Study guide

13.2 Depreciation and the Time Value of Money

UPDA/MMUP Engineer Registration Exam — Chemical Qatar

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts and Format 1.2 Registration, Eligibility, Grades, and Renewal 1.3 Study Strategy and Exam-Day Tactics

2 Stoichiometry & Process Calculation Foundations

2.1 Units, Bases, and Process Variables 2.2 Stoichiometry, Limiting and Excess Reactants 2.3 Batch vs Continuous and Steady vs Unsteady Operation

3 Material Balances

3.1 Steady Material Balances Without Reaction 3.2 Material Balances With Chemical Reaction 3.3 Recycle, Bypass, and Purge Systems

4 Energy Balances

4.1 Energy Forms and the First Law for Processes 4.2 Heats of Reaction and Formation 4.3 Process Energy Balance Applications

5 Thermodynamics Fundamentals

5.1 Thermodynamic Laws and State Functions 5.2 Equations of State and Real Gases 5.3 Enthalpy, Entropy, and Heat Capacity

6 Phase and Chemical Equilibria

6.1 Phase Equilibria and VLE Fundamentals 6.2 Bubble Point, Dew Point, and Flash Concepts 6.3 Chemical Reaction Equilibrium

7 Fluid Mechanics

7.1 Fluid Properties, Reynolds Number, and Flow Regimes 7.2 Bernoulli Equation and Mechanical Energy Balance 7.3 Pipe Flow, Friction, and Pumps

8 Heat Transfer

8.1 Conduction, Convection, and Radiation 8.2 Heat Transfer Coefficients and Overall U 8.3 Heat Exchangers and LMTD

9 Mass Transfer and Separations

9.1 Mass Transfer and Diffusion Fundamentals 9.2 Distillation Columns and Operations 9.3 Absorption, Stripping, and Extraction

10 Chemical Reaction Engineering

10.1 Rate Laws and Reaction Order 10.2 Arrhenius Equation and Temperature Effects 10.3 Batch and CSTR Reactors 10.4 PFR Design and Reactor Selection

11 Process Instrumentation and Control

11.1 Process Instrumentation and Measurement 11.2 Feedback Control and PID 11.3 Process Dynamics, Alarms, and Interlocks

12 Process Safety, Qatar Codes and Professional Conduct

12.1 Process Safety Fundamentals and Inherent Safety 12.2 HAZOP Methodology 12.3 LOPA, Relief Systems, and Emergency Response 12.4 Fire Protection, Environment, and Qatar Plant Context 12.5 Qatar Codes, Standards, and Professional Conduct

13 Engineering Economics and Cost Analysis

13.1 Cost Structures and Break-Even Analysis 13.2 Depreciation and the Time Value of Money 13.3 Project Economics, Estimating, and Cost Control

14 Project Management Principles (PMP)

14.1 PM Framework, Process Groups, and Knowledge Areas 14.2 Scope, Schedule, and Cost Management 14.3 Risk, Quality, and Stakeholder Management

13.2 Depreciation and the Time Value of Money

Key Takeaways Explain This Topic AI

Depreciation is a non-cash allocation of a past capital spend; it changes cash flow only through its effect on tax, and book value is not market value

Straight line charges (P − S)/n each year, while double declining balance applies a rate of 2/n to book value and ignores salvage until book value reaches it

Sum-of-years-digits weights the depreciable amount by remaining life using a digit sum of n(n+1)/2

Present worth of a uniform series uses P = A[(1+i)ⁿ − 1]/[i(1+i)ⁿ]; adding undiscounted future cash flows is the classic error

Land and working capital are never depreciated; working capital is invested at start-up and recovered at the end of the project

Last updated: August 2026

What depreciation is, and what it is not

Depreciation is the systematic allocation of the cost of a capital asset over its useful life. Three properties decide most exam questions:

It is a non-cash charge. The money left when the compressor was bought; depreciation only spreads that historical spend across the years the asset earns.

It reduces taxable income , which is why the method chosen changes cash flow through tax even though depreciation itself moves no cash.

Book value is not market value. Book value is simply original cost minus accumulated depreciation; the resale price of a used exchanger is set by the market, not by the ledger.

Land is not depreciated. Working capital is not depreciated—it is recovered at the end of the project.

  • Symbol Meaning
  • P Initial installed cost (first cost)
  • S Salvage value at end of life
  • n Useful life in years
  • D_k Depreciation charge in year k
  • BV_k Book value at end of year k
  • The four methods you should be able to apply
  • Straight line

D = (P − S) / n — the same charge every year, and book value falls along a straight line to exactly S.

