Study guide

1.4 Designated Person, SOPs & the Hierarchy of Controls

PTCB Hazardous Drug Management Certificate Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

0.1 Exam Facts, Format & Eligibility 0.2 Content Outline, Scoring & Registration 0.3 USP <800> Big Picture & How to Use This Guide

2 USP <800> Program Administration

1.1 USP <800> Scope, Purpose & Enforcement 1.2 The NIOSH Hazardous Drug List (2024 Update) 1.3 Assessment of Risk 1.4 Designated Person, SOPs & the Hierarchy of Controls

3 Training, Compliance & Recordkeeping

2.1 Training Requirements & Medical Surveillance 2.2 Hazard Communication, SDS & OSHA Requirements 2.3 Recordkeeping & Professional Guidelines

4 Primary Engineering Controls

3.1 Containment Primary Engineering Controls (C-PEC): BSCs & CACIs 3.2 Closed System Transfer Devices (CSTDs) 3.3 Nonsterile Controls and the C-SCA Distinction

5 Secondary Engineering Controls & Facility Design

4.1 Containment Secondary Engineering Controls (C-SEC): Negative Pressure & Air Exchange 4.2 Facility Layout: Storage, Unpacking & Sink Placement 4.3 Certification, ISO Classes & Emergency Equipment

6 Facility Cleaning Procedures

5.1 The Four-Step Cleaning Process 5.2 Wipe Sampling & Action Levels 5.3 Hazardous Waste Disposal & RCRA

7 Spill Response & Cleaning PPE

6.1 Spill Kits & Spill Response Procedures 6.2 PPE During Cleaning: Glove Change Frequency & Disposal

8 Dispensing & the Compounding Interface

7.1 USP <795>/<797> Interface for Hazardous Drugs 7.2 High-Risk Oral Hazardous Drugs 7.3 Tablet Splitting & Crushing Restrictions

9 Counting, Packaging & Patient Counseling

8.1 Counting, Packaging & Dedicated Equipment 8.2 Patient Counseling & Unit-Dose Labeling

10 PPE: Gloves, Gowns & Task-Based Selection

9.1 ASTM D6978 Chemotherapy Gloves & Double Gloving 9.2 Chemo Gowns & Gown Change Frequency 9.3 Task-Based PPE Selection

11 Respiratory Protection, Eye Protection & PPE Sequencing

10.1 Respiratory & Eye/Face Protection 10.2 Donning & Doffing Sequence

12 Transport & Receiving

11.1 Receiving Hazardous Drug Shipments 11.2 Internal Transport & Storage 11.3 Damaged/Leaking Shipments & Chain of Custody

13 Exam Readiness & Final Review

12.1 Domain-by-Domain Quick Review 12.2 Common Exam Traps & Final Checklist

1.4 Designated Person, SOPs & the Hierarchy of Controls

Key Takeaways Explain This Topic AI

USP <800> requires a designated person, qualified by education, training, and experience — not restricted to a pharmacist license — to lead the facility's HD-handling program.

The designated person's responsibilities include developing/maintaining SOPs, ensuring staff competencies, overseeing environmental quality and cleaning, and ensuring proper PPE and equipment use.

SOPs must cover the full HD lifecycle: receiving, storage, compounding, dispensing, administration, PPE, spill response, cleaning, and waste disposal.

The NIOSH hierarchy of controls ranks elimination/substitution, then engineering controls, then administrative controls, above PPE — investigate higher-priority controls before treating PPE upgrades as the fix.

Last updated: July 2026

Designated Person, SOPs & the Hierarchy of Controls

Quick Answer: USP <800> requires every facility handling hazardous drugs to appoint a qualified designated person responsible for developing, implementing, and maintaining HD-handling policies and procedures, ensuring staff competency, overseeing environmental quality and cleaning, and ensuring proper use of PPE and equipment. Facility policies should be built on the NIOSH hierarchy of controls — elimination/substitution, then engineering controls, then administrative controls (SOPs, training, signage, restricted access), with PPE as the last line of defense.

This section ties together the administrative-domain content: who is accountable for the HD program, what that person must produce (SOPs), and the risk-management framework (the hierarchy of controls) that should guide every decision the designated person makes.

