Study guide
6.1 Spill Kits & Spill Response Procedures
PTCB Hazardous Drug Management Certificate Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
0.1 Exam Facts, Format & Eligibility 0.2 Content Outline, Scoring & Registration 0.3 USP <800> Big Picture & How to Use This Guide
2 USP <800> Program Administration
1.1 USP <800> Scope, Purpose & Enforcement 1.2 The NIOSH Hazardous Drug List (2024 Update) 1.3 Assessment of Risk 1.4 Designated Person, SOPs & the Hierarchy of Controls
3 Training, Compliance & Recordkeeping
2.1 Training Requirements & Medical Surveillance 2.2 Hazard Communication, SDS & OSHA Requirements 2.3 Recordkeeping & Professional Guidelines
4 Primary Engineering Controls
3.1 Containment Primary Engineering Controls (C-PEC): BSCs & CACIs 3.2 Closed System Transfer Devices (CSTDs) 3.3 Nonsterile Controls and the C-SCA Distinction
5 Secondary Engineering Controls & Facility Design
4.1 Containment Secondary Engineering Controls (C-SEC): Negative Pressure & Air Exchange 4.2 Facility Layout: Storage, Unpacking & Sink Placement 4.3 Certification, ISO Classes & Emergency Equipment
6 Facility Cleaning Procedures
5.1 The Four-Step Cleaning Process 5.2 Wipe Sampling & Action Levels 5.3 Hazardous Waste Disposal & RCRA
7 Spill Response & Cleaning PPE
6.1 Spill Kits & Spill Response Procedures 6.2 PPE During Cleaning: Glove Change Frequency & Disposal
8 Dispensing & the Compounding Interface
7.1 USP <795>/<797> Interface for Hazardous Drugs 7.2 High-Risk Oral Hazardous Drugs 7.3 Tablet Splitting & Crushing Restrictions
9 Counting, Packaging & Patient Counseling
8.1 Counting, Packaging & Dedicated Equipment 8.2 Patient Counseling & Unit-Dose Labeling
10 PPE: Gloves, Gowns & Task-Based Selection
9.1 ASTM D6978 Chemotherapy Gloves & Double Gloving 9.2 Chemo Gowns & Gown Change Frequency 9.3 Task-Based PPE Selection
11 Respiratory Protection, Eye Protection & PPE Sequencing
10.1 Respiratory & Eye/Face Protection 10.2 Donning & Doffing Sequence
12 Transport & Receiving
11.1 Receiving Hazardous Drug Shipments 11.2 Internal Transport & Storage 11.3 Damaged/Leaking Shipments & Chain of Custody
13 Exam Readiness & Final Review
12.1 Domain-by-Domain Quick Review 12.2 Common Exam Traps & Final Checklist
6.1 Spill Kits & Spill Response Procedures
Key Takeaways Explain This Topic AI
HD spill kits must be readily accessible everywhere HDs are stored, prepared, transported, administered, or received, not centralized in a single location.
A complete spill kit includes chemo-rated PPE, absorbents sized for the largest anticipated spill, a scoop or scraper, HD-labeled disposal bags, a warning sign, and a sharps container when needed.
The spill response sequence is fixed: alert and restrict access first, then don PPE (adding a respirator for powder, aerosol, volatile liquid, or large spills), contain from the outer edge inward, clean up per SOP, dispose in HD waste, document, and arrange follow-up cleaning.
Spill size (small vs. large) is set by a facility-defined threshold and determines both the PPE level required and whether EHS or emergency personnel must be involved.
Documentation after a spill must capture the drug's identity, the quantity spilled, the response actions taken, and any personnel exposure.
Last updated: July 2026
Spill Kits & Spill Response Procedures
Even the best-controlled hazardous drug (HD) workflow occasionally produces a spill — a dropped vial, a leaking IV bag, a container that cracks during unpacking. USP <800> and OSHA guidance both treat spill preparedness as a mandatory, not optional, part of an HD program: every location where HDs are stored, prepared, transported, administered, or received must have a spill kit within reach and a written procedure staff can follow without hesitation. On the PTCB Hazardous Drug Management exam, spill-kit contents and the step-by-step response sequence are tested heavily, because a technician who freezes or improvises during a real spill creates exposure risk for themselves and everyone nearby.
