Study guide
5.3 Perimeter, Area & Spatial Geometry at Crime Scenes
Police Aptitude and Character Test PACT
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Introduction to the PACT & Assessment Architecture
1.1 PACT Architecture, Exam Administration & Scoring Standards 1.2 High-Speed Pacing, Elimination Tactics & Test Anxiety 1.3 The Law Enforcement Selection Pipeline & Academy Transition
2 Chapter 2: Reading Ability & Policy Comprehension
2.1 Factual Recall & Direct Information Extraction 2.2 Interpreting Departmental Policies & Standard Operating Procedures 2.3 Drawing Valid Inferences & Supported Conclusions 2.4 Synthesizing Multiple Witness Statements & Narrative Accounts
3 Chapter 3: Writing Ability, Grammar & Report Clarity
3.1 Spelling & Frequently Confused Homophones in Public Safety 3.2 Punctuation, Run-Ons & Comma Splices in Incident Narratives 3.3 Subject-Verb Agreement, Pronoun Reference & Tense Consistency 3.4 Sentence Structure, Dangling Modifiers & Objective Reporting 3.5 Word Pairs, Misspelled Words, Error Types & Synonyms
4 Chapter 4: Applied Mathematics — Arithmetic, Rates & Accounting
4.1 Multi-Step Arithmetic, Inventory & Patrol Equipment Calculations 4.2 Fractions, Decimals & Proportions in Police Operations 4.3 Currency Handling, Fine Calculations & Evidence Accounting
5 Chapter 5: Applied Mathematics — Statistics, Geometry & Logistics
5.1 Percentages, Crime Rate Changes & Clearance Rates 5.2 Speed, Distance, Elapsed Time & Response Logistics 5.3 Perimeter, Area & Spatial Geometry at Crime Scenes 5.4 Number Series, Age Problems & Capacity Checks
6 Chapter 6: Reasoning, Problem Solving & Logical Deduction
6.1 Deductive Logic & Rule Application Matrices 6.2 Inductive Pattern Recognition & Odd-One-Out Analysis 6.3 Chronological Sequencing & Timeline Reconstruction 6.4 Exact-Duplicate Comparison & Detail Checking
7 Chapter 7: Human Relations, Situational Judgment & Character Assessment
7.1 Answering Most- and Least-Appropriate Situational Items 7.2 Law Enforcement Ethics, Integrity & Avoiding Corruption 7.3 Interpersonal Communication & De-escalation Techniques 7.4 Chain of Command, Teamwork & Supervisory Protocols 7.5 Emotional Regulation, Stress Management & Impartial Policing 7.6 Confidentiality, Decision-Making, Initiative & Self-Improvement
5.3 Perimeter, Area & Spatial Geometry at Crime Scenes
Key Takeaways Explain This Topic AI
Crime scene containment requires calculating perimeters for both inner zones (active evidence) and outer zones (staging and media), using the fundamental formula: Perimeter = 2L + 2W.
Concentric perimeter expansion must account for boundary offsets on all four sides, adding twice the setback distance to both the length and width.
Search area calculations for rectangular facilities (Area = L * W) and triangular sectors (Area = 0.5 * b * h) allow supervisors to allocate personnel equitably based on total square footage.
Grid and lane search logistics determine the number of search passes required by dividing zone width by officer lane spacing.
Traffic collision investigators apply geometric calculations and skid mark formulas to determine minimum pre-braking vehicle speed without electronic tools.
Last updated: October 2026
5.3 Perimeter, Area & Spatial Geometry at Crime Scenes
When patrol officers arrive at major crime scenes, fatal traffic collisions, or hazardous industrial incidents, establishing physical control of the environment is the foremost operational priority. Officers must secure evidence, establish secure cordons to preserve chain of custody under the Fourth Amendment, coordinate multi-officer evidence searches across open terrain, and document roadway skid marks before weather or vehicle traffic destroys perishable physical clues.
