Study guide

9.2 Fluid Dynamics & Bernoulli

Pakistan Air Force GD Pilot Initial Test Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Eligibility & Registration 1.3 Test Format & Selection Pipeline

2 Verbal Intelligence: Word Relationships

2.1 Analogies 2.2 Synonyms & Antonyms 2.3 Vocabulary in Context 2.4 Sentence Completion

3 Verbal Intelligence: Series & Coding

3.1 Number Series 3.2 Letter & Alpha-Numeric Series 3.3 Coding-Decoding

4 Verbal Intelligence: Quantitative Logic

4.1 Direction Sense 4.2 Percentages 4.3 Age & Relationship Problems 4.4 Time, Speed & Distance

5 Non-Verbal Intelligence: Patterns

5.1 Pattern & Figure Series 5.2 Odd-One-Out 5.3 Classification

6 Non-Verbal Intelligence: Spatial Reasoning

6.1 Rotation 6.2 Mirror Images 6.3 Matrix Reasoning 6.4 Spatial Reasoning

7 English: Grammar Foundations

7.1 Grammar Essentials 7.2 Tenses 7.3 Prepositions

8 English: Voice, Reported Speech, Correction & Vocabulary

8.1 Active & Passive Voice 8.2 Sentence Correction 8.3 Spelling 8.4 Vocabulary & Comprehension 8.5 Direct & Indirect Speech

9 Physics: Mechanics & Fluids

9.1 Mechanics 9.2 Fluid Dynamics & Bernoulli

10 Physics: Waves, Optics & Modern

10.1 Waves & Sound 10.2 Optics & Light 10.3 Modern Physics

11 Physics: Electromagnetism & Thermodynamics

11.1 Electromagnetism 11.2 Thermodynamics

12 Mathematics: Algebra, Calculus & Logs

12.1 Algebra 12.2 Calculus Basics 12.3 Logarithms

13 Mathematics: Geometry, Trig, Matrices & Vectors

13.1 Geometry 13.2 Trigonometry 13.3 Matrices & Vectors

14 Mathematics: Applied Reasoning

14.1 Percentages & Ratio 14.2 Word Problems

15 General Knowledge: PAF & Aviation

15.1 PAF Organisation 15.2 PAF History 15.3 Aviation Fundamentals

16 General Knowledge: Pakistan & General Science

16.1 Pakistan Geography 16.2 Armed Forces Selection & Basic Science

17 Test-Day Strategy & Selection Pipeline

17.1 Test-Day Strategy 17.2 Later Selection Stages

9.2 Fluid Dynamics & Bernoulli

Key Takeaways Explain This Topic AI

Pressure P = F/A has SI unit pascal (Pa = N/m²); in a static fluid at depth h, P = ρgh.

Archimedes' principle: the buoyant force equals the weight of fluid displaced, F_b = ρ_fluid · g · V.

The continuity equation A₁v₁ = A₂v₂ keeps the volume flow rate constant for an incompressible fluid.

Bernoulli's principle: faster fluid flow means lower static pressure — the physical basis of wing lift.

Dynamic viscosity has SI unit Pa·s; water at 20 °C is about 1.0 × 10⁻³ Pa·s, air about 1.8 × 10⁻⁵ Pa·s.

Last updated: August 2026

  • 9.2 Fluid Dynamics & Bernoulli
  • Pressure

Pressure (P) is force per unit area: P = F/A . The SI unit is the pascal (Pa), where 1 Pa = 1 N/m². In a static fluid of density ρ at depth h, pressure increases with depth:

P = ρgh

Pressure at a point acts equally in all directions — this is why a dam wall is built thicker at the base, and why a diver's ears hurt long before the air supply runs out.

Worked example — hydraulic piston: A 50 N force is applied to a piston of area 0.01 m². What pressure is transmitted through the fluid?

P = F/A = 50 / 0.01 = 5000 Pa = 5 kPa

Hydraulic systems exploit the fact that pressure is transmitted undiminished: a small force on a small piston can lift a heavy load on a large piston. This is the principle behind aircraft hydraulic landing gear and brakes.

Buoyancy (Archimedes' Principle)

The buoyant force on a body submerged (fully or partly) in a fluid equals the weight of the fluid it displaces:

F_b = ρ_fluid · g · V_displaced

A body floats when its average density is less than the fluid's. A hot-air balloon rises because heated air is less dense than the surrounding atmosphere. Note that a 400-tonne aircraft does not float on air by buoyancy — it is lift , not buoyancy, that holds it up. Buoyancy needs a displaced volume whose weight matches the load; for a steel aircraft that would require a vacuum-filled hull the size of a stadium. Lift, by contrast, is generated dynamically by the wing.

