Study guide

12.5 Kinetic Theory of Gases, First Law, Heat Engines & Carnot Cycle

Pakistan ECAT Engineering Colleges Admission Test

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: ECAT Exam Structure, Scoring & Strategy

1.1 ECAT Exam Pattern, Scoring Scheme & UET Merit Aggregate 1.2 Time Management, Pacing & MCQ Problem-Solving Tactics

2 Chapter 2: Mathematics — Number Systems, Sets & Algebra

2.1 Real Numbers, Sets, Logic, Binary Operations & Groups 2.2 Complex Numbers, Modulus, Conjugates & De Moivre's Theorem 2.3 Matrices, Determinants, Inverses & Systems of Linear Equations 2.4 Quadratic Equations, Relations Between Roots & Factor/Remainder Theorems

3 Chapter 3: Mathematics — Sequences, Series & Combinatorics

3.1 Arithmetic, Geometric & Harmonic Progressions (AP, GP, HP) 3.2 Permutations, Combinations & Probability Distributions 3.3 Mathematical Induction & the Binomial Theorem

4 Chapter 4: Mathematics — Trigonometry & Trigonometric Equations

4.1 Fundamental Trigonometric Identities & Angle Addition Formulas 4.2 Graphs of Trigonometric Functions & Inverse Trigonometric Functions 4.3 Solutions of Triangles (Sine/Cosine Laws) & Trigonometric Equations

5 Chapter 5: Mathematics — Functions, Limits & Continuity

5.1 Real-Valued Functions, Types, Domains & Ranges 5.2 Limits of Functions, Indeterminate Forms & Squeeze Theorem 5.3 Continuity, Types of Discontinuity & Asymptotes

6 Chapter 6: Mathematics — Differential Calculus

6.1 Definition of Derivative, Power, Product, Quotient & Chain Rules 6.2 Derivatives of Trigonometric, Exponential & Logarithmic Functions 6.3 Implicit Differentiation, Parametric Equations & Higher-Order Derivatives 6.4 Tangents, Normals, Increasing/Decreasing Functions & Extrema

7 Chapter 7: Mathematics — Integral Calculus

7.1 Indefinite Integration Formulas & Integration by Substitution 7.2 Integration by Parts & Partial Fractions 7.3 Definite Integrals, Properties & Fundamental Theorem of Calculus 7.4 Area Under Curves & First-Order Differential Equations

8 Chapter 8: Mathematics — Analytic Geometry, Linear Programming & Vectors

8.1 Coordinates, Slopes, Straight Line Equations & Distances 8.2 Linear Inequalities & Linear Programming 8.3 Circle Equations, Tangents, Normals & Intersections 8.4 Conic Sections: Parabola, Ellipse & Hyperbola Characteristics 8.5 Vectors in 2D and 3D, Dot Product, Cross Product & Scalar Triple Product

9 Chapter 9: Physics — Measurements, Vectors & Equilibrium

9.1 Physical Quantities, SI Units, Errors & Dimensional Analysis 9.2 Vector Addition, Components, Scalar & Vector Products in Physics 9.3 Equilibrium Conditions, Torque & Rotational Equilibrium

10 Chapter 10: Physics — Kinematics, Dynamics & Energy

10.1 Kinematics: Displacement, Velocity, Acceleration & Motion Equations 10.2 Newton's Laws of Motion, Momentum, Impulse & Elastic Collisions 10.3 Projectile Motion: Trajectory, Height, Flight Time & Range 10.4 Work, Energy, Work-Energy Theorem, Conservative Forces & Power

11 Chapter 11: Physics — Circular Motion, Gravitation, Fluids & Oscillations

11.1 Uniform Circular Motion, Centripetal Force & Moment of Inertia 11.2 Gravitation, Escape Velocity, Satellites & Weightlessness 11.3 Viscosity, Drag Force, Equation of Continuity & Bernoulli's Principle 11.4 Simple Harmonic Motion (SHM), Pendulum, Mass-Spring & Resonance

12 Chapter 12: Physics — Waves, Optics, Optical Instruments & Thermodynamics

12.1 Waves, Speed of Sound, Standing Waves & Doppler Effect 12.2 Wave Theory of Light, Interference & Young's Double-Slit Experiment 12.3 Diffraction Grating, Resolving Power & Polarization of Light 12.4 Optical Instruments: Magnifiers, Microscopes, Telescopes, Spectrometer & Fibre Optics 12.5 Kinetic Theory of Gases, First Law, Heat Engines & Carnot Cycle

13 Chapter 13: Physics — Electrostatics, Current Electricity & Electromagnetism

13.1 Coulomb's Law, Electric Fields, Gauss's Law & Capacitors 13.2 Electric Current, Resistance, Ohm's Law, Kirchhoff's Rules & Potentiometer 13.3 Magnetic Fields, Ampere's Law, Faraday's Law, Lenz's Law & Transformers

14 Chapter 14: Physics — Alternating Current, Physics of Solids & Electronics

14.1 Alternating Current: RMS Values, Reactance, Impedance, Resonance & Power 14.2 Physics of Solids: Elasticity, Band Theory, Superconductors & Magnetic Materials 14.3 Electronics: p-n Junction, Rectifiers, Transistors, Op-Amps & Logic Gates

15 Chapter 15: Physics — Modern, Atomic & Nuclear Physics

15.1 Special Relativity, Mass–Energy Equivalence, Pair Production & Annihilation 15.2 Photoelectric Effect, Photons, Atomic Spectra, X-Rays & Nuclear Reactions 15.3 Lasers, Nuclear Reactors, Radiation Detectors, Dosimetry & Elementary Particles

16 Chapter 16: Chemistry — Basic Concepts, Atomic Structure, Bonding & States of Matter

16.1 Mole Concept, Stoichiometry, Limiting Reactants, Isotopes & Experimental Techniques 16.2 Atomic Structure, Bohr's Model, Quantum Numbers & Electronic Configurations 16.3 Chemical Bonding: Ionic, Covalent & Coordinate Bonds, VSEPR, Hybridization & MOT 16.4 Gas Laws, Ideal Gas Equation, Kinetic Molecular Theory & Real Gases 16.5 Liquids, Intermolecular Forces, Hydrogen Bonding & Crystal Lattices

