Study guide

11.3 Magnetism & Electromagnetic Induction

PAF Aeronautical Engineering Route Skills Review Exam

Track your progress as you read

Finished sections get a check mark.

1 Route & Official-Source Overview

1.1 What Is Officially Published 1.2 Eligibility & Registration 1.3 Initial Assessment, ISSB & NUST CAE

2 Verbal Reasoning

2.1 Analogies & Classification 2.2 Coding, Series & Direction Sense 2.3 Verbal Logic, Percentages & Vocabulary

3 Non-Verbal Reasoning

3.1 Pattern & Figure Series 3.2 Odd-One-Out & Matrix Reasoning 3.3 Spatial Rotation, Classification & Symbol Substitution

4 English Language

4.1 Grammar, Tenses & Prepositions 4.2 Active/Passive Voice & Sentence Correction 4.3 Technical Vocabulary, Spelling & Comprehension

5 Mathematics: Algebra & Functions

5.1 Number Systems, Sets & Functions 5.2 Equations, Inequalities & Quadratics 5.3 Sequences, Series & Logarithms

6 Mathematics: Matrices & Trigonometry

6.1 Matrices & Determinants 6.2 Trigonometric Identities & Equations 6.3 Trigonometry Applications

7 Mathematics: Geometry & Vectors

7.1 Analytic Geometry: Straight Lines 7.2 Conic Sections Basics 7.3 Vectors

8 Mathematics: Calculus & Probability

8.1 Differentiation 8.2 Integration & Applications 8.3 Probability, Permutations & Combinations

9 Physics: Mechanics

9.1 Units, Measurements & Kinematics 9.2 Newton’s Laws, Energy & Momentum 9.3 Circular Motion, Gravitation & SHM

10 Physics: Fluids & Thermodynamics

10.1 Fluid Mechanics 10.2 Heat, Temperature & Gas Laws 10.3 Laws of Thermodynamics

11 Physics: Electricity & Magnetism

11.1 Electrostatics 11.2 Current Electricity & Circuits 11.3 Magnetism & Electromagnetic Induction

12 Physics: Waves & Optics

12.1 Waves & Sound 12.2 Ray Optics 12.3 Wave Optics

13 Modern Physics, Aeronautical Context & Study Strategy

13.1 Modern & Nuclear Physics 13.2 Aeronautical Physics Applications 13.3 Independent Study & Official-Source Strategy

11.3 Magnetism & Electromagnetic Induction

Key Takeaways Explain This Topic AI

Magnetic force on a moving charge: F = qvB sinθ; on a current-carrying wire: F = ILB sinθ (right-hand rules for direction)

Magnetic flux Φ = BA cosθ; Faraday: induced EMF ε = −dΦ/dt; for a coil ε = −N dΦ/dt

Lenz's law: induced current opposes the change in flux that produces it (minus sign in Faraday's law)

Motional EMF in a rod: ε = Bℓv when B, length, and velocity are mutually perpendicular

AC idea: rotating coil in B-field produces sinusoidally varying EMF — basis of generators; transformers use mutual induction

Last updated: July 2026

11.3 Magnetism & Electromagnetic Induction

Quick Answer: Magnetic fields exert F = qvB sinθ on moving charges and F = ILB sinθ on wires. Changing magnetic flux induces EMF by Faraday's law, with direction fixed by Lenz's law. A rotating coil yields alternating EMF — the AC generator principle.

This magnetism review is application-first : forces, flux, induced EMF, and the conceptual AC story that powers aircraft electrical systems at a high level.

Magnetic Field and Force on a Moving Charge

A charge q q q moving with velocity v ⃗ \vec{v} v in magnetic field B ⃗ \vec{B} B experiences: F = q v B sin ⁡ θ F = qvB\sin\theta F = q v B sin θ

where θ is the angle between v ⃗ \vec{v} v and B ⃗ \vec{B} B . Unit of B: tesla (T) = N·s/(C·m). If v is parallel to B, F = 0; maximum force when v ⊥ B.

