Study guide
11.4 Simple Harmonic Motion (SHM), Pendulum, Mass-Spring & Resonance
Pakistan ECAT Engineering Colleges Admission Test
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: ECAT Exam Structure, Scoring & Strategy
1.1 ECAT Exam Pattern, Scoring Scheme & UET Merit Aggregate 1.2 Time Management, Pacing & MCQ Problem-Solving Tactics
2 Chapter 2: Mathematics — Number Systems, Sets & Algebra
2.1 Real Numbers, Sets, Logic, Binary Operations & Groups 2.2 Complex Numbers, Modulus, Conjugates & De Moivre's Theorem 2.3 Matrices, Determinants, Inverses & Systems of Linear Equations 2.4 Quadratic Equations, Relations Between Roots & Factor/Remainder Theorems
3 Chapter 3: Mathematics — Sequences, Series & Combinatorics
3.1 Arithmetic, Geometric & Harmonic Progressions (AP, GP, HP) 3.2 Permutations, Combinations & Probability Distributions 3.3 Mathematical Induction & the Binomial Theorem
4 Chapter 4: Mathematics — Trigonometry & Trigonometric Equations
4.1 Fundamental Trigonometric Identities & Angle Addition Formulas 4.2 Graphs of Trigonometric Functions & Inverse Trigonometric Functions 4.3 Solutions of Triangles (Sine/Cosine Laws) & Trigonometric Equations
5 Chapter 5: Mathematics — Functions, Limits & Continuity
5.1 Real-Valued Functions, Types, Domains & Ranges 5.2 Limits of Functions, Indeterminate Forms & Squeeze Theorem 5.3 Continuity, Types of Discontinuity & Asymptotes
6 Chapter 6: Mathematics — Differential Calculus
6.1 Definition of Derivative, Power, Product, Quotient & Chain Rules 6.2 Derivatives of Trigonometric, Exponential & Logarithmic Functions 6.3 Implicit Differentiation, Parametric Equations & Higher-Order Derivatives 6.4 Tangents, Normals, Increasing/Decreasing Functions & Extrema
7 Chapter 7: Mathematics — Integral Calculus
7.1 Indefinite Integration Formulas & Integration by Substitution 7.2 Integration by Parts & Partial Fractions 7.3 Definite Integrals, Properties & Fundamental Theorem of Calculus 7.4 Area Under Curves & First-Order Differential Equations
8 Chapter 8: Mathematics — Analytic Geometry, Linear Programming & Vectors
8.1 Coordinates, Slopes, Straight Line Equations & Distances 8.2 Linear Inequalities & Linear Programming 8.3 Circle Equations, Tangents, Normals & Intersections 8.4 Conic Sections: Parabola, Ellipse & Hyperbola Characteristics 8.5 Vectors in 2D and 3D, Dot Product, Cross Product & Scalar Triple Product
9 Chapter 9: Physics — Measurements, Vectors & Equilibrium
9.1 Physical Quantities, SI Units, Errors & Dimensional Analysis 9.2 Vector Addition, Components, Scalar & Vector Products in Physics 9.3 Equilibrium Conditions, Torque & Rotational Equilibrium
10 Chapter 10: Physics — Kinematics, Dynamics & Energy
10.1 Kinematics: Displacement, Velocity, Acceleration & Motion Equations 10.2 Newton's Laws of Motion, Momentum, Impulse & Elastic Collisions 10.3 Projectile Motion: Trajectory, Height, Flight Time & Range 10.4 Work, Energy, Work-Energy Theorem, Conservative Forces & Power
11 Chapter 11: Physics — Circular Motion, Gravitation, Fluids & Oscillations
11.1 Uniform Circular Motion, Centripetal Force & Moment of Inertia 11.2 Gravitation, Escape Velocity, Satellites & Weightlessness 11.3 Viscosity, Drag Force, Equation of Continuity & Bernoulli's Principle 11.4 Simple Harmonic Motion (SHM), Pendulum, Mass-Spring & Resonance
12 Chapter 12: Physics — Waves, Optics, Optical Instruments & Thermodynamics
12.1 Waves, Speed of Sound, Standing Waves & Doppler Effect 12.2 Wave Theory of Light, Interference & Young's Double-Slit Experiment 12.3 Diffraction Grating, Resolving Power & Polarization of Light 12.4 Optical Instruments: Magnifiers, Microscopes, Telescopes, Spectrometer & Fibre Optics 12.5 Kinetic Theory of Gases, First Law, Heat Engines & Carnot Cycle
13 Chapter 13: Physics — Electrostatics, Current Electricity & Electromagnetism
13.1 Coulomb's Law, Electric Fields, Gauss's Law & Capacitors 13.2 Electric Current, Resistance, Ohm's Law, Kirchhoff's Rules & Potentiometer 13.3 Magnetic Fields, Ampere's Law, Faraday's Law, Lenz's Law & Transformers
14 Chapter 14: Physics — Alternating Current, Physics of Solids & Electronics