17 Chapter 17: Chemistry — Energetics, Equilibrium & Kinetics

17.1 Enthalpy Changes, Calorimetry, Hess's Law & Born-Haber Cycle 17.2 Reversible Reactions, Equilibrium Constants (Kc, Kp), Le Chatelier & Ksp 17.3 Solutions, Concentration Units, Colligative Properties & Raoult's Law 17.4 Reaction Rates, Rate Equations, Order of Reaction & Activation Energy

18 Chapter 18: Chemistry — Periodic Trends, s-, p- & d-Block Elements & Electrochemistry

18.1 Periodic Trends: Atomic Radii, Ionization Energies & Electronegativities 18.2 Chemistry of s-Block and p-Block Elements (Groups I, II, III, IV, VII) 18.3 Groups V-A & VI-A: Nitrogen, Phosphorus, Oxygen & Sulphur Compounds 18.4 Transition Elements: Electronic Configurations, Complexes & Colors 18.5 Oxidation Numbers, Electrochemical Cells, Standard Potentials & Batteries

19 Chapter 19: Chemistry — Organic Chemistry & Reaction Mechanisms

19.1 Organic Functional Groups, IUPAC Nomenclature & Structural/Stereoisomerism 19.2 Aliphatic Hydrocarbons: Alkanes, Alkenes, Alkynes & Addition Reactions 19.3 Benzene: Electronic Structure, Resonance Stability & Electrophilic Substitution 19.4 Alkyl Halides (SN1/SN2), Grignard Reagents & Functional-Group Tests 19.5 Alcohols, Phenols & Ethers: Preparation and Reactions 19.6 Aldehydes, Ketones, Carboxylic Acids, Acid Derivatives & Amino Acids

20 Chapter 20: Chemistry — Macromolecules, Chemical Industries & Environment

20.1 Macromolecules: Polymers, Carbohydrates, Proteins, Lipids, Enzymes & Nucleic Acids 20.2 Chemical Industries in Pakistan & Environmental Chemistry

21 Chapter 21: English — Reading Comprehension, Vocabulary & Grammar

21.1 Reading Comprehension Strategies, Main Ideas, Inferences & Tone 21.2 Academic Vocabulary, Context Clues, Synonyms & Antonyms 21.3 Subject-Verb Agreement, Tenses & Grammatical Concord 21.4 Sentence Correction, Parallelism, Modifiers & Prepositions

12.5 Kinetic Theory of Gases, First Law, Heat Engines & Carnot Cycle

Key Takeaways Explain This Topic AI

Kinetic theory models gas pressure as the microscopic time-rate of momentum transfer from molecular wall collisions, deriving P = 1 3 ρ ⟨ v 2 ⟩ = 2 3 N 0 ⟨ 1 2 m v 2 ⟩ P = \frac{1}{3}\rho \langle v^2 \rangle = \frac{2}{3} N_0 \langle \frac{1}{2}mv^2 \rangle P = 3 1 ​ ρ ⟨ v 2 ⟩ = 3 2 ​ N 0 ​ ⟨ 2 1 ​ m v 2 ⟩ , proving absolute temperature is directly proportional to mean translational kinetic energy ( T ∝ ⟨ K . E . ⟩ T \propto \langle K.E. \rangle T ∝ ⟨ K . E . ⟩ ).

The First Law of Thermodynamics ( Q = Δ U + W Q = \Delta U + W Q = Δ U + W ) formalizes energy conservation: for an ideal gas, internal energy depends solely on temperature ( Δ U = n C v Δ T \Delta U = n C_v \Delta T Δ U = n C v ​ Δ T ), meaning Δ U = 0 \Delta U = 0 Δ U = 0 for isothermal paths ( Q = W = n R T ln ⁡ V 2 V 1 Q = W = nRT\ln\frac{V_2}{V_1} Q = W = n RT ln V 1 ​ V 2 ​ ​ ) and Q = 0 Q = 0 Q = 0 for adiabatic paths ( W = − Δ U W = -\Delta U W = − Δ U , P V γ = constant P V^\gamma = \text{constant} P V γ = constant ).

Molar heat capacity at constant pressure exceeds constant volume capacity by the work of expansion against external pressure ( C p − C v = R C_p - C_v = R C p ​ − C v ​ = R ), giving the adiabatic index γ = C p C v \gamma = \frac{C_p}{C_v} γ = C v ​ C p ​ ​ ( 1.67 1.67 1.67 for monatomic, 1.40 1.40 1.40 for diatomic gases).

The Carnot cycle comprises four reversible stages (two isotherms and two adiabatics), establishing the theoretical upper limit of heat engine efficiency η C = 1 − T C T H \eta_C = 1 - \frac{T_C}{T_H} η C ​ = 1 − T H ​ T C ​ ​ ; no engine operating between the same two temperatures can exceed this efficiency.

The Second Law of Thermodynamics (Kelvin-Planck engine limit and Clausius refrigerator limit) establishes the thermodynamic arrow of time, formalizing that the total entropy of an isolated system never decreases: it increases in every real (irreversible) process and stays constant only in an idealized reversible one ( Δ S ≥ 0 \Delta S \ge 0 Δ S ≥ 0 ).

Last updated: October 2026

Kinetic Theory of Gases, First Law, Heat Engines & Carnot Cycle

In the Intermediate Physics Part I syllabus and the UET ECAT entry test, heat and thermodynamics represent a core mechanical domain. Entry test questions frequently test work done in thermodynamic cycles, adiabatic relations, molar specific heat derivations ( C p − C v = R C_p - C_v = R C p ​ − C v ​ = R ), Carnot efficiency limits, refrigerator coefficient of performance, and entropy changes under timed conditions. Developing strong analytical fluency across microscopic kinetic theory and macroscopic classical thermodynamics is vital.

