Study guide

15.2 Weathering, Erosion, and Deposition

Praxis Middle School Science 5442

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 SEPs and Teaching-Scenario Questions

2 Nature of Science and Engineering

2.1 Nature of Scientific Knowledge and Inquiry 2.2 Engineering Design Process 2.3 Laboratory Safety, Materials, and Equipment

3 Science, Technology, Society, and the Environment

3.1 Interdependence of Science, Engineering, and Technology 3.2 Environmental and Societal Impacts 3.3 Energy Production and Natural Resources 3.4 Everyday Applications of Science and Technology

4 Structure and Properties of Matter

4.1 Atomic Structure and Isotopes 4.2 The Periodic Table 4.3 States of Matter and the Particle Model 4.4 Elements, Compounds, and Mixtures

5 Mixtures, Bonding, and Phase Changes

5.1 Solutions, Acids, and Bases 5.2 Chemical Bonding and Formulas 5.3 Phase Changes and Thermal Energy

6 Chemical Reactions

6.1 Chemical vs Physical Change and Conservation of Matter 6.2 Reaction Types and Energy

7 Forces and Motion

7.1 Describing Motion 7.2 Newton's Laws, Buoyancy, and Gravity

8 Electricity and Magnetism

8.1 Electrostatics and Simple Circuits 8.2 Magnetism and Electromagnetic Applications

9 Energy and Waves

9.1 Forms and Conservation of Energy 9.2 Thermal Energy Transfer 9.3 Waves and Their Applications

10 Cells and Multicellular Organization

10.1 Cell Structure and Transport 10.2 Cell Types and Levels of Organization 10.3 Organ Systems and Homeostasis 10.4 Growth, Mitosis, and Meiosis

11 Organism Energy Flow, Reproduction, and Senses

11.1 Photosynthesis, Respiration, and Biomolecules 11.2 Plant and Animal Reproduction and Adaptations 11.3 Sensory Information Processing

12 Ecosystems: Interactions, Energy, and Dynamics

12.1 Interdependent Relationships in Ecosystems 12.2 Matter Cycling and Energy Transfer 12.3 Ecosystem Dynamics and Biomes

13 Heredity and Biological Evolution

13.1 DNA, RNA, and Inheritance of Traits 13.2 Mendelian Inheritance and Variation 13.3 Evolution, Evidence, and Natural Selection

14 Earth's Place in the Universe

14.1 Stars, Galaxies, and the Universe 14.2 The Solar System 14.3 Sun-Earth-Moon System and Seasons 14.4 Earth's History and Geologic Dating

15 Earth Materials and Plate Tectonics

15.1 Rocks, Minerals, and the Rock Cycle 15.2 Weathering, Erosion, and Deposition 15.3 Plate Tectonics and Hazards

16 Water, Weather, and Climate

16.1 Water Distribution and the Water Cycle 16.2 Oceanography and Water Hazards 16.3 Meteorology and Severe Weather 16.4 Climate and Climate Change

15.2 Weathering, Erosion, and Deposition

Key Takeaways Explain This Topic AI

Weathering breaks down rock in place; erosion transports material; deposition occurs when transport energy drops.

Physical weathering changes size/shape; chemical weathering changes mineral composition; biological agents accelerate both.

Water, ice, and wind produce distinctive landforms such as V-shaped valleys, U-shaped glacial valleys, canyons, dunes, and wave-cut coasts.

Landslide risk increases with steep slopes, saturation, weak materials, and loss of vegetation.

Mitigation includes retaining walls, drainage, vegetation, slope reduction, and avoiding high-hazard sites.

Last updated: July 2026

Still in Domain IV.B.1, Praxis 5442 expects you to separate weathering from erosion , classify weathering processes, connect agents (water, ice, wind) to landforms, and reason about landslide hazards and mitigation. Teaching items often hinge on whether material was broken in place or moved.

Weathering vs. Erosion vs. Deposition

Process What happens Key phrase

Weathering Rock and mineral materials are broken down or chemically altered in place Breakdown / change at the outcrop

  • Erosion Weathered material is removed and transported by a mobile agent Pickup and movement
  • Deposition Transported sediment is dropped when energy decreases Settling / accumulation

Exam trap: "A river carving a canyon is only weathering." Carving a canyon requires weathering plus erosion (and eventual deposition downstream). Weathering prepares loose material; erosion moves it; deposition builds deltas, beaches, and floodplains.

  • Types of Weathering
  • Physical (mechanical) weathering

Physical weathering breaks rock into smaller pieces without changing chemical composition . Surface area increases, which later speeds chemical attack.

Common mechanisms:

Frost wedging : water freezes in cracks, expands (~9%), and pries rock apart—common in climates with freeze–thaw cycles.

Abrasion : rock particles scrape and grind other rock (stream bedload, windblown sand, glacial ice).

Exfoliation / unloading : overlying rock removed; pressure release causes sheets to peel (seen in some granitic domes).

Thermal expansion (localized) and plant-root wedging (often classed with biological weathering) also crack rock.

Chemical weathering

Chemical weathering changes the minerals themselves through reactions with water, oxygen, acids, or other chemicals.