14.1 Alternating Current: RMS Values, Reactance, Impedance, Resonance & Power 14.2 Physics of Solids: Elasticity, Band Theory, Superconductors & Magnetic Materials 14.3 Electronics: p-n Junction, Rectifiers, Transistors, Op-Amps & Logic Gates
15 Chapter 15: Physics — Modern, Atomic & Nuclear Physics
15.1 Special Relativity, Mass–Energy Equivalence, Pair Production & Annihilation 15.2 Photoelectric Effect, Photons, Atomic Spectra, X-Rays & Nuclear Reactions 15.3 Lasers, Nuclear Reactors, Radiation Detectors, Dosimetry & Elementary Particles
16 Chapter 16: Chemistry — Basic Concepts, Atomic Structure, Bonding & States of Matter
16.1 Mole Concept, Stoichiometry, Limiting Reactants, Isotopes & Experimental Techniques 16.2 Atomic Structure, Bohr's Model, Quantum Numbers & Electronic Configurations 16.3 Chemical Bonding: Ionic, Covalent & Coordinate Bonds, VSEPR, Hybridization & MOT 16.4 Gas Laws, Ideal Gas Equation, Kinetic Molecular Theory & Real Gases 16.5 Liquids, Intermolecular Forces, Hydrogen Bonding & Crystal Lattices
17 Chapter 17: Chemistry — Energetics, Equilibrium & Kinetics
17.1 Enthalpy Changes, Calorimetry, Hess's Law & Born-Haber Cycle 17.2 Reversible Reactions, Equilibrium Constants (Kc, Kp), Le Chatelier & Ksp 17.3 Solutions, Concentration Units, Colligative Properties & Raoult's Law 17.4 Reaction Rates, Rate Equations, Order of Reaction & Activation Energy
18 Chapter 18: Chemistry — Periodic Trends, s-, p- & d-Block Elements & Electrochemistry
18.1 Periodic Trends: Atomic Radii, Ionization Energies & Electronegativities 18.2 Chemistry of s-Block and p-Block Elements (Groups I, II, III, IV, VII) 18.3 Groups V-A & VI-A: Nitrogen, Phosphorus, Oxygen & Sulphur Compounds 18.4 Transition Elements: Electronic Configurations, Complexes & Colors 18.5 Oxidation Numbers, Electrochemical Cells, Standard Potentials & Batteries
19 Chapter 19: Chemistry — Organic Chemistry & Reaction Mechanisms
19.1 Organic Functional Groups, IUPAC Nomenclature & Structural/Stereoisomerism 19.2 Aliphatic Hydrocarbons: Alkanes, Alkenes, Alkynes & Addition Reactions 19.3 Benzene: Electronic Structure, Resonance Stability & Electrophilic Substitution 19.4 Alkyl Halides (SN1/SN2), Grignard Reagents & Functional-Group Tests 19.5 Alcohols, Phenols & Ethers: Preparation and Reactions 19.6 Aldehydes, Ketones, Carboxylic Acids, Acid Derivatives & Amino Acids
20 Chapter 20: Chemistry — Macromolecules, Chemical Industries & Environment
20.1 Macromolecules: Polymers, Carbohydrates, Proteins, Lipids, Enzymes & Nucleic Acids 20.2 Chemical Industries in Pakistan & Environmental Chemistry
21 Chapter 21: English — Reading Comprehension, Vocabulary & Grammar
21.1 Reading Comprehension Strategies, Main Ideas, Inferences & Tone 21.2 Academic Vocabulary, Context Clues, Synonyms & Antonyms 21.3 Subject-Verb Agreement, Tenses & Grammatical Concord 21.4 Sentence Correction, Parallelism, Modifiers & Prepositions
11.4 Simple Harmonic Motion (SHM), Pendulum, Mass-Spring & Resonance
Key Takeaways Explain This Topic AI
Simple Harmonic Motion (SHM) is defined by the acceleration differential relation a = − ω 2 x a = -\omega^2 x a = − ω 2 x , where acceleration is directly proportional to displacement and continuously directed toward the mean equilibrium position.
For a mass-spring system, the period T = 2 π m k T = 2\pi\sqrt{\frac{m}{k}} T = 2 π k m is governed by inertial mass and elastic stiffness; cutting a spring into n n n equal segments multiplies the spring constant of each segment by n n n ( k ′ = n k k' = nk k ′ = nk ).
A simple pendulum has period T = 2 π l g T = 2\pi\sqrt{\frac{l}{g}} T = 2 π g l independent of bob mass and angular amplitude (for small angles θ ≤ 10 ∘ \theta \le 10^\circ θ ≤ 1 0 ∘ ); a second's pendulum has T = 2 s T = 2\text{ s} T = 2 s and a precise length of l ≈ 0.992 m l \approx 0.992\text{ m} l ≈ 0.992 m on Earth.
Total mechanical energy in SHM is invariant ( E total = 1 2 k x 0 2 E_{\text{total}} = \frac{1}{2}kx_0^2 E total = 2 1 k x 0 2 ); kinetic and potential energies equalize ( K = U = 1 2 E total K = U = \frac{1}{2}E_{\text{total}} K = U = 2 1 E total ) at displacement x = x 0 2 ≈ 0.707 x 0 x = \frac{x_0}{\sqrt{2}} \approx 0.707 x_0 x = 2 x 0 ≈ 0.707 x 0 , and oscillate at twice the system frequency ( f E = 2 f f_E = 2f f E = 2 f ).