1. Postulates of the Kinetic Theory of Gases

The kinetic molecular theory models macroscopic gas behavior in terms of the statistical Newtonian mechanics of microscopic particles. The fundamental postulates are:

Point Particles: A finite volume of gas consists of an enormous number of identical molecules whose individual molecular volumes are negligible compared to the total volume occupied by the gas.

Continuous Random Motion: Gas molecules are in constant, chaotic, straight-line motion in all directions, continually colliding with one another and the container walls.

Elastic Collisions: Collisions between molecules and against container walls are perfectly elastic; linear momentum and kinetic energy are conserved, and collision durations are negligible compared to the time between collisions.

Negligible Intermolecular Forces: Except during instantaneous collisions, molecules exert no attractive or repulsive intermolecular forces on one another (potential energy is zero; internal energy is purely kinetic).

Classical Mechanics Validity: Newton's laws of motion apply directly to molecular dynamics, and molecular velocities obey Maxwell-Boltzmann statistical distributions.

2. Microscopic Derivation of Gas Pressure

Consider an ideal gas of N N N identical molecules, each of mass m m m , enclosed in a cubical container of side length L L L and volume V = L 3 V = L^3 V = L 3 .

Let a molecule move with velocity v 1 = ( v 1 x , v 1 y , v 1 z ) \mathbf{v}_1 = (v_{1x}, v_{1y}, v_{1z}) v 1 ​ = ( v 1 x ​ , v 1 y ​ , v 1 z ​ ) toward a wall perpendicular to the x x x -axis:

Upon an elastic collision with the wall, its x x x -component of velocity reverses from + v 1 x +v_{1x} + v 1 x ​ to − v 1 x -v_{1x} − v 1 x ​ , while y y y and z z z components remain unchanged.

The change in momentum per collision is:

Δ p x = ( − m v 1 x ) − ( m v 1 x ) = − 2 m v 1 x \Delta p_x = (-m v_{1x}) - (m v_{1x}) = -2m v_{1x} Δ p x ​ = ( − m v 1 x ​ ) − ( m v 1 x ​ ) = − 2 m v 1 x ​

By Newton's third law, the momentum imparted to the wall is + 2 m v 1 x +2m v_{1x} + 2 m v 1 x ​ .

The time interval between successive collisions of this molecule with the same wall is the round-trip time:

Δ t = 2 L v 1 x \Delta t = \frac{2L}{v_{1x}} Δ t = v 1 x ​ 2 L ​

By Newton's second law, the time-averaged force exerted by this single molecule on the wall is:

F 1 x = Δ p Δ t = 2 m v 1 x 2 L / v 1 x = m v 1 x 2 L F_{1x} = \frac{\Delta p}{\Delta t} = \frac{2m v_{1x}}{2L / v_{1x}} = \frac{m v_{1x}^2}{L} F 1 x ​ = Δ t Δ p ​ = 2 L / v 1 x ​ 2 m v 1 x ​ ​ = L m v 1 x 2 ​ ​

The total force exerted on the wall by all N N N molecules is the sum of individual contributions:

F x = ∑ i = 1 N m v i x 2 L = m L ∑ i = 1 N v i x 2 = m N L ⟨ v x 2 ⟩ F_x = \sum_{i=1}^N \frac{m v_{ix}^2}{L} = \frac{m}{L} \sum_{i=1}^N v_{ix}^2 = \frac{m N}{L} \langle v_x^2 \rangle F x ​ = ∑ i = 1 N ​ L m v i x 2 ​ ​ = L m ​ ∑ i = 1 N ​ v i x 2 ​ = L m N ​ ⟨ v x 2 ​ ⟩

where ⟨ v x 2 ⟩ = 1 N ∑ v i x 2 \langle v_x^2 \rangle = \frac{1}{N}\sum v_{ix}^2 ⟨ v x 2 ​ ⟩ = N 1 ​ ∑ v i x 2 ​ is the mean-square velocity along the x x x -axis.

Pressure is force divided by wall area A = L 2 A = L^2 A = L 2 :

P = F x L 2 = m N L 3 ⟨ v x 2 ⟩ = m N V ⟨ v x 2 ⟩ P = \frac{F_x}{L^2} = \frac{m N}{L^3} \langle v_x^2 \rangle = \frac{m N}{V} \langle v_x^2 \rangle P = L 2 F x ​ ​ = L 3 m N ​ ⟨ v x 2 ​ ⟩ = V m N ​ ⟨ v x 2 ​ ⟩

Because molecular motion is isotropic (equally distributed along all spatial directions):

⟨ v x 2 ⟩ = ⟨ v y 2 ⟩ = ⟨ v z 2 ⟩ = 1 3 ⟨ v 2 ⟩ \langle v_x^2 \rangle = \langle v_y^2 \rangle = \langle v_z^2 \rangle = \frac{1}{3}\langle v^2 \rangle ⟨ v x 2 ​ ⟩ = ⟨ v y 2 ​ ⟩ = ⟨ v z 2 ​ ⟩ = 3 1 ​ ⟨ v 2 ⟩

Substituting this isotropy condition yields the fundamental kinetic pressure equation :

P = 1 3 m N V ⟨ v 2 ⟩ = 1 3 ρ ⟨ v 2 ⟩ P = \frac{1}{3}\frac{m N}{V}\langle v^2 \rangle = \frac{1}{3}\rho \langle v^2 \rangle P = 3 1 ​ V m N ​ ⟨ v 2 ⟩ = 3 1 ​ ρ ⟨ v 2 ⟩

where ρ = m N V \rho = \frac{m N}{V} ρ = V m N ​ is the mass density of the gas.