The Designated Person: Role and Qualifications

USP <800> requires the facility to name a designated person — a single, accountable individual responsible for the facility's HD-handling program. This is not a title reserved for pharmacists only; the designated person must be qualified by education, training, and experience , and the role can be filled by a pharmacist, a nurse, or another qualified staff member depending on the setting, as long as they have the appropriate qualifications for the scope of the program they oversee.

Core designated-person responsibilities include:

Responsibility What It Covers

Develop, implement, and maintain policies/procedures Written SOPs covering every stage of HD handling: receiving, storage, compounding, dispensing, administration, cleaning, and disposal

Ensure competencies Staff must be trained and assessed before independently handling HDs, with documented, periodic competency reassessment

Oversee environmental quality and cleaning Ensuring surface sampling, cleaning schedules, and containment area certification occur as required

Ensure proper use of PPE and equipment Confirming staff select and use the correct PPE and engineering controls for each task

Exam trap: candidates sometimes assume the designated person must be a pharmacist because HD handling is "a pharmacy issue." USP <800> does not restrict the role to pharmacists — the requirement is qualification by education, training, and experience, not a specific license type. In a hospital, the designated person overseeing nursing-unit HD administration practices may be a nurse with appropriate training, working alongside a pharmacy designated person for compounding-area oversight.

SOPs: The Designated Person's Core Deliverable

Standard operating procedures (SOPs) are the written expression of the facility's HD program, and USP <800> expects them to cover the full lifecycle of HD handling — not just compounding. A complete SOP set typically addresses: receiving and unpacking; storage; compounding (sterile and nonsterile); dispensing and final-dosage-form handling; administration; PPE selection and use; spill response; deactivation, decontamination, cleaning, and disinfection; waste disposal; and training/competency assessment. SOPs must be reviewed periodically and updated whenever the NIOSH list, procedures, or facility layout changes.

The Hierarchy of Controls

The hierarchy of controls is a NIOSH occupational-safety model ranking risk-reduction strategies from most to least effective. USP <800>'s administrative expectations are built around applying this hierarchy in order, rather than jumping straight to PPE:

Elimination/substitution — the most effective control: remove the hazard entirely, or substitute a non-hazardous or less-hazardous alternative when clinically appropriate.

Engineering controls — physical controls that isolate personnel from the hazard, such as certified primary engineering controls (BSCs, CACIs) and secondary engineering controls (negative-pressure rooms).

Administrative controls — SOPs, training, signage, restricted access, and workflow/scheduling choices that reduce exposure without removing the hazard or relying on physical isolation.

PPE — the least effective control on its own, and the last line of defense , used because it depends entirely on correct selection and consistent human use rather than removing or isolating the hazard.

Exam trap: a question may describe a facility that responds to an HD exposure incident by buying more chemo gloves (PPE) instead of examining whether an engineering control failed or an SOP was not followed. The hierarchy of controls says PPE should be the last layer added, not the first fix reached for — a facility investigating an exposure should look up the hierarchy (engineering and administrative controls) before assuming better PPE alone will solve the problem.

Exam Scenario

An infusion center director learns that a nurse was splashed with a hazardous drug during administration. Her first instinct is to order new, thicker chemo gloves for the unit. A better answer, applying the hierarchy of controls, is to first investigate whether an administrative control failed (was the SOP for that administration step followed? was the nurse trained and competent?) and whether an engineering control was appropriate and available (a closed system transfer device, for example) before concluding that PPE alone is the fix. The designated person is responsible for this kind of root-cause review and for updating SOPs and training based on the findings — PPE upgrades may still be part of the response, but only after the higher-priority controls have been evaluated.

Key Takeaways

USP <800> requires a designated person, qualified by education/training/experience, who develops and maintains HD policies, ensures competencies, oversees environmental quality/cleaning, and ensures proper PPE/equipment use.

The designated person role is not restricted to pharmacists — qualification, not license type, is the requirement.

SOPs must cover the full HD lifecycle: receiving, storage, compounding, dispensing, administration, PPE, spill response, cleaning, and disposal.

The hierarchy of controls ranks elimination/substitution first, then engineering controls, then administrative controls, with PPE as the last, least effective line of defense — apply it in that order when investigating or preventing exposure.