All of these tactical functions rely on applied geometry. FPSI describes PACT math as basic addition, subtraction, multiplication, and division, and its published samples do not include geometry formulas. Perimeter and area problems are still excellent practice, because they are the same four operations applied in a few steps, and they must be solved on scratch paper without a calculator. The skid-mark formula at the end of this section goes beyond FPSI's published samples; treat it as enrichment, and expect any formula to be supplied if a test uses one.
Perimeter Fundamentals & Crime Scene Barrier Taping
The perimeter of a geometric figure is the total linear distance around its outer boundary. In field policing, perimeter calculations determine the exact yardage or footage of yellow barrier tape required to secure an incident zone.
The Rectangular Perimeter Formula
Most buildings, residential parcels, and cordoned roadway intersections are rectangular. The perimeter of a rectangle is calculated by summing all four boundary sides:
Perimeter = Length + Width + Length + Width = 2 L + 2 W = 2 ( L + W ) \text{Perimeter} = \text{Length} + \text{Width} + \text{Length} + \text{Width} = 2L + 2W = 2(L + W) Perimeter = Length + Width + Length + Width = 2 L + 2 W = 2 ( L + W )
Where:
L L L is the length of the rectangular boundary.
W W W is the width of the rectangular boundary.
Cordoning Two-Tiered Crime Scenes: Inner vs. Outer Perimeters
Crime-scene guidance commonly calls for two perimeters at a major scene:
Inner Perimeter : Encloses the immediate incident area, physical evidence, victims, weapon drop zones, and trace materials. Access is strictly restricted to authorized primary investigators and crime scene technicians. A designated log officer records every entry and exit by name, badge number, and time.
Outer Perimeter : Encloses the inner perimeter and creates a protective buffer zone. It encompasses the mobile incident command post, equipment staging, patrol vehicle parking, witness holding areas, and a media briefing point.
Loading diagram...
The Concentric Offset Rule (Adding Setbacks to Both Sides)
Perimeter word problems often describe an outer barrier placed a fixed setback distance ( d d d ) away from a building or inner perimeter in all four directions.
Important
The Four-Side Setback Rule : When expanding a perimeter outward by distance d d d , that setback must be added to both ends of the length and both ends of the width. A setback of 15 feet adds 15 + 15 = 30 feet 15 + 15 = 30\text{ feet} 15 + 15 = 30 feet to the total length and 15 + 15 = 30 feet 15 + 15 = 30\text{ feet} 15 + 15 = 30 feet to the total width. Forgetting to double the setback on each dimension is the most frequent candidate error on perimeter questions.
Length outer = L + 2 d \text{Length}_{\text{outer}} = L + 2d Length outer = L + 2 d Width outer = W + 2 d \text{Width}_{\text{outer}} = W + 2d Width outer = W + 2 d Perimeter outer = 2 ( L + 2 d ) + 2 ( W + 2 d ) = 2 L + 2 W + 8 d = Perimeter inner + 8 d \text{Perimeter}_{\text{outer}} = 2(L + 2d) + 2(W + 2d) = 2L + 2W + 8d = \text{Perimeter}_{\text{inner}} + 8d Perimeter outer = 2 ( L + 2 d ) + 2 ( W + 2 d ) = 2 L + 2 W + 8 d = Perimeter inner + 8 d
Step-by-Step Cordoning Calculation
Scenario : Officers respond to a commercial warehouse burglary where physical evidence is scattered outside the building. The warehouse footprint measures 100 feet long by 60 feet wide. The incident commander directs officers to:
Run inner barrier tape tightly around the warehouse exterior walls.
Run outer barrier tape 20 feet beyond the building walls in all four directions.
Determine how many 500-foot rolls of barrier tape are needed to complete both perimeters.
