Study guide
9.1 Mass Transfer and Diffusion Fundamentals
UPDA/MMUP Engineer Registration Exam — Chemical Qatar
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts and Format 1.2 Registration, Eligibility, Grades, and Renewal 1.3 Study Strategy and Exam-Day Tactics
2 Stoichiometry & Process Calculation Foundations
2.1 Units, Bases, and Process Variables 2.2 Stoichiometry, Limiting and Excess Reactants 2.3 Batch vs Continuous and Steady vs Unsteady Operation
3 Material Balances
3.1 Steady Material Balances Without Reaction 3.2 Material Balances With Chemical Reaction 3.3 Recycle, Bypass, and Purge Systems
4 Energy Balances
4.1 Energy Forms and the First Law for Processes 4.2 Heats of Reaction and Formation 4.3 Process Energy Balance Applications
5 Thermodynamics Fundamentals
5.1 Thermodynamic Laws and State Functions 5.2 Equations of State and Real Gases 5.3 Enthalpy, Entropy, and Heat Capacity
6 Phase and Chemical Equilibria
6.1 Phase Equilibria and VLE Fundamentals 6.2 Bubble Point, Dew Point, and Flash Concepts 6.3 Chemical Reaction Equilibrium
7 Fluid Mechanics
7.1 Fluid Properties, Reynolds Number, and Flow Regimes 7.2 Bernoulli Equation and Mechanical Energy Balance 7.3 Pipe Flow, Friction, and Pumps
8 Heat Transfer
8.1 Conduction, Convection, and Radiation 8.2 Heat Transfer Coefficients and Overall U 8.3 Heat Exchangers and LMTD
9 Mass Transfer and Separations
9.1 Mass Transfer and Diffusion Fundamentals 9.2 Distillation Columns and Operations 9.3 Absorption, Stripping, and Extraction
10 Chemical Reaction Engineering
10.1 Rate Laws and Reaction Order 10.2 Arrhenius Equation and Temperature Effects 10.3 Batch and CSTR Reactors 10.4 PFR Design and Reactor Selection
11 Process Instrumentation and Control
11.1 Process Instrumentation and Measurement 11.2 Feedback Control and PID 11.3 Process Dynamics, Alarms, and Interlocks
12 Process Safety, Qatar Codes and Professional Conduct
12.1 Process Safety Fundamentals and Inherent Safety 12.2 HAZOP Methodology 12.3 LOPA, Relief Systems, and Emergency Response 12.4 Fire Protection, Environment, and Qatar Plant Context 12.5 Qatar Codes, Standards, and Professional Conduct
13 Engineering Economics and Cost Analysis
13.1 Cost Structures and Break-Even Analysis 13.2 Depreciation and the Time Value of Money 13.3 Project Economics, Estimating, and Cost Control
14 Project Management Principles (PMP)
14.1 PM Framework, Process Groups, and Knowledge Areas 14.2 Scope, Schedule, and Cost Management 14.3 Risk, Quality, and Stakeholder Management
9.1 Mass Transfer and Diffusion Fundamentals
Key Takeaways Explain This Topic AI
Molecular diffusion is net species transport from high to low chemical potential; Fick’s law gives molar flux proportional to a concentration (or mole-fraction) gradient with diffusivity D_AB.
Convective mass transfer adds bulk flow; total flux is diffusion plus bulk convection, and engineering rates often use a mass-transfer coefficient times a driving force (Δc, Δy, or Δp).
Film theory models the interface as a stagnant film of thickness δ where diffusion controls; k ∝ D_AB/δ in the simplest form.
Two-film theory for gas–liquid contact places resistances in both phases; the overall coefficient depends on which phase resistance dominates.
Mass-transfer driving forces vanish at equilibrium—the same VLE/solubility limits from Domain B set the zero-flux ceiling for separators.
Last updated: August 2026
9.1 Mass Transfer and Diffusion Fundamentals
Quick Answer: Species move by diffusion down a gradient (Fick: J A = − c D A B ∇ y A J_A = -c D_{AB}\nabla y_A J A = − c D A B ∇ y A or similar) and by convection with the bulk flow. Engineering rates use mass-transfer coefficients and driving forces Δ y \Delta y Δ y , Δ c \Delta c Δ c , or Δ p \Delta p Δ p . Film and two-film models explain gas–liquid contact. Flux is zero at equilibrium .
Domain C (transport phenomena: fluid, heat, and mass) carries about 20% of this guide's planning allocation. Chapters 7–8 covered momentum and heat. This chapter treats mass transfer —how components move between phases and through mixtures—and the major separation operations used in Qatar’s gas processing, refining, LNG, water treatment, and petrochemical plants: distillation, absorption/stripping, and extraction.
Equilibrium (Chapter 6) tells where a system wants to go. Mass transfer tells how fast it gets there and how large equipment must be. On exam items, confuse the two and you pick equilibrium answers for rate questions (or the reverse).
