Study guide
3.3 Liquid Dosage Forms
PTCB Nonsterile Compounding Certificate Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Regulations, Standards, and Governance
1.1 Federal Regulations Framework (FD&C Act, DQSA, Sections 503A vs 503B) 1.2 USP Standards & Applicability (<795>, <800>, <1163>) 1.3 Personnel Roles, Training, and Hygiene Standards 1.4 Documentation, Master Formulation Records, and Compounding Records
2 Chapter 2: Facilities, Material Management, and Stability
2.1 Facilities, Environmental Controls, and Equipment 2.2 Material Sourcing, Component Selection & Inventory Controls 2.3 Beyond-Use Dates (BUDs), Stability & Packaging
3 Chapter 3: Nonsterile Dosage Forms & Formulations
3.1 Solid Dosage Forms & Compounding 3.2 Semisolid Dosage Forms 3.3 Liquid Dosage Forms 3.4 Specialized Topical & Transdermal Formulations
4 Chapter 4: Equipment, Utensils, and Processing Tools
4.1 Weighing and Volumetric Equipment 4.2 Mixing and Comminution Utensils
5 Chapter 5: Pharmaceutical Compounding Calculations
5.1 Weighing, Measuring, Aliquot Calculations, & Powder Volume Adjustments 5.2 Concentration, Alligation, Dilution, & Dosing Calculations
6 Chapter 6: Compounding Procedures, Garbing, and Hazardous Drug Safety
6.1 Garbing, Hand Hygiene, and Personal Protective Equipment for Nonsterile Compounding 6.2 Hazardous Drug Handling and USP <800> Compliance in Nonsterile Compounding 6.3 Packaging, Container-Closure Systems, Storage, and Quality Assurance
7 Chapter 7: Quality Assurance, Sanitation, and Risk Management
7.1 Cleaning, Sanitizing, and Facility Sanitation Protocols 7.2 Environmental Monitoring, Equipment Calibration, and Maintenance 7.3 Quality Control, Product Verification, and Release Testing 7.4 Quality Assurance Systems, Customer Complaints, and Product Recalls
3.3 Liquid Dosage Forms
Key Takeaways Explain This Topic AI
Solutions are monophasic homogeneous mixtures where dissolution rate is described by Noyes-Whitney principles (surface area, agitation, temperature, solute concentration gradient).
Syrups NF contain 85% w/v (65% w/w) sucrose, creating a hypertonic, self-preserving vehicle with a water activity below 0.86 that inhibits microbial proliferation without added chemical preservatives.
Elixirs are clear hydroalcoholic solutions (5–40% alcohol) capable of dissolving both water-soluble and alcohol-soluble active ingredients; water must always be added to the alcoholic phase to avoid precipitation.
Sedimentation velocity of coarse suspensions is governed by Stokes' Law (v = [d^2 * (rho_p - rho_m) * g] / [18 * eta]); reducing particle size and increasing vehicle viscosity slows settling.
For a fixed vegetable oil, the Continental dry-gum method commonly uses a 4:2:1 primary-emulsion ratio of oil : water : acacia; other oil classes may use different ratios.
Last updated: August 2026
3.3 Liquid Dosage Forms
Compounded liquid dosage forms are classified into monophasic systems (solutions, syrups, elixirs, spirits, tinctures) and biphasic systems (suspensions and emulsions). Monophasic systems contain molecularly dissolved active ingredients in a single homogeneous phase. Biphasic systems consist of two immiscible phases (solid-in-liquid or liquid-in-liquid) requiring physical stabilization.
- Monophasic Liquids: Solvents, Kinetics, & Formulations
- Solvents Used in Nonsterile Compounding
Purified Water USP: Obtained by distillation, ion exchange, or reverse osmosis. Contains no added substances. Used as the primary solvent for oral and topical aqueous preparations. (Note: Nonsterile Purified Water USP must never be used for parenteral/ophthalmic compounding).
Alcohol USP: Contains 94.9% to 96.0% v/v C2H5OH (ethanol) at 15.56°C. Excellent solvent for lipophilic organic molecules, resins, and volatile oils.
Diluted Alcohol NF: Prepared by mixing equal volumes of Purified Water USP and Alcohol USP. Due to volumetric contraction upon mixing, the final concentration is approximately 49% v/v ethanol .
Glycerin USP (Glycerol): Clear, viscous, sweet liquid miscible with water and alcohol. It acts as a co-solvent and humectant. Any preservative effect depends on the complete formulation and validated concentration; do not assume a universal threshold.
Propylene Glycol USP: Clear, viscous solvent miscible with water and alcohol; frequently replaces glycerin.