Direction (positive charge): right-hand rule — fingers in v ⃗ \vec{v} v direction, curl toward B ⃗ \vec{B} B , thumb gives F ⃗ \vec{F} F . Negate for negative charge (or use left hand).

Magnetic force is always perpendicular to velocity, so it changes direction of motion, not speed — kinetic energy is unchanged by magnetic force alone. Uniform B perpendicular to v → circular path; radius r = m v / ( q B ) r = mv/(qB) r = m v / ( qB ) for speed v.

Worked example — force on a charge. A proton (q = 1.6 × 10⁻¹⁹ C) moves at 2.0 × 10⁶ m/s perpendicular to B = 0.50 T. Find F. F = ( 1.6 × 10 − 19 ) ( 2.0 × 10 6 ) ( 0.50 ) sin ⁡ 90 ∘ = 1.6 × 10 − 13 N F = (1.6 \times 10^{-19})(2.0 \times 10^6)(0.50)\sin 90^\circ = 1.6 \times 10^{-13}\ \mathrm{N} F = ( 1.6 × 1 0 − 19 ) ( 2.0 × 1 0 6 ) ( 0.50 ) sin 9 0 ∘ = 1.6 × 1 0 − 13 N

Force on a Current-Carrying Conductor

For a straight wire of length L carrying current I in field B: F = I L B sin ⁡ θ F = ILB\sin\theta F = I L B sin θ

θ between current direction and B. Right-hand rule: fingers along I, curl to B, thumb along F.

Two parallel wires attract if currents are same direction , repel if opposite — definition route historically used for the ampere.

Worked example — wire force. A 25 cm wire carries 4.0 A perpendicular to B = 0.30 T. Find F. F = ( 4.0 ) ( 0.25 ) ( 0.30 ) = 0.30 N F = (4.0)(0.25)(0.30) = 0.30\ \mathrm{N} F = ( 4.0 ) ( 0.25 ) ( 0.30 ) = 0.30 N

  • Magnetic Flux
  • Magnetic flux through a surface: Φ = B A cos ⁡ θ \Phi = BA\cos\theta Φ = B A cos θ

where θ is the angle between B ⃗ \vec{B} B and the normal to the area A. Unit: weber (Wb) = T·m². Flux is maximum when B is perpendicular to the face (θ = 0 for the normal). For a coil of N turns, total flux linkage is N Φ N\Phi N Φ .

  • Symbol Meaning Unit
  • B Magnetic field T
  • Φ Magnetic flux Wb
  • ε Induced EMF V
  • N Number of turns —
  • ℓ Rod/wire length in motional EMF m
  • Faraday's Law and Lenz's Law

Faraday's law: induced EMF equals the negative rate of change of flux linkage: ε = − N d Φ d t \varepsilon = -N \frac{d\Phi}{dt} ε = − N d t d Φ ​

Flux can change by changing B, area A, or orientation θ (rotation).

Lenz's law: the induced current's magnetic effect opposes the change in flux that caused it. The minus sign encodes this. If flux into a loop is increasing into the page, induced current tries to create flux out of the page.

Precise phrasing: "oppose the change," not "oppose the field." If the external field is decreasing, induced current tries to maintain the field.

Worked example — Faraday. A 100-turn coil of area 0.010 m² has B perpendicular to the plane increasing from 0 to 0.40 T in 0.20 s. Find average induced EMF. Δ Φ = A Δ B = 0.010 × 0.40 = 4.0 × 10 − 3 W b \Delta\Phi = A\Delta B = 0.010 \times 0.40 = 4.0 \times 10^{-3}\ \mathrm{Wb} ΔΦ = A Δ B = 0.010 × 0.40 = 4.0 × 1 0 − 3 Wb ∣ ε ∣ = N Δ Φ Δ t = 100 4.0 × 10 − 3 0.20 = 2.0 V |\varepsilon| = N\frac{\Delta\Phi}{\Delta t} = 100\frac{4.0 \times 10^{-3}}{0.20} = 2.0\ \mathrm{V} ∣ ε ∣ = N Δ t ΔΦ ​ = 100 0.20 4.0 × 1 0 − 3 ​ = 2.0 V

