Study guide
7.3 Pipe Flow, Friction, and Pumps
UPDA/MMUP Engineer Registration Exam — Chemical Qatar
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts and Format 1.2 Registration, Eligibility, Grades, and Renewal 1.3 Study Strategy and Exam-Day Tactics
2 Stoichiometry & Process Calculation Foundations
2.1 Units, Bases, and Process Variables 2.2 Stoichiometry, Limiting and Excess Reactants 2.3 Batch vs Continuous and Steady vs Unsteady Operation
3 Material Balances
3.1 Steady Material Balances Without Reaction 3.2 Material Balances With Chemical Reaction 3.3 Recycle, Bypass, and Purge Systems
4 Energy Balances
4.1 Energy Forms and the First Law for Processes 4.2 Heats of Reaction and Formation 4.3 Process Energy Balance Applications
5 Thermodynamics Fundamentals
5.1 Thermodynamic Laws and State Functions 5.2 Equations of State and Real Gases 5.3 Enthalpy, Entropy, and Heat Capacity
6 Phase and Chemical Equilibria
6.1 Phase Equilibria and VLE Fundamentals 6.2 Bubble Point, Dew Point, and Flash Concepts 6.3 Chemical Reaction Equilibrium
7 Fluid Mechanics
7.1 Fluid Properties, Reynolds Number, and Flow Regimes 7.2 Bernoulli Equation and Mechanical Energy Balance 7.3 Pipe Flow, Friction, and Pumps
8 Heat Transfer
8.1 Conduction, Convection, and Radiation 8.2 Heat Transfer Coefficients and Overall U 8.3 Heat Exchangers and LMTD
9 Mass Transfer and Separations
9.1 Mass Transfer and Diffusion Fundamentals 9.2 Distillation Columns and Operations 9.3 Absorption, Stripping, and Extraction
10 Chemical Reaction Engineering
10.1 Rate Laws and Reaction Order 10.2 Arrhenius Equation and Temperature Effects 10.3 Batch and CSTR Reactors 10.4 PFR Design and Reactor Selection
11 Process Instrumentation and Control
11.1 Process Instrumentation and Measurement 11.2 Feedback Control and PID 11.3 Process Dynamics, Alarms, and Interlocks
12 Process Safety, Qatar Codes and Professional Conduct
12.1 Process Safety Fundamentals and Inherent Safety 12.2 HAZOP Methodology 12.3 LOPA, Relief Systems, and Emergency Response 12.4 Fire Protection, Environment, and Qatar Plant Context 12.5 Qatar Codes, Standards, and Professional Conduct
13 Engineering Economics and Cost Analysis
13.1 Cost Structures and Break-Even Analysis 13.2 Depreciation and the Time Value of Money 13.3 Project Economics, Estimating, and Cost Control
14 Project Management Principles (PMP)
14.1 PM Framework, Process Groups, and Knowledge Areas 14.2 Scope, Schedule, and Cost Management 14.3 Risk, Quality, and Stakeholder Management
7.3 Pipe Flow, Friction, and Pumps
Key Takeaways Explain This Topic AI
Major losses: h_f = f (L/D) v²/(2g) (Darcy–Weisbach). Friction factor f depends on Re and relative roughness ε/D (Moody chart).
Laminar Darcy friction factor f = 64/Re; turbulent f is read from Moody or estimated by correlations—do not use 64/Re in deep turbulence.
Darcy f is 4× Fanning friction factor f_F; know which definition a formula uses before substituting numbers.
Minor losses: h_m = K v²/(2g) for fittings, valves, entrances; sum K values along the path.
Pump fluid power ρQg h_p (or ṁ g h_p); shaft power = fluid power / η. NPSH compares available suction head to required head to avoid cavitation.
Last updated: August 2026
7.3 Pipe Flow, Friction, and Pumps
Quick Answer: Major loss h_f = f (L/D) (v²/(2g)) with f from Re and roughness (Moody). Minor losses h_m = K v²/(2g) . Pump fluid power = ρ Q g h_p; shaft power = fluid power / η. NPSH protects against cavitation on the suction side.
Sections 7.1–7.2 classified flow and wrote head balances. This section supplies the loss terms and pump performance ideas that appear throughout plant design and on Domain C of the UPDA/MMUP Chemical exam—cooling-water loops, transfer pumps, and simple ΔP estimates.