Resonance occurs when the driving frequency matches the natural frequency ( f drive = f 0 f_{\text{drive}} = f_0 f drive = f 0 ), resulting in maximal energy transfer and peaked amplitudes whose sharpness is inversely governed by system damping.
Last updated: October 2026
Simple Harmonic Motion (SHM), Pendulum, Mass-Spring & Resonance
Oscillatory and vibrational mechanics, detailed in of the Intermediate Physics Part I syllabus, represent one of the most conceptually rich and mathematically tested areas of the UET ECAT. Simple Harmonic Motion (SHM) describes periodic back-and-forth motion governed by a linear restoring force directed toward a stable equilibrium state. In engineering entrance exams, problems frequently test analytical phase differences, instantaneous kinetic and potential energy partitions, spring combinations, effective pendulum lengths across varying gravitational fields, and resonance phenomena. Developing rapid algebraic fluency with SHM formulas without relying on numerical calculators is essential for exam pacing.
- 1. Kinematics and Fundamental Definition of SHM
- The Fundamental Dynamical Definition
A mechanical system undergoes Simple Harmonic Motion (SHM) if and only if its acceleration a a a is directly proportional to its displacement x x x from the mean equilibrium position and is always directed toward that mean position:
a ∝ − x ⟹ a = − ω 2 x a \propto -x \implies a = -\omega^2 x a ∝ − x ⟹ a = − ω 2 x
Where:
x x x is the instantaneous displacement from equilibrium (meters, m \text{m} m ).
ω \omega ω is the circular angular frequency of oscillation (radians per second, rad ⋅ s − 1 \text{rad}\cdot\text{s}^{-1} rad ⋅ s − 1 ).
The negative sign indicates that acceleration is invariably directed opposite to displacement—namely, pointing back toward x = 0 x = 0 x = 0 .
By Newton's second law ( F = m a F = m a F = ma ):
F = m ( − ω 2 x ) = − m ω 2 x = − k x F = m(-\omega^2 x) = -m\omega^2 x = -k x F = m ( − ω 2 x ) = − m ω 2 x = − k x
Where k = m ω 2 k = m\omega^2 k = m ω 2 is the restoring spring stiffness constant ( N ⋅ m − 1 \text{N}\cdot\text{m}^{-1} N ⋅ m − 1 ), confirming Hooke's law as the dynamical origin of SHM.
Equations of Kinematics in SHM
Representing SHM as the projection of uniform circular motion of reference radius x 0 x_0 x 0 (amplitude) onto a diameter yields the standard kinematic wave functions:
Instantaneous Displacement ( x x x ):
x ( t ) = x 0 sin ( ω t + ϕ ) x(t) = x_0 \sin(\omega t + \phi) x ( t ) = x 0 sin ( ω t + ϕ )
If timing starts at the mean position ( x = 0 x=0 x = 0 at t = 0 t=0 t = 0 ), initial phase ϕ = 0 ⟹ x ( t ) = x 0 sin ( ω t ) \phi = 0 \implies x(t) = x_0 \sin(\omega t) ϕ = 0 ⟹ x ( t ) = x 0 sin ( ω t ) . If timing starts at maximum positive amplitude ( x = x 0 x = x_0 x = x 0 at t = 0 t=0 t = 0 ), ϕ = π 2 ⟹ x ( t ) = x 0 cos ( ω t ) \phi = \frac{\pi}{2} \implies x(t) = x_0 \cos(\omega t) ϕ = 2 π ⟹ x ( t ) = x 0 cos ( ω t ) .
Instantaneous Velocity ( v v v ): Differentiating displacement with respect to time:
v ( t ) = d x d t = ω x 0 cos ( ω t + ϕ ) v(t) = \frac{dx}{dt} = \omega x_0 \cos(\omega t + \phi) v ( t ) = d t d x = ω x 0 cos ( ω t + ϕ )
Using the identity cos θ = ± 1 − sin 2 θ = ± 1 − ( x / x 0 ) 2 \cos\theta = \pm\sqrt{1 - \sin^2\theta} = \pm\sqrt{1 - (x/x_0)^2} cos θ = ± 1 − sin 2 θ = ± 1 − ( x / x 0 ) 2 :
v ( x ) = ± ω x 0 2 − x 2 v(x) = \pm \omega \sqrt{x_0^2 - x^2} v ( x ) = ± ω x 0 2 − x 2
At the mean position ( x = 0 x = 0 x = 0 ): Speed attains its maximum value: v max = ω x 0 v_{\text{max}} = \omega x_0 v max = ω x 0 .
At the extreme positions ( x = ± x 0 x = \pm x_0 x = ± x 0 ): Speed drops to zero: v = 0 v = 0 v = 0 .
Instantaneous Acceleration ( a a a ): Differentiating velocity with respect to time:
a ( t ) = d v d t = − ω 2 x 0 sin ( ω t + ϕ ) = − ω 2 x a(t) = \frac{dv}{dt} = -\omega^2 x_0 \sin(\omega t + \phi) = -\omega^2 x a ( t ) = d t d v = − ω 2 x 0 sin ( ω t + ϕ ) = − ω 2 x
At the mean position ( x = 0 x = 0 x = 0 ): Acceleration is zero: a = 0 a = 0 a = 0 .
