grammatical Concord 21.4 Sentence Correction, Parallelism, Modifiers & Prepositions

17.1 Enthalpy Changes, Calorimetry, Hess's Law & Born-Haber Cycle

Key Takeaways Explain This Topic AI

Thermodynamic systems interact with surroundings across boundaries, where state functions like enthalpy ( H H H ), internal energy ( U U U ), and entropy ( S S S ) depend solely on the initial and final states, yielding q p = Δ H = Δ U + P Δ V q_p = \Delta H = \Delta U + P\Delta V q p ​ = Δ H = Δ U + P Δ V at constant pressure.

Thermochemical reactions classify into exothermic ( Δ H < 0 \Delta H < 0 Δ H < 0 , heat released, products thermodynamically more stable) and endothermic ( Δ H > 0 \Delta H > 0 Δ H > 0 , heat absorbed), with standard enthalpy of formation Δ H f ∘ \Delta H_f^\circ Δ H f ∘ ​ defined as zero for pure elements in their standard reference states.

Neutralization of any strong monoprotic acid with a strong base in dilute aqueous solution releases an essentially constant enthalpy of Δ H n ∘ ≈ − 57.4 kJ/mol \Delta H_n^\circ \approx -57.4\text{ kJ/mol} Δ H n ∘ ​ ≈ − 57.4 kJ/mol ( − 13.7 kcal/mol -13.7\text{ kcal/mol} − 13.7 kcal/mol ), whereas weak acids or bases yield less negative values due to endothermic partial ionization.

Hess's Law of Constant Heat Summation states that the total enthalpy change is independent of the reaction pathway ( Δ H rxn ∘ = ∑ n Δ H f ∘ ( products ) − ∑ m Δ H f ∘ ( reactants ) \Delta H^\circ_{\text{rxn}} = \sum n\Delta H_f^\circ(\text{products}) - \sum m\Delta H_f^\circ(\text{reactants}) Δ H rxn ∘ ​ = ∑ n Δ H f ∘ ​ ( products ) − ∑ m Δ H f ∘ ​ ( reactants ) ), enabling indirect calculation of ionic lattice energies via the Born-Haber cycle.

Spontaneous physical and chemical transformations require a net decrease in Gibbs free energy ( Δ G = Δ H − T Δ S < 0 \Delta G = \Delta H - T\Delta S < 0 Δ G = Δ H − T Δ S < 0 ), where the balance between enthalpy and entropy dictates temperature-dependent spontaneity thresholds.

Last updated: October 2026

Enthalpy Changes, Calorimetry, Hess's Law & Born-Haber Cycle

In the Intermediate Chemistry Part I syllabus and the University of Engineering and Technology (UET) ECAT entry test, thermochemistry and chemical thermodynamics are foundational subjects. The ECAT Chemistry section places heavy emphasis on calculating standard enthalpy changes, interpreting potential energy profiles, utilizing calorimetry data to compute specific heat and heat capacities, and applying Hess's Law to thermochemical cycles such as the Born-Haber cycle for ionic crystals. Mastering the sign conventions, algebraic formulations, and spontaneity conditions under Gibbs free energy allows candidates to solve multi-step energetic problems rapidly without a calculator.

1. Thermodynamic Systems, Surroundings & State Functions

Thermodynamics examines the energy transformations accompanying physical changes and chemical reactions. To quantify these processes, classical thermodynamics divides the universe into two distinct parts:

System: The specific portion of the universe under physical or chemical investigation (e.g., reactants and products in a reaction vessel, a gas cylinder with a movable piston, or an aqueous electrolyte solution).

Surroundings: Everything in the universe outside the designated system that can interact with it by exchanging matter or energy (e.g., the solvent water, the container walls, the surrounding air, and measuring instruments).

Boundary: The real or imaginary physical envelope separating the system from its surroundings. Boundaries may be rigid or movable, conducting (diathermic) or insulating (adiabatic).

Systems are classified into three thermodynamic categories based on permeability:

Open System: Can exchange both matter and energy with its surroundings (e.g., boiling water in an open beaker where water vapor escapes and heat enters).

Closed System: Can exchange energy (heat and work) but cannot exchange matter with its surroundings (e.g., a sealed flask containing reacting gases immersed in a water bath).

Isolated System: Can exchange neither matter nor energy with its surroundings (e.g., hot liquid contained inside a perfectly insulated, sealed thermos flask; the physical universe as a whole).

State Functions vs. Path Functions

A state function (or state variable) is a macroscopic thermodynamic property whose numerical value depends exclusively on the present physical state of the system (determined by temperature T T T , pressure P P P , volume V V V , and composition) and is completely independent of the past history or the specific pathway taken to reach that state. If a system changes from State 1 to State 2, the net change in a state function X X X is simply:

Δ X = X final − X initial = X 2 − X 1 \Delta X = X_{\text{final}} - X_{\text{initial}} = X_2 - X_1 Δ X = X final ​ − X initial ​ = X 2 ​ − X 1 ​

Crucial state functions in chemical thermodynamics include:

Internal Energy ( U U U or E E E ): The total sum of all microscopic kinetic energies (translational, rotational, vibrational) and potential energies (intermolecular forces, electronic bonds, nuclear binding forces) of the constituent particles.

Enthalpy ( H H H ): Defined mathematically as the sum of internal energy and pressure-volume work potential: H = U + P V H = U + PV H = U + P V .

Entropy ( S S S ): The quantitative measure of microscopic molecular disorder or energy dispersion.

Gibbs Free Energy ( G G G ): The maximum thermodynamic energy available to do useful non-expansion work: G = H − T S G = H - TS G = H − TS .

In stark contrast, heat ( q q q ) and work ( w w w ) are path functions . Their values depend directly on the specific operational path or mechanism followed during the transformation. Heat and work represent energy in transit across a system boundary; neither heat nor work is a property possessed by a substance at rest.