Molecular Diffusion and Fick’s Law
Molecular diffusion is the random molecular motion that produces a net flux of species from regions of higher concentration (more precisely, higher chemical potential) to lower. For a binary pair A–B under isothermal, isobaric conditions, Fick’s first law in one dimension is often written: J A = − D A B d c A d z J_A = -D_{AB}\,\frac{dc_A}{dz} J A = − D A B d z d c A
or, with mole fraction and total molar concentration (c): J A = − c D A B d y A d z J_A = -c D_{AB}\,\frac{dy_A}{dz} J A = − c D A B d z d y A
where:
- J A J_A J A = molar flux of A relative to the molar-average velocity (mol/(m²·s))
- D A B D_{AB} D A B = binary diffusivity (m²/s)
- c A c_A c A = molar concentration of A; y A y_A y A = mole fraction
- (z) = distance in the direction of the gradient
The minus sign means flux is down the gradient. Diffusivity depends on temperature , pressure (gases: roughly D ∝ T 1.5 / P D \propto T^{1.5}/P D ∝ T 1.5 / P conceptually), and species pair. Liquids have much smaller D A B D_{AB} D A B than gases—liquid-side mass transfer is often slower and more film-resistant.
Medium Typical D A B D_{AB} D A B order Exam implication
Gas at ~1 atm 10 − 5 10^{-5} 1 0 − 5 m²/s Fast molecular diffusion; packing/trays still needed for area and contacting
- Liquid 10 − 9 10^{-9} 1 0 − 9 m²/s Thin films, agitation, or packing critical
- Solid (solute in polymer/metal) Often much smaller Slow; not usual UPDA focus
Stefan flow / bulk contribution: when there is net molar flow (e.g., pure vapor A evaporating into stagnant B), total flux of A is diffusion plus convection of A with the bulk molar velocity. Exam qualitative point: equimolar counterdiffusion (classic binary distillation idealization) differs from unimolecular diffusion through stagnant gas (classic gas absorption of a dilute solute into a nonvolatile solvent with inert gas B stagnant)—the logarithmic mean driving force appears in the stagnant-gas case.
Worked intuition: Fick across a film
Gas film thickness δ = 0.5 m m = 5 × 10 − 4 m \delta = 0.5\,\mathrm{mm} = 5\times 10^{-4}\,\mathrm{m} δ = 0.5 mm = 5 × 1 0 − 4 m , D A B = 1.0 × 10 − 5 m 2 / s D_{AB} = 1.0\times 10^{-5}\,\mathrm{m^2/s} D A B = 1.0 × 1 0 − 5 m 2 /s , total c = 40 m o l / m 3 c = 40\,\mathrm{mol/m^3} c = 40 mol/ m 3 , mole fractions y A , 1 = 0.20 y_{A,1} = 0.20 y A , 1 = 0.20 at the bulk and y A , i = 0.05 y_{A,i} = 0.05 y A , i = 0.05 at the interface (steady linear profile).
Diffusive flux magnitude: J A ≈ c D A B ( y A , 1 − y A , i ) δ = 40 × 10 − 5 × 0.15 5 × 10 − 4 = 0.12 m o l / ( m 2 ⋅ s ) J_A \approx c D_{AB}\frac{(y_{A,1}-y_{A,i})}{\delta} = 40\times 10^{-5}\times\frac{0.15}{5\times 10^{-4}} = 0.12\,\mathrm{mol/(m^2\cdot s)} J A ≈ c D A B δ ( y A , 1 − y A , i ) = 40 × 1 0 − 5 × 5 × 1 0 − 4 0.15 = 0.12 mol/ ( m 2 ⋅ s )
If δ \delta δ doubles, flux halves—film thickness is a direct lever in film theory.
Convective Mass Transfer and Driving Forces
In equipment, turbulence and flow thin boundary layers and renew surface. Engineers rarely integrate Fick’s law through a complex velocity field; they define a mass-transfer coefficient (k) so that: N A = k ( driving force ) N_A = k\,(\text{driving force}) N A = k ( driving force )
Common driving-force pairings:
Form Typical use Schematic rate
Concentration Liquid films, dilute systems N A = k c ( c A , i − c A , b ) N_A = k_c (c_{A,i}-c_{A,b}) N A = k c ( c A , i − c A , b )
Mole fraction (gas) Gas film N A = k y ( y A , b − y A , i ) N_A = k_y (y_{A,b}-y_{A,i}) N A = k y ( y A , b − y A , i )
Partial pressure Gas film, absorption N A = k G ( p A , b − p A , i ) N_A = k_G (p_{A,b}-p_{A,i}) N A = k G ( p A , b − p A , i )
Mole fraction (liquid) Liquid film N A = k x ( x A , i − x A , b ) N_A = k_x (x_{A,i}-x_{A,b}) N A = k x ( x A , i − x A , b )
Driving force is the difference between bulk composition and interface composition. The interface is assumed at local equilibrium with the other phase (two-film theory). If bulk and equilibrium compositions coincide, driving force is zero and net mass transfer stops—even if molecules still exchange both ways.
Analogy to