3. Kinetic Interpretation of Temperature & RMS Speed

Multiplying the pressure equation by volume V V V :

P V = 2 3 N ( 1 2 m ⟨ v 2 ⟩ ) = 2 3 N ⟨ K . E . ⟩ P V = \frac{2}{3} N \left(\frac{1}{2}m \langle v^2 \rangle\right) = \frac{2}{3} N \langle K.E. \rangle P V = 3 2 ​ N ( 2 1 ​ m ⟨ v 2 ⟩ ) = 3 2 ​ N ⟨ K . E . ⟩

Comparing this with the macroscopic Ideal Gas Law P V = N k B T P V = N k_B T P V = N k B ​ T (where k B = 1.38 × 10 − 23 J/K k_B = 1.38 \times 10^{-23}\text{ J/K} k B ​ = 1.38 × 1 0 − 23 J/K is the Boltzmann constant):

N k B T = 2 3 N ⟨ K . E . ⟩ ⟹ ⟨ K . E . ⟩ = 1 2 m ⟨ v 2 ⟩ = 3 2 k B T N k_B T = \frac{2}{3} N \langle K.E. \rangle \implies \langle K.E. \rangle = \frac{1}{2}m \langle v^2 \rangle = \frac{3}{2} k_B T N k B ​ T = 3 2 ​ N ⟨ K . E . ⟩ ⟹ ⟨ K . E . ⟩ = 2 1 ​ m ⟨ v 2 ⟩ = 2 3 ​ k B ​ T

ECAT Foundational Insight: The absolute thermodynamic temperature T T T of an ideal gas is directly proportional to the average translational kinetic energy of its molecules: T ∝ ⟨ K . E . ⟩ T \propto \langle K.E. \rangle T ∝ ⟨ K . E . ⟩ Absolute zero ( T = 0 K = − 273.15 ∘ C T = 0\text{ K} = -273.15^\circ\text{C} T = 0 K = − 273.1 5 ∘ C ) corresponds to the theoretical state where all molecular translational motion ceases.

Root-Mean-Square (RMS) Speed

The root-mean-square velocity v rms v_{\text{rms}} v rms ​ is defined as the square root of the mean-square velocity:

v rms = ⟨ v 2 ⟩ = 3 k B T m = 3 R T M = 3 P ρ v_{\text{rms}} = \sqrt{\langle v^2 \rangle} = \sqrt{\frac{3 k_B T}{m}} = \sqrt{\frac{3 R T}{M}} = \sqrt{\frac{3 P}{\rho}} v rms ​ = ⟨ v 2 ⟩ ​ = m 3 k B ​ T ​ ​ = M 3 RT ​ ​ = ρ 3 P ​ ​

where M = m N A M = m N_A M = m N A ​ is the molar mass of the gas and R = N A k B = 8.314 J / ( mol ⋅ K ) R = N_A k_B = 8.314\text{ J}/(\text{mol}\cdot\text{K}) R = N A ​ k B ​ = 8.314 J / ( mol ⋅ K ) is the universal gas constant.

Dependence on Temperature: v rms ∝ T v_{\text{rms}} \propto \sqrt{T} v rms ​ ∝ T ​ (quadrupling absolute temperature doubles RMS speed).

Dependence on Molar Mass: v rms ∝ 1 M v_{\text{rms}} \propto \frac{1}{\sqrt{M}} v rms ​ ∝ M ​ 1 ​ (at identical temperature, light hydrogen molecules H 2 \text{H}_2 H 2 ​ move four times faster on average than oxygen molecules O 2 \text{O}_2 O 2 ​ ).

4. The First Law of Thermodynamics

The First Law of Thermodynamics is the universal principle of conservation of energy applied to thermodynamic systems:

Q = Δ U + W Q = \Delta U + W Q = Δ U + W

In differential form: d Q = d U + d W = d U + P d V dQ = dU + dW = dU + P dV d Q = d U + d W = d U + P d V .

Standard Sign Conventions

Heat ( Q Q Q ):

Q > 0 Q > 0 Q > 0 (positive): Heat is absorbed/added to the system from surroundings.

Q < 0 Q < 0 Q < 0 (negative): Heat is released/rejected by the system to surroundings.

Work ( W W W ):

W > 0 W > 0 W > 0 (positive): Work is performed by the system on surroundings (expansion: d V > 0 dV > 0 d V > 0 ).

W < 0 W < 0 W < 0 (negative): Work is performed on the system by surroundings (compression: d V < 0 dV < 0 d V < 0 ).

Internal Energy Change ( Δ U \Delta U Δ U ):

Δ U > 0 \Delta U > 0 Δ U > 0 : Temperature increases.

Δ U < 0 \Delta U < 0 Δ U < 0 : Temperature decreases.

Internal Energy of an Ideal Gas

For an ideal gas with zero intermolecular forces, internal energy U U U depends strictly on temperature : U = U ( T ) U = U(T) U = U ( T ) (Joule's Law). For n n n moles of an ideal gas:

Δ U = n C v Δ T \Delta U = n C_v \Delta T Δ U = n C v ​ Δ T

Regardless of the path taken between two thermodynamic states, Δ U \Delta U Δ U is identical because internal energy is a state function .

  • 5. The Four Fundamental Thermodynamic Processes
  • 1. Isothermal Process ( T = constant T = \text{constant} T = constant )

A process occurring at constant temperature, typically carried out very slowly in a container with perfectly heat-conducting walls immersed in a thermal reservoir.

Governing Law: Boyle's Law ( P V = constant ⟹ P 1 V 1 = P 2 V 2 P V = \text{constant} \implies P_1 V_1 = P_2 V_2 P V = constant ⟹ P 1 ​ V 1 ​ = P 2 ​ V 2 ​ ).

Internal Energy Change: Because Δ T = 0 \Delta T = 0 Δ T = 0 , Δ U = 0 \Delta U = 0 Δ U = 0 .

First Law Formulation: Q = W Q = W Q = W .