The First Law of Thermodynamics in Thermochemistry

The First Law of Thermodynamics is the law of conservation of energy: energy can neither be created nor destroyed, although it may be converted from one form to another. Mathematically:

Δ U = q + w \Delta U = q + w Δ U = q + w

where Δ U \Delta U Δ U is the change in internal energy, q q q is heat absorbed by the system from the surroundings ( q > 0 q > 0 q > 0 for endothermic, q < 0 q < 0 q < 0 for exothermic), and w w w is work done on the system ( w = − P Δ V w = -P\Delta V w = − P Δ V when expansion work is done by the system against an opposing external pressure P P P ). Thus:

Δ U = q − P Δ V \Delta U = q - P\Delta V Δ U = q − P Δ V

Two critical operational constraints govern chemical reactions:

Constant Volume Processes ( V = constant ⟹ Δ V = 0 V = \text{constant} \implies \Delta V = 0 V = constant ⟹ Δ V = 0 ): Because no mechanical pressure-volume work can occur ( w = 0 w = 0 w = 0 ), the heat absorbed or evolved at constant volume ( q v q_v q v ​ ) is exactly equal to the change in internal energy: q v = Δ U q_v = \Delta U q v ​ = Δ U

Constant Pressure Processes ( P = constant P = \text{constant} P = constant ): Most bench chemistry and biological reactions occur in open vessels under constant atmospheric pressure ( P = 1 atm P = 1\text{ atm} P = 1 atm ). Rearranging the First Law yields: q p = Δ U + P Δ V q_p = \Delta U + P\Delta V q p ​ = Δ U + P Δ V Because H = U + P V H = U + PV H = U + P V , taking the differential at constant pressure gives Δ H = Δ U + P Δ V \Delta H = \Delta U + P\Delta V Δ H = Δ U + P Δ V . Therefore: q p = Δ H q_p = \Delta H q p ​ = Δ H The heat evolved or absorbed by a chemical system at constant atmospheric pressure is identically equal to its change in enthalpy ( Δ H \Delta H Δ H ).

For reactions involving ideal gases, P Δ V = Δ n g R T P\Delta V = \Delta n_g R T P Δ V = Δ n g ​ RT , where Δ n g = ∑ n gas ( products ) − ∑ n gas ( reactants ) \Delta n_g = \sum n_{\text{gas}}(\text{products}) - \sum n_{\text{gas}}(\text{reactants}) Δ n g ​ = ∑ n gas ​ ( products ) − ∑ n gas ​ ( reactants ) . Hence:

Δ H = Δ U + Δ n g R T \Delta H = \Delta U + \Delta n_g R T Δ H = Δ U + Δ n g ​ RT

If Δ n g = 0 \Delta n_g = 0 Δ n g ​ = 0 (e.g., H 2 ( g ) + Cl 2 ( g ) → 2 HCl ( g ) \text{H}_2(g) + \text{Cl}_2(g) \rightarrow 2\text{HCl}(g) H 2 ​ ( g ) + Cl 2 ​ ( g ) → 2 HCl ( g ) ), then P Δ V = 0 P\Delta V = 0 P Δ V = 0 and Δ H = Δ U \Delta H = \Delta U Δ H = Δ U .

If Δ n g > 0 \Delta n_g > 0 Δ n g ​ > 0 (gas-producing reactions), work is done by the system against the atmosphere, so Δ H > Δ U \Delta H > \Delta U Δ H > Δ U .

If Δ n g < 0 \Delta n_g < 0 Δ n g ​ < 0 (gas-consuming reactions), work is done on the system by the atmosphere, so Δ H < Δ U \Delta H < \Delta U Δ H < Δ U .

2. Exothermic vs. Endothermic Reactions & Potential Energy Profiles

Every chemical reaction involves the simultaneous breaking of chemical bonds in reactant molecules (which always requires energy input, an endothermic process) and the formation of new chemical bonds in product molecules (which always releases energy, an exothermic process). The net enthalpy change Δ H = H products − H reactants \Delta H = H_{\text{products}} - H_{\text{reactants}} Δ H = H products ​ − H reactants ​ reflects the energy difference between these complementary events:

Exothermic Reactions ( Δ H < 0 \Delta H < 0 Δ H < 0 ):

Energy released during product bond formation exceeds energy consumed in reactant bond cleavage.

Heat is evolved to the surroundings, causing the temperature of the reaction mixture and container to rise ( Δ T > 0 \Delta T > 0 Δ T > 0 ).

The total enthalpy of the products is strictly less than the total enthalpy of the reactants ( H products < H reactants H_{\text{products}} < H_{\text{reactants}} H products ​ < H reactants ​ ).

Products reside at a lower potential energy minimum, making them thermodynamically more stable than the reactants.

Examples: Combustion of hydrocarbons ( CH 4 + 2 O 2 → CO 2 + 2 H 2 O \text{CH}_4 + 2\text{O}_2 \rightarrow \text{CO}_2 + 2\text{H}_2\text{O} CH 4 ​ + 2 O 2 ​ → CO 2 ​ + 2 H 2 ​ O , Δ H = − 890.4 kJ/mol \Delta H = -890.4\text{ kJ/mol} Δ H = − 890.4 kJ/mol ), acid-base neutralizations, respiration, synthesis of ammonia via the Haber process.

Endothermic Reactions ( Δ H > 0 \Delta H > 0 Δ H > 0 ):

Energy required to break reactant bonds exceeds energy liberated when product bonds form.

Heat is absorbed from the surroundings, resulting in a temperature decrease of the surrounding medium unless external heating is applied ( Δ T < 0 \Delta T < 0 Δ T < 0 ).

The total enthalpy of the products is strictly greater than the total enthalpy of the reactants ( H products > H reactants H_{\text{products}} > H_{\text{reactants}} H products ​ > H reactants ​ ).

Products reside at a higher potential energy level and are thermodynamically less stable than reactants.

Examples: Thermal decomposition of limestone ( CaCO 3 ( s ) → CaO ( s ) + CO 2 ( g ) \text{CaCO}_3(s) \rightarrow \text{CaO}(s) + \text{CO}_2(g) CaCO 3 ​ ( s ) → CaO ( s ) + CO 2 ​ ( g ) , Δ H = + 178 kJ/mol \Delta H = +178\text{ kJ/mol} Δ H = + 178 kJ/mol ), photosynthesis, thermal cracking of alkanes, formation of nitric oxide from air ( N 2 + O 2 → 2 NO \text{N}_2 + \text{O}_2 \rightarrow 2\text{NO} N 2 ​ + O 2 ​ → 2 NO , Δ H = + 180 kJ/mol \Delta H = +180\text{ kJ/mol} Δ H = + 180 kJ/mol ).

Potential Energy Reaction Profiles

In both exothermic and endothermic reactions, reactants must acquire a minimum kinetic energy barrier, the activation energy ( E a E_a E a ​ ) , to reach the high-energy, unstable transitional arrangement known as the activated complex or transition state :

In an exothermic profile , the reactants begin at an elevated baseline H R H_R H R ​ , ascend an energy hill of height E a , forward E_{a,\text{forward}} E a , forward ​ , and descend past the activated complex to a lower baseline H P H_P H P ​ . The net enthalpy release is Δ H = H P − H R = E a , forward − E a , reverse < 0 \Delta H = H_P - H_R = E_{a,\text{forward}} - E_{a,\text{reverse}} < 0 Δ H = H P ​ − H R ​ = E a , forward ​ − E a , reverse ​ < 0 .