Motional EMF

A conducting rod of length ℓ moving at speed v perpendicular to B (and to its length) has induced EMF: ε = B ℓ v \varepsilon = B\ell v ε = B ℓ v

Charges in the rod experience magnetic force until the electric field balances it. If the rod slides on rails forming a closed loop, induced current I = B ℓ v / R I = B\ell v / R I = B ℓ v / R and magnetic drag opposes the motion (Lenz again).

Worked example — motional EMF. B = 0.80 T, ℓ = 0.50 m, v = 2.0 m/s, all mutually perpendicular. Find ε. If circuit resistance is 0.40 Ω, find I. ε = ( 0.80 ) ( 0.50 ) ( 2.0 ) = 0.80 V , I = 0.80 / 0.40 = 2.0 A \varepsilon = (0.80)(0.50)(2.0) = 0.80\ \mathrm{V},\quad I = 0.80/0.40 = 2.0\ \mathrm{A} ε = ( 0.80 ) ( 0.50 ) ( 2.0 ) = 0.80 V , I = 0.80/0.40 = 2.0 A

AC Idea — Generators and Transformers

A coil rotating in a uniform magnetic field has flux Φ = B A cos ⁡ ( ω t ) \Phi = BA\cos(\omega t) Φ = B A cos ( ω t ) (depending on angle definition). Differentiating gives a sinusoidal EMF : ε = N B A ω sin ⁡ ( ω t ) \varepsilon = NBA\omega\sin(\omega t) ε = NB A ω sin ( ω t )

Peak EMF ε 0 = N B A ω \varepsilon_0 = NBA\omega ε 0 ​ = NB A ω . This is the principle of an AC generator (alternator). Aircraft electrical systems use AC generation extensively; at FSc depth you need the sinusoidal idea and that frequency relates to rotation rate and pole count, not a full machine-design treatment.

Transformers use mutual induction : changing current in a primary coil changes flux through a secondary. For an ideal transformer: V s V p = N s N p = I p I s \frac{V_s}{V_p} = \frac{N_s}{N_p} = \frac{I_p}{I_s} V p ​ V s ​ ​ = N p ​ N s ​ ​ = I s ​ I p ​ ​

Step-up: N s > N p N_s > N_p N s ​ > N p ​ raises voltage, lowers current for same power. Step-down: opposite. Core losses and non-ideal behaviour exist, but introductory exercises usually assume the ideal ratio.

Worked example — transformer. Primary 200 turns at 220 V; secondary needs 11 V. Find N_s (ideal). N s 200 = 11 220 ⇒ N s = 10 t u r n s \frac{N_s}{200} = \frac{11}{220} \Rightarrow N_s = 10\ \mathrm{turns} 200 N s ​ ​ = 220 11 ​ ⇒ N s ​ = 10 turns

Direction and Sign Checklist

  • Situation Tool
  • Force on + charge Right-hand rule (v, B → F)
  • Force on wire Right-hand rule (I, B → F)
  • Induced current sense Lenz: oppose flux change
  • Motional EMF magnitude ε = Bℓv when perpendicular
  • Bridging to Aeronautical Practice

Eddy currents in conducting airframe parts near changing fields dissipate heat — laminated cores in transformers reduce them. Lightning and static involve rapid electromagnetic phenomena; grounding and bonding again connect back to potential and current paths from earlier sections.

Section Checklist

Always check whether sinθ or cosθ is needed (force vs flux definition).

Average EMF uses ΔΦ/Δt; instantaneous uses dΦ/dt.

Lenz questions are qualitative — state the opposition clearly.

Generator EMF is AC because angle (hence flux) varies continuously with time.