Study guide
2.2 Material Sourcing, Component Selection & Inventory Controls
PTCB Nonsterile Compounding Certificate Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Regulations, Standards, and Governance
1.1 Federal Regulations Framework (FD&C Act, DQSA, Sections 503A vs 503B) 1.2 USP Standards & Applicability (<795>, <800>, <1163>) 1.3 Personnel Roles, Training, and Hygiene Standards 1.4 Documentation, Master Formulation Records, and Compounding Records
2 Chapter 2: Facilities, Material Management, and Stability
2.1 Facilities, Environmental Controls, and Equipment 2.2 Material Sourcing, Component Selection & Inventory Controls 2.3 Beyond-Use Dates (BUDs), Stability & Packaging
3 Chapter 3: Nonsterile Dosage Forms & Formulations
3.1 Solid Dosage Forms & Compounding 3.2 Semisolid Dosage Forms 3.3 Liquid Dosage Forms 3.4 Specialized Topical & Transdermal Formulations
4 Chapter 4: Equipment, Utensils, and Processing Tools
4.1 Weighing and Volumetric Equipment 4.2 Mixing and Comminution Utensils
5 Chapter 5: Pharmaceutical Compounding Calculations
5.1 Weighing, Measuring, Aliquot Calculations, & Powder Volume Adjustments 5.2 Concentration, Alligation, Dilution, & Dosing Calculations
6 Chapter 6: Compounding Procedures, Garbing, and Hazardous Drug Safety
6.1 Garbing, Hand Hygiene, and Personal Protective Equipment for Nonsterile Compounding 6.2 Hazardous Drug Handling and USP <800> Compliance in Nonsterile Compounding 6.3 Packaging, Container-Closure Systems, Storage, and Quality Assurance
7 Chapter 7: Quality Assurance, Sanitation, and Risk Management
7.1 Cleaning, Sanitizing, and Facility Sanitation Protocols 7.2 Environmental Monitoring, Equipment Calibration, and Maintenance 7.3 Quality Control, Product Verification, and Release Testing 7.4 Quality Assurance Systems, Customer Complaints, and Product Recalls
2.2 Material Sourcing, Component Selection & Inventory Controls
Key Takeaways Explain This Topic AI
Bulk drug substances used under Section 503A must come from an FDA-registered establishment and satisfy applicable statutory eligibility; USP <795> recommends registered-facility sourcing for other components when possible.
Use an applicable USP–NF monograph when one exists; FCC, ACS, food, reagent, technical, or industrial labels do not automatically establish pharmaceutical suitability.
A component without a manufacturer expiration date receives an assigned expiration date no later than three years after receipt, subject to proper storage and evidence of continued quality.
FEFO or an equivalent controlled inventory system, required hazard segregation, SDS access, and controlled-substance security reduce selection and storage errors.
Trace each component by exact identity and form, manufacturer, lot, CoA/specification, receipt and expiration dates, and quantity used in the compounding record.
Last updated: August 2026
2.2 Material Sourcing, Component Selection & Inventory Controls
Quick Answer: Component identity, quality, suitability, lot traceability, and storage drive CNSP quality. Under Section 503A, bulk drug substances (APIs) must come from an FDA-registered establishment and satisfy applicable statutory eligibility; USP <795> recommends, but does not universally require, registered-facility sourcing for other components. A lot-specific Certificate of Analysis supports verification. A component without a manufacturer expiration date receives an assigned expiration date no later than three years after receipt.
Quality Standards and Chemical Grade Hierarchy
The safety, identity, strength, purity, and quality of a compounded nonsterile preparation (CNSP) depend directly on the quality of its raw bulk ingredients. Compounding technicians must understand chemical purity classifications and sourcing rules set forth by USP <795> and the Federal Food, Drug, and Cosmetic Act (FDCA).
Official Compendial vs Non-Compendial Chemical Grades
Bulk chemicals are manufactured to varying degrees of purity depending on their intended industrial, analytical, or medical application. When an applicable USP–NF monograph exists, the component must comply with it. A noncompendial label such as food, FCC, ACS, or reagent grade does not itself prove suitability for a drug preparation; evaluate identity, quality, intended route, impurities, the CoA, and applicable law.
