Study guide

10.3 Batch and CSTR Reactors

UPDA/MMUP Engineer Registration Exam — Chemical Qatar

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts and Format 1.2 Registration, Eligibility, Grades, and Renewal 1.3 Study Strategy and Exam-Day Tactics

2 Stoichiometry & Process Calculation Foundations

2.1 Units, Bases, and Process Variables 2.2 Stoichiometry, Limiting and Excess Reactants 2.3 Batch vs Continuous and Steady vs Unsteady Operation

3 Material Balances

3.1 Steady Material Balances Without Reaction 3.2 Material Balances With Chemical Reaction 3.3 Recycle, Bypass, and Purge Systems

4 Energy Balances

4.1 Energy Forms and the First Law for Processes 4.2 Heats of Reaction and Formation 4.3 Process Energy Balance Applications

5 Thermodynamics Fundamentals

5.1 Thermodynamic Laws and State Functions 5.2 Equations of State and Real Gases 5.3 Enthalpy, Entropy, and Heat Capacity

6 Phase and Chemical Equilibria

6.1 Phase Equilibria and VLE Fundamentals 6.2 Bubble Point, Dew Point, and Flash Concepts 6.3 Chemical Reaction Equilibrium

7 Fluid Mechanics

7.1 Fluid Properties, Reynolds Number, and Flow Regimes 7.2 Bernoulli Equation and Mechanical Energy Balance 7.3 Pipe Flow, Friction, and Pumps

8 Heat Transfer

8.1 Conduction, Convection, and Radiation 8.2 Heat Transfer Coefficients and Overall U 8.3 Heat Exchangers and LMTD

9 Mass Transfer and Separations

9.1 Mass Transfer and Diffusion Fundamentals 9.2 Distillation Columns and Operations 9.3 Absorption, Stripping, and Extraction

10 Chemical Reaction Engineering

10.1 Rate Laws and Reaction Order 10.2 Arrhenius Equation and Temperature Effects 10.3 Batch and CSTR Reactors 10.4 PFR Design and Reactor Selection

11 Process Instrumentation and Control

11.1 Process Instrumentation and Measurement 11.2 Feedback Control and PID 11.3 Process Dynamics, Alarms, and Interlocks

12 Process Safety, Qatar Codes and Professional Conduct

12.1 Process Safety Fundamentals and Inherent Safety 12.2 HAZOP Methodology 12.3 LOPA, Relief Systems, and Emergency Response 12.4 Fire Protection, Environment, and Qatar Plant Context 12.5 Qatar Codes, Standards, and Professional Conduct

13 Engineering Economics and Cost Analysis

13.1 Cost Structures and Break-Even Analysis 13.2 Depreciation and the Time Value of Money 13.3 Project Economics, Estimating, and Cost Control

14 Project Management Principles (PMP)

14.1 PM Framework, Process Groups, and Knowledge Areas 14.2 Scope, Schedule, and Cost Management 14.3 Risk, Quality, and Stakeholder Management

10.3 Batch and CSTR Reactors

Key Takeaways Explain This Topic AI

Constant-volume batch design integrates time versus conversion: t = N_{A0} ∫ dX /(−r_A V) or t = ∫ dC_A / r_A forms for liquids.

An ideal CSTR is perfectly mixed; exit concentration equals the uniform reactor concentration, so the rate is evaluated at exit conditions.

CSTR mole balance: V = F_{A0} X / (−r_A)|_exit — space time grows quickly when exit rate is small.

Batch suits small campaigns, multiproduct plants, and long reaction times; CSTR suits large continuous throughputs and easy control.

For positive-order kinetics, a single CSTR needs large volume to reach high conversion because it operates entirely at the low exit rate.

Last updated: August 2026

10.3 Batch and CSTR Reactors

Quick Answer: Batch (const. V): integrate time vs conversion from the rate law. CSTR: well mixed; V = F A 0 X / ( − r A ) e x i t V = F_{A0} X / (-r_A)_{\mathrm{exit}} V = F A 0 ​ X / ( − r A ​ ) exit ​ . High conversion in one CSTR needs large V because the whole vessel sits at the low exit rate. Prefer batch for flexible/small campaigns; CSTR for steady continuous flow.

Rate laws (10.1) and Arrhenius k(T) (10.2) become equipment sizes through design equations. This section covers batch and continuous stirred-tank (CSTR) reactors—the two workhorses of conceptual CRE on licensing exams and common in specialty chemicals, treating, and many liquid-phase processes.