Process What it does Classroom clue

Dissolution Minerals dissolve into water (halite; calcite in weak acids) Caves in limestone; acid-test link to calcite

  • Oxidation Oxygen reacts with iron-bearing minerals Reddish "rust" stains on rocks and soils
  • Hydrolysis Water reacts with silicates (e.g., feldspar → clay) Soft clay-rich soils from granite weathering

Warm, wet climates favor rapid chemical weathering; cold or arid climates often emphasize physical processes. Organic acids from soils amplify chemical breakdown.

Biological weathering

Biological weathering is breakdown aided by living organisms: root wedging, burrowing animals exposing fresh surfaces, lichens and microbes producing acids. It overlaps physical and chemical pathways—what matters on the exam is recognizing organisms as agents that accelerate rock breakdown.

Agents of Erosion: Water, Ice, and Wind

Agent How it erodes / transports Characteristic landforms / deposits

Running water Dissolves load; carries suspended silt/clay; rolls bedload V-shaped stream valleys, canyons, floodplains, deltas, alluvial fans

Ice (glaciers) Plucks and abrades bedrock; carries unsorted debris U-shaped valleys, striations, moraines, glacial till

Wind Lifts dust; sandblasts surfaces in dry regions Yardangs, ventifacts, sand dunes, loess blankets

Gravity (mass wasting) Pulls material downslope, often after weathering weakens slopes Landslides, rockfalls, debris flows, talus slopes

Waves along coastlines are a specialized water agent: they undercut cliffs, sort beach sand, and build or remove barrier features depending on storm energy and sediment supply.

Deposition — When Transport Energy Drops

Deposition begins when a transporting agent loses the energy needed to keep sediment moving. Coarser, denser particles settle first; finer silt and clay travel farther. That sorting explains many classroom landform examples:

Deltas form where a river enters a quiet lake or ocean and drops its load.

Alluvial fans spread at mountain fronts where steep streams suddenly flatten.

Floodplains accumulate mud and sand during overbank floods.

Moraines and unsorted till mark where glacial ice melts and dumps debris.

Dunes and loess record wind deposition of sand versus fine dust.

Praxis teaching stems often show a labeled map (fan at a canyon mouth; spit along a coast) and ask which process dominated—erosion, transport, or deposition. The correct choice hinges on whether material was being picked up, moved, or dropped.

Valleys, Canyons, and Coastlines

Stream valleys typically begin as narrow, V-shaped cuts where downcutting dominates. Over time, lateral erosion widens floodplains. Canyons are deep, steep-walled valleys where a river cuts downward faster than walls can weather back—often in resistant rock and/or uplifted terrain (think arid plateau rivers).

Coastlines record a contest among wave energy, tides, sediment supply, and rock resistance:

Headlands erode; bays may fill with sediment.

Beaches and spits are depositional; sea cliffs and wave-cut platforms are erosional.

Human structures (seawalls, groins) redistribute erosion rather than "stopping" coastal change permanently.

Glacial valleys contrast with stream valleys: ice scours a broader U-shape , often with truncated spurs and polished, striated bedrock.

Landslides — Prediction and Mitigation

A landslide (a form of mass wasting) occurs when gravity overcomes the strength of a slope. Praxis items may ask what increases risk or which mitigation strategy fits a scenario.

Factors that raise landslide likelihood:

  • Steep slopes and undercutting (roads, rivers, waves)
  • Saturation from heavy rain or rapid snowmelt (adds weight, reduces friction)
  • Weak materials (clay layers, deeply weathered rock)
  • Removal of vegetation that binds soil
  • Earthquakes or human blasting that shake slopes
  • Mitigation approach How it helps
  • Retaining walls and buttresses Support the slope toe; resist downslope movement
  • Drainage control Removes water that adds weight and lubricates failure surfaces
  • Vegetation / bioengineering Roots bind soil; intercepts some rainfall
  • Terracing and reducing slope angle Lowers driving force of gravity on the mass
  • Avoidance / land-use planning Keep structures off high-hazard slopes

Retaining walls appear frequently as a concrete mitigation example: they do not stop weathering, but they reduce the chance that eroded or saturated material will fail catastrophically onto a roadway or building. Prediction combines geologic mapping, slope-angle analysis, rainfall thresholds, and monitoring of cracks or tilt—not a single "landslide forecast" like a daily weather map.

Classroom Scenario Pattern

Students photograph a crumbled hillside after a storm and label it "chemical weathering only." A strong instructional move asks: Which evidence shows breakdown in place (weathering)? Which evidence shows movement (erosion/mass wasting)? What role did water play (saturation, runoff)? Connecting observations to the weathering–erosion–deposition sequence builds SEP skills (analyzing data, constructing explanations) on a high-frequency Earth science distinction.

Quick Self-Check Before You Continue

Weathering breaks down; erosion moves; deposition drops sediment.

Physical = size change; chemical = composition change; biological = organism-aided.

Water, ice, and wind leave different landform signatures (V vs. U valleys; dunes; wave-cut cliffs).

Landslide risk rises with steepness, water, weak materials, and vegetation loss; retaining walls and drainage are key mitigations.

Loading diagram... Weathering → Erosion → Deposition Sequence