Work Done:

W = ∫ V 1 V 2 P d V = ∫ V 1 V 2 n R T V d V = n R T ln ⁡ ( V 2 V 1 ) = n R T ln ⁡ ( P 1 P 2 ) W = \int_{V_1}^{V_2} P dV = \int_{V_1}^{V_2} \frac{nRT}{V} dV = nRT\ln\left(\frac{V_2}{V_1}\right) = nRT\ln\left(\frac{P_1}{P_2}\right) W = ∫ V 1 ​ V 2 ​ ​ P d V = ∫ V 1 ​ V 2 ​ ​ V n RT ​ d V = n RT ln ( V 1 ​ V 2 ​ ​ ) = n RT ln ( P 2 ​ P 1 ​ ​ )

Slope of P P P - V V V Curve:

P V = C ⟹ P d V + V d P = 0 ⟹ ( d P d V ) iso = − P V P V = C \implies P dV + V dP = 0 \implies \left(\frac{dP}{dV}\right)_{\text{iso}} = -\frac{P}{V} P V = C ⟹ P d V + V d P = 0 ⟹ ( d V d P ​ ) iso ​ = − V P ​

2. Isobaric Process ( P = constant P = \text{constant} P = constant )

A process occurring at constant pressure (e.g., heating gas inside a cylinder beneath a freely movable, weighted piston).

Governing Law: Charles's Law ( V T = constant \frac{V}{T} = \text{constant} T V ​ = constant ).

Work Done:

W = P Δ V = P ( V 2 − V 1 ) = n R Δ T = n R ( T 2 − T 1 ) W = P\Delta V = P(V_2 - V_1) = nR\Delta T = nR(T_2 - T_1) W = P Δ V = P ( V 2 ​ − V 1 ​ ) = n R Δ T = n R ( T 2 ​ − T 1 ​ )

Heat Transferred: Q = n C p Δ T Q = n C_p \Delta T Q = n C p ​ Δ T .

Internal Energy Change: Δ U = Q − W = n C p Δ T − n R Δ T = n ( C p − R ) Δ T = n C v Δ T \Delta U = Q - W = n C_p \Delta T - n R \Delta T = n(C_p - R)\Delta T = n C_v \Delta T Δ U = Q − W = n C p ​ Δ T − n R Δ T = n ( C p ​ − R ) Δ T = n C v ​ Δ T .

3. Isochoric (Isovolumetric) Process ( V = constant V = \text{constant} V = constant )

A process occurring at constant volume (e.g., heating gas inside a rigid closed container).

Governing Law: Gay-Lussac's Law ( P T = constant \frac{P}{T} = \text{constant} T P ​ = constant ).

Work Done: Because d V = 0 dV = 0 d V = 0 , W = 0 W = 0 W = 0 .

First Law Formulation:

Q = Δ U = n C v Δ T Q = \Delta U = n C_v \Delta T Q = Δ U = n C v ​ Δ T

All heat supplied goes entirely into raising internal energy and temperature.

4. Adiabatic Process ( Q = 0 Q = 0 Q = 0 )

A process in which no heat enters or leaves the system ( Q = 0 Q = 0 Q = 0 ). Realized either by encasing the gas in perfectly thermally insulated walls or by executing expansion/compression extremely rapidly.

First Law Formulation:

0 = Δ U + W ⟹ W = − Δ U = − n C v Δ T 0 = \Delta U + W \implies W = -\Delta U = -n C_v \Delta T 0 = Δ U + W ⟹ W = − Δ U = − n C v ​ Δ T

Adiabatic Expansion: The gas does positive work ( W > 0 W > 0 W > 0 ) strictly at the expense of its own internal energy ( Δ U < 0 \Delta U < 0 Δ U < 0 ); hence, the gas cools ( T 2 < T 1 T_2 < T_1 T 2 ​ < T 1 ​ ).

Adiabatic Compression: Work is done on the gas ( W < 0 W < 0 W < 0 ), increasing internal energy ( Δ U > 0 \Delta U > 0 Δ U > 0 ); hence, the gas heats up ( T 2 > T 1 T_2 > T_1 T 2 ​ > T 1 ​ ).

Adiabatic Equations of State:

P V γ = constant , T V γ − 1 = constant , T γ P 1 − γ = constant P V^\gamma = \text{constant}, \quad T V^{\gamma - 1} = \text{constant}, \quad T^\gamma P^{1-\gamma} = \text{constant} P V γ = constant , T V γ − 1 = constant , T γ P 1 − γ = constant

Work Done in Adiabatic Expansion:

W = P 1 V 1 − P 2 V 2 γ − 1 = n R ( T 1 − T 2 ) γ − 1 W = \frac{P_1 V_1 - P_2 V_2}{\gamma - 1} = \frac{nR(T_1 - T_2)}{\gamma - 1} W = γ − 1 P 1 ​ V 1 ​ − P 2 ​ V 2 ​ ​ = γ − 1 n R ( T 1 ​ − T 2 ​ ) ​

Slope of P P P - V V V Curve:

P V γ = C ⟹ γ P V γ − 1 d V + V γ d P = 0 ⟹ ( d P d V ) adia = − γ P V P V^\gamma = C \implies \gamma P V^{\gamma-1} dV + V^\gamma dP = 0 \implies \left(\frac{dP}{dV}\right)_{\text{adia}} = -\gamma\frac{P}{V} P V γ = C ⟹ γ P V γ − 1 d V + V γ d P = 0 ⟹ ( d V d P ​ ) adia ​ = − γ V P ​

ECAT Slope Rule: The adiabatic curve on a P P P - V V V indicator diagram is γ \gamma γ times steeper than the isothermal curve passing through the same state point: ( d P d V ) adia = γ ( d P d V ) iso \left(\frac{dP}{dV}\right)_{\text{adia}} = \gamma \left(\frac{dP}{dV}\right)_{\text{iso}} ( d V d P ​ ) adia ​ = γ ( d V d P ​ ) iso ​ .