Major Losses: Darcy–Weisbach
The standard straight-pipe head loss is:
h_f = f (L / D) (v² / (2 g))
Pressure drop for incompressible flow in a horizontal constant-diameter pipe (no fittings):
ΔP_f = ρ g h_f = f (L/D) (ρ v² / 2)
- Symbol Meaning
- f Darcy friction factor (dimensionless)
- L Pipe length
- D Internal diameter
- v Mean velocity
- g 9.81 m/s²
Laminar circular pipe (Hagen–Poiseuille):
f = 64 / Re (Darcy definition)
Then ΔP = (32 μ L v) / D² , equivalent to the classic laminar formula. Note f falls as 1/Re in laminar flow.
Turbulent flow: f depends on Re and relative roughness ε/D, where ε is absolute roughness of the inner wall (commercial steel, drawn tubing, concrete, etc.). The Moody chart plots f vs Re for curves of constant ε/D. Fully rough turbulent flow makes f nearly independent of Re and controlled by ε/D.
- Regime How to get f
- Laminar (Re ≲ 2100) f = 64/Re
- Smooth turbulent Correlations / Moody (ε/D → 0)
- Rough turbulent Moody with ε/D; f ≈ f(ε/D) at high Re
- Transitional Avoid when possible; uncertain f
- Darcy vs Fanning (Awareness)
Two friction-factor definitions circulate in chemical engineering:
- Name Symbol (typical) Relation
- Darcy (Darcy–Weisbach) f or f_D Used in h_f = f (L/D) v²/(2g)
- Fanning f_F or f_f f_D = 4 f_F
Fanning appears in some ΔP = 2 f_F (L/D) ρ v² forms and in many heat-transfer texts. If you mix definitions, you are off by a factor of 4. On UPDA-style items, read whether the formula shows 64/Re (Darcy laminar) or 16/Re (Fanning laminar).
Minor Losses: Fittings and Valves
Each fitting is modeled as:
h_m = K (v² / (2 g))
sometimes based on the velocity in the pipe approaching the fitting. Total minor loss is Σ K_i v²/(2g) (with care if diameters change).
- Component (illustrative K order of magnitude) Typical idea
- Sharp entrance K ~ 0.5
- Well-rounded entrance K small (~0.05)
- 90° elbow (flanged/threaded vary) K often O(0.3–1)
- Globe valve (fully open) Large K
- Gate valve (fully open) Smaller K than globe
- Exit to large tank K ~ 1 (velocity head lost)
Exams rarely require memorizing a full K table; they test that fittings add head loss proportional to velocity head and that many elbows + a throttling valve can dominate a short pipe’s major loss.
Equivalent length alternative: represent fittings as extra pipe L_eq so h_f uses (L + L_eq). Same physics, different bookkeeping.
ΔP Estimation Intuition
For quick reasoning without a full Moody read:
Compute v and Re (Section 7.1).
Laminar → analytical f = 64/Re; ΔP scales with μ, L, v / D² .
Turbulent rough → f roughly 0.02–0.05 for many plant water lines (order-of-magnitude only—use chart when data given).
ΔP scales like v² (hence Q²) in fully turbulent flow → doubling flow roughly quadruples frictional ΔP.
Small diameter is expensive: D in the denominator (and v rises as 1/D² for fixed Q, so losses skyrocket).
Worked Example: Laminar Oil Line ΔP
Problem. Oil: μ = 0.40 Pa·s, ρ = 880 kg/m³, D = 0.04 m, L = 50 m, Q = 4.0×10⁻⁴ m³/s. Horizontal pipe, no fittings. Find Re, f (Darcy), h_f, and ΔP.
- Velocity: A = π(0.04)²/4 = 1.257×10⁻³ m²
- v = Q/A = 4.0×10⁻⁴ / 1.257×10⁻³ ≈ 0.318 m/s
Reynolds: Re = ρvD/μ = (880)(0.318)(0.04)/0.40 ≈ 11.2/0.40 ≈ 28 → laminar.
- Friction factor: f = 64/Re ≈ 64/28 ≈ 2.29
- Head loss: h_f = f (L/D) v²/(2g) = 2.29 × (50/0.04) × (0.318)² / (2×9.81)
- = 2.29 × 1250 × 0.101/19.62
- ≈ 2.29 × 1250 × 0.00515 ≈ 2.29 × 6.44 ≈ 14.7 m
- Pressure drop: ΔP = ρ g h_f ≈ 880 × 9.81 × 14.7 ≈ 1.27×10⁵ Pa ≈ 1.27 bar
- Result Value
- Re ≈ 28 (laminar)
- f_Darcy ≈ 2.29
- h_f ≈ 14.7 m
- ΔP ≈ 1.27 bar
Check with Hagen–Poiseuille: ΔP = 32 μ L v / D² = 32(0.40)(50)(0.318)/(0.04)² ≈ 203.5 / 0.0016 ≈ 1.27×10⁵ Pa — matches.