In an endothermic profile , the reactants begin at a lower baseline H R H_R H R ​ , ascend an energy hill E a , forward E_{a,\text{forward}} E a , forward ​ , and settle at an elevated product plateau H P H_P H P ​ . Here, E a , forward > E a , reverse E_{a,\text{forward}} > E_{a,\text{reverse}} E a , forward ​ > E a , reverse ​ , yielding Δ H = H P − H R > 0 \Delta H = H_P - H_R > 0 Δ H = H P ​ − H R ​ > 0 .

3. Standard Enthalpy Changes Defined & Quantified

Thermochemical measurements depend on temperature, pressure, and the physical states of reactants and products. To establish universal tables of thermodynamic constants, IUPAC specifies standard thermodynamic states:

Standard Temperature: Exactly 298.15 K 298.15\text{ K} 298.15 K ( 25 ∘ C 25^\circ\text{C} 2 5 ∘ C ).

Standard Pressure: 1 atm 1\text{ atm} 1 atm ( 101.325 kPa 101.325\text{ kPa} 101.325 kPa ) in most Intermediate textbooks; IUPAC now recommends 1 bar 1\text{ bar} 1 bar ( 100 kPa 100\text{ kPa} 100 kPa ), a difference too small to change typical answers.

Standard State of a Substance: The most stable, pure physical state (solid, liquid, or gas) of the pure substance under standard conditions ( 298 K , 1 atm 298\text{ K}, 1\text{ atm} 298 K , 1 atm ).

Standard Concentration: Exactly 1.0 mol ⋅ dm − 3 1.0\text{ mol}\cdot\text{dm}^{-3} 1.0 mol ⋅ dm − 3 ( 1.0 M 1.0\text{ M} 1.0 M ) for dissolved aqueous solutes.

Standard enthalpy changes carry the degree superscript symbol Δ H ∘ \Delta H^\circ Δ H ∘ .

Standard Enthalpy of Formation ( Δ H f ∘ \Delta H_f^\circ Δ H f ∘ ​ )

The standard enthalpy of formation ( Δ H f ∘ \Delta H_f^\circ Δ H f ∘ ​ ) is the enthalpy change that occurs when exactly one mole of a pure compound is synthesized directly from its constituent chemical elements in their standard reference physical states at 298 K 298\text{ K} 298 K and 1 atm 1\text{ atm} 1 atm :

C ( graphite ) + O 2 ( g ) → CO 2 ( g ) Δ H f ∘ = − 393.5 kJ/mol \text{C}(\text{graphite}) + \text{O}_2(g) \rightarrow \text{CO}_2(g) \quad \Delta H_f^\circ = -393.5\text{ kJ/mol} C ( graphite ) + O 2 ​ ( g ) → CO 2 ​ ( g ) Δ H f ∘ ​ = − 393.5 kJ/mol

H 2 ( g ) + 1 2 O 2 ( g ) → H 2 O ( l ) Δ H f ∘ = − 285.8 kJ/mol \text{H}_2(g) + \frac{1}{2}\text{O}_2(g) \rightarrow \text{H}_2\text{O}(l) \quad \Delta H_f^\circ = -285.8\text{ kJ/mol} H 2 ​ ( g ) + 2 1 ​ O 2 ​ ( g ) → H 2 ​ O ( l ) Δ H f ∘ ​ = − 285.8 kJ/mol

ECAT Axiom: By universal thermodynamic convention, the standard enthalpy of formation of every pure chemical element in its standard reference state is assigned a value of identically zero : Δ H f ∘ [ O 2 ( g ) ] = Δ H f ∘ [ N 2 ( g ) ] = Δ H f ∘ [ H 2 ( g ) ] = Δ H f ∘ [ C graphite ] = Δ H f ∘ [ Na ( s ) ] = Δ H f ∘ [ Br 2 ( l ) ] = 0 \Delta H_f^\circ[\text{O}_2(g)] = \Delta H_f^\circ[\text{N}_2(g)] = \Delta H_f^\circ[\text{H}_2(g)] = \Delta H_f^\circ[\text{C}_{\text{graphite}}] = \Delta H_f^\circ[\text{Na}(s)] = \Delta H_f^\circ[\text{Br}_2(l)] = 0 Δ H f ∘ ​ [ O 2 ​ ( g )] = Δ H f ∘ ​ [ N 2 ​ ( g )] = Δ H f ∘ ​ [ H 2 ​ ( g )] = Δ H f ∘ ​ [ C graphite ​ ] = Δ H f ∘ ​ [ Na ( s )] = Δ H f ∘ ​ [ Br 2 ​ ( l )] = 0 However, allotropes or states other than the reference state have non-zero enthalpies of formation. For example, Δ H f ∘ [ C diamond ] = + 1.9 kJ/mol \Delta H_f^\circ[\text{C}_{\text{diamond}}] = +1.9\text{ kJ/mol} Δ H f ∘ ​ [ C diamond ​ ] = + 1.9 kJ/mol , Δ H f ∘ [ O 3 ( g ) ] = + 142.7 kJ/mol \Delta H_f^\circ[\text{O}_3(g)] = +142.7\text{ kJ/mol} Δ H f ∘ ​ [ O 3 ​ ( g )] = + 142.7 kJ/mol , and Δ H f ∘ [ Br 2 ( g ) ] = + 30.9 kJ/mol \Delta H_f^\circ[\text{Br}_2(g)] = +30.9\text{ kJ/mol} Δ H f ∘ ​ [ Br 2 ​ ( g )] = + 30.9 kJ/mol .

Standard Enthalpy of Combustion ( Δ H c ∘ \Delta H_c^\circ Δ H c ∘ ​ )

The standard enthalpy of combustion ( Δ H c ∘ \Delta H_c^\circ Δ H c ∘ ​ ) is the enthalpy change accompanying the complete combustion of exactly one mole of a substance in an excess of pure oxygen gas under standard conditions ( 298 K , 1 atm 298\text{ K}, 1\text{ atm} 298 K , 1 atm ):

CH 4 ( g ) + 2 O 2 ( g ) → CO 2 ( g ) + 2 H 2 O ( l ) Δ H c ∘ = − 890.4 kJ/mol \text{CH}_4(g) + 2\text{O}_2(g) \rightarrow \text{CO}_2(g) + 2\text{H}_2\text{O}(l) \quad \Delta H_c^\circ = -890.4\text{ kJ/mol} CH 4 ​ ( g ) + 2 O 2 ​ ( g ) → CO 2 ​ ( g ) + 2 H 2 ​ O ( l ) Δ H c ∘ ​ = − 890.4 kJ/mol

C 2 H 5 OH ( l ) + 3 O 2 ( g ) → 2 CO 2 ( g ) + 3 H 2 O ( l ) Δ H c ∘ = − 1367 kJ/mol \text{C}_2\text{H}_5\text{OH}(l) + 3\text{O}_2(g) \rightarrow 2\text{CO}_2(g) + 3\text{H}_2\text{O}(l) \quad \Delta H_c^\circ = -1367\text{ kJ/mol} C 2 ​ H 5 ​ OH ( l ) + 3 O 2 ​ ( g ) → 2 CO 2 ​ ( g ) + 3 H 2 ​ O ( l ) Δ H c ∘ ​ = − 1367 kJ/mol

Because combustion reactions invariably release heat, Δ H c ∘ \Delta H_c^\circ Δ H c ∘ ​ is always negative (exothermic).

