Study guide

4.1 Unsignalized Intersections (TWSC, AWSC) & Modern Roundabouts Capacity

Professional Traffic Operations Engineer PTOE

Track your progress as you read

Finished sections get a check mark.

1 Introduction & PTOE Exam Overview

1.1 The PTOE Credential: Certification Overview & Industry Value 1.2 Core Industry Reference Standards in Traffic Operations 1.3 Study Guide Architecture, Blueprint Alignment & Exam-Day Strategy

2 Domain 1: Traffic Flow Theory & Fundamental Concepts

2.1 Macroscopic Traffic Stream Models & Fundamental Diagram (q = k × u) 2.2 Microscopic Traffic Characteristics & Car-Following Models 2.3 Hydrodynamic Shockwave Analysis & Traffic Queuing Models

3 Domain 1: Highway & Interrupted Flow Capacity Analysis (HCM)

3.1 Basic Freeway Segments & Multilane Highways (HCM 7th Edition) 3.2 Freeway Weaving, Merging, and Diverging Segments 3.3 Signalized Intersection Capacity & Delay Modeling (HCM)

4 Domain 1: Managed Lanes, Transit Priority, TSMO & Travel Demand Management

4.1 Unsignalized Intersections (TWSC, AWSC) & Modern Roundabouts Capacity 4.2 Managed Lanes, HOV/HOT Operations, & Ramp Metering 4.3 Transit Priority & Multimodal Signal Operations (TSP) 4.4 Transportation Systems Management and Operations (TSMO) & Regional ITS 4.5 Travel Demand Management (TDM) & Trip Reduction Strategies

5 Domain 2: Geometric Design Controls, Criteria, & Sight Distance

5.1 Functional Classification, Design Controls, & Context-Sensitive Design 5.2 Sight Distance Principles: Stopping, Decision, & Passing (AASHTO) 5.3 Horizontal Alignment, Curve Radius, & Superelevation Design

6 Domain 2: Roadway Cross-Sections & Access Management

6.1 Vertical Alignment: Tangent Grades, Crest & Sag Vertical Curves 6.2 Roadway Cross-Section Elements & AASHTO Clear Zone Concepts 6.3 Access Management Principles & Driveway Spacing Criteria

7 Domain 2: Intersection & Interchange Geometric Design

7.1 Intersection Channelization, Turn Lane Design, & Storage Length 7.2 Interchange Configurations & Operational Comparisons (Diamond, Cloverleaf, SPUI) 7.3 Diverging Diamond Interchanges (DDI / DCMI) Operational Principles 7.4 Modern Roundabout Geometric Design Elements & Fastest Paths 7.5 Multimodal Geometric Design: Pedestrian Facilities, Bikeways, & ADA

8 Domain 3: Traffic Safety Concepts, Human Factors, & Safe System

8.1 The Safe System Approach & Vision Zero Principles 8.2 Human Factors, Driver Expectancy, & Perception-Reaction Time (PRT) 8.3 Crash Collision Typologies & Statistical Rate Formulations (MEV, MVMT)

9 Domain 3: Highway Safety Manual (HSM) Predictive Methods & EB

9.1 Highway Safety Manual (HSM) Predictive Methodology & Part C Models 9.2 Safety Performance Functions (SPFs) & Crash Modification Factors (CMFs) 9.3 Empirical Bayes (EB) Method & Regression-to-the-Mean (RTM) Correction 9.4 Economic Appraisal of Safety Projects (Benefit-Cost Analysis, NPV)

10 Domain 3: Safety Countermeasures & Road Safety Audits (RSA)

10.1 Roadway Departure Countermeasures (Rumble Strips, Safety Edge, Barriers) 10.2 Intersection Safety Countermeasures (Sight Triangles, Left-Turn Calming, Roundabouts) 10.3 Vulnerable Road User (VRU) Safety Countermeasures (PHB/HAWK, RRFB, Curb Extensions) 10.4 Road Safety Audits (RSAs) & Systemic Safety Analysis

11 Domain 4: Traffic Signal Warrants & Isolated Timing (MUTCD/ITE)

11.1 MUTCD Traffic Signal Warrants (Warrants 1 through 9) 11.2 Signal Phasing Principles & NEMA Dual-Ring Operations 11.3 Clearance Intervals (ITE Kinematic Equations) & Pedestrian Timing Parameters