Fixed Vegetable Oils: Corn oil, sesame oil, peanut oil, olive oil. Used as vehicles for lipophilic drugs or oral/topical oil solutions.
Dissolution Kinetics: Noyes-Whitney Equation
The rate at which a solid solute dissolves in a liquid solvent is described by the Noyes-Whitney Equation :
- Dissolution Rate (dC/dt) = (D * A / h) * (C_s - C)
- D = Diffusion coefficient of solute
- A = Surface area of solid particles
- h = Thickness of stagnant diffusion layer surrounding particles
- C_s = Saturation solubility of solute in solvent
- C = Solute concentration in bulk solvent at time t
Practical Compounding Implications: Technicians accelerate dissolution by reducing particle size (increasing surface area A via trituration) and vigorously stirring/agitating the solution (decreasing diffusion layer thickness h ).
Formulations: Syrups, Elixirs, Spirits, & Tinctures
Dosage Form Composition & Vehicle Alcohol Content Self-Preserving Properties Compounding Key Rules
Syrup NF (Simple Syrup) 85% w/v (65% w/w) Sucrose in Purified Water (sp. gr. = 1.313) 0% High osmotic pressure (Water Activity < 0.86) inhibits bacterial growth; self-preserving without chemical preservatives Do not overheat during preparation to avoid caramelization and inversion into glucose/fructose.
Elixir Clear, sweetened hydroalcoholic solution 5% to 40% v/v Self-preserving if alcohol concentration exceeds 10–12% v/v Always add aqueous phase to alcoholic phase to maintain alcohol concentration and prevent drug precipitation.
Spirit Alcoholic or hydroalcoholic solution of volatile substances (e.g., Peppermint Spirit) 60% to 90% v/v Self-preserving Keep tightly closed to prevent evaporation of volatile components.
Tincture Alcoholic or hydroalcoholic extract from plant materials or chemicals 15% to 80% v/v Self-preserving Prepared by maceration or percolation; incompatible with aqueous vehicles.
Biphasic Liquids: Suspensions & Stokes' Law
A pharmaceutical suspension is a coarse dispersion of finely divided insoluble solid drug particles (0.5 to 50 micrometers) distributed throughout a liquid vehicle.
Flocculated vs. Deflocculated Suspensions
Deflocculated Suspensions: Solid particles exist as individual species. Particles settle slowly, but once settled, they form a dense, tightly packed cake at the bottom of the bottle due to secondary energy minimum attraction. This caking is irreversible and cannot be resuspended by shaking.
Flocculated Suspensions: Solid particles form loose, fluffy aggregates (flocs) held by weak van der Waals forces. Flocs settle rapidly, leaving a clear supernatant liquid, but are easily resuspended with minimal shaking . Flocculating agents include electrolytes (e.g., monobasic potassium phosphate) and ionic surfactants.
Stokes' Law of Sedimentation
The rate of particle settling in a coarse suspension is governed by Stokes' Law :
- v = [ d^2 * (rho_p - rho_m) * g ] / (18 * eta)
- v = Sedimentation velocity (cm/s)
- d = Particle diameter (cm)
- rho_p = Density of solid particle (g/cm³)
- rho_m = Density of liquid medium (g/cm³)
- g = Gravitational acceleration (980 cm/s²)
- eta = Dynamic viscosity of liquid medium (poise or Pa.s)
Strategies to Minimize Sedimentation Rate (v):
Reduce particle diameter (d): Micronizing solid powder via trituration dramatically decreases velocity because v is proportional to d^2 .
Increase vehicle viscosity (eta): Adding hydrocolloid suspending agents (e.g., Xanthan gum, Methylcellulose, Sodium CMC, Ora-Plus) increases viscosity, slowing settling.
Match densities (rho_p ~ rho_m): Increasing vehicle density with syrup or sorbitol reduces density difference.
Wetting Agents
Hydrophobic drug powders (e.g., sulfur, hydrocortisone) entrap air and float on aqueous vehicles. Technicians must incorporate a wetting agent (e.g., Glycerin, Propylene Glycol, or Polysorbate 80) to displace air, lower the contact angle, and allow uniform vehicle penetration before adding suspending agents.
Biphasic Liquids: Emulsions & The HLB System
An emulsion is a thermodynamically unstable biphasic system consisting of two immiscible liquid phases (Oil and Water) stabilized by an emulsifying agent.
The Hydrophilic-Lipophilic Balance (HLB) System
Surfactants are assigned an HLB value ranging from 1 to 20 based on their molecular affinity for water or oil:
HLB 3 to 6: Lipophilic surfactants (e.g., Sorbitan monooleate / Span 80) -> Form Water-in-Oil (W/O) emulsions.
