Study guide

6.5 Circles, Polygon Angle Measures, and Composite Figures

Praxis Middle School Mathematics 5164

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & Praxis 5164 Exam Overview

1.1 Praxis 5164 Exam Structure, Logistics, and Scoring 1.2 On-Screen Graphing Calculator, Formula Sheet, and Teaching Scenarios

2 Chapter 2: Number Systems, Arithmetic, and Real Numbers

2.1 Numbers and Quantity: Integers, Rational Numbers, and Real Number System Properties 2.2 Order of Operations, Exponents, and Radicals 2.3 Ratios, Proportions, Unit Rates, and Conversions 2.4 Percent, Percent Change, and Financial Applications 2.5 Fraction, Decimal, and Percent Models and Equivalence

3 Chapter 3: Number Theory and Discrete Mathematics

3.1 Prime Factorization, GCF, and LCM 3.2 Divisibility Rules and Modular Principles 3.3 Arithmetic and Geometric Sequences and Series

4 Chapter 4: Algebraic Expressions, Equations, and Inequalities

4.1 Algebraic Expressions and Polynomial Operations 4.2 Linear Equations and Inequalities in One Variable 4.3 Systems of Linear Equations and Inequalities in Two Variables 4.5 Systems with a Linear and a Quadratic Equation 4.4 Quadratic Equations, Factoring, and the Quadratic Formula

5 Chapter 5: Functions and Graphing

5.1 Relations, Functions, Domain, and Range 5.2 Linear Functions, Slope, and Graphing 5.3 Quadratic and Exponential Functions and Transformations

6 Chapter 6: Geometry and Measurement

6.1 2D Geometric Figures, Triangles, Quadrilaterals, and Polygons 6.2 Measurement: Perimeter, Area, Surface Area, and 3D Volume 6.3 Transformations, Congruence, Similarity, and Coordinate Geometry 6.4 Pythagorean Theorem and Special Right Triangles 6.5 Circles, Polygon Angle Measures, and Composite Figures 6.6 Measurement Systems, Estimation, and Unit Choice

7 Chapter 7: Data Analysis, Statistics, and Probability

7.1 Data Analysis: Data Representations, Charts, Histograms, and Plots 7.2 Statistics: Measures of Central Tendency and Variation 7.3 Theoretical and Experimental Probability and Compound Events 7.4 Counting Principles, Permutations, and Combinations 7.5 Statistical Questions, Sampling, and Inference

6.5 Circles, Polygon Angle Measures, and Composite Figures

Key Takeaways Explain This Topic AI

The ETS 5164 reference sheet provides C = 2πr, A = πr², and S = 180°(n − 2); practice applying the sheet rather than memorizing from scratch.

Each interior angle of a regular n-gon is S/n; equivalently, each exterior angle is 360°/n and each interior angle is 180° minus that exterior angle.

A circle inscribed in a square has diameter equal to the square’s side; swapping inscribed/circumscribed language is a common Praxis error.

Composite area and perimeter problems require shading or outlining first so shared edges and square-minus-circle regions are not double-counted.

Last updated: July 2026

6.5 Circles, Polygon Angle Measures, and Composite Figures

On the Praxis 5164, Geometry and Measurement items frequently ask you to combine polygon angle formulas with circle circumference and area . The ETS Study Companion explicitly flags composite problems such as finding the difference between the area of a square and the area of a circle inscribed in that square. The good news: the key formulas appear on the ETS 5164 math reference sheet . Your job on test day is not to invent them from scratch—it is to locate them quickly and apply them accurately .

Formulas on the ETS 5164 Reference Sheet

Practice opening the on-screen reference sheet and finding these three relationships until the motion is automatic:

  • Relationship Formula (as used on Praxis 5164) What you compute
  • Circumference of a circle C = 2πr Distance around the circle
  • Area of a circle A = πr² Region inside the circle
  • Interior-angle sum of an n-gon S = 180°(n − 2) Sum of all interior angles

A regular polygon has all sides congruent and all interior angles congruent. Once you know the sum S, each interior angle of a regular n-gon is S/n = 180°(n−2)/n.