Constant-Volume Batch Design Equation

In an ideal batch reactor , charge reactants, run for time t, then discharge. No inflow/outflow during reaction. For species A: N A = N A 0 ( 1 − X A ) N_A = N_{A0}(1-X_A) N A ​ = N A 0 ​ ( 1 − X A ​ )

The mole balance is accumulation = generation: d N A d t = r A V = − ( − r A ) V \frac{dN_A}{dt} = r_A V = -(-r_A)V d t d N A ​ ​ = r A ​ V = − ( − r A ​ ) V

With conversion: N A 0 d X A d t = ( − r A ) V ⇒ t = N A 0 ∫ 0 X A d X ( − r A ) V N_{A0}\frac{dX_A}{dt} = (-r_A)V \quad \Rightarrow \quad t = N_{A0}\int_{0}^{X_A}\frac{dX}{(-r_A)V} N A 0 ​ d t d X A ​ ​ = ( − r A ​ ) V ⇒ t = N A 0 ​ ∫ 0 X A ​ ​ ( − r A ​ ) V d X ​

Constant volume (good for most liquid-phase batches; also gas-phase if V fixed and you track concentration carefully): t = C A 0 ∫ 0 X d X ( − r A ) or equivalently t = ∫ C A 0 C A d C A r A t = C_{A0}\int_{0}^{X}\frac{dX}{(-r_A)} \quad \text{or equivalently} \quad t = \int_{C_{A0}}^{C_A}\frac{dC_A}{r_A} t = C A 0 ​ ∫ 0 X ​ ( − r A ​ ) d X ​ or equivalently t = ∫ C A 0 ​ C A ​ ​ r A ​ d C A ​ ​

with C_A = C_{A0}(1−X) when volume and density are constant.

  • Kinetics (const. V, irreversible) Integrated batch time to conversion X
  • Zero order (−r_A = k) t = (C_{A0}/k) X
  • First order (−r_A = k C_A) t = (1/k) ln[1/(1−X)]
  • Second order (−r_A = k C_A²) t = (1/(k C_{A0})) [X/(1−X)]

Exam intuition: first-order time to high conversion grows as −ln(1−X)—the last few percent take longer, but not as brutally as a CSTR. Second-order stretches even more at high X because rate collapses with C_A².

Worked batch example (first order)

Liquid batch, constant density, first-order k = 0.5 h⁻¹, target X = 0.80: t = 1 0.5 ln ⁡ 1 1 − 0.80 = 2 ln ⁡ 5 ≈ 2 × 1.609 = 3.22 h t = \frac{1}{0.5}\ln\frac{1}{1-0.80} = 2\ln 5 \approx 2\times 1.609 = 3.22\,\mathrm{h} t = 0.5 1 ​ ln 1 − 0.80 1 ​ = 2 ln 5 ≈ 2 × 1.609 = 3.22 h

For X = 0.95: t = 2 ln ⁡ ( 1 / 0.05 ) = 2 ln ⁡ 20 ≈ 6.0 h t = 2\ln(1/0.05) = 2\ln 20 \approx 6.0\,\mathrm{h} t = 2 ln ( 1/0.05 ) = 2 ln 20 ≈ 6.0 h

Roughly double the time to go from 80% to 95% conversion versus 0 → 80%—the integral nature of high conversion.

Industrial notes: batch cycle time also includes fill, heat-up, cool-down, and cleanout—exam design equations usually mean reaction time only unless the stem expands the definition. Multiproduct fine-chemical plants favor batch flexibility.

Ideal CSTR: Well-Mixed Implication

A continuous stirred-tank reactor (CSTR) has continuous feed and effluent. Ideal CSTR assumptions:

Perfect mixing—uniform composition and temperature in the vessel.

Exit stream composition = reactor interior composition.

Steady state: accumulation = 0.

Therefore the rate (−r_A) used in the design equation is evaluated at exit (and interior) conditions—often the lowest reactant concentration and thus the slowest rate in the vessel for positive-order kinetics.

Steady mole balance on A: F A 0 − F A + r A V = 0 F_{A0} - F_A + r_A V = 0 F A 0 ​ − F A ​ + r A ​ V = 0

With F_A = F_{A0}(1−X) and r_A = −(−r_A): F A 0 X = ( − r A ) e x i t V F_{A0} X = (-r_A)_{\mathrm{exit}} V F A 0 ​ X = ( − r A ​ ) exit ​ V V = F A 0 X ( − r A ) e x i t \boxed{V = \frac{F_{A0} X}{(-r_A)_{\mathrm{exit}}}} V = ( − r A ​ ) exit ​ F A 0 ​ X ​ ​

Space time τ = V/v₀ (v₀ = inlet volumetric flow) is the usual sizing companion. For constant density, C_A = C_{A0}(1−X) and τ = C_{A0} X / (−r_A exit).