12 Domain 4: Signal Coordination, Networks, & ATSPMs

12.1 Actuated Signal Controller Parameters (Passage Time, Gap Reduction, Max Recall) 12.2 Traffic Signal Coordination: Bandwidth, Offsets, & Progression Models 12.3 Traffic Responsive & Adaptive Traffic Signal Control Systems (ASCS) 12.4 Automated Traffic Signal Performance Measures (ATSPMs) & High-Resolution Data

13 Domain 4: Signing, Markings, Work Zones, Grade Crossings & School Zones (MUTCD)

13.1 MUTCD Regulatory, Warning, & Guide Signs Principles and Placement 13.2 Sign Retroreflectivity Standards & Nighttime Visual Maintenance 13.3 Longitudinal Pavement Markings, Delineators, & Object Markers 13.4 Temporary Traffic Control (TTC) & Work Zone Safety (MUTCD Part 6) 13.5 Highway-Rail Grade Crossings: Warning Devices, Preemption & Storage 13.6 School Zone Traffic Control & Student Walk Route Planning

14 Domain 5: Traffic Studies & Applied Statistical Methods

14.1 Applied Statistical Distributions & Sample Size Determination 14.2 Spot Speed Studies, 85th Percentile Speed, & 10-mph Pace 14.3 Volume Count Methodologies & Expansion Factoring (ADT, AADT, PHF)

15 Domain 5: Traffic Impact Studies & Trip Generation (ITE)

15.1 Travel Time, Delay, & Intersection Queue Studies 15.2 Parking Supply, Duration, & Turnover Analysis 15.3 Traffic Impact Study (TIS) Scoping, Horizon Years, & Mitigation 15.4 ITE Trip Generation Handbook: Average Rates vs. Regression Equations

16 Domain 6: Environmental, Institutional, Ethics & Equity Issues

16.1 Vehicle Emissions, Air Quality Conformity, & Decarbonization 16.2 Traffic Noise Modeling (TNM) & Noise Abatement Criteria (NAC) 16.3 Long-Range Transportation Planning & the NEPA Environmental Review 16.4 Professional Engineering Ethics, Tort Liability, & Risk Management 16.5 Transportation Equity, Access & Multimodal Community Considerations

4.1 Unsignalized Intersections (TWSC, AWSC) & Modern Roundabouts Capacity

Key Takeaways Explain This Topic AI

Two-Way Stop-Controlled (TWSC) intersection capacity is governed by gap acceptance theory, where minor movements cross or merge into conflicting traffic streams based on critical headway (t_c) and follow-up headway (t_f).

Movement priority at TWSC intersections is strictly defined across Ranks 1 through 4, requiring lower-ranked movements to yield to all higher-ranked conflicting flows and undergo capacity reductions via impedance factors.

All-Way Stop-Controlled (AWSC) capacity relies on an iterative probability model evaluating 5 service regimes ranging from isolated single-vehicle arrivals (Regime 1) to all-approach concurrent queues (Regime 5).

Modern roundabout entry capacity follows exponential regression formulations (c_e = A * exp(-B * v_c)) based on circulating conflicting flow (v_c), differing fundamentally from traditional traffic circles by enforcing yield-at-entry and deflection geometry.

Unsignalized intersection Level of Service (LOS) thresholds are more stringent than signalized thresholds due to higher driver delay sensitivity: LOS A (<= 10 s/veh) through LOS F (> 50 s/veh).

Last updated: August 2026

Unsignalized Intersections & Modern Roundabouts Capacity

Unsignalized intersections—encompassing Two-Way Stop-Controlled (TWSC) intersections, All-Way Stop-Controlled (AWSC) intersections, and Modern Roundabouts —rely on driver gap acceptance, spatial yielding behavior, and right-of-way rules rather than fixed or actuated signal phases. Analyzing their operational performance under the Highway Capacity Manual (HCM 7th Edition) requires understanding conflicting traffic streams, critical headways, follow-up times, and geometric deflection parameters.