Standard Enthalpy of Atomization ( Δ H at ∘ \Delta H_{\text{at}}^\circ Δ H at ∘ ​ )

The standard enthalpy of atomization ( Δ H at ∘ \Delta H_{\text{at}}^\circ Δ H at ∘ ​ ) is the enthalpy change required to dissociate an element or compound into exactly one mole of separated, gaseous atoms from its standard state:

1 2 Cl 2 ( g ) → Cl ( g ) Δ H at ∘ = + 121 kJ/mol \frac{1}{2}\text{Cl}_2(g) \rightarrow \text{Cl}(g) \quad \Delta H_{\text{at}}^\circ = +121\text{ kJ/mol} 2 1 ​ Cl 2 ​ ( g ) → Cl ( g ) Δ H at ∘ ​ = + 121 kJ/mol

Na ( s ) → Na ( g ) Δ H at ∘ = + 108 kJ/mol \text{Na}(s) \rightarrow \text{Na}(g) \quad \Delta H_{\text{at}}^\circ = +108\text{ kJ/mol} Na ( s ) → Na ( g ) Δ H at ∘ ​ = + 108 kJ/mol

Atomization invariably requires breaking metallic, covalent, or van der Waals interactions; thus, Δ H at ∘ \Delta H_{\text{at}}^\circ Δ H at ∘ ​ is always positive (endothermic).

Standard Enthalpy of Neutralization ( Δ H n ∘ \Delta H_n^\circ Δ H n ∘ ​ )

The standard enthalpy of neutralization ( Δ H n ∘ \Delta H_n^\circ Δ H n ∘ ​ ) is the enthalpy change when one mole of water ( H 2 O \text{H}_2\text{O} H 2 ​ O ) is produced by the neutralization reaction between an acid and a base under standard aqueous conditions:

H + ( a q ) + OH − ( a q ) → H 2 O ( l ) Δ H n ∘ ≈ − 57.4 kJ/mol ( − 13.7 kcal/mol ) \text{H}^+(aq) + \text{OH}^-(aq) \rightarrow \text{H}_2\text{O}(l) \quad \Delta H_n^\circ \approx -57.4\text{ kJ/mol} \quad (-13.7\text{ kcal/mol}) H + ( a q ) + OH − ( a q ) → H 2 ​ O ( l ) Δ H n ∘ ​ ≈ − 57.4 kJ/mol ( − 13.7 kcal/mol )

Strong Acid + Strong Base: Strong mineral acids ( HCl , HNO 3 , HClO 4 \text{HCl}, \text{HNO}_3, \text{HClO}_4 HCl , HNO 3 ​ , HClO 4 ​ ) and strong alkali hydroxides ( NaOH , KOH \text{NaOH}, \text{KOH} NaOH , KOH ) are completely (100%) ionized in dilute aqueous solutions. Consequently, the spectator ions ( Na + , K + , Cl − , NO 3 − \text{Na}^+, \text{K}^+, \text{Cl}^-, \text{NO}_3^- Na + , K + , Cl − , NO 3 − ​ ) play no role, and the net ionic reaction is universally H + ( a q ) + OH − ( a q ) → H 2 O ( l ) \text{H}^+(aq) + \text{OH}^-(aq) \rightarrow \text{H}_2\text{O}(l) H + ( a q ) + OH − ( a q ) → H 2 ​ O ( l ) . For all such pairs, Δ H n ∘ \Delta H_n^\circ Δ H n ∘ ​ remains constant at approximately − 57.4 kJ/mol -57.4\text{ kJ/mol} − 57.4 kJ/mol .

Weak Acid or Weak Base Neutralization: When a weak acid (e.g., acetic acid, CH 3 COOH \text{CH}_3\text{COOH} CH 3 ​ COOH ; hydrocyanic acid, HCN \text{HCN} HCN ) or a weak base (e.g., ammonium hydroxide, NH 4 OH \text{NH}_4\text{OH} NH 4 ​ OH ) is neutralized, the measured enthalpy release is noticeably less negative (e.g., − 55.2 kJ/mol -55.2\text{ kJ/mol} − 55.2 kJ/mol for CH 3 COOH + NaOH \text{CH}_3\text{COOH} + \text{NaOH} CH 3 ​ COOH + NaOH and only − 12.1 kJ/mol -12.1\text{ kJ/mol} − 12.1 kJ/mol for HCN + NaOH \text{HCN} + \text{NaOH} HCN + NaOH ). Weak electrolytes exist largely as undissociated molecules in water; before neutralization can occur, a fraction of the liberated heat must be consumed endothermically to ionize the weak bonds (known as the enthalpy of ionization, Δ H ion \Delta H_{\text{ion}} Δ H ion ​ ): Δ H observed = Δ H n ∘ ( strong ) + Δ H ion = − 57.4 kJ/mol + Δ H ion \Delta H_{\text{observed}} = \Delta H_n^\circ(\text{strong}) + \Delta H_{\text{ion}} = -57.4\text{ kJ/mol} + \Delta H_{\text{ion}} Δ H observed ​ = Δ H n ∘ ​ ( strong ) + Δ H ion ​ = − 57.4 kJ/mol + Δ H ion ​

4. Experimental Calorimetry: Glass Calorimeter vs. Bomb Calorimeter

Calorimetry is the experimental laboratory technique employed to measure heat absorbed or released during physical or chemical processes.