Chemical Grade Purity Standard Suitability for Compounding Primary Use & Regulatory Status
USP Grade Conforms to an applicable USP monograph Use when an applicable monograph exists Official compendial quality standard
NF Grade Conforms to an applicable NF monograph Use when an applicable monograph exists Official compendial quality standard, often for excipients
FCC Grade Conforms to Food Chemicals Codex specifications Evaluate; not automatically acceptable Food-quality specification that may not address the intended drug route
ACS Reagent Grade Conforms to ACS reagent specifications Evaluate; not automatically acceptable Laboratory specification, not a pharmaceutical suitability determination
CP (Chemically Pure) Grade Noncompendial designation with variable specifications Do not presume suitable Requires documented evaluation and compliance with applicable law
Technical / Industrial Grade Intended for industrial use, not drug quality Do not presume suitable Grade name alone cannot establish lawful pharmaceutical quality
Sourcing Controls under FDCA & USP <795>
Bulk drug substances (APIs): For Section 503A compounding, APIs must be manufactured by an establishment registered under FDCA Section 510 and meet the other applicable Section 503A conditions.
Other components: USP <795> recommends obtaining components from FDA-registered facilities when possible. Verify identity and quality against an applicable monograph or documented specification.
Noncompendial grades: FCC, ACS, food, reagent, technical, or industrial labels are not automatic substitutes for USP–NF quality. The designated person must establish suitability and legal permissibility before use.
Certificate of Analysis (CoA) Verification
A Certificate of Analysis (CoA) is an official quality control document provided by the bulk chemical manufacturer for a specific, matching lot number of a raw ingredient. A CoA details the laboratory testing results performed on that specific batch to verify that it meets compendial monograph standards.
Critical Information Fields on a CoA
Manufacturer Name & Registration: Proves sourcing from an authorized chemical manufacturer.
Chemical Name & CAS Number: Identifies the precise chemical structure and salt form (e.g., Hydrocortisone Acetate vs Hydrocortisone Base).
Lot / Batch Number: Must match the exact lot number printed on the bulk container label.
Assay Purity / Potency Percentage: Quantifies the exact percentage of active drug present (e.g., 99.4% pure).
Loss on Drying / Water Content: Indicates moisture content present in the raw powder, which affects net weighing calculations.
Melting Range, Heavy Metals, & Residual Solvents: Confirms physical constants and safety parameters within USP limits.
Expiration Date or Re-test Date: Establishes the manufacturer's validated stability period.
Potency Calculations Based on CoA Assay Factors
When a raw API powder has an assay value different from 100% (or contains significant moisture), the technician must adjust the weighed quantity to ensure the patient receives 100% of the prescribed active drug dose.
Potency Adjustment Formula:
- Required Weight of Bulk Powder = Target API Dose / Purity Factor (Assay Decimal)
- Worked Example: API Potency Adjustment
Prescription Order: Compound 100 capsules, each containing 50 mg of Active API "Drug X" (Total active target weight = 5,000 mg = 5.0 g).
CoA Data: The CoA for the bulk "Drug X" powder lot reveals an assay purity of 95.0% (0.95) .
Calculation: Required Weight of Bulk Powder = 5,000 mg / 0.95 = 5,263.16 mg (5.263 g)
Interpretation: To deliver 5,000 mg of pure active "Drug X," the technician must weigh 5,263.16 mg of the raw bulk powder. Weighing only 5,000 mg would under-dose the patient by 5%.
Component Expiration Dating Protocols (USP <795>)
Every bulk chemical container used in compounding must have a verified expiration date. Technicians must strictly distinguish between manufacturer expiration dates and assigned dates for un-dated components.
Manufacturer Expiration Date Rules
If the bulk component container bears a manufacturer expiration date , the component must not be used beyond that date. Any remaining chemical must be immediately quarantined and disposed of according to pharmacy SOPs.
Assigning Dates to Components Lacking Manufacturer Expiration Dates
Occasionally, bulk chemicals, excipients, or food-grade additives (e.g., flavorings, coloring agents) arrive from suppliers without a manufacturer expiration date printed on the container label. Under revised USP <795> , the compounder must adhere to the following protocol:
Maximum Assigned Expiration Limit: The compounder must assign a conservative expiration date that does not exceed 3 years from the date of receipt by the pharmacy.