Exterior angles (useful companion fact)

At each vertex of a convex polygon, an interior angle and an adjacent exterior angle form a straight line, so they sum to 180°. For any convex polygon, the sum of one exterior angle at each vertex is 360°. For a regular n-gon, each exterior angle measures 360°/n. Many Praxis items let you choose whether to work from the interior-sum formula on the sheet or from the exterior-angle shortcut—both are valid if applied carefully.

Worked Example 1: Regular Polygon Interior Angles

Problem. What is the measure of each interior angle of a regular octagon?

Solution. An octagon has n = 8 sides. From the reference sheet,

S = 180°(8 − 2) = 180° · 6 = 1080°.

Because the octagon is regular, each interior angle is 1080°/8 = 135°.

Check with exterior angles. Each exterior angle of a regular octagon is 360°/8 = 45°, so each interior angle is 180° − 45° = 135°. Same answer, different path.

Worked Example 2: Circumference and Area from the Sheet

Problem. A circular garden has radius 7 meters. Find its circumference and area in terms of π.

Using C = 2πr and A = πr²,

C = 2π(7) = 14π meters, and A = π(7)² = 49π square meters.

Praxis tip. Leave answers in terms of π unless the item asks for a decimal approximation. If a decimal is required, use the on-screen graphing calculator and watch the radius-versus-diameter trap: C = 2πr = πd, so doubling a radius/diameter error doubles the circumference error and quadruples the area error.

Worked Example 3: Square with an Inscribed Circle (ETS-style Composite)

Problem. A circle is inscribed in a square with side length 10 cm. Find (a) the area of the square, (b) the area of the circle, and (c) the area of the region inside the square but outside the circle.

When a circle is inscribed in a square, the circle touches all four sides, so the circle’s diameter equals the side of the square .

Side of square: s = 10 cm → diameter d = 10 cm → radius r = 5 cm.

Area of square: 10 × 10 = 100 cm².

Area of circle: A = πr² = π(5)² = 25π cm².

Shaded “corners” region: 100 − 25π cm².

If the item asks for a numerical approximation, 25π ≈ 78.54, so the difference is about 21.46 cm². Prefer the exact form 100 − 25π when it is an option.

Circumscribed versus inscribed (a high-frequency language trap)

Circle inscribed in a square: diameter = side of square.

Square inscribed in a circle: diagonal of square = diameter of circle.

Swapping those two phrases is one of the most common Praxis geometry errors. Always sketch before substituting into C = 2πr or A = πr².

Worked Example 4: Composite Perimeter

Problem. A running track consists of a rectangle that is 100 m by 60 m with a semicircle attached to each 60-m end (two semicircles make one full circle of diameter 60 m). What is the perimeter of the outer boundary?

The two lengths of 100 m remain part of the outer path. The two widths are replaced by the curved ends. Those two semicircles form one full circle of radius r = 30 m, so the curved distance is C = 2π(30) = 60π meters. Total perimeter:

100 + 100 + 60π = 200 + 60π meters.

Do not add the 60-m widths; those segments are interior to the track outline once the semicircles are attached.

Teaching Scenario

A seventh-grade student is finding each interior angle of a regular hexagon. The student correctly recalls “something with n − 2” but writes S = 180°(n + 2), gets S = 1440°, and concludes each angle is 240°. Another student uses S = 180°(n − 2) = 720° correctly, then forgets to divide by 6 and reports 720° as “the” interior angle.

Instructional move. Have both students open the Praxis-style formula S = 180(n−2) and label S as a sum , not a single angle. Then require a two-line template: (1) compute S; (2) if the polygon is regular, divide by n. Asking “Is 240° plausible for an interior angle of a convex hexagon?” builds estimation habits—convex interior angles are less than 180°.

Praxis Traps to Avoid

Memorizing instead of using the sheet. The Study Companion advises familiarity with what is given . During practice, force yourself to look up C = 2πr, A = πr², and S = 180(n−2) rather than relying on memory alone.

Radius/diameter mix-ups. Area uses r²; if a problem gives diameter 12, then r = 6 and A = 36π, not 144π.

Forgetting to divide the angle sum. S is the total; regular polygons need S/n.

Composite shading errors. Decide clearly whether you need square minus circle, circle minus square, or a ring/annulus. Sketch and shade before computing.

Perimeter double-counting. In composite outlines, omit shared internal segments.

Mastering these sheet-based formulas with composite reasoning prepares you for the exact Geometry and Measurement tasks emphasized in the Praxis 5164 Study Companion.