6. Molar Heat Capacities: Mayer's Relation ( C p − C v = R C_p - C_v = R C p ​ − C v ​ = R )

The molar heat capacity of a gas is the amount of heat energy required to raise the temperature of one mole of gas by 1 K 1\text{ K} 1 K ( 1 ∘ C 1^\circ\text{C} 1 ∘ C ):

C = Q n Δ T C = \frac{Q}{n \Delta T} C = n Δ T Q ​

Molar Heat Capacity at Constant Volume ( C v C_v C v ​ ): Heat is added while volume is clamped ( W = 0 W = 0 W = 0 ). All heat increases internal energy: Q v = Δ U = n C v Δ T Q_v = \Delta U = n C_v \Delta T Q v ​ = Δ U = n C v ​ Δ T .

Molar Heat Capacity at Constant Pressure ( C p C_p C p ​ ): Heat is added while the gas expands at constant pressure, performing boundary work against external atmosphere ( W = P Δ V W = P\Delta V W = P Δ V ). Heat must supply both the internal energy rise and the boundary work: Q p = Δ U + W Q_p = \Delta U + W Q p ​ = Δ U + W .

Setting Q p = n C p Δ T Q_p = n C_p \Delta T Q p ​ = n C p ​ Δ T , Δ U = n C v Δ T \Delta U = n C_v \Delta T Δ U = n C v ​ Δ T , and W = P Δ V = n R Δ T W = P\Delta V = n R \Delta T W = P Δ V = n R Δ T :

n C p Δ T = n C v Δ T + n R Δ T ⟹ C p = C v + R n C_p \Delta T = n C_v \Delta T + n R \Delta T \implies C_p = C_v + R n C p ​ Δ T = n C v ​ Δ T + n R Δ T ⟹ C p ​ = C v ​ + R

C p − C v = R C_p - C_v = R C p ​ − C v ​ = R

This fundamental equation is Mayer's Relation . Because work is done during constant pressure expansion, C p C_p C p ​ is always strictly greater than C v C_v C v ​ .

Values of Heat Capacities for Gases

Molecular Atomicity Degrees of Freedom ( f f f ) C v = f 2 R C_v = \frac{f}{2}R C v ​ = 2 f ​ R C p = C v + R C_p = C_v + R C p ​ = C v ​ + R γ = C p C v \gamma = \frac{C_p}{C_v} γ = C v ​ C p ​ ​

Monatomic (He, Ne, Ar) 3 (translational) 3 2 R \frac{3}{2}R 2 3 ​ R 5 2 R \frac{5}{2}R 2 5 ​ R 5 3 ≈ 1.67 \frac{5}{3} \approx 1.67 3 5 ​ ≈ 1.67

Diatomic ( N 2 , O 2 , H 2 \text{N}_2, \text{O}_2, \text{H}_2 N 2 ​ , O 2 ​ , H 2 ​ ) 5 (3 trans + 2 rot) 5 2 R \frac{5}{2}R 2 5 ​ R 7 2 R \frac{7}{2}R 2 7 ​ R 7 5 = 1.40 \frac{7}{5} = 1.40 5 7 ​ = 1.40

Polyatomic ( CO 2 , CH 4 \text{CO}_2, \text{CH}_4 CO 2 ​ , CH 4 ​ ) 6 (3 trans + 3 rot) 3 R 3R 3 R 4 R 4R 4 R 4 3 ≈ 1.33 \frac{4}{3} \approx 1.33 3 4 ​ ≈ 1.33

7. Heat Engines and the Second Law of Thermodynamics

A heat engine is a mechanical device that operates in a thermodynamic cycle, absorbing heat Q H Q_H Q H ​ from a high-temperature reservoir ( T H T_H T H ​ ), converting a fraction into net mechanical work W W W , and discharging waste heat Q C Q_C Q C ​ to a low-temperature sink ( T C T_C T C ​ ).

Because the engine returns to its initial thermodynamic state after completing one cycle, cyclic internal energy change is zero: Δ U cycle = 0 \Delta U_{\text{cycle}} = 0 Δ U cycle ​ = 0 . By the First Law:

  • W = Q H − Q C W = Q_H - Q_C W = Q H ​ − Q C ​
  • Thermal Efficiency ( η \eta η )

The thermal efficiency η \eta η of a heat engine is defined as the ratio of net work output to total heat input:

η = W Q H = Q H − Q C Q H = 1 − Q C Q H \eta = \frac{W}{Q_H} = \frac{Q_H - Q_C}{Q_H} = 1 - \frac{Q_C}{Q_H} η = Q H ​ W ​ = Q H ​ Q H ​ − Q C ​ ​ = 1 − Q H ​ Q C ​ ​

The Second Law of Thermodynamics

While the First Law asserts energy conservation, the Second Law establishes the physical direction of spontaneous thermal processes:

Kelvin-Planck Statement (Engine Formulation): It is impossible to construct a cyclic heat engine whose sole effect is to absorb heat from a single thermal reservoir and convert it completely into mechanical work without rejecting any heat to a lower-temperature sink.

Implication: No heat engine can ever achieve 100 % 100\% 100% thermal efficiency ( η < 1 \eta < 1 η < 1 ). A cold sink is physically indispensable for continuous cyclic work production.

Clausius Statement (Refrigerator Formulation): It is impossible to construct a cyclic device whose sole effect is the transfer of heat from a lower-temperature body to a higher-temperature body without the consumption of external mechanical work.

Implication: Heat never flows spontaneously from cold to hot.

8. The Carnot Cycle and Carnot Engine

In 1824, the French engineer Sadi Carnot conceived an idealized, perfectly reversible cyclic heat engine that operates between two constant temperature reservoirs at T H T_H T H ​ and T C T_C T C ​ . The Carnot cycle consists of four successive reversible thermodynamic processes:

Process 1 → \to → 2: Reversible Isothermal Expansion at T H T_H T H ​

The cylinder is placed on the hot reservoir at T H T_H T H ​ .

Gas expands slowly from volume V 1 V_1 V 1 ​ to V 2 V_2 V 2 ​ , absorbing heat Q H = n R T H ln ⁡ ( V 2 V 1 ) Q_H = n R T_H \ln\left(\frac{V_2}{V_1}\right) Q H ​ = n R T H ​ ln ( V 1 ​ V 2 ​ ​ ) .