Declining balance and double declining balance

A fixed rate is applied to the current book value , so the charge shrinks each year:

D_k = R × BV_(k−1) , with R = 2/n for double declining balance

Two rules that stems love to test: the salvage value does not enter the rate calculation, but depreciation stops once book value reaches salvage—you never depreciate below S.

Sum-of-years-digits

Weight the depreciable amount by remaining life. For life n, the digit sum is n(n+1)/2, and:

  • D_k = [(n − k + 1) / (n(n+1)/2)] × (P − S)
  • Units of production

D per unit = (P − S) / total expected units , then multiply by the units actually produced. This suits a campaign plant whose life is set by throughput rather than by calendar.

Worked comparison

A compressor costs P = QAR 12,000,000 , has salvage S = QAR 2,000,000 , and a life of n = 10 years .

Straight line: D = (12,000,000 − 2,000,000) / 10 = QAR 1,000,000 per year . Book value after four years = 12,000,000 − 4,000,000 = QAR 8,000,000 .

Double declining balance at R = 2/10 = 0.20:

  • Year Opening BV D_k = 0.20 × BV Closing BV
  • 1 12,000,000 2,400,000 9,600,000
  • 2 9,600,000 1,920,000 7,680,000
  • 3 7,680,000 1,536,000 6,144,000
  • 4 6,144,000 1,228,800 4,915,200

Sum-of-years-digits , digit sum = 10 × 11 / 2 = 55, so year 1 = (10/55) × 10,000,000 = QAR 1,818,182 .

Year-one comparison: straight line 1,000,000; sum-of-years-digits 1,818,182; double declining balance 2,400,000. All three are accelerated relative to straight line except straight line itself , and straight line and sum-of-years-digits both total exactly (P − S) over the full life. The choice changes the timing of the tax shield, not the total amount depreciated.

Time value of money

Money available now is worth more than the same amount later, because it can earn a return in the meantime. Four relationships cover almost everything this exam asks.

  • Relationship Formula Use it when
  • Future worth of a present sum F = P(1 + i)ⁿ Growing one lump sum forward
  • Present worth of a future sum P = F / (1 + i)ⁿ Discounting one future amount back

Present worth of a uniform series P = A · [(1 + i)ⁿ − 1] / [i(1 + i)ⁿ] Valuing equal annual savings or payments

Capital recovery (annualised cost) A = P · i(1 + i)ⁿ / [(1 + i)ⁿ − 1] Turning a capital sum into an equivalent annual charge

Simple interest (F = P(1 + i·n)) appears only in elementary stems; unless a question says "simple," assume compound .

Worked examples

Compounding forward. QAR 1,000,000 invested at 8% for 5 years :

F = 1,000,000 × 1.08⁵ = 1,000,000 × 1.4693 = QAR 1,469,328

Discounting back. A QAR 5,000,000 payment due in 6 years at 10% :

P = 5,000,000 / 1.1⁶ = 5,000,000 / 1.7716 = QAR 2,822,371

Note how brutal discounting is: a payment six years out is worth barely more than half its face value at a 10% rate. This is why long-dated benefits rarely rescue a weak project.

Valuing an annual saving. An energy-integration project saves QAR 800,000 per year for 10 years ; the hurdle rate is 10% :

Series present-worth factor = (1.1¹⁰ − 1) / [0.1 × 1.1¹⁰] = (2.5937 − 1) / 0.25937 = 6.1446 P = 800,000 × 6.1446 = QAR 4,915,656

So the savings stream justifies spending up to about QAR 4.9 million today—not the QAR 8 million you get by adding ten years of savings undiscounted. Confusing the sum of future cash flows with their present worth is the classic error.

Annualising a capital cost. The same factor run backwards turns a QAR 4,915,656 investment into an equivalent annual charge of 4,915,656 / 6.1446 = QAR 800,000 per year , which is exactly how a capital-recovery charge is compared against an annual operating saving.

Quick sanity checks

Raising the interest rate lowers every present worth and raises every future worth.

Doubling time is roughly 72 / i(%) : at 8%, money doubles in about nine years.

Nominal versus effective: if a rate is quoted per annum but compounded monthly, the effective annual rate is (1 + i/12)¹² − 1, always slightly higher than the nominal figure.

Traps to drill

Trap Correction

Subtracting salvage before applying the declining-balance rate Declining balance applies the rate to book value; salvage only sets the floor

  • Depreciating below salvage value Stop once BV reaches S
  • Treating book value as resale value Book value is an accounting figure, not a market price
  • Adding undiscounted future cash flows Discount every flow to a common point before comparing

Using the number of payments as the exponent when compounding is not annual Match the period of i and n: monthly rate with months, annual with years

Calling depreciation a cash outflow in a cash-flow table It is non-cash; it affects cash only through tax