At the extreme positions ( x = ± x 0 x = \pm x_0 x = ± x 0 ): Acceleration attains maximum magnitude: a max = ω 2 x 0 a_{\text{max}} = \omega^2 x_0 a max = ω 2 x 0 .
Phase Relationships Between Kinematic Variables
A central focus of ECAT multiple-choice questions is the phase angle difference between SHM kinematic variables:
Displacement vs Velocity: Velocity leads displacement by a phase angle of π 2 rad \frac{\pi}{2}\text{ rad} 2 π rad ( 90 ∘ 90^\circ 9 0 ∘ ).
Velocity vs Acceleration: Acceleration leads velocity by a phase angle of π 2 rad \frac{\pi}{2}\text{ rad} 2 π rad ( 90 ∘ 90^\circ 9 0 ∘ ).
Displacement vs Acceleration: Acceleration and displacement are in exact phase opposition, differing by a phase angle of π rad \pi\text{ rad} π rad ( 180 ∘ 180^\circ 18 0 ∘ ).
- 2. Mass-Spring Systems
- Horizontal and Vertical Oscillators
Consider an ideal block of mass m m m attached to a massless spring of stiffness constant k k k .
Restoring Force: F = − k x F = -k x F = − k x .
Equating to Newton's law: m a = − k x ⟹ a = − ( k m ) x m a = -k x \implies a = -\left(\frac{k}{m}\right)x ma = − k x ⟹ a = − ( m k ) x .
Comparing with a = − ω 2 x a = -\omega^2 x a = − ω 2 x confirms that the angular frequency is:
ω = k m \omega = \sqrt{\frac{k}{m}} ω = m k
From ω = 2 π f = 2 π T \omega = 2\pi f = \frac{2\pi}{T} ω = 2 π f = T 2 π , the time period T T T and frequency f f f are:
T = 2 π m k , f = 1 2 π k m T = 2\pi \sqrt{\frac{m}{k}}, \qquad f = \frac{1}{2\pi}\sqrt{\frac{k}{m}} T = 2 π k m , f = 2 π 1 m k
Crucial ECAT Observations:
The time period depends solely on inertial mass m m m and elastic stiffness k k k .
T T T is completely independent of amplitude x 0 x_0 x 0 (isochronous property).
For a vertical mass-spring system , gravity stretches the spring to a new equilibrium extension x eq = m g k x_{\text{eq}} = \frac{mg}{k} x eq = k m g . The period about this new equilibrium remains completely unchanged: T = 2 π m k = 2 π x eq g T = 2\pi\sqrt{\frac{m}{k}} = 2\pi\sqrt{\frac{x_{\text{eq}}}{g}} T = 2 π k m = 2 π g x eq .
Combination of Springs
When multiple springs are coupled together, their effective spring constant k eq k_{\text{eq}} k eq dictates the resulting time period:
Series Combination (End-to-End):
Each spring experiences the identical tension force F F F .
Total displacement is the sum of individual extensions: x total = x 1 + x 2 x_{\text{total}} = x_1 + x_2 x total = x 1 + x 2 .
Since x = F / k x = F/k x = F / k , F k eq = F k 1 + F k 2 \frac{F}{k_{\text{eq}}} = \frac{F}{k_1} + \frac{F}{k_2} k eq F = k 1 F + k 2 F :
1 k eq = 1 k 1 + 1 k 2 ⟹ k eq = k 1 k 2 k 1 + k 2 \frac{1}{k_{\text{eq}}} = \frac{1}{k_1} + \frac{1}{k_2} \implies k_{\text{eq}} = \frac{k_1 k_2}{k_1 + k_2} k eq 1 = k 1 1 + k 2 1 ⟹ k eq = k 1 + k 2 k 1 k 2
For two identical springs ( k 1 = k 2 = k k_1 = k_2 = k k 1 = k 2 = k ):
k eq = k 2 ⟹ T series = 2 π m k / 2 = 2 T 0 k_{\text{eq}} = \frac{k}{2} \implies T_{\text{series}} = 2\pi\sqrt{\frac{m}{k/2}} = \sqrt{2} T_0 k eq = 2 k ⟹ T series = 2 π k /2 m = 2 T 0
Parallel Combination (Side-by-Side):
Both springs undergo identical displacement x x x .
Total restoring force is the sum of individual spring forces: F total = F 1 + F 2 = k 1 x + k 2 x F_{\text{total}} = F_1 + F_2 = k_1 x + k_2 x F total = F 1 + F 2 = k 1 x + k 2 x :
k eq = k 1 + k 2 k_{\text{eq}} = k_1 + k_2 k eq = k 1 + k 2
For two identical springs ( k 1 = k 2 = k k_1 = k_2 = k k 1 = k 2 = k ):
k eq = 2 k ⟹ T parallel = 2 π m 2 k = T 0 2 k_{\text{eq}} = 2k \implies T_{\text{parallel}} = 2\pi\sqrt{\frac{m}{2k}} = \frac{T_0}{\sqrt{2}} k eq = 2 k ⟹ T parallel = 2 π 2 k m = 2 T 0
Cutting a Spring:
The spring constant of a uniform spring is inversely proportional to its resting length: k ∝ 1 L ⟹ k L = constant k \propto \frac{1}{L} \implies k L = \text{constant} k ∝ L 1 ⟹ k L = constant .