Temperature remains constant at T H T_H T H ​ ; Δ U 12 = 0 \Delta U_{12} = 0 Δ U 12 ​ = 0 ; positive work W 1 = Q H W_1 = Q_H W 1 ​ = Q H ​ is done by the gas.

Process 2 → \to → 3: Reversible Adiabatic Expansion ( T H → T C T_H \to T_C T H ​ → T C ​ )

The cylinder is placed on a perfectly insulating base ( Q = 0 Q = 0 Q = 0 ).

Gas expands from V 2 V_2 V 2 ​ to V 3 V_3 V 3 ​ , cooling from T H T_H T H ​ to T C T_C T C ​ .

Positive work W 2 = − Δ U 23 = n C v ( T H − T C ) W_2 = -\Delta U_{23} = n C_v (T_H - T_C) W 2 ​ = − Δ U 23 ​ = n C v ​ ( T H ​ − T C ​ ) is performed at the expense of internal energy.

Process 3 → \to → 4: Reversible Isothermal Compression at T C T_C T C ​

The cylinder is placed on the cold sink at T C T_C T C ​ .

Work is done on the gas, compressing it from V 3 V_3 V 3 ​ to V 4 V_4 V 4 ​ while rejecting heat Q C = n R T C ln ⁡ ( V 3 V 4 ) Q_C = n R T_C \ln\left(\frac{V_3}{V_4}\right) Q C ​ = n R T C ​ ln ( V 4 ​ V 3 ​ ​ ) .

Δ U 34 = 0 \Delta U_{34} = 0 Δ U 34 ​ = 0 ; negative work W 3 = − Q C W_3 = -Q_C W 3 ​ = − Q C ​ is performed.

Process 4 → \to → 1: Reversible Adiabatic Compression ( T C → T H T_C \to T_H T C ​ → T H ​ )

The cylinder is placed on the insulating base ( Q = 0 Q = 0 Q = 0 ).

Gas is compressed from V 4 V_4 V 4 ​ to initial volume V 1 V_1 V 1 ​ , heating from T C T_C T C ​ back to T H T_H T H ​ .

Negative work W 4 = − Δ U 41 = − n C v ( T H − T C ) W_4 = -\Delta U_{41} = -n C_v (T_H - T_C) W 4 ​ = − Δ U 41 ​ = − n C v ​ ( T H ​ − T C ​ ) restores the initial state.

Carnot Thermal Efficiency Formula

From the adiabatic state relations along paths 2 → 3 2 \to 3 2 → 3 and 4 → 1 4 \to 1 4 → 1 :

V 2 V 1 = V 3 V 4 ⟹ Q C Q H = T C T H \frac{V_2}{V_1} = \frac{V_3}{V_4} \implies \frac{Q_C}{Q_H} = \frac{T_C}{T_H} V 1 ​ V 2 ​ ​ = V 4 ​ V 3 ​ ​ ⟹ Q H ​ Q C ​ ​ = T H ​ T C ​ ​

Substituting this thermodynamic temperature ratio into the efficiency formula yields the Carnot Efficiency :

η C = 1 − T C T H = T H − T C T H \eta_C = 1 - \frac{T_C}{T_H} = \frac{T_H - T_C}{T_H} η C ​ = 1 − T H ​ T C ​ ​ = T H ​ T H ​ − T C ​ ​

where T H T_H T H ​ and T C T_C T C ​ must be expressed strictly in Kelvin .

Carnot's Theorem

No real heat engine operating between two specified heat reservoirs can be more efficient than a reversible Carnot engine operating between the same two reservoirs: η real < η Carnot \eta_{\text{real}} < \eta_{\text{Carnot}} η real ​ < η Carnot ​ .

All reversible engines operating between the same two temperatures possess identical efficiency, completely independent of the working substance.

ECAT Strategy Note: To maximize Carnot efficiency, increase T H T_H T H ​ as high as possible and decrease T C T_C T C ​ as low as possible. In practice, reducing sink temperature T C T_C T C ​ by a given number of degrees increases efficiency more than raising source temperature T H T_H T H ​ by the identical number of degrees.

9. Refrigerators, Heat Pumps and Coefficient of Performance (COP)

A refrigerator is a heat engine operated in reverse: external mechanical work W W W is supplied to extract heat Q C Q_C Q C ​ from a cold space and dump heat Q H = Q C + W Q_H = Q_C + W Q H ​ = Q C ​ + W into warmer surroundings.

Coefficient of Performance (COP)

Refrigerator COP ( β \beta β ): Ratio of desired cooling to required work input:

COP ref = Q C W = Q C Q H − Q C \text{COP}_{\text{ref}} = \frac{Q_C}{W} = \frac{Q_C}{Q_H - Q_C} COP ref ​ = W Q C ​ ​ = Q H ​ − Q C ​ Q C ​ ​

For an ideal Carnot refrigerator:

COP Carnot, ref = T C T H − T C \text{COP}_{\text{Carnot, ref}} = \frac{T_C}{T_H - T_C} COP Carnot, ref ​ = T H ​ − T C ​ T C ​ ​

Heat Pump COP: Ratio of heating delivered to required work input:

COP HP = Q H W = T H T H − T C = COP ref + 1 \text{COP}_{\text{HP}} = \frac{Q_H}{W} = \frac{T_H}{T_H - T_C} = \text{COP}_{\text{ref}} + 1 COP HP ​ = W Q H ​ ​ = T H ​ − T C ​ T H ​ ​ = COP ref ​ + 1

10. Concept of Entropy

In 1865, Rudolf Clausius introduced the state function entropy ( S S S ) to quantify the unavailability of thermal energy for mechanical work and the microscopic degree of molecular disorder.

Mathematical Formulation

For an infinitesimal reversible transfer of heat d Q rev dQ_{\text{rev}} d Q rev ​ at absolute temperature T T T :

d S = d Q rev T ⟹ Δ S = ∫ 1 2 d Q rev T dS = \frac{dQ_{\text{rev}}}{T} \implies \Delta S = \int_1^2 \frac{dQ_{\text{rev}}}{T} d S = T d Q rev ​ ​ ⟹ Δ S = ∫ 1 2 ​ T d Q rev ​ ​

SI Unit of Entropy: J / K \text{J}/\text{K} J / K (Joules per Kelvin).