Step 1: Calculate Inner Perimeter Tape : Perimeter inner = 2 ( L ) + 2 ( W ) = 2 ( 100 ) + 2 ( 60 ) = 200 + 120 = 320 feet \text{Perimeter}_{\text{inner}} = 2(L) + 2(W) = 2(100) + 2(60) = 200 + 120 = 320\text{ feet} Perimeter inner = 2 ( L ) + 2 ( W ) = 2 ( 100 ) + 2 ( 60 ) = 200 + 120 = 320 feet
Step 2: Calculate Outer Dimensions with 20-Foot Setback :
Length: L outer = 100 + 20 + 20 = 140 feet L_{\text{outer}} = 100 + 20 + 20 = 140\text{ feet} L outer = 100 + 20 + 20 = 140 feet
Width: W outer = 60 + 20 + 20 = 100 feet W_{\text{outer}} = 60 + 20 + 20 = 100\text{ feet} W outer = 60 + 20 + 20 = 100 feet
Step 3: Calculate Outer Perimeter Tape : Perimeter outer = 2 ( 140 ) + 2 ( 100 ) = 280 + 200 = 480 feet \text{Perimeter}_{\text{outer}} = 2(140) + 2(100) = 280 + 200 = 480\text{ feet} Perimeter outer = 2 ( 140 ) + 2 ( 100 ) = 280 + 200 = 480 feet (Note: Using the shortcut formula Perimeter inner + 8 d = 320 + 8 ( 20 ) = 320 + 160 = 480 feet \text{Perimeter}_{\text{inner}} + 8d = 320 + 8(20) = 320 + 160 = 480\text{ feet} Perimeter inner + 8 d = 320 + 8 ( 20 ) = 320 + 160 = 480 feet .)
Step 4: Total Tape Required and Roll Procurement : Total Tape = 320 + 480 = 800 feet \text{Total Tape} = 320 + 480 = 800\text{ feet} Total Tape = 320 + 480 = 800 feet
Since barrier tape is packaged in 500-foot rolls: 800 500 = 1.6 rolls \frac{800}{500} = 1.6\text{ rolls} 500 800 = 1.6 rolls
Because supply rolls cannot be purchased as partial units, the officers must retrieve 2 full 500-foot rolls (1,000 feet total) to secure the scene.
Area Calculations for Premises & Evidence Search Sectors
While perimeter measures linear boundary distance, area measures the two-dimensional surface space enclosed within a boundary, expressed in square units (such as square feet, square yards, or acres).
Primary Geometric Area Formulas
Rectangular Zones : Area = Length × Width = L × W \text{Area} = \text{Length} \times \text{Width} = L \times W Area = Length × Width = L × W
Triangular Sectors (used when searching triangular park quadrants, highway off-ramp medians, or alley sightlines): Area = 1 2 × Base × Height = b × h 2 \text{Area} = \frac{1}{2} \times \text{Base} \times \text{Height} = \frac{b \times h}{2} Area = 2 1 × Base × Height = 2 b × h
Composite (L-Shaped) Zones : Break the irregular polygon into non-overlapping sub-rectangles, compute the area of each sub-rectangle, and sum the results. +-----------------------+
- | Sector A |
- | (40 ft x 30 ft) |
- | 1,200 sq ft |
- +-----------+-----------+
- | Sector B |
- | (20 x 50) |
- | 1,000 sq |
- +-----------+
- Total Composite Area = 1,200 + 1,000 = 2,200 sq ft
- Personnel Workload Allocation by Square Footage
When commanding large search operations, supervisory personnel must distribute search zones fairly among available officers based on square footage.
Scenario : An evidence search team must canvass an open rectangular field measuring 120 feet wide by 250 feet long for a discarded firearm. The team consists of 6 search officers. How many square feet of search area is each officer responsible for covering?
Calculate total field area: Total Area = L × W = 250 ft × 120 ft = 30,000 sq ft \text{Total Area} = L \times W = 250\text{ ft} \times 120\text{ ft} = 30{,}000\text{ sq ft} Total Area = L × W = 250 ft × 120 ft = 30 , 000 sq ft
Divide total area by the number of officers: Area per Officer = 30,000 sq ft 6 officers = 5,000 square feet per officer \text{Area per Officer} = \frac{30{,}000\text{ sq ft}}{6\text{ officers}} = 5{,}000\text{ square feet per officer} Area per Officer = 6 officers 30 , 000 sq ft = 5 , 000 square feet per officer
Search Logistics: Strip / Lane Searches and Swath Spacing
In field evidence recovery, officers utilize structured search patterns to ensure 100 % 100\% 100% ground coverage. The most common tactical pattern is the strip or lane search (also called a line search).