If a spring of stiffness k k k and length L L L is cut into n n n equal segments, each segment has length L ′ = L / n L' = L/n L ′ = L / n , so its new spring constant is:
- k ′ = n k k' = n k k ′ = nk
- 3. The Simple Pendulum
- Dynamical Derivation for Small Angular Displacements
A simple pendulum consists of a small heavy bob of mass m m m suspended by a light, inextensible string of length l l l . Displacing the bob by a small angle θ \theta θ from the vertical:
Weight m g mg m g resolves into two components: m g cos θ mg\cos\theta m g cos θ along the string (balanced by string tension T string T_{\text{string}} T string ) and m g sin θ mg\sin\theta m g sin θ perpendicular to the string, acting as the restoring force toward equilibrium:
F restoring = − m g sin θ F_{\text{restoring}} = -m g \sin\theta F restoring = − m g sin θ
For small angular amplitudes (typically θ ≤ 10 ∘ ≈ 0.175 rad \theta \le 10^\circ \approx 0.175\text{ rad} θ ≤ 1 0 ∘ ≈ 0.175 rad ), the small-angle approximation sin θ ≈ θ \sin\theta \approx \theta sin θ ≈ θ applies. Expressing θ = x l \theta = \frac{x}{l} θ = l x (where x x x is linear arc displacement):
F = − m g ( x l ) = − ( m g l ) x F = -m g \left(\frac{x}{l}\right) = -\left(\frac{m g}{l}\right) x F = − m g ( l x ) = − ( l m g ) x
By Newton's second law ( F = m a F = m a F = ma ):
m a = − ( m g l ) x ⟹ a = − ( g l ) x m a = -\left(\frac{m g}{l}\right) x \implies a = -\left(\frac{g}{l}\right) x ma = − ( l m g ) x ⟹ a = − ( l g ) x
Comparing with the definition a = − ω 2 x a = -\omega^2 x a = − ω 2 x :
ω = g l \omega = \sqrt{\frac{g}{l}} ω = l g
The time period T T T and frequency f f f are therefore:
T = 2 π l g , f = 1 2 π g l T = 2\pi \sqrt{\frac{l}{g}}, \qquad f = \frac{1}{2\pi}\sqrt{\frac{g}{l}} T = 2 π g l , f = 2 π 1 l g
Key Laws of the Simple Pendulum for ECAT
Law of Length: T ∝ l T \propto \sqrt{l} T ∝ l . If pendulum length is quadrupled ( 4 l 4l 4 l ), the time period doubles ( 2 T 2T 2 T ).
Law of Gravity: T ∝ 1 g T \propto \frac{1}{\sqrt{g}} T ∝ g 1 . If gravitational acceleration decreases (e.g., atop a high mountain or on the Moon where g m = g / 6 g_m = g/6 g m = g /6 ), the period increases ( T moon = 6 T ≈ 2.45 T T_{\text{moon}} = \sqrt{6} T \approx 2.45 T T moon = 6 T ≈ 2.45 T ), causing the clock to run slow.
Law of Mass Independence: T T T is strictly independent of the mass m m m and material of the bob. Replacing an aluminum bob with a lead bob of identical dimensions leaves T T T unaltered.
Law of Isochronism: T T T is independent of angular amplitude θ \theta θ , provided θ \theta θ remains small ( θ ≤ 10 ∘ \theta \le 10^\circ θ ≤ 1 0 ∘ ).
The Second's Pendulum
A second's pendulum is defined as a pendulum whose half-period (time for one single tick from one extreme to the other) is exactly 1 second 1\text{ second} 1 second , corresponding to a full vibration time period of:
T = 2.0 s T = 2.0\text{ s} T = 2.0 s
To find its length on Earth's surface where g = 9.8 m ⋅ s − 2 g = 9.8\text{ m}\cdot\text{s}^{-2} g = 9.8 m ⋅ s − 2 :
T = 2 π l g ⟹ 2.0 = 2 π l 9.8 ⟹ 1 = π l 9.8 T = 2\pi\sqrt{\frac{l}{g}} \implies 2.0 = 2\pi\sqrt{\frac{l}{9.8}} \implies 1 = \pi\sqrt{\frac{l}{9.8}} T = 2 π g l ⟹ 2.0 = 2 π 9.8 l ⟹ 1 = π 9.8 l
l = 9.8 π 2 ≈ 9.80 9.87 ≈ 0.992 m = 99.2 cm ≈ 1.0 m l = \frac{9.8}{\pi^2} \approx \frac{9.80}{9.87} \approx 0.992\text{ m} = 99.2\text{ cm} \approx 1.0\text{ m} l = π 2 9.8 ≈ 9.87 9.80 ≈ 0.992 m = 99.2 cm ≈ 1.0 m
Pendulum in Non-Inertial Frames (Accelerated Systems)
If the suspension pivot of a simple pendulum undergoes linear acceleration a 0 \mathbf{a}_0 a 0 , an effective gravitational acceleration g eff = g − a 0 \mathbf{g}_{\text{eff}} = \mathbf{g} - \mathbf{a}_0 g eff = g − a 0 must be used:
Elevator accelerating upward with + a +a + a : g eff = g + a ⟹ T = 2 π l g + a g_{\text{eff}} = g + a \implies T = 2\pi\sqrt{\frac{l}{g+a}} g eff = g + a ⟹ T = 2 π g + a l (Period decreases, clock runs fast).