Quality Evaluation: The 3-year maximum applies only if the chemical is stored in its original sealed container under appropriate environmental conditions (CRT, low humidity) and shows no visual evidence of physical or chemical deterioration (e.g., discoloration, caking, odor change).
Mandatory Container Labeling upon Receipt: Immediately upon receiving any un-dated component container, the technician must affix an auxiliary label stating:
- Date of Receipt
- Assigned Expiration Date (maximum 3 years from receipt date)
- Initials of Receiving Technician/Pharmacist
- Inventory Control, Storage Segregation, and FEFO Protocols
Proper inventory management prevents component deterioration, avoids costly waste, and ensures that expired ingredients are never inadvertently compounded into patient medications.
FEFO (First Expired, First Out) vs FIFO (First In, First Out)
In standard retail merchandising, stock rotation often follows First In, First Out (FIFO). However, in pharmaceutical compounding, First Expired, First Out (FEFO) is mandatory.
FEFO Principle: Containers of bulk chemicals with the earliest expiration date must be placed at the front of storage shelves and used first, regardless of when they arrived at the pharmacy. Stock must be audited monthly to identify items nearing expiration.
Storage Segregation Requirements
General Non-Hazardous APIs & Excipients: Stored in clean, organized cabinets or shelving off the floor at Controlled Room Temperature (20°C to 25°C).
Hazardous Drug Bulk Powders (USP <800>): Must be stored separately from non-hazardous drugs in a dedicated, negative-pressure storage room (or inside the nonsterile HD C-SEC) with at least 12 ACPH to prevent contamination from container breakage or dust escape.
Flammable Solvents (e.g., 95% Ethanol, Isopropanol, Acetone): Must be stored inside an OSHA/NFPA-approved Flammable Liquid Safety Cabinet . Flammables must never be stored near open flames, electrical heat sources, or hot plates.
Controlled Substances (DEA Schedules II–V): Store bulk controlled substances with the physical security, inventory, access, and record controls required for the registrant and schedule under DEA and state rules. Do not infer one universal safe or vault specification.
Hazard Communication Standard (OSHA HAZCOM) & Safety Data Sheets (SDS)
The Occupational Safety and Health Administration ( OSHA ) Hazard Communication Standard (29 CFR 1910.1200) mandates that employees have a "right to know" and a "right to understand" the health and physical hazards associated with chemical substances in the workplace.
Safety Data Sheets (SDS) Structure
Every chemical container in the pharmacy must have a corresponding Safety Data Sheet (SDS) on file, accessible immediately to technicians. Under the Globally Harmonized System (GHS), an SDS consists of 16 standardized sections :
- SDS Section Number Section Title Critical Pharmacy Technician Information
- Section 2 Hazard Identification GHS pictograms, Signal Words ("Danger" vs "Warning"), hazard statements
- Section 4 First-Aid Measures Instructions for skin/eye contact, inhalation, or accidental ingestion
- Section 8 Exposure Controls / PPE Required personal protective equipment (gloves, respirators, eye protection)
- Section 10 Stability and Reactivity Incompatible chemicals, decomposition hazards, conditions to avoid
- Section 13 Disposal Considerations Safe chemical waste disposal and hazardous waste classifications
- GHS Signal Words and Pictograms
"Danger": Used for severe hazard classifications (e.g., severe toxicity, carcinogens, strong corrosives).
"Warning": Used for less severe hazard categories.
Material Traceability & Master Component Logging
To maintain complete product traceability in the event of a drug recall or quality failure, USP <795> mandates meticulous record-keeping for all raw materials.
Component Master Inventory Log Requirements
When a raw component is opened and used in compounding, the technician must record the following details in the Component Master Log (or electronic pharmacy management system):
- Official Chemical Name & Salt Form
- Manufacturer & Supplier Name
- Manufacturer Lot / Batch Number
- Certificate of Analysis (CoA) Verification (Yes/No)
- Manufacturer Expiration Date (or Assigned 3-Year Date)
- Pharmacy Internal Receipt Date & Package Control Number
- Storage Location & Special Environmental Requirements