Study guide
10.2 Heat, Temperature & Gas Laws
PAF Aeronautical Engineering Route Skills Review Exam
Track your progress as you read
Finished sections get a check mark.
1 Route & Official-Source Overview
1.1 What Is Officially Published 1.2 Eligibility & Registration 1.3 Initial Assessment, ISSB & NUST CAE
2 Verbal Reasoning
2.1 Analogies & Classification 2.2 Coding, Series & Direction Sense 2.3 Verbal Logic, Percentages & Vocabulary
3 Non-Verbal Reasoning
3.1 Pattern & Figure Series 3.2 Odd-One-Out & Matrix Reasoning 3.3 Spatial Rotation, Classification & Symbol Substitution
4 English Language
4.1 Grammar, Tenses & Prepositions 4.2 Active/Passive Voice & Sentence Correction 4.3 Technical Vocabulary, Spelling & Comprehension
5 Mathematics: Algebra & Functions
5.1 Number Systems, Sets & Functions 5.2 Equations, Inequalities & Quadratics 5.3 Sequences, Series & Logarithms
6 Mathematics: Matrices & Trigonometry
6.1 Matrices & Determinants 6.2 Trigonometric Identities & Equations 6.3 Trigonometry Applications
7 Mathematics: Geometry & Vectors
7.1 Analytic Geometry: Straight Lines 7.2 Conic Sections Basics 7.3 Vectors
8 Mathematics: Calculus & Probability
8.1 Differentiation 8.2 Integration & Applications 8.3 Probability, Permutations & Combinations
9 Physics: Mechanics
9.1 Units, Measurements & Kinematics 9.2 Newton’s Laws, Energy & Momentum 9.3 Circular Motion, Gravitation & SHM
10 Physics: Fluids & Thermodynamics
10.1 Fluid Mechanics 10.2 Heat, Temperature & Gas Laws 10.3 Laws of Thermodynamics
11 Physics: Electricity & Magnetism
11.1 Electrostatics 11.2 Current Electricity & Circuits 11.3 Magnetism & Electromagnetic Induction
12 Physics: Waves & Optics
12.1 Waves & Sound 12.2 Ray Optics 12.3 Wave Optics
13 Modern Physics, Aeronautical Context & Study Strategy
13.1 Modern & Nuclear Physics 13.2 Aeronautical Physics Applications 13.3 Independent Study & Official-Source Strategy
10.2 Heat, Temperature & Gas Laws
Key Takeaways Explain This Topic AI
Temperature measures average molecular kinetic energy; heat is energy transfer due to temperature difference (SI unit joule; calorie still appears in older texts)
Q = mcΔT for temperature change without phase change; Q = mL for melting/boiling at constant temperature (latent heat)
Ideal gas law: PV = nRT (or pV = NkT); absolute temperature must be in kelvin
Charles, Boyle, and Gay-Lussac laws are special cases of the ideal gas law with one variable held fixed
Aeronautical relevance: cabin/altitude pressure–temperature links, engine intake density, tire and strut gas behavior, and ISA temperature lapse effects on performance
Last updated: July 2026
10.2 Heat, Temperature & Gas Laws
Quick Answer: Temperature is a measure of hotness tied to average molecular kinetic energy; heat is energy in transit because of a temperature difference. Use Q = mcΔT for sensible heating/cooling and Q = mL for phase changes. For gases at FSc level, apply PV = nRT with T in kelvin, and specialize to Boyle (T fixed), Charles (P fixed), and Gay-Lussac (V fixed)—all of which appear in atmospheric, tire, and engine-intake reasoning.
Aeronautical systems constantly exchange heat and manage gases under changing pressure and temperature. Turbine engines ingest air whose density depends on T and p; landing-gear struts and tires hold compressed gas; the International Standard Atmosphere (ISA) models how temperature falls with altitude. This section reviews thermal vocabulary and gas laws through compact calculations.
Temperature vs Heat
Temperature indicates how hot or cold a body is. On the microscopic picture taught at FSc level, absolute temperature is proportional to the average translational kinetic energy of molecules. Scales:
- Scale Fixed points (common) Study note
- Celsius (°C) 0 °C ice, 100 °C steam (1 atm) Everyday meteorology & ISA tables
- Kelvin (K) T(K) = t(°C) + 273 Required in gas-law equations
- Fahrenheit (°F) Rare in Pakistani FSc syllabi Convert if a foreign source uses it
Heat is energy transferred between systems because of a temperature difference—not “something a body contains” in modern language (internal energy U is the stored microscopic energy). SI unit of heat and energy: joule (J) . Older texts use calorie (1 cal ≈ 4.186 J).
Heat flows spontaneously from higher to lower temperature until thermal equilibrium—setting up the zeroth law discussed in the next section.
- Specific Heat Capacity
- When a body changes temperature without changing phase: Q = m c Δ T Q = mc\Delta T Q = m c Δ T
- m — mass
- c — specific heat capacity (J kg⁻¹ °C⁻¹ or J kg⁻¹ K⁻¹; the size of a degree is the same)
- ΔT — temperature change
Water has a high c (≈ 4180 J kg⁻¹ °C⁻¹), so it stores a lot of thermal energy per degree—useful for cooling jackets and for understanding why large water masses change temperature slowly. Metals used in engines and airframes have much lower c and heat (or cool) faster for the same mass and heat input.