Elevator accelerating downward with − a -a − a : g eff = g − a ⟹ T = 2 π l g − a g_{\text{eff}} = g - a \implies T = 2\pi\sqrt{\frac{l}{g-a}} g eff = g − a ⟹ T = 2 π g − a l (Period increases, clock runs slow).
Freely Falling Elevator ( a = g a = g a = g ): g eff = g − g = 0 ⟹ T = 2 π l 0 → ∞ g_{\text{eff}} = g - g = 0 \implies T = 2\pi\sqrt{\frac{l}{0}} \to \infty g eff = g − g = 0 ⟹ T = 2 π 0 l → ∞ (Pendulum ceases oscillating).
Geostationary / Orbiting Satellite: Apparent weightlessness ( g eff = 0 g_{\text{eff}} = 0 g eff = 0 ) means T → ∞ T \to \infty T → ∞ ; a pendulum cannot tick inside an orbiting spacecraft.
Comparison of Classical Oscillating Systems
Parameter / Feature Horizontal Mass-Spring System Vertical Mass-Spring System Simple Pendulum Second's Pendulum
Restoring Agent Spring elasticity ( F = − k x F = -kx F = − k x ) Net elastic force ( F = − k x F = -kx F = − k x ) Tangential gravity component ( F = − m g sin θ F = -mg\sin\theta F = − m g sin θ ) Tangential gravity component ( F = − m g sin θ F = -mg\sin\theta F = − m g sin θ )
Inertial Factor Mass m m m Mass m m m Length l l l (independent of m m m ) Length l ≈ 0.992 m l \approx 0.992\text{ m} l ≈ 0.992 m (at g = 9.8 m ⋅ s − 2 g = 9.8\text{ m}\cdot\text{s}^{-2} g = 9.8 m ⋅ s − 2 )
Restoring / Elastic Factor Spring constant k k k Spring constant k k k Gravitational acceleration g g g Gravitational acceleration g g g
Angular Frequency ( ω \omega ω ) k m \sqrt{\frac{k}{m}} m k k m \sqrt{\frac{k}{m}} m k g l \sqrt{\frac{g}{l}} l g π rad ⋅ s − 1 \pi\text{ rad}\cdot\text{s}^{-1} π rad ⋅ s − 1
Time Period ( T T T ) 2 π m k 2\pi\sqrt{\frac{m}{k}} 2 π k m 2 π m k = 2 π x eq g 2\pi\sqrt{\frac{m}{k}} = 2\pi\sqrt{\frac{x_{\text{eq}}}{g}} 2 π k m = 2 π g x eq 2 π l g 2\pi\sqrt{\frac{l}{g}} 2 π g l Exactly 2.00 s 2.00\text{ s} 2.00 s
Frequency ( f f f ) 1 2 π k m \frac{1}{2\pi}\sqrt{\frac{k}{m}} 2 π 1 m k 1 2 π k m \frac{1}{2\pi}\sqrt{\frac{k}{m}} 2 π 1 m k 1 2 π g l \frac{1}{2\pi}\sqrt{\frac{g}{l}} 2 π 1 l g 0.50 Hz 0.50\text{ Hz} 0.50 Hz
Dependence on Amplitude Independent (isochronous) Independent (isochronous) Independent for small θ ≤ 10 ∘ \theta \le 10^\circ θ ≤ 1 0 ∘ Independent for small θ ≤ 10 ∘ \theta \le 10^\circ θ ≤ 1 0 ∘
Dependence on Gravity ( g g g ) Independent ( g g g has no effect) Independent ( T T T invariant; g g g shifts x eq x_{\text{eq}} x eq ) Inversely proportional ( T ∝ 1 / g T \propto 1/\sqrt{g} T ∝ 1/ g ) Inversely proportional ( T ∝ 1 / g T \propto 1/\sqrt{g} T ∝ 1/ g )
Behavior in Free Fall ( g eff = 0 g_{\text{eff}} = 0 g eff = 0 ) Oscillates normally ( T T T unchanged) Oscillates normally ( T T T unchanged) Ceases oscillating ( T → ∞ T \to \infty T → ∞ ) Ceases oscillating ( T → ∞ T \to \infty T → ∞ )
4. Energy Conservation and Partition in SHM
In an ideal undamped simple harmonic oscillator, total mechanical energy continuously transfers between kinetic energy ( K K K ) and potential energy ( U U U ), while their sum remains strictly constant.