1. Two-Way Stop-Controlled (TWSC) Intersections

At a TWSC intersection, major-street through and right-turning vehicles proceed unimpeded, while major-street left turns and all minor-street movements must yield right-of-way to conflicting traffic streams. The capacity of each subordinate movement depends strictly on the availability of acceptable time gaps in the conflicting traffic stream ( v c v_c v c ​ ). +-----------------------------------------------------------------------------+

  • | TWSC GAP ACCEPTANCE PARAMETERS (HCM) |
  • +-----------------------------------------------------------------------------+
  • | Parameter | Definition |
  • +----------------------------+------------------------------------------------+
  • | Critical Headway (t_c) | Minimum time interval in conflicting stream |
  • | | required for one minor vehicle to enter/cross. |
  • | Follow-Up Headway (t_f) | Time headway between departure of successive |
  • | | queued minor vehicles entering the SAME gap. |
  • | Conflicting Flow (v_c) | Total hourly equivalent flow rate of higher- |
  • | | priority vehicular streams crossing the path. |
  • | Potential Capacity (c_p) | Maximum theoretical capacity of minor movement |
  • | | assuming zero blockage from other minor queues.|
  • +-----------------------------------------------------------------------------+
  • Potential Capacity Formulation ( c p c_p c p ​ )

Under HCM gap acceptance theory assuming Poisson-distributed arrivals in the conflicting stream, the potential capacity ( c p , x c_{p,x} c p , x ​ ) in passenger cars per hour (pc/h) for subject movement x x x is computed as: c p , x = v c , x ⋅ exp ⁡ ( − v c , x ⋅ t c , x 3600 ) 1 − exp ⁡ ( − v c , x ⋅ t f , x 3600 ) c_{p,x} = v_{c,x} \cdot \frac{\exp\left(-\frac{v_{c,x} \cdot t_{c,x}}{3600}\right)}{1 - \exp\left(-\frac{v_{c,x} \cdot t_{f,x}}{3600}\right)} c p , x ​ = v c , x ​ ⋅ 1 − exp ( − 3600 v c , x ​ ⋅ t f , x ​ ​ ) exp ( − 3600 v c , x ​ ⋅ t c , x ​ ​ ) ​

Where:

v c , x v_{c,x} v c , x ​ = conflicting flow rate for movement x x x (veh/h or pc/h).

t c , x t_{c,x} t c , x ​ = critical headway for movement x x x (seconds).

t f , x t_{f,x} t f , x ​ = follow-up headway for movement x x x (seconds).

Base Critical ( t c , b a s e t_{c,base} t c , ba se ​ ) and Follow-Up ( t f , b a s e t_{f,base} t f , ba se ​ ) Headways (HCM Values)

Movement Base Critical Headway t c , b a s e t_{c,base} t c , ba se ​ (s) Base Follow-Up Headway t f , b a s e t_{f,base} t f , ba se ​ (s)

  • Major-Street Left Turn (Rank 2) 4.1 s (2-lane major) / 4.1 s (4-lane major) 2.2 s
  • Minor-Street Right Turn (Rank 2) 6.2 s (2-lane major) / 6.9 s (4-lane major) 3.3 s
  • Minor-Street Through (Rank 3) 6.5 s (2-lane major) / 7.3 s (4-lane major) 4.0 s
  • Minor-Street Left Turn (Rank 4) 7.1 s (2-lane major) / 8.1 s (4-lane major) 3.5 s
  • Critical Headway Adjustments

The base critical headway is adjusted for site-specific conditions: t c , x = t c , b a s e + t c , H V ⋅ P H V + t c , G ⋅ G − t c , T − t 3 , L T t_{c,x} = t_{c,base} + t_{c,HV} \cdot P_{HV} + t_{c,G} \cdot G - t_{c,T} - t_{3,LT} t c , x ​ = t c , ba se ​ + t c , H V ​ ⋅ P H V ​ + t c , G ​ ⋅ G − t c , T ​ − t 3 , L T ​

Where:

t c , H V t_{c,HV} t c , H V ​ = adjustment factor for heavy vehicles (typically 1.0 s 1.0\text{ s} 1.0 s for multilane, 2.0 s 2.0\text{ s} 2.0 s for 2-lane).

P H V P_{HV} P H V ​ = proportion of heavy vehicles in subject movement.

t c , G t_{c,G} t c , G ​ = adjustment factor for minor-street approach grade ( 0.1 s 0.1\text{ s} 0.1 s per 1 % 1\% 1% upgrade for minor left/through; 0.2 s 0.2\text{ s} 0.2 s per 1 % 1\% 1% upgrade for minor right).