1. Glass Calorimeter (Coffee-Cup Calorimeter)

The glass calorimeter consists of an insulated glass beaker or nested expanded polystyrene (styrofoam) cups fitted with a cork stopper, a precision sensitive thermometer (e.g., Beckman thermometer reading to 0.01 ∘ C 0.01^\circ\text{C} 0.0 1 ∘ C ), and a wire stirrer. Because the cup is open to atmospheric pressure through a loose vent hole:

It operates at constant pressure ( P = constant P = \text{constant} P = constant ). Hence, the measured heat flow directly equals the enthalpy change: q p = Δ H q_p = \Delta H q p ​ = Δ H

The heat gained or lost by the aqueous solution is determined from the mass of the solution m m m , its specific heat capacity c c c (taken as 4.184 J ⋅ g − 1 ⋅ K − 1 4.184\text{ J}\cdot\text{g}^{-1}\cdot\text{K}^{-1} 4.184 J ⋅ g − 1 ⋅ K − 1 for dilute aqueous solutions, equal to water), and the temperature change Δ T = T final − T initial \Delta T = T_{\text{final}} - T_{\text{initial}} Δ T = T final ​ − T initial ​ : q = m ⋅ c ⋅ Δ T q = m \cdot c \cdot \Delta T q = m ⋅ c ⋅ Δ T

The molar enthalpy change is computed by dividing q q q by the moles of limiting reactant n n n : Δ H = − q n = − m ⋅ c ⋅ Δ T n \Delta H = -\frac{q}{n} = -\frac{m \cdot c \cdot \Delta T}{n} Δ H = − n q ​ = − n m ⋅ c ⋅ Δ T ​

The glass calorimeter is ideally suited for measuring heats of neutralization, heats of solution (dissolution of salts), and precipitation reactions in aqueous media.

2. Bomb Calorimeter

The bomb calorimeter is a specialized, rigid, high-pressure reaction vessel constructed of heavy, corrosion-resistant stainless steel. It is specifically designed to measure heats of combustion for fuels, explosive compounds, food samples, and hydrocarbons that require pure oxygen under pressure:

The sample of known mass is placed in a platinum or silica crucible inside the bomb.

The bomb is pressurized with pure oxygen to 20 to 30 atmospheres 20\text{ to }30\text{ atmospheres} 20 to 30 atmospheres to ensure instantaneous and complete combustion.

An electrical ignition wire (iron or platinum) is submerged into the sample and connected to an external battery circuit.

The sealed steel bomb is immersed in an insulated outer water bath containing a known mass of water, equipped with an electric motorized stirrer and a precision Beckman thermometer.

An electric pulse fires the ignition wire, combusting the sample. Heat released transfers through the steel walls into the surrounding water jacket.

Because the heavy steel walls prevent any volume change ( Δ V = 0 \Delta V = 0 Δ V = 0 ):

No pressure-volume work is done ( w = − P Δ V = 0 w = -P\Delta V = 0 w = − P Δ V = 0 ).

The heat released at constant volume ( q v q_v q v ​ ) represents the internal energy change: q v = Δ U q_v = \Delta U q v ​ = Δ U

Heat released is determined using the calibrated heat capacity of the calorimeter system ( C C C ) : q = C ⋅ Δ T q = C \cdot \Delta T q = C ⋅ Δ T where C = W ⋅ c C = W \cdot c C = W ⋅ c ( W W W is the water equivalent of the calorimeter vessel plus contents, and c c c is the specific heat capacity).

The molar internal energy of combustion is: Δ U c = − C ⋅ Δ T n sample \Delta U_c = -\frac{C \cdot \Delta T}{n_{\text{sample}}} Δ U c ​ = − n sample ​ C ⋅ Δ T ​

To obtain the standard enthalpy of combustion Δ H c ∘ \Delta H_c^\circ Δ H c ∘ ​ , apply the thermodynamic conversion: Δ H c ∘ = Δ U c + Δ n g R T \Delta H_c^\circ = \Delta U_c + \Delta n_g R T Δ H c ∘ ​ = Δ U c ​ + Δ n g ​ RT where Δ n g \Delta n_g Δ n g ​ is the net change in stoichiometric moles of gaseous reactants and products.

5. Hess's Law of Constant Heat Summation

Formulated empirically by Germain Henri Hess in 1840, Hess's Law of Constant Heat Summation is a direct corollary of the First Law of Thermodynamics and the state function nature of enthalpy:

Statement: If a chemical reaction can be carried out in a single step or in a sequence of multiple independent steps, the overall enthalpy change ( Δ H \Delta H Δ H ) is identical, regardless of the pathway or the intermediate stages traversed, provided initial reactants and final products are in the identical thermodynamic states.

If a direct reaction A → B A \rightarrow B A → B has enthalpy Δ H \Delta H Δ H , and the alternative multi-step route proceeds through intermediates C C C and D D D with enthalpies Δ H 1 \Delta H_1 Δ H 1 ​ , Δ H 2 \Delta H_2 Δ H 2 ​ , and Δ H 3 \Delta H_3 Δ H 3 ​ ( A → C → D → B A \rightarrow C \rightarrow D \rightarrow B A → C → D → B ):

Δ H = Δ H 1 + Δ H 2 + Δ H 3 \Delta H = \Delta H_1 + \Delta H_2 + \Delta H_3 Δ H = Δ H 1 ​ + Δ H 2 ​ + Δ H 3 ​ ΔH (direct path)

  • A ───────────────────────► B
  • │ ▲
  • ΔH₁ │ │ ΔH₃
  • ▼ │
  • C ───────────────────────► D
  • ΔH₂
  • Crucial Applications in ECAT Calculations

Hess's Law is indispensable because many chemical reactions cannot be measured directly in a calorimeter. For instance, the complete oxidation of graphite cannot be halted cleanly at carbon monoxide ( CO \text{CO} CO ); it inevitably produces a mixture of CO \text{CO} CO and CO 2 \text{CO}_2 CO 2 ​ . By combining the easily measured combustions of graphite and carbon monoxide:

C ( graphite ) + O 2 ( g ) → CO 2 ( g ) Δ H 1 ∘ = − 393.5 kJ/mol \text{C}(\text{graphite}) + \text{O}_2(g) \rightarrow \text{CO}_2(g) \quad \Delta H_1^\circ = -393.5\text{ kJ/mol} C ( graphite ) + O 2 ​ ( g ) → CO 2 ​ ( g ) Δ H 1 ∘ ​ = − 393.5 kJ/mol

CO ( g ) + 1 2 O 2 ( g ) → CO 2 ( g ) Δ H 2 ∘ = − 283.0 kJ/mol \text{CO}(g) + \frac{1}{2}\text{O}_2(g) \rightarrow \text{CO}_2(g) \quad \Delta H_2^\circ = -283.0\text{ kJ/mol} CO ( g ) + 2 1 ​ O 2 ​ ( g ) → CO 2 ​ ( g ) Δ H 2 ∘ ​ = − 283.0 kJ/mol