The Continuity Equation

For an incompressible fluid (essentially all liquids, and air at speeds well below the speed of sound) flowing through a pipe of varying cross-section, the volume flow rate is conserved:

A₁v₁ = A₂v₂

Where the pipe narrows, the fluid speeds up; where it widens, it slows down. This is why a nozzle constricts a jet of water into a fast, focused stream, and — crucially for aviation — why air accelerates as it streams over the narrowed flow paths above a curved wing.

Worked example — pipe expansion: Water flows at 4 m/s through a pipe of cross-section 2 cm² that widens to 8 cm². Find the new speed.

A₁v₁ = A₂v₂ ⇒ (2)(4) = (8)(v₂) ⇒ v₂ = 8/8 = 1 m/s

Doubling the area halves the speed; quadrupling it quarters the speed. The same physics governs the airflow above and below an airfoil.

Bernoulli's Principle

For steady, incompressible, frictionless flow along a streamline, the total mechanical energy per unit volume is constant:

P + ½ρv² + ρgh = constant

The three terms are static pressure (P), dynamic pressure (½ρv²), and hydrostatic pressure (ρgh). At the same height, if speed rises, static pressure must fall — Bernoulli trades one for the other.

Aviation application — how a wing makes lift: An airfoil is shaped so that air travels faster over the curved upper surface than over the flatter lower surface. By Bernoulli, faster air means lower static pressure on top . The pressure difference (P_bottom − P_top) multiplied by the wing area gives the lift force :

L = (P_bottom − P_top) × A_wing

At takeoff the pilot rotates the nose up to increase the angle of attack , which intensifies the pressure difference; lift grows with the square of speed until it exceeds weight, and the aircraft climbs.

Worked example — lift estimate: Airspeed over the upper wing is 250 m/s, below is 200 m/s. Taking ρ ≈ 1.2 kg/m³, the pressure difference is:

ΔP = ½ρ(v_top² − v_bottom²) = ½(1.2)(250² − 200²) = 0.6(62 500 − 40 000) = 0.6(22 500) = 13 500 Pa

Over a 30 m² wing, lift = 13 500 × 30 = 405 000 N (about 41 tonnes of force).

In reality, lift is also explained by Newton's third law: the wing deflects air downward, and the air pushes the wing up. The two explanations are complementary , not contradictory — Bernoulli describes the pressure field, Newton describes the momentum transfer.

Loading diagram... Airfoil Lift: Faster Flow Above, Higher Pressure Below

Viscosity

Viscosity (η) is a fluid's internal resistance to flow — think of honey versus water. The dynamic viscosity SI unit is the pascal-second (Pa·s) , where 1 Pa·s = 1 N·s/m². Typical values at room temperature:

  • Air: ≈ 1.8 × 10⁻⁵ Pa·s
  • Water (20 °C): ≈ 1.0 × 10⁻³ Pa·s
  • Glycerin: ≈ 1.4 Pa·s
  • Honey: ≈ 10 Pa·s

Higher viscosity means more energy lost to internal friction, which shows up as skin-friction drag on a moving aircraft. Reducing viscosity-related drag is why aerodynamic surfaces are polished and why laminar-flow wings are designed to keep the boundary layer smooth for as long as possible.

Note the distinction: dynamic viscosity (η, Pa·s) appears in F = ηA(dv/dy); kinematic viscosity (ν = η/ρ, m²/s) is what you use in Reynolds-number calculations. Don't confuse the two on the exam.

Common Traps

Static vs dynamic pressure: Static pressure is what a tyre gauge reads; dynamic pressure (½ρv²) is the pressure a moving fluid exerts when brought to rest. Bernoulli trades static for dynamic pressure along a streamline — they are not the same quantity, and you cannot add one to itself to get the other.

Bernoulli is not the whole lift story: Real lift also relies on Newton's third law (the wing deflects air downward; the air pushes the wing up). Examiners may probe whether you confuse the two — they are complementary, not contradictory.

Continuity needs incompressible flow: It holds well for liquids and low-speed air, but breaks down at compressible (near-sonic) speeds where density changes along the streamline.

Bernoulli assumes no viscosity: Near the wing surface, viscous effects in the boundary layer matter; Bernoulli describes the flow just outside that layer.

Dynamic Viscosity of Common Fluids (mPa·s)