Worked Example: Turbulent Water ΔP (Order of Magnitude)
Water, ρ = 1000 kg/m³, μ = 0.001 Pa·s, D = 0.10 m, L = 200 m, v = 2.0 m/s. Suppose Moody gives f ≈ 0.020.
Re = (1000)(2)(0.10)/0.001 = 2.0×10⁵ (turbulent).
h_f = 0.020 × (200/0.10) × (4)/(19.62) = 0.020 × 2000 × 0.204 ≈ 8.2 m
ΔP ≈ 1000 × 9.81 × 8.2 ≈ 80 kPa .
If an engineer wrongly used f = 64/Re = 64/2e5 = 3.2×10⁻⁴, h_f would be ~0.13 m — catastrophically low . Never apply laminar f in turbulent flow.
Pumps: Power and Efficiency
Fluid (hydraulic) power delivered to the liquid:
P_fluid = ρ Q g h_p = ṁ g h_p
Shaft power (what the driver must supply, ignoring driver losses):
P_shaft = P_fluid / η
where η is the pump efficiency (0 < η < 1), often 50–80% for many centrifugal services at reasonable operating points—use the value given in the stem.
- Quantity Formula Units
- Head h_p From mechanical energy balance m
- Volumetric flow Q Process requirement m³/s
- Fluid power ρ Q g h_p W (N·m/s)
- Shaft power ρ Q g h_p / η W → kW for motors
- Worked Example: Pump Motor Size Estimate
Q = 0.05 m³/s water, h_p = 40 m, η = 0.70, ρ = 1000 kg/m³.
- P_fluid = 1000 × 0.05 × 9.81 × 40 = 19620 W ≈ 19.6 kW
- P_shaft = 19.6 / 0.70 ≈ 28.0 kW
Select a motor above 28 kW after service factors—exam items usually stop at shaft power.
System curve vs pump curve (awareness): Required h_p rises with Q² when friction dominates. Centrifugal pumps deliver head that falls as Q rises. The operating point is the intersection. Throttling a discharge valve steepens the system curve (more K) and moves the operating point.
NPSH Concept (Exam Level)
Cavitation occurs when local pressure in the pump falls to vapor pressure: liquid boils, bubbles collapse downstream, damage impellers, and destroy head/capacity.
NPSH = Net Positive Suction Head.
- Term Meaning
- NPSH_A (available) How much the suction system provides above vapor pressure, expressed as head
- NPSH_R (required) How much the pump needs (manufacturer data)
- Criterion NPSH_A > NPSH_R (with margin)
Simplified NPSH_A for a flooded suction from an open tank:
NPSH_A ≈ (P_surface − P_vapor)/(ρ g) + z_surface_to_pump_inlet − h_suction_losses
- Change Effect on NPSH_A
- Raise supply liquid level Increases NPSH_A
- Hot liquid (higher P_vapor) Decreases NPSH_A
- Long/restrictive suction line Decreases NPSH_A
- Suction lift (pump above liquid) Decreases NPSH_A — risky
- Pressurized suction vessel Can increase NPSH_A
Exam cues: “Pump is cavitating” → check suction head, temperature/vapor pressure, clogged strainer, valve nearly closed on suction, or undersized suction piping. Fix by lowering the pump, raising liquid level, cooling the fluid, shortening suction line, or selecting a pump with lower NPSH_R.
Centrifugal vs Positive-Displacement (Brief)
- Type Head–flow behavior Typical use
- Centrifugal Broad Q range; head falls with Q Water, thin hydrocarbons
- Positive displacement Nearly fixed Q per speed; high ΔP capability Metering, viscous fluids
Do not dead-head a PD pump without relief; centrifugals at shutoff still have limits (heat, seal issues) but behave differently.
UPDA Chemical Exam Workflow
Find v, Re, regime → choose laminar f = 64/Re or turbulent Moody f.
Confirm Darcy vs Fanning if a formula is supplied.
Compute h_f and h_m ; sum into mechanical energy balance.
Solve h_p , then P_fluid and P_shaft with η.
For suction problems, compare NPSH_A qualitative factors to cavitation risk.
Common Traps
Using f = 64/Re for Re = 10⁵ water flow.
Off-by-four error between Darcy and Fanning .
Reporting fluid power when the question asks for brake/shaft power (missing 1/η).
Ignoring minor losses when the sketch is all elbows and a globe valve on a short skid.
Sizing suction lines too small → low NPSH_A and chronic cavitation.
Confusing pump head (m) with pressure rise (Pa) without ρ g.
With properties, Re, Bernoulli/mechanical energy, friction, and pumps in place, Domain C fluid mechanics connects cleanly to heat transfer (Chapter 8), where Re again appears inside convection correlations.