HLB 8 to 18: Hydrophilic surfactants (e.g., Polysorbate 80 / Tween 80, Acacia) -> Form Oil-in-Water (O/W) emulsions.
Primary Emulsion Preparation Methods
To form a stable O/W primary emulsion using fixed oil, water, and acacia gum, technicians use specific stoichiometric ratios:
Fixed Oil Ratio: 4 parts Oil : 2 parts Water : 1 part Acacia (4:2:1)
(For Volatile Oils, use a 2:2:1 or 3:2:1 ratio).
Continental (Dry Gum) Method (4:2:1):
Triturate 4 parts Oil with 1 part Acacia powder in a dry porcelain mortar until smooth.
Add 2 parts Water all at once .
Triturate rapidly and continuously in one direction until a crackling sound is heard and a thick, creamy white primary emulsion forms.
Add remaining aqueous vehicle and liquid ingredients in small portions with trituration to final volume.
English (Wet Gum) Method (4:2:1):
Triturate 1 part Acacia with 2 parts Water in a mortar to form a mucilage.
Add 4 parts Oil slowly in small increments while triturating continuously.
Forbes (Bottle) Method:
Used for volatile or low-viscosity oils. Oil and acacia are shaken in a capped bottle, followed by water addition.
Physical Instability of Emulsions
Flocculation: Droplets aggregate into clusters without losing individual identity; reversible by shaking.
Creaming: Migration of droplets upward (if oil in O/W) or downward under gravity; reversible by shaking.
Coalescence & Breaking (Cracking): Droplets fuse together into larger droplets until complete phase separation occurs. Irreversible ; cracked emulsions must be discarded.
- Worked Numerical Examples
- Worked Example 1: Continental Method (4:2:1) Primary Emulsion Formulation
Scenario: A pharmacy technician receives an order to compound 120 mL of Sesame Oil Emulsion USP (50% v/v sesame oil) using the Continental (Dry Gum) method. Calculate the required volumes of Sesame Oil, Purified Water for the primary emulsion, mass of Acacia gum powder, and final volume adjustment.
Solution Steps:
Determine total Sesame Oil required:
- Total Emulsion Volume = 120 mL
- Sesame Oil Volume = 120 mL * 0.50 = 60 mL Sesame Oil
Apply Continental 4:2:1 Ratio (Oil : Water : Gum):
- Oil parts = 4 parts = 60 mL
- 1 part = 60 mL / 4 = 15 mL equivalent mass
- Water parts = 2 parts = 2 * 15 mL = 30 mL Purified Water (for primary emulsion)
- Acacia parts = 1 part = 1 * 15 g = 15 g Acacia Powder
Formulation Breakdown:
- Sesame Oil = 60 mL
- Acacia Powder = 15 g
- Purified Water (Primary) = 30 mL
Purified Water = q.s. ad 120 mL after the primary emulsion forms. Do not calculate this by simple subtraction: acacia contributes mass and dispersed volume, and mixed volumes are not necessarily additive.
Compounding Execution: In a clean, dry mortar, combine 60 mL sesame oil and 15 g acacia. Add the 30 mL primary water at once and triturate vigorously until the primary emulsion forms. Transfer and add purified water in portions, rinsing the mortar, then q.s. the final preparation to 120 mL in suitable volumetric equipment. Package as directed by the master formulation.
Worked Example 2: Stokes' Law Sedimentation Velocity Calculations
Scenario: A suspension formulation has insoluble drug particles of diameter d1 = 40 micrometers (0.004 cm) settling at a velocity of v1 = 0.08 cm/min in an un-thickened vehicle. Calculate the new sedimentation velocity ( v2 ) if the technician triturates the drug to reduce particle diameter to d2 = 20 micrometers (0.002 cm) and adds Xanthan gum to double the vehicle viscosity ( eta2 = 2 * eta1 ).
Solution Steps:
Recall Stokes' Law proportionality:
v is directly proportional to d^2 and inversely proportional to eta:
v2 / v1 = (d2 / d1)^2 * (eta1 / eta2)
Calculate ratio of particle diameters squared:
(d2 / d1)^2 = (20 / 40)^2 = (0.5)^2 = 0.25
Calculate ratio of viscosities:
eta1 / eta2 = eta1 / (2 * eta1) = 0.50
Calculate new sedimentation velocity (v2):
- v2 / v1 = 0.25 * 0.50 = 0.125
- v2 = 0.08 cm/min * 0.125 = 0.010 cm/min
Conclusion: Combining particle reduction (trituration) and viscosity doubling reduces particle settling rate by 87.5% (from 0.08 cm/min down to 0.010 cm/min).