Instantaneous Potential Energy ( U U U )
The work done against the restoring force F = k x F = kx F = k x to displace the mass from 0 to x x x is stored as elastic potential energy:
U = ∫ 0 x k x ′ d x ′ = 1 2 k x 2 U = \int_0^x kx' dx' = \frac{1}{2} k x^2 U = ∫ 0 x k x ′ d x ′ = 2 1 k x 2
Substituting x = x 0 sin ( ω t ) x = x_0 \sin(\omega t) x = x 0 sin ( ω t ) :
U ( t ) = 1 2 k x 0 2 sin 2 ( ω t ) U(t) = \frac{1}{2} k x_0^2 \sin^2(\omega t) U ( t ) = 2 1 k x 0 2 sin 2 ( ω t )
At the mean position ( x = 0 x = 0 x = 0 ): U min = 0 U_{\text{min}} = 0 U min = 0 .
At the extreme positions ( x = ± x 0 x = \pm x_0 x = ± x 0 ): U max = 1 2 k x 0 2 U_{\text{max}} = \frac{1}{2} k x_0^2 U max = 2 1 k x 0 2 .
Instantaneous Kinetic Energy ( K K K )
The kinetic energy of mass m m m moving with speed v = ω x 0 2 − x 2 v = \omega\sqrt{x_0^2 - x^2} v = ω x 0 2 − x 2 is:
K = 1 2 m v 2 = 1 2 m ω 2 ( x 0 2 − x 2 ) K = \frac{1}{2} m v^2 = \frac{1}{2} m \omega^2 (x_0^2 - x^2) K = 2 1 m v 2 = 2 1 m ω 2 ( x 0 2 − x 2 )
Recalling that k = m ω 2 k = m\omega^2 k = m ω 2 :
K = 1 2 k ( x 0 2 − x 2 ) K = \frac{1}{2} k (x_0^2 - x^2) K = 2 1 k ( x 0 2 − x 2 )
Substituting v = ω x 0 cos ( ω t ) v = \omega x_0 \cos(\omega t) v = ω x 0 cos ( ω t ) :
K ( t ) = 1 2 k x 0 2 cos 2 ( ω t ) K(t) = \frac{1}{2} k x_0^2 \cos^2(\omega t) K ( t ) = 2 1 k x 0 2 cos 2 ( ω t )
At the mean position ( x = 0 x = 0 x = 0 ): K max = 1 2 k x 0 2 K_{\text{max}} = \frac{1}{2} k x_0^2 K max = 2 1 k x 0 2 .
At the extreme positions ( x = ± x 0 x = \pm x_0 x = ± x 0 ): K min = 0 K_{\text{min}} = 0 K min = 0 .
Total Mechanical Energy ( E total E_{\text{total}} E total )
Summing kinetic and potential energies at any arbitrary displacement x x x :
E total = K + U = 1 2 k ( x 0 2 − x 2 ) + 1 2 k x 2 = 1 2 k x 0 2 = 1 2 m ω 2 x 0 2 = constant E_{\text{total}} = K + U = \frac{1}{2} k (x_0^2 - x^2) + \frac{1}{2} k x^2 = \frac{1}{2} k x_0^2 = \frac{1}{2} m \omega^2 x_0^2 = \text{constant} E total = K + U = 2 1 k ( x 0 2 − x 2 ) + 2 1 k x 2 = 2 1 k x 0 2 = 2 1 m ω 2 x 0 2 = constant
Total mechanical energy is proportional to the square of the amplitude ( E total ∝ x 0 2 E_{\text{total}} \propto x_0^2 E total ∝ x 0 2 ) and the square of the frequency ( E total ∝ f 2 E_{\text{total}} \propto f^2 E total ∝ f 2 ).
Specific Energy Partition Locations
Equipartition Location ( K = U K = U K = U ):
1 2 k ( x 0 2 − x 2 ) = 1 2 k x 2 ⟹ x 0 2 − x 2 = x 2 ⟹ 2 x 2 = x 0 2 \frac{1}{2} k (x_0^2 - x^2) = \frac{1}{2} k x^2 \implies x_0^2 - x^2 = x^2 \implies 2x^2 = x_0^2 2 1 k ( x 0 2 − x 2 ) = 2 1 k x 2 ⟹ x 0 2 − x 2 = x 2 ⟹ 2 x 2 = x 0 2
x = ± x 0 2 ≈ ± 0.707 x 0 x = \pm \frac{x_0}{\sqrt{2}} \approx \pm 0.707 x_0 x = ± 2 x 0 ≈ ± 0.707 x 0
Kinetic and potential energies are equal at approximately 70.7 % 70.7\% 70.7% of maximum displacement.
Midway Position ( x = x 0 / 2 x = x_0 / 2 x = x 0 /2 ):
Potential energy: U = 1 2 k ( x 0 / 2 ) 2 = 1 4 ( 1 2 k x 0 2 ) = 1 4 E total = 25 % U = \frac{1}{2} k (x_0/2)^2 = \frac{1}{4} \left(\frac{1}{2} k x_0^2\right) = \frac{1}{4} E_{\text{total}} = 25\% U = 2 1 k ( x 0 /2 ) 2 = 4 1 ( 2 1 k x 0 2 ) = 4 1 E total = 25% .