Reversing equation (2) and adding it to equation (1):

C ( graphite ) + O 2 ( g ) + CO 2 ( g ) → CO 2 ( g ) + CO ( g ) + 1 2 O 2 ( g ) \text{C}(\text{graphite}) + \text{O}_2(g) + \text{CO}_2(g) \rightarrow \text{CO}_2(g) + \text{CO}(g) + \frac{1}{2}\text{O}_2(g) C ( graphite ) + O 2 ​ ( g ) + CO 2 ​ ( g ) → CO 2 ​ ( g ) + CO ( g ) + 2 1 ​ O 2 ​ ( g )

C ( graphite ) + 1 2 O 2 ( g ) → CO ( g ) \text{C}(\text{graphite}) + \frac{1}{2}\text{O}_2(g) \rightarrow \text{CO}(g) C ( graphite ) + 2 1 ​ O 2 ​ ( g ) → CO ( g )

Δ H f ∘ [ CO ] = Δ H 1 ∘ − Δ H 2 ∘ = − 393.5 − ( − 283.0 ) = − 110.5 kJ/mol \Delta H_f^\circ[\text{CO}] = \Delta H_1^\circ - \Delta H_2^\circ = -393.5 - (-283.0) = -110.5\text{ kJ/mol} Δ H f ∘ ​ [ CO ] = Δ H 1 ∘ ​ − Δ H 2 ∘ ​ = − 393.5 − ( − 283.0 ) = − 110.5 kJ/mol

General Formula from Standard Enthalpies of Formation

For any generalized reaction a A + b B → c C + d D aA + bB \rightarrow cC + dD a A + b B → c C + d D , Hess's Law yields:

Δ H reaction ∘ = ∑ n Δ H f ∘ ( products ) − ∑ m Δ H f ∘ ( reactants ) \Delta H^\circ_{\text{reaction}} = \sum n\Delta H_f^\circ(\text{products}) - \sum m\Delta H_f^\circ(\text{reactants}) Δ H reaction ∘ ​ = ∑ n Δ H f ∘ ​ ( products ) − ∑ m Δ H f ∘ ​ ( reactants )

Δ H reaction ∘ = [ c Δ H f ∘ ( C ) + d Δ H f ∘ ( D ) ] − [ a Δ H f ∘ ( A ) + b Δ H f ∘ ( B ) ] \Delta H^\circ_{\text{reaction}} = \left[c\Delta H_f^\circ(C) + d\Delta H_f^\circ(D)\right] - \left[a\Delta H_f^\circ(A) + b\Delta H_f^\circ(B)\right] Δ H reaction ∘ ​ = [ c Δ H f ∘ ​ ( C ) + d Δ H f ∘ ​ ( D ) ] − [ a Δ H f ∘ ​ ( A ) + b Δ H f ∘ ​ ( B ) ]

6. The Born-Haber Cycle & Lattice Energy of Ionic Solids

Ionic solids such as sodium chloride ( NaCl \text{NaCl} NaCl ) and magnesium oxide ( MgO \text{MgO} MgO ) consist of infinite three-dimensional crystal lattices stabilized by strong electrostatic attractions between oppositely charged ions.

Definition of Lattice Energy ( Δ H L \Delta H_L Δ H L ​ )

The lattice energy ( Δ H L \Delta H_L Δ H L ​ or U 0 U_0 U 0 ​ ) of an ionic crystalline compound is defined as the enthalpy change that occurs when one mole of the solid crystalline ionic compound is formed from its constituent gaseous ions separated to infinite distance under standard conditions:

M z + ( g ) + X z − ( g ) → MX ( s ) Δ H L < 0 ( exothermic convention ) \text{M}^{z+}(g) + \text{X}^{z-}(g) \rightarrow \text{MX}(s) \quad \Delta H_L < 0 \quad (\text{exothermic convention}) M z + ( g ) + X z − ( g ) → MX ( s ) Δ H L ​ < 0 ( exothermic convention )

(Alternatively, in some physical contexts, lattice dissociation energy is defined as the energy required to completely separate one mole of the solid crystal into isolated gaseous ions, which is equal in magnitude but positive: Δ H L , diss > 0 \Delta H_{L,\text{diss}} > 0 Δ H L , diss ​ > 0 . On the ECAT, lattice formation is treated as exothermic, yielding large negative values.)

Because gaseous ions cannot be combined directly in a calorimeter without solvent or competing phases, lattice energy cannot be measured directly. Max Born and Fritz Haber devised a closed thermochemical cyclic application of Hess's Law known as the Born-Haber Cycle .

Stepwise Dissection of the Born-Haber Cycle for NaCl ( s ) \text{NaCl}(s) NaCl ( s )

The synthesis of solid sodium chloride from its standard elemental states represents the standard enthalpy of formation:

Na ( s ) + 1 2 Cl 2 ( g ) → NaCl ( s ) Δ H f ∘ = − 411 kJ/mol \text{Na}(s) + \frac{1}{2}\text{Cl}_2(g) \rightarrow \text{NaCl}(s) \quad \Delta H_f^\circ = -411\text{ kJ/mol} Na ( s ) + 2 1 ​ Cl 2 ​ ( g ) → NaCl ( s ) Δ H f ∘ ​ = − 411 kJ/mol

The alternative indirect route consists of five discrete thermodynamic steps:

Sublimation of Solid Sodium ( Δ H s ∘ \Delta H_s^\circ Δ H s ∘ ​ or Δ H at ∘ [ Na ] \Delta H_{\text{at}}^\circ[\text{Na}] Δ H at ∘ ​ [ Na ] ): Solid sodium metal is vaporized into isolated gaseous sodium atoms: Na ( s ) → Na ( g ) Δ H s ∘ = + 108 kJ/mol ( endothermic ) \text{Na}(s) \rightarrow \text{Na}(g) \quad \Delta H_s^\circ = +108\text{ kJ/mol} \quad (\text{endothermic}) Na ( s ) → Na ( g ) Δ H s ∘ ​ = + 108 kJ/mol ( endothermic )

First Ionization Energy of Sodium ( I E 1 IE_1 I E 1 ​ ): One mole of electrons is removed from gaseous sodium atoms to generate gaseous sodium cations: Na ( g ) → Na + ( g ) + e − I E 1 = + 496 kJ/mol ( endothermic ) \text{Na}(g) \rightarrow \text{Na}^+(g) + e^- \quad IE_1 = +496\text{ kJ/mol} \quad (\text{endothermic}) Na ( g ) → Na + ( g ) + e − I E 1 ​ = + 496 kJ/mol ( endothermic )