G G G = percent grade divided by 100.

t c , T t_{c,T} t c , T ​ = adjustment factor for T-intersection geometry ( 0.7 s 0.7\text{ s} 0.7 s reduction for minor-street left turn at 3-leg intersection).

t 3 , L T t_{3,LT} t 3 , L T ​ = adjustment for two-stage gap acceptance if a wide raised median is present ( 0.7 s 0.7\text{ s} 0.7 s reduction).

Movement Hierarchy, Conflicting Streams, & Impedance

Right-of-way priority at a TWSC intersection follows a strict four-tier hierarchical ranking system. Movements with higher numerical rank must yield right-of-way to all movements of lower numerical rank. +-----------------------------------------------------------------------------+

  • | TWSC MOVEMENT HIERARCHICAL RANKS |
  • +-----------------------------------------------------------------------------+
  • | Rank 1 (Highest Priority) | Major-Street Through Movements |
  • | | Major-Street Right-Turn Movements |
  • +----------------------------+------------------------------------------------+
  • | Rank 2 | Major-Street Left-Turn Movements |
  • | | Minor-Street Right-Turn Movements |
  • +----------------------------+------------------------------------------------+
  • | Rank 3 | Minor-Street Through Movements |
  • +----------------------------+------------------------------------------------+
  • | Rank 4 (Lowest Priority) | Minor-Street Left-Turn Movements |
  • +----------------------------+------------------------------------------------+
  • Conflicting Flow Rates ( v c , x v_{c,x} v c , x ​ )

Each movement encounters a distinct set of conflicting movements:

Major Left Turn (Rank 2): Conflicts with opposing major through flow ( v T , o p p v_{T,opp} v T , o pp ​ ) plus opposing major right-turn flow ( v R , o p p v_{R,opp} v R , o pp ​ , if right turns merge into same lane).

Minor Right Turn (Rank 2): Conflicts with major through flow from the left ( v T , l e f t v_{T,left} v T , l e f t ​ ) and major right turns from the left.

Minor Through (Rank 3): Conflicts with both major through streams ( v T 1 + v T 2 v_{T1} + v_{T2} v T 1 ​ + v T 2 ​ ), major right turns from the left, major left turns from both directions, and opposing minor right turns.

Minor Left Turn (Rank 4): Conflicts with all major through, right, and left movements, plus opposing minor through and minor right movements!

Impedance & Movement Capacity ( c m , x c_{m,x} c m , x ​ )

When a higher-priority minor movement (such as a major left turn or minor through) develops a queue, it obstructs lower-priority movements (such as minor left turns), even if gaps are available in the major through stream. This is called impedance .

The unblocked probability ( p 0 , j p_{0,j} p 0 , j ​ ) for movement j j j is: p 0 , j = 1 − v j c m , j p_{0,j} = 1 - \frac{v_j}{c_{m,j}} p 0 , j ​ = 1 − c m , j ​ v j ​ ​

Where v j v_j v j ​ is the demand volume and c m , j c_{m,j} c m , j ​ is movement capacity. The movement capacity for Rank 4 (minor left turn) is calculated by multiplying potential capacity by the product of the unblocked probabilities of all higher-ranking conflicting minor movements: c m , R a n k 4 = c p , R a n k 4 ⋅ p 0 , M a j L T 1 ⋅ p 0 , M a j L T 2 ⋅ p 0 , M i n T H c_{m,Rank4} = c_{p,Rank4} \cdot p_{0,MajLT1} \cdot p_{0,MajLT2} \cdot p_{0,MinTH} c m , R ank 4 ​ = c p , R ank 4 ​ ⋅ p 0 , M aj L T 1 ​ ⋅ p 0 , M aj L T 2 ​ ⋅ p 0 , M in T H ​

Shared Lane Capacity (Harders Formulation)

When multiple minor movements (e.g., left, through, right) share a single approach lane, the shared-lane capacity ( c S H c_{SH} c S H ​ ) is governed by the harmonic mean: c S H = ∑ v i ∑ ( v i c m , i ) c_{SH} = \frac{\sum v_i}{\sum \left( \frac{v_i}{c_{m,i}} \right)} c S H ​ = ∑ ( c m , i ​ v i ​ ​ ) ∑ v i ​ ​

Where v i v_i v i ​ is the volume of movement i i i and c m , i c_{m,i} c m , i ​ is the movement capacity of movement i i i .