Strip Search Mechanics
A line of officers stands abreast along the starting boundary line.
Officers walk forward in lockstep, scanning the ground immediately in front of them within a defined search lane.
Lane Width (Swath) : The lateral distance assigned to each searcher. In heavy vegetation, tall grass, or when searching for tiny physical evidence (such as 9mm cartridge casings or teeth), lane width is narrowed to 3 to 4 feet. In open pavement or short grass, lane width expands to 6 to 10 feet.
Total Lanes Required = Total Width of Search Zone Lane Width per Officer \text{Total Lanes Required} = \frac{\text{Total Width of Search Zone}}{\text{Lane Width per Officer}} Total Lanes Required = Lane Width per Officer Total Width of Search Zone Number of Team Passes = Total Lanes Required Number of Officers Walking Abreast \text{Number of Team Passes} = \frac{\text{Total Lanes Required}}{\text{Number of Officers Walking Abreast}} Number of Team Passes = Number of Officers Walking Abreast Total Lanes Required
Step-by-Step Line Search Problem
Scenario : A search coordinator must systematically search a 160-foot wide by 300-foot long open rectangular parcel for discarded narcotics packaging. Because the packaging is small, the coordinator narrows the lane width to 4 feet per officer even though the grass is mowed short. The department provides an 8-officer search team.
Calculate total search lanes across the 160-foot width: Total Lanes = 160 feet 4 feet/lane = 40 lanes \text{Total Lanes} = \frac{160\text{ feet}}{4\text{ feet/lane}} = 40\text{ lanes} Total Lanes = 4 feet/lane 160 feet = 40 lanes
Calculate the lateral width cleared during each pass by the 8-officer team: Width cleared per pass = 8 officers × 4 feet/officer = 32 feet per pass \text{Width cleared per pass} = 8\text{ officers} \times 4\text{ feet/officer} = 32\text{ feet per pass} Width cleared per pass = 8 officers × 4 feet/officer = 32 feet per pass
Calculate the number of full passes needed to cover the 160-foot zone: Number of Passes = 40 lanes 8 officers = 160 feet 32 feet/pass = 5 passes \text{Number of Passes} = \frac{40\text{ lanes}}{8\text{ officers}} = \frac{160\text{ feet}}{32\text{ feet/pass}} = 5\text{ passes} Number of Passes = 8 officers 40 lanes = 32 feet/pass 160 feet = 5 passes
Result : The team must complete exactly 5 passes across the 300-foot length to sweep the entire zone.
Skid Mark Distance & Collision Speed Reconstruction
At vehicular crash scenes, tire skid marks represent irreplaceable physical evidence of emergency braking. When vehicle brakes lock wheels, kinetic energy is converted into thermal friction as tires slide across the road surface. By measuring the length of these skid marks and determining the surface friction, investigators calculate the vehicle's minimum speed prior to braking.
Averaging Four-Wheel Skid Distances
Because vehicle weight shifts forward during hard braking, each of the four tires leaves skid marks of varying lengths. To establish the representative skid distance ( d d d ), investigators measure all four individual marks and compute their arithmetic average:
d avg = d Front Left + d Front Right + d Rear Left + d Rear Right 4 d_{\text{avg}} = \frac{d_{\text{Front Left}} + d_{\text{Front Right}} + d_{\text{Rear Left}} + d_{\text{Rear Right}}}{4} d avg = 4 d Front Left + d Front Right + d Rear Left + d Rear Right
Example : Investigators measure four locked-wheel tire marks on asphalt:
- Front Left: 82 feet 82\text{ feet} 82 feet
- Front Right: 86 feet 86\text{ feet} 86 feet
- Rear Left: 76 feet 76\text{ feet} 76 feet
- Rear Right: 80 feet 80\text{ feet} 80 feet
d avg = 82 + 86 + 76 + 80 4 = 324 4 = 81 feet d_{\text{avg}} = \frac{82 + 86 + 76 + 80}{4} = \frac{324}{4} = 81\text{ feet} d avg = 4 82 + 86 + 76 + 80 = 4 324 = 81 feet
The Standard Minimum Speed Formula
In traffic crash investigation, the simplified minimum speed formula (assuming level road and 100% braking efficiency) is expressed as:
S = 30 × d × f S = \sqrt{30 \times d \times f} S = 30 × d × f
Where:
S S S is the minimum pre-braking vehicle speed in miles per hour (mph).