Dissociation / Atomization of Chlorine Gas ( 1 2 Δ H diss ∘ \frac{1}{2}\Delta H_{\text{diss}}^\circ 2 1 ​ Δ H diss ∘ ​ or Δ H at ∘ [ Cl ] \Delta H_{\text{at}}^\circ[\text{Cl}] Δ H at ∘ ​ [ Cl ] ): Half a mole of diatomic chlorine gas molecules is cleaved into one mole of gaseous chlorine free radicals: 1 2 Cl 2 ( g ) → Cl ( g ) 1 2 Δ H diss ∘ = + 121 kJ/mol ( endothermic, as bond energy D Cl-Cl = + 242 kJ/mol ) \frac{1}{2}\text{Cl}_2(g) \rightarrow \text{Cl}(g) \quad \frac{1}{2}\Delta H_{\text{diss}}^\circ = +121\text{ kJ/mol} \quad (\text{endothermic, as bond energy } D_{\text{Cl-Cl}} = +242\text{ kJ/mol}) 2 1 ​ Cl 2 ​ ( g ) → Cl ( g ) 2 1 ​ Δ H diss ∘ ​ = + 121 kJ/mol ( endothermic, as bond energy D Cl-Cl ​ = + 242 kJ/mol )

First Electron Affinity of Chlorine ( E A 1 EA_1 E A 1 ​ ): One mole of gaseous chlorine atoms captures one mole of electrons to produce gaseous chloride anions: Cl ( g ) + e − → Cl − ( g ) E A 1 = − 349 kJ/mol ( exothermic ) \text{Cl}(g) + e^- \rightarrow \text{Cl}^-(g) \quad EA_1 = -349\text{ kJ/mol} \quad (\text{exothermic}) Cl ( g ) + e − → Cl − ( g ) E A 1 ​ = − 349 kJ/mol ( exothermic )

Lattice Formation Enthalpy ( Δ H L \Delta H_L Δ H L ​ ): Gaseous sodium cations and gaseous chloride anions condense to form one mole of rigid crystalline sodium chloride: Na + ( g ) + Cl − ( g ) → NaCl ( s ) Δ H L \text{Na}^+(g) + \text{Cl}^-(g) \rightarrow \text{NaCl}(s) \quad \Delta H_L Na + ( g ) + Cl − ( g ) → NaCl ( s ) Δ H L ​

Algebraic Formulation of the Cycle

By Hess's Law, the direct formation enthalpy equals the algebraic sum of all steps in the indirect route:

Δ H f ∘ = Δ H s ∘ + I E 1 + 1 2 Δ H diss ∘ + E A 1 + Δ H L \Delta H_f^\circ = \Delta H_s^\circ + IE_1 + \frac{1}{2}\Delta H_{\text{diss}}^\circ + EA_1 + \Delta H_L Δ H f ∘ ​ = Δ H s ∘ ​ + I E 1 ​ + 2 1 ​ Δ H diss ∘ ​ + E A 1 ​ + Δ H L ​

Rearranging to isolate lattice energy Δ H L \Delta H_L Δ H L ​ :

Δ H L = Δ H f ∘ − [ Δ H s ∘ + I E 1 + 1 2 Δ H diss ∘ + E A 1 ] \Delta H_L = \Delta H_f^\circ - \left[\Delta H_s^\circ + IE_1 + \frac{1}{2}\Delta H_{\text{diss}}^\circ + EA_1\right] Δ H L ​ = Δ H f ∘ ​ − [ Δ H s ∘ ​ + I E 1 ​ + 2 1 ​ Δ H diss ∘ ​ + E A 1 ​ ]

Substituting standard experimental values:

Δ H L = − 411 − [ 108 + 496 + 121 + ( − 349 ) ] = − 411 − [ 376 ] = − 787 kJ/mol \Delta H_L = -411 - [108 + 496 + 121 + (-349)] = -411 - [376] = -787\text{ kJ/mol} Δ H L ​ = − 411 − [ 108 + 496 + 121 + ( − 349 )] = − 411 − [ 376 ] = − 787 kJ/mol

Factors Governing the Magnitude of Lattice Energy

Electrostatic lattice energy is approximated by the Born-Landé or Kapustinskii equation derived from Coulomb's Law:

Δ H L ∝ − z + ⋅ z − r + + r − \Delta H_L \propto -\frac{z^+ \cdot z^-}{r_+ + r_-} Δ H L ​ ∝ − r + ​ + r − ​ z + ⋅ z − ​

Ionic Charges ( z + , z − z^+, z^- z + , z − ): Lattice energy increases dramatically as ionic charges increase. For example, in MgO \text{MgO} MgO , z + = + 2 z^+ = +2 z + = + 2 and z − = − 2 z^- = -2 z − = − 2 ( z + z − = 4 z^+ z^- = 4 z + z − = 4 ), giving a massive lattice energy of Δ H L = − 3791 kJ/mol \Delta H_L = -3791\text{ kJ/mol} Δ H L ​ = − 3791 kJ/mol , nearly five times greater than that of NaCl \text{NaCl} NaCl ( z + z − = 1 , Δ H L = − 787 kJ/mol z^+ z^- = 1, \Delta H_L = -787\text{ kJ/mol} z + z − = 1 , Δ H L ​ = − 787 kJ/mol ).

Internuclear Separation / Ionic Radii ( r + + r − r_+ + r_- r + ​ + r − ​ ): Smaller ionic radii allow ions to pack closer together, intensifying electrostatic attractions and increasing lattice energy: LiF ( − 1030 kJ/mol ) > NaCl ( − 787 kJ/mol ) > KBr ( − 671 kJ/mol ) \text{LiF} (-1030\text{ kJ/mol}) > \text{NaCl} (-787\text{ kJ/mol}) > \text{KBr} (-671\text{ kJ/mol}) LiF ( − 1030 kJ/mol ) > NaCl ( − 787 kJ/mol ) > KBr ( − 671 kJ/mol ) .

7. Reaction Spontaneity & Gibbs Free Energy ( Δ G \Delta G Δ G )

A spontaneous process is a natural process that proceeds on its own without requiring persistent external driving forces (e.g., water flowing downhill, heat diffusing from hot to cold bodies, gas expanding into a vacuum). While many spontaneous processes are exothermic ( Δ H < 0 \Delta H < 0 Δ H < 0 ), some endothermic processes (e.g., dissolution of NH 4 NO 3 \text{NH}_4\text{NO}_3 NH 4 ​ NO 3 ​ in water, melting of ice above 0 ∘ C 0^\circ\text{C} 0 ∘ C ) occur spontaneously because of an increase in molecular disorder ( entropy , S S S ).