What Belongs in an HD Spill Kit
A spill kit is not just absorbent pads — it is a complete response toolkit sized for the worst spill reasonably expected at that location.
Component Purpose
Chemo-rated PPE (gown, double gloves, respirator or eye/face protection, shoe covers) Protects the responder from dermal and respiratory exposure while cleaning
- Absorbent pads / spill pillows Sized for the largest anticipated spill volume, not just a splash
- Scoop or scraper Collects glass shards or solid HD debris without direct hand contact
- HD/chemo-labeled disposal bags Segregates contaminated materials from regular trash
- “Caution” or spill warning sign Restricts area access while cleanup is underway
- Puncture-resistant sharps container Included when broken glass or needles may be present
Spill kits must be readily accessible at every point in the HD chain of custody — receiving, storage, compounding areas, transport routes, and administration sites (e.g., an infusion clinic). A kit that is locked in a supervisor's office or on another floor does not meet this standard.
Sizing the Response: Small vs. Large Spills
Facilities generally define a threshold volume (commonly measured in milliliters) that separates a small spill , which staff trained on the SOP can clean up themselves, from a large spill , which triggers additional steps such as notifying facility safety/EHS personnel or, in extreme cases, emergency responders. The threshold itself is facility-defined, but the exam expects you to know the concept: spill size drives both the level of PPE required and who must be involved, not just how much material needs to be wiped up.
The Spill Response Sequence
USP <800> spill response follows a consistent, logical order that shows up on the exam as sequencing questions:
- Step Action
- 1 Alert others and restrict access — post a warning sign around the area
2 Don full spill PPE, adding a respirator if the spill involves powder, aerosol, or volatile liquid, or exceeds the volume routine PPE was designed for
3 Contain the spill, working from the outer edge inward to prevent it from spreading
4 Absorb and clean up using the deactivating, decontaminating, and cleaning agents specified in the facility SOP
- 5 Dispose of all contaminated materials — pads, gloves, gown, scoop — in HD/chemo waste containers
- 6 Document the incident: what spilled, the quantity, the response taken, and any personnel exposure
- 7 Arrange follow-up cleaning and/or wipe sampling to confirm the area is decontaminated
Notice that alerting and restricting access comes before donning PPE and cleaning — the first priority is stopping additional people from walking into the contaminated area, not immediately touching the spill.
Why the Respirator Trigger Matters
A common exam trap tests whether you know when a respirator becomes mandatory during spill response. Routine spill PPE (gown, double gloves, eye protection) assumes a contained liquid spill. But if the HD is a powder (which can aerosolize into a respirable cloud) or a volatile liquid (which off-gasses vapor), or if the spill volume is larger than what the kit's routine PPE was designed to handle, a respirator (N95 or higher, per facility SOP) must be added before anyone approaches the spill.
Exam Tip: If a question mentions dust, powder, aerosol, or vapor, respiratory protection is required regardless of the spill's stated volume.
Exam Scenario
A compounding technician is unpacking a shipment when a vial of an HD in powder form shatters on the floor, releasing a visible dust cloud. The technician should NOT reach for the spill kit's standard gloves-and-gown PPE and start wiping immediately. Instead, the correct sequence is: post a warning sign and keep coworkers out of the area, don full spill PPE including a respirator (because the material is a powder capable of aerosolizing), contain the spill from the outside in, clean up with the SOP-specified agents, discard everything into HD waste, and document the event — including whether anyone was in the immediate area when the vial broke.
Key Takeaways for the Exam
Spill kits must be readily accessible everywhere HDs are stored, prepared, transported, administered, or received — not centralized in one location.
Kit contents scale to the largest anticipated spill: chemo PPE, sized absorbents, a scoop, HD-labeled disposal bags, a warning sign, and sharps containment if needed.
The response sequence is fixed: alert/restrict access, then don PPE (adding a respirator if powder, aerosol, volatile, or large), contain outer-to-inner, clean up, dispose in HD waste, document, and arrange follow-up cleaning.
Powder and volatile-liquid spills always require respiratory protection, regardless of the spill's physical size.
Documentation must capture the drug's identity, quantity spilled, actions taken, and any personnel exposure.