Loading diagram... TWSC Movement Hierarchy and Conflict Priority Flow

2. All-Way Stop-Controlled (AWSC) Intersections

At an AWSC intersection, every entering vehicle must come to a complete stop. Right-of-way is governed by arrival order (first-to-stop, first-to-go) and clockwise priority rules for simultaneous arrivals.

AWSC Departure Headway & The 5 Service Regimes

Under HCM 7th Edition, departure headway ( h d h_d h d ​ ) is modeled using an iterative 5-regime probability model that evaluates the interaction of vehicles queued on conflicting, opposing, and subject approaches: +-----------------------------------------------------------------------------+

  • | AWSC FIVE SERVICE OPERATIONAL REGIMES |
  • +-----------------------------------------------------------------------------+
  • | Regime 1 | Isolated departure: No vehicles present on opposing or cross |
  • | | approaches (minimum departure headway, highest service rate). |
  • | Regime 2 | Vehicle present on other approaches, but not queued. |
  • | Regime 3 | Vehicles queued on minor/conflicting cross approaches. |
  • | Regime 4 | Vehicles queued on opposing major approach. |
  • | Regime 5 | All four approaches simultaneously queued (full saturation / |
  • | | maximum departure headway ~ 7.0 to 9.0 s/veh). |
  • +-----------------------------------------------------------------------------+

The service time ( t s t_s t s ​ ) for an approach is calculated as: t s = h d − t m t_s = h_d - t_m t s ​ = h d ​ − t m ​

Where h d h_d h d ​ is the weighted departure headway across all 5 regimes and t m t_m t m ​ is the move-up time in the queue (typically 2.0 to 2.3 s 2.0\text{ to }2.3\text{ s} 2.0 to 2.3 s ). Approach capacity is c = 3600 / h d c = 3600 / h_d c = 3600/ h d ​ .

3. Modern Roundabouts Capacity & Operational Formulations

Modern roundabouts operate on three fundamental principles:

Yield-at-Entry (Off-side priority): Entering vehicles must yield right-of-way to circulating traffic already in the roundabout.

Geometric Deflection: Vehicle paths are deflected around a central island to constrain entry and circulating speeds to 15 – 25 mph 15\text{–}25\text{ mph} 15 – 25 mph .

Flared / Designated Entry Lanes: Multi-lane entries channel movements to appropriate circulatory lanes without weaving.

HCM 7th Edition / NCHRP Report 572 Entry Capacity Model

Roundabout entry capacity ( c e c_e c e ​ ) is an exponential function of the circulating flow rate ( v c v_c v c ​ ) conflicting with the entry lane: c e , p c e = A ⋅ exp ⁡ ( − B ⋅ v c , p c e ) c_{e,pce} = A \cdot \exp\left( -B \cdot v_{c,pce} \right) c e , p ce ​ = A ⋅ exp ( − B ⋅ v c , p ce ​ )

Where:

c e , p c e c_{e,pce} c e , p ce ​ = entry lane capacity in passenger car equivalents (pc/h).

v c , p c e v_{c,pce} v c , p ce ​ = conflicting circulating flow rate passing in front of the entry lane (pc/h).

A A A = capacity intercept (maximum entry capacity at zero circulating flow).

B B B = slope parameter (sensitivity coefficient to circulating traffic).

HCM 7th Edition Roundabout Capacity Regression Parameters

Roundabout Lane Configuration Entry Lane Intercept Parameter A A A Slope Parameter B B B Capacity Formula (pc/h)

Single-Lane Roundabout Single Entry 1,380 1.02 × 10 − 3 1.02 \times 10^{-3} 1.02 × 1 0 − 3 c e = 1380 ⋅ e − 0.00102 ⋅ v c c_e = 1380 \cdot e^{-0.00102 \cdot v_c} c e ​ = 1380 ⋅ e − 0.00102 ⋅ v c ​

Multilane Roundabout (2 circulating lanes) Right Entry Lane 1,420 0.85 × 10 − 3 0.85 \times 10^{-3} 0.85 × 1 0 − 3 c e , R = 1420 ⋅ e − 0.00085 ⋅ v c c_{e,R} = 1420 \cdot e^{-0.00085 \cdot v_c} c e , R ​ = 1420 ⋅ e − 0.00085 ⋅ v c ​

Multilane Roundabout (2 circulating lanes) Left Entry Lane 1,350 0.90 × 10 − 3 0.90 \times 10^{-3} 0.90 × 1 0 − 3 c e , L = 1350 ⋅ e − 0.00090 ⋅ v c c_{e,L} = 1350 \cdot e^{-0.00090 \cdot v_c} c e , L ​ = 1350 ⋅ e − 0.00090 ⋅ v c ​

Critical Note on Flared Entries: A flared entry or bypass lane increases entry width and local radius, effectively increasing A A A and reducing critical headway t c t_c t c ​ .