The Second Law of Thermodynamics establishes that for any spontaneous process, the total entropy of the universe must strictly increase:

Δ S universe = Δ S system + Δ S surroundings > 0 \Delta S_{\text{universe}} = \Delta S_{\text{system}} + \Delta S_{\text{surroundings}} > 0 Δ S universe ​ = Δ S system ​ + Δ S surroundings ​ > 0

Josiah Willard Gibbs combined enthalpy and entropy into a single thermodynamic state function called Gibbs Free Energy ( G G G ) :

G = H − T S G = H - TS G = H − TS

For an isothermal, isobaric process, the change in Gibbs free energy is:

  • Δ G = Δ H − T Δ S \Delta G = \Delta H - T\Delta S Δ G = Δ H − T Δ S
  • Spontaneity Criteria

Δ G < 0 \Delta G < 0 Δ G < 0 (Negative): The process is spontaneous (exergonic). Useful work can be extracted.

Δ G = 0 \Delta G = 0 Δ G = 0 (Zero): The system is in a state of dynamic equilibrium ( T eq = Δ H Δ S T_{\text{eq}} = \frac{\Delta H}{\Delta S} T eq ​ = Δ S Δ H ​ ).

Δ G > 0 \Delta G > 0 Δ G > 0 (Positive): The process is non-spontaneous (endergonic). Energy must be continuously supplied; however, the reverse process is spontaneous.

Temperature-Dependent Spontaneity Matrix

Δ H \Delta H Δ H Δ S \Delta S Δ S − T Δ S -T\Delta S − T Δ S Sign of Δ G = Δ H − T Δ S \Delta G = \Delta H - T\Delta S Δ G = Δ H − T Δ S Spontaneity Condition Physical Example

Negative ( − - − ) Positive ( + + + ) Negative ( − - − ) Always Negative ( − - − ) Spontaneous at all temperatures 2 O 3 ( g ) → 3 O 2 ( g ) 2\text{O}_3(g) \rightarrow 3\text{O}_2(g) 2 O 3 ​ ( g ) → 3 O 2 ​ ( g )

Positive ( + + + ) Negative ( − - − ) Positive ( + + + ) Always Positive ( + + + ) Non-spontaneous at all temperatures 3 O 2 ( g ) → 2 O 3 ( g ) 3\text{O}_2(g) \rightarrow 2\text{O}_3(g) 3 O 2 ​ ( g ) → 2 O 3 ​ ( g )

Negative ( − - − ) Negative ( − - − ) Positive ( + + + ) Negative at low T T T ; Positive at high T T T Spontaneous only at low temperatures ( T < Δ H Δ S T < \frac{\Delta H}{\Delta S} T < Δ S Δ H ​ ) Condensation of steam, freezing of water

Positive ( + + + ) Positive ( + + + ) Negative ( − - − ) Positive at low T T T ; Negative at high T T T Spontaneous only at high temperatures ( T > Δ H Δ S T > \frac{\Delta H}{\Delta S} T > Δ S Δ H ​ ) Thermal decomposition of CaCO 3 ( s ) \text{CaCO}_3(s) CaCO 3 ​ ( s ) , evaporation

8. Thermochemical Parameters & Standard Definitions Reference Table

Parameter Symbol Operational Definition Sign Convention Standard Units

Internal Energy Change Δ U \Delta U Δ U Heat exchanged at constant volume ( Δ U = q v \Delta U = q_v Δ U = q v ​ ) + + + for endothermic, − - − for exothermic kJ ⋅ mol − 1 \text{kJ}\cdot\text{mol}^{-1} kJ ⋅ mol − 1

Enthalpy Change Δ H \Delta H Δ H Heat exchanged at constant pressure ( q p = Δ U + P Δ V q_p = \Delta U + P\Delta V q p ​ = Δ U + P Δ V ) + + + for endothermic, − - − for exothermic kJ ⋅ mol − 1 \text{kJ}\cdot\text{mol}^{-1} kJ ⋅ mol − 1

Standard Enthalpy of Formation Δ H f ∘ \Delta H_f^\circ Δ H f ∘ ​ Enthalpy change to form 1 mol 1\text{ mol} 1 mol compound from standard reference elements Assigned 0 0 0 for pure reference elements kJ ⋅ mol − 1 \text{kJ}\cdot\text{mol}^{-1} kJ ⋅ mol − 1

Standard Enthalpy of Combustion Δ H c ∘ \Delta H_c^\circ Δ H c ∘ ​ Enthalpy change when 1 mol 1\text{ mol} 1 mol substance burns completely in excess O 2 \text{O}_2 O 2 ​ Invariably negative ( − - − ) kJ ⋅ mol − 1 \text{kJ}\cdot\text{mol}^{-1} kJ ⋅ mol − 1

Standard Enthalpy of Atomization Δ H at ∘ \Delta H_{\text{at}}^\circ Δ H at ∘ ​ Enthalpy change to produce 1 mol 1\text{ mol} 1 mol gaseous atoms from standard state Invariably positive ( + + + ) kJ ⋅ mol − 1 \text{kJ}\cdot\text{mol}^{-1} kJ ⋅ mol − 1

Standard Enthalpy of Neutralization Δ H n ∘ \Delta H_n^\circ Δ H n ∘ ​ Enthalpy change when 1 mol 1\text{ mol} 1 mol H 2 O \text{H}_2\text{O} H 2 ​ O forms from acid-base neutralization Invariably negative ( − 57.4 kJ/mol -57.4\text{ kJ/mol} − 57.4 kJ/mol for strong pairs) kJ ⋅ mol − 1 \text{kJ}\cdot\text{mol}^{-1} kJ ⋅ mol − 1

Lattice Energy Δ H L \Delta H_L Δ H L ​ Enthalpy change when 1 mol 1\text{ mol} 1 mol ionic crystal forms from gaseous ions Exothermic convention (large negative values) kJ ⋅ mol − 1 \text{kJ}\cdot\text{mol}^{-1} kJ ⋅ mol − 1

Gibbs Free Energy Change Δ G \Delta G Δ G Net change in usable driving energy at constant T , P T, P T , P ( Δ G = Δ H − T Δ S \Delta G = \Delta H - T\Delta S Δ G = Δ H − T Δ S ) Spontaneous if Δ G < 0 \Delta G < 0 Δ G < 0 ; Equilibrium if Δ G = 0 \Delta G = 0 Δ G = 0 kJ ⋅ mol − 1 \text{kJ}\cdot\text{mol}^{-1} kJ ⋅ mol − 1

Loading diagram... Born-Haber Thermochemical Cycle for Sodium Chloride (NaCl)