Kinetic energy: K = E total − U = 3 4 E total = 75 % K = E_{\text{total}} - U = \frac{3}{4} E_{\text{total}} = 75\% K = E total − U = 4 3 E total = 75% .
Ratio: K U = 3 \frac{K}{U} = 3 U K = 3 .
Frequency of Energy Oscillations:
Because sin 2 ( ω t ) = 1 − cos ( 2 ω t ) 2 \sin^2(\omega t) = \frac{1 - \cos(2\omega t)}{2} sin 2 ( ω t ) = 2 1 − c o s ( 2 ω t ) and cos 2 ( ω t ) = 1 + cos ( 2 ω t ) 2 \cos^2(\omega t) = \frac{1 + \cos(2\omega t)}{2} cos 2 ( ω t ) = 2 1 + c o s ( 2 ω t ) , both potential and kinetic energies oscillate with angular frequency ω E = 2 ω \omega_E = 2\omega ω E = 2 ω and frequency f E = 2 f f_E = 2f f E = 2 f .
In one complete cycle of motion, kinetic energy drops to zero twice and peaks twice.
- 5. Free, Damped, Forced Oscillations and Resonance
- Free vs Damped Oscillations
Free Oscillations: An isolated system oscillates exclusively under internal restoring forces without external excitation or dissipative resistance. It vibrates at its natural frequency f 0 f_0 f 0 with permanent constant amplitude.
Damped Oscillations: Real oscillators encounter dissipative viscous drag or mechanical friction, transferring mechanical energy into thermal energy. The equation of motion includes a damping term b d x d t b\frac{dx}{dt} b d t d x :
m d 2 x d t 2 + b d x d t + k x = 0 m\frac{d^2 x}{dt^2} + b\frac{dx}{dt} + kx = 0 m d t 2 d 2 x + b d t d x + k x = 0
Three Damping Regimes:
Underdamping ( b < 2 k m b < 2\sqrt{km} b < 2 km ): The system oscillates with an amplitude decaying exponentially over time: x ( t ) = x 0 e − γ t cos ( ω ′ t ) x(t) = x_0 e^{-\gamma t} \cos(\omega' t) x ( t ) = x 0 e − γ t cos ( ω ′ t ) .
Critical Damping ( b = 2 k m b = 2\sqrt{km} b = 2 km ): The system returns to equilibrium in the minimum possible time without completing a single oscillation. Practical applications: shock absorbers in automobiles, dead-beat pointer galvanometers.
Overdamping ( b > 2 k m b > 2\sqrt{km} b > 2 km ): The system slowly creeps back to equilibrium without oscillating, hindered by heavy resistance (e.g., deep oil dashpots, automatic door closers).
Forced Oscillations and Resonance
When an oscillating system is driven by a periodic external force F ( t ) = F 0 cos ( ω drive t ) F(t) = F_0 \cos(\omega_{\text{drive}} t) F ( t ) = F 0 cos ( ω drive t ) , it initially exhibits transient behavior and subsequently settles into steady-state motion vibrating at the driving frequency ω drive \omega_{\text{drive}} ω drive .
Resonance Phenomenon
Resonance occurs when the driving frequency precisely matches the natural undamped frequency of the oscillating system:
f drive = f 0 f_{\text{drive}} = f_0 f drive = f 0
Under this resonance condition:
The rate of energy absorption from the external driver reaches its absolute maximum.
The oscillation amplitude reaches a pronounced peak.
The phase difference between the driving force and displacement is exactly π 2 rad \frac{\pi}{2}\text{ rad} 2 π rad ( 90 ∘ 90^\circ 9 0 ∘ ).
Sharpness of Resonance
The profile of the amplitude vs driving frequency response curve depends on the degree of damping:
Small Damping (Low Friction): Yields a high, narrow, sharp resonance peak . The system is highly selective (e.g., LC radio tuning circuits picking up a distinct transmission frequency).
Large Damping (High Friction): Yields a low, broad, flat resonance peak . The amplitude remains modest over a wide frequency band.
Practical Engineering and Physical Manifestations of Resonance
Radio and Television Tuning: Variable air capacitors or varactor diodes alter capacitance C C C , shifting the electrical natural frequency f 0 = 1 2 π L C f_0 = \frac{1}{2\pi\sqrt{LC}} f 0 = 2 π L C 1 until it resonates with a targeted broadcast station's carrier wave.
Microwave Cooking: Microwave ovens radiate electromagnetic waves at 2.45 GHz 2.45\text{ GHz} 2.45 GHz . Textbooks often cite this as resonance with water molecules; strictly, food is heated by dielectric loss as polar water molecules repeatedly try to realign with the oscillating field.
Magnetic Resonance Imaging (MRI): Strong magnetic fields align hydrogen nuclear spins, which are excited by resonant radiofrequency pulses to produce cross-sectional clinical imaging.
Destructive Mechanical Resonance: Marching soldiers break step across suspension bridges to prevent periodic footfalls from matching the bridge's natural fundamental vibration modes, which could induce destructive high-amplitude structural oscillations.