  • Control Delay & Level of Service (LOS) Criteria
  • Unsignalized Intersection Control Delay Formula

For TWSC, AWSC, and modern roundabouts, average control delay ( d d d ) in seconds per vehicle is computed from the HCM queuing equation: d = 3600 c m + 900 T [ ( x − 1 ) + ( x − 1 ) 2 + ( 3600 c m ) ⋅ x c m ⋅ T ] + 5 d = \frac{3600}{c_m} + 900 T \left[ (x - 1) + \sqrt{(x - 1)^2 + \frac{\left(\frac{3600}{c_m}\right) \cdot x}{c_m \cdot T}} \right] + 5 d = c m ​ 3600 ​ + 900 T ​ ( x − 1 ) + ( x − 1 ) 2 + c m ​ ⋅ T ( c m ​ 3600 ​ ) ⋅ x ​ ​ ​ + 5

Where:

d d d = average control delay (s/veh).

c m c_m c m ​ = movement or lane capacity (pc/h).

x x x = volume-to-capacity ratio = v / c m = v / c_m = v / c m ​ .

T T T = analysis period duration (hours; typically 0.25 h 0.25\text{ h} 0.25 h for a 15-minute peak period).

+ 5 +5 + 5 = constant acceleration/deceleration delay term ( 5.0 s/veh 5.0\text{ s/veh} 5.0 s/veh ). For roundabouts with bypass lanes or high geometry, geometric delay is evaluated separately.

Level of Service (LOS) Thresholds Comparison

Unsignalized intersections use lower delay thresholds for Level of Service than signalized intersections. Motorists perceive stop-controlled and roundabout delays as more frustrating because they must actively search for gaps rather than passively waiting for a green signal display.

Level of Service (LOS) Unsignalized Delay Thresholds (TWSC, AWSC, Roundabouts) Signalized Intersection Delay Thresholds Driver Delay Perception at Unsignalized

LOS A ≤ 10.0 s/veh \le 10.0\text{ s/veh} ≤ 10.0 s/veh ≤ 10.0 s/veh \le 10.0\text{ s/veh} ≤ 10.0 s/veh Little to no delay; immediate gap availability.

LOS B > 10.0 to 15.0 s/veh > 10.0 \text{ to } 15.0\text{ s/veh} > 10.0 to 15.0 s/veh > 10.0 to 20.0 s/veh > 10.0 \text{ to } 20.0\text{ s/veh} > 10.0 to 20.0 s/veh Short delays; ample acceptable gaps.

LOS C > 15.0 to 25.0 s/veh > 15.0 \text{ to } 25.0\text{ s/veh} > 15.0 to 25.0 s/veh > 20.0 to 35.0 s/veh > 20.0 \text{ to } 35.0\text{ s/veh} > 20.0 to 35.0 s/veh Moderate delays; drivers wait for adequate gaps.

LOS D > 25.0 to 35.0 s/veh > 25.0 \text{ to } 35.0\text{ s/veh} > 25.0 to 35.0 s/veh > 35.0 to 55.0 s/veh > 35.0 \text{ to } 55.0\text{ s/veh} > 35.0 to 55.0 s/veh Long delays; queue forms; gap acceptance becomes aggressive.

LOS E > 35.0 to 50.0 s/veh > 35.0 \text{ to } 50.0\text{ s/veh} > 35.0 to 50.0 s/veh > 55.0 to 80.0 s/veh > 55.0 \text{ to } 80.0\text{ s/veh} > 55.0 to 80.0 s/veh Very long delays; operation at or near capacity limit.

LOS F > 50.0 s/veh > 50.0\text{ s/veh} > 50.0 s/veh or v / c > 1.00 v/c > 1.00 v / c > 1.00 > 80.0 s/veh > 80.0\text{ s/veh} > 80.0 s/veh or v / c > 1.00 v/c > 1.00 v / c > 1.00 Breakdown / oversaturation; extensive queue spillback.