30 30 30 is the gravitational conversion constant derived from physics ( 2 g ≈ 64.4 ft/s 2 2g \approx 64.4\text{ ft/s}^2 2 g ≈ 64.4 ft/s 2 converted to mph).
d d d is the average skid mark distance in feet.
f f f is the drag factor (coefficient of friction) of the roadway surface.
Drag Factor ( f f f ) Reference Values
- Roadway Surface Condition Illustrative Drag Factor Range ( f f f )
- Clean, Dry Concrete or Asphalt 0.70 − 0.85 0.70 - 0.85 0.70 − 0.85 (typically 0.75 0.75 0.75 )
- Wet Concrete or Asphalt 0.40 − 0.55 0.40 - 0.55 0.40 − 0.55 (typically 0.50 0.50 0.50 )
- Loose Gravel or Dirt 0.35 − 0.45 0.35 - 0.45 0.35 − 0.45
- Packed Snow 0.30 − 0.55 0.30 - 0.55 0.30 − 0.55
- Ice 0.10 − 0.25 0.10 - 0.25 0.10 − 0.25
Published tables vary with the age of the surface, temperature, and tires, so a problem will always state the drag factor to use.
Step-by-Step Speed Calculation Walkthrough
Scenario : A vehicle skids to a complete halt on dry asphalt with a verified drag factor of f = 0.75 f = 0.75 f = 0.75 . The average skid mark length across all four wheels is measured at 90 feet. What was the minimum speed of the vehicle when braking commenced?
Multiply the constant, distance, and drag factor inside the radical: 30 × d × f = 30 × 90 × 0.75 30 \times d \times f = 30 \times 90 \times 0.75 30 × d × f = 30 × 90 × 0.75
Perform intermediate multiplication on scratch paper: 30 × 90 = 2,700 30 \times 90 = 2{,}700 30 × 90 = 2 , 700 2,700 × 0.75 = 2,700 × 3 4 = 8,100 4 = 2,025 2{,}700 \times 0.75 = 2{,}700 \times \frac{3}{4} = \frac{8{,}100}{4} = 2{,}025 2 , 700 × 0.75 = 2 , 700 × 4 3 = 4 8 , 100 = 2 , 025
Extract the square root of 2,025: S = 2,025 S = \sqrt{2{,}025} S = 2 , 025
Find the square root using standard benchmark testing squares:
- 40 2 = 1,600 40^2 = 1{,}600 4 0 2 = 1 , 600
- 50 2 = 2,500 50^2 = 2{,}500 5 0 2 = 2 , 500
- Because the last digit of 2,025 is 5, test 45 45 45 : 45 × 45 = 2,025 45 \times 45 = 2{,}025 45 × 45 = 2 , 025
Result : The vehicle was traveling at a minimum speed of 45 mph .
Tip
Practice problems usually use clean numbers so that the product under the square root is a perfect square or close to one. Memorizing the squares of numbers from 20 to 60 ( 20 2 = 400 20^2=400 2 0 2 = 400 , 30 2 = 900 30^2=900 3 0 2 = 900 , 40 2 = 1,600 40^2=1{,}600 4 0 2 = 1 , 600 , 45 2 = 2,025 45^2=2{,}025 4 5 2 = 2 , 025 , 50 2 = 2,500 50^2=2{,}500 5 0 2 = 2 , 500 , 60 2 = 3,600 60^2=3{,}600 6 0 2 = 3 , 600 ) enables instant recognition of correct collision speeds.
Perimeter, area, and search-logistics problems build the same multi-step, four-operation fluency that the PACT's Mathematical Reasoning items reward.