  • Quantity Meaning
  • F_{A0} Molar feed rate of A
  • X Conversion achieved in that single CSTR
  • (−r_A)_{exit} Rate at exit concentration/T
  • V Reactor volume
  • τ = V/v₀ Mean residence time (const. density liquids: related directly to X via rate law)
  • Worked CSTR example (first order, const. density)

(−r_A) = k C_A = k C_{A0}(1−X). Then: τ = V v 0 = C A 0 X k C A 0 ( 1 − X ) = X k ( 1 − X ) \tau = \frac{V}{v_0} = \frac{C_{A0} X}{k C_{A0}(1-X)} = \frac{X}{k(1-X)} τ = v 0 ​ V ​ = k C A 0 ​ ( 1 − X ) C A 0 ​ X ​ = k ( 1 − X ) X ​

With k = 0.5 h⁻¹ and X = 0.80: τ = 0.80 0.5 × 0.20 = 0.80 0.10 = 8.0 h \tau = \frac{0.80}{0.5\times 0.20} = \frac{0.80}{0.10} = 8.0\,\mathrm{h} τ = 0.5 × 0.20 0.80 ​ = 0.10 0.80 ​ = 8.0 h

Compare to the batch reaction time 3.22 h for the same k and X (ignoring downtime). The single CSTR needs much more holding time because it operates entirely at C_A = 0.20 C_{A0}, where the rate is only 20% of the feed rate value.

For X = 0.95: τ = 0.95 0.5 × 0.05 = 38 h \tau = \frac{0.95}{0.5\times 0.05} = 38\,\mathrm{h} τ = 0.5 × 0.05 0.95 ​ = 38 h

Volume (or τ) explodes as X → 1 for a single CSTR with positive-order kinetics—a major exam takeaway.

  • Target X (1st order, k fixed) Batch t ∝ ln[1/(1−X)] Single CSTR τ = X/[k(1−X)]
  • 0.50 Moderate Moderate
  • 0.80 Larger Much larger than batch
  • 0.95 Larger still Extremely large vs batch/PFR
  • When Batch vs CSTR Is Preferred
  • Prefer batch when… Prefer CSTR when…
  • Small production rates / specialty chemicals Large continuous throughput
  • Many products on the same equipment Single steady product slate
  • Recipe flexibility, quality holds Tight steady control, automation
  • Solids handling, multiphase lab-to-plant mimic Easy heat management with jackets/coils at uniform T

Very slow reactions where continuous V would be huge and campaigns fit a schedule Mixing quality and uniform T are critical

CSTR advantages: simple construction, good temperature uniformity (mixing), easy to instrument, continuous product. CSTR disadvantages for kinetics: large volume for high conversion with n > 0; poor for series reactions when intermediate is desired (low intermediate concentration environment—selectivity often better in PFR/batch; intro in 10.4).

Batch advantages: high conversion without giant volume for a given rate law (time replaces volume), flexibility. Batch disadvantages: downtime between charges, labor, batch-to-batch variability, scale-up heat-transfer limits.

High Conversion in a CSTR Means Large Volume

Graphical Levenspiel view (conceptual): plot 1/(−r_A) vs X.

  • CSTR volume ∝ rectangle height = F_{A0} × [1/(−r_A) at exit X] × X
  • PFR/batch “volume·time” ∝ area under the 1/(−r_A) curve

For kinetics where (−r_A) falls as X rises (usual positive order), 1/(−r_A) rises with X. The CSTR rectangle is tall at high X, so V is large. That is why plants use PFR , batch , or CSTR-in-series instead of one huge tank when high conversion is required (Section 10.4).

Zero-order exception (recognition): if (−r_A) = k until A vanishes, rate does not fall with concentration (while the form holds), so the CSTR penalty is milder—still know the general positive-order story for exams.

UPDA Exam Checklist for Section 10.3

Batch const. V: t from integrating dX/(−r_A) (or C–t integrals).

First-order batch: t = (1/k) ln[1/(1−X)].

CSTR: V = F_{A0} X / (−r_A exit); evaluate rate at exit .

Well mixed ⇒ no concentration gradient inside the ideal tank.

Single CSTR at high X is volume-hungry for n > 0.

Match reactor type to campaign size, continuity, and conversion needs.

Section 10.4 develops the PFR integral and systematic reactor selection (PFR vs CSTR, series tanks, selectivity intro).