For an isothermal heat transfer: Δ S = Q T \Delta S = \frac{Q}{T} Δ S = T Q ​ .

For an adiabatic reversible process ( d Q rev = 0 dQ_{\text{rev}} = 0 d Q rev ​ = 0 ): Δ S = 0 \Delta S = 0 Δ S = 0 (isentropic process).

Principle of Entropy Increase

In any real, spontaneous (irreversible) process, the total entropy of the universe (system plus surroundings) strictly increases:

Δ S universe = Δ S system + Δ S surroundings > 0 \Delta S_{\text{universe}} = \Delta S_{\text{system}} + \Delta S_{\text{surroundings}} > 0 Δ S universe ​ = Δ S system ​ + Δ S surroundings ​ > 0

Entropy remains constant only for idealized reversible cycles. This principle defines the thermodynamic arrow of time : natural macroscopic processes proceed unidirectionally toward states of greater probability, higher molecular chaos, and degraded energy availability.

11. Thermodynamic Processes Comparison Table

Thermodynamic Process Constant Condition Governing Ideal Gas Law Work Done ( W = ∫ P d V W = \int P dV W = ∫ P d V ) Heat Supplied ( Q Q Q ) Internal Energy Change ( Δ U \Delta U Δ U ) P P P - V V V Indicator Curve Slope

Isothermal T = constant T = \text{constant} T = constant ( Δ T = 0 \Delta T = 0 Δ T = 0 ) Boyle's Law: P V = constant P V = \text{constant} P V = constant W = n R T ln ⁡ ( V 2 V 1 ) W = n R T \ln\left(\frac{V_2}{V_1}\right) W = n RT ln ( V 1 ​ V 2 ​ ​ ) Q = W Q = W Q = W (all heat goes to work) Δ U = 0 \Delta U = 0 Δ U = 0 (internal energy invariant) ( d P d V ) = − P V \left(\frac{dP}{dV}\right) = -\frac{P}{V} ( d V d P ​ ) = − V P ​

Isobaric P = constant P = \text{constant} P = constant ( Δ P = 0 \Delta P = 0 Δ P = 0 ) Charles's Law: V T = constant \frac{V}{T} = \text{constant} T V ​ = constant W = P Δ V = n R Δ T W = P\Delta V = n R \Delta T W = P Δ V = n R Δ T Q = n C p Δ T Q = n C_p \Delta T Q = n C p ​ Δ T Δ U = n C v Δ T \Delta U = n C_v \Delta T Δ U = n C v ​ Δ T ( d P d V ) = 0 \left(\frac{dP}{dV}\right) = 0 ( d V d P ​ ) = 0 (horizontal line)

Isochoric (Isovolumetric) V = constant V = \text{constant} V = constant ( Δ V = 0 \Delta V = 0 Δ V = 0 ) Gay-Lussac's Law: P T = constant \frac{P}{T} = \text{constant} T P ​ = constant W = 0 W = 0 W = 0 (no boundary displacement) Q = Δ U Q = \Delta U Q = Δ U Δ U = n C v Δ T \Delta U = n C_v \Delta T Δ U = n C v ​ Δ T ( d P d V ) = ∞ \left(\frac{dP}{dV}\right) = \infty ( d V d P ​ ) = ∞ (vertical line)

Adiabatic Q = 0 Q = 0 Q = 0 (perfect thermal insulation) Poisson's Law: P V γ = constant P V^\gamma = \text{constant} P V γ = constant W = P 1 V 1 − P 2 V 2 γ − 1 = − Δ U W = \frac{P_1 V_1 - P_2 V_2}{\gamma - 1} = -\Delta U W = γ − 1 P 1 ​ V 1 ​ − P 2 ​ V 2 ​ ​ = − Δ U Q = 0 Q = 0 Q = 0 (no thermal exchange) Δ U = − W = n C v Δ T \Delta U = -W = n C_v \Delta T Δ U = − W = n C v ​ Δ T ( d P d V ) = − γ P V \left(\frac{dP}{dV}\right) = -\gamma\frac{P}{V} ( d V d P ​ ) = − γ V P ​ ( γ \gamma γ times steeper than isothermal)

12. Petrol and Diesel Engines

Both are internal-combustion heat engines, so both are limited by the second law.

  • Feature Four-stroke petrol engine Diesel engine
  • Strokes Intake, compression, power, exhaust Same four strokes
  • What is compressed Air–fuel mixture Air only
  • Ignition Spark plug Heat of compression ignites injected fuel
  • Typical compression ratio About 8–12 About 15–22
  • Typical efficiency About 25–30% About 35–40%

The diesel's higher compression raises the air temperature enough to ignite the fuel and also raises the efficiency. Neither engine can reach the Carnot limit, because its working cycle is irreversible and heat must be rejected in the exhaust.

13. The Thermodynamic (Kelvin) Temperature Scale

Because the efficiency of a reversible (Carnot) engine depends only on the reservoir temperatures, Kelvin used the ratio of heats to define temperature independently of any thermometric substance:

Q c Q h = T c T h \frac{Q_c}{Q_h} = \frac{T_c}{T_h} Q h ​ Q c ​ ​ = T h ​ T c ​ ​

The scale was fixed by assigning 273.16 K 273.16\text{ K} 273.16 K to the triple point of water; since 2019 the kelvin has been defined by fixing the Boltzmann constant at k = 1.380649 × 10 − 23 J/K k = 1.380649 \times 10^{-23}\text{ J/K} k = 1.380649 × 1 0 − 23 J/K . Absolute zero is the temperature at which a reversible engine would reject no heat, which is why it can be approached but never reached.

Loading diagram... The Four Thermodynamic Stages of the Reversible Carnot Cycle