Worked example — specific heat. How much heat raises 2.0 kg of aluminum (c ≈ 900 J kg⁻¹ °C⁻¹) from 20 °C to 120 °C?
Q = mcΔT = 2.0 × 900 × (100) = 1.8 × 10⁵ J .
Latent Heat and Phase Change
During melting or boiling at constant pressure, temperature stays constant while heat is absorbed or released: Q = m L Q = mL Q = m L
L_f = latent heat of fusion; L_v = latent heat of vaporization. Water: L_f ≈ 3.34 × 10⁵ J/kg, L_v ≈ 2.26 × 10⁶ J/kg. Evaporative cooling (sweat, fuel vaporization in some contexts, fog formation) is latent-heat physics.
Worked example — latent heat. Energy to melt 0.50 kg of ice at 0 °C: Q = 0.50 × 3.34 × 10⁵ = 1.67 × 10⁵ J —with no temperature rise until melting finishes.
Thermal Expansion (Brief Aero Link)
Linear expansion: ΔL = αL₀ΔT. Area and volume expansions use 2α and ≈3α for isotropic solids. Riveted joints, control cables, and fuel volumes all change with temperature; designers leave expansion gaps and specify temperature ranges. Gases expand much more dramatically—captured by Charles’s law below.
- Ideal Gas Model and Absolute Temperature
- An ideal gas obeys: P V = n R T PV = nRT P V = n RT
- P — absolute pressure (Pa)
- V — volume (m³)
- n — amount of substance (mol)
- R — universal gas constant ≈ 8.314 J mol⁻¹ K⁻¹
- T — absolute temperature (K)
Equivalently pV = NkT with Boltzmann’s constant k. Real air at ordinary aircraft temperatures and pressures is close enough to ideal for FSc problems unless the question states otherwise.
Critical rule: never insert Celsius into PV = nRT. Convert: T(K) = t(°C) + 273 (more precisely +273.15; exams usually accept +273).
Boyle’s, Charles’s, and Gay-Lussac’s Laws
Special cases of the ideal gas law:
- Law Held constant Relation Memory hook
- Boyle T P ∝ 1/V or P₁V₁ = P₂V₂ Squeeze a balloon → pressure up
- Charles P V ∝ T or V₁/T₁ = V₂/T₂ Hot air rises / expands
- Gay-Lussac (pressure law) V P ∝ T or P₁/T₁ = P₂/T₂ Closed tire heats → pressure up
- Combined n fixed P₁V₁/T₁ = P₂V₂/T₂ General process linking two states
Worked example — Boyle. Gas in a cylinder at 2.0 × 10⁵ Pa occupies 0.030 m³ at constant temperature. Compressed to 0.010 m³, new pressure P₂ = P₁V₁/V₂ = (2.0 × 10⁵)(0.030)/0.010 = 6.0 × 10⁵ Pa .
Worked example — Charles. Air at constant pressure occupies 0.020 m³ at 27 °C (300 K). Heated to 127 °C (400 K): V₂ = V₁(T₂/T₁) = 0.020 × (400/300) = 0.0267 m³ .
Worked example — Gay-Lussac (tire-style). A closed rigid volume holds gas at 250 kPa absolute and 20 °C (293 K). After taxi, temperature reaches 50 °C (323 K). P₂ = P₁(T₂/T₁) = 250 × (323/293) ≈ 275 kPa . Pressure rose though volume was fixed—exactly why tire and strut pressures are checked cold with temperature corrections in mind.
Worked example — combined / atmosphere flavor. A mass of air at 101 kPa and 15 °C (288 K) is taken to a condition at 70 kPa and −5 °C (268 K). Volume ratio: V₂/V₁ = (P₁/P₂)(T₂/T₁) = (101/70)(268/288) ≈ 1.34. Same air mass occupies more volume aloft when pressure falls faster than temperature in this scenario—density ρ = m/V therefore drops, cutting lift for a given true airspeed.
Density, ISA Thinking, and Engines
From the ideal gas law, ρ = PM/(RT) for molar mass M—so density rises with pressure and falls with temperature. That is the heart of density altitude : hot + high → lower ρ → less lift and thrust for the same indicated conditions. Intake mass flow ṁ ≈ ρAv likewise falls when density falls, affecting engine power.
- Heat Transfer Modes
- Conduction — through solids (engine mounts, skin)
- Convection — bulk fluid motion (cooling airflow over fins and radiators)
- Radiation — electromagnetic emission (skin in sunlight, hot turbine parts)
Questions may ask which mode dominates in a scenario; link the mode to the physical path of energy, not memorized slogans alone.
- Common Mistakes
- Using °C inside PV = nRT
- Mixing gauge pressure with absolute pressure in gas laws
- Applying Q = mcΔT across a phase change (use mL instead while T is constant)
Forgetting that Boyle requires constant temperature—fast compressions are closer to adiabatic processes (advanced topic; see thermodynamics laws section for heat engines)
If you can move fluently among Q = mcΔT, Q = mL, and P₁V₁/T₁ = P₂V₂/T₂ with kelvin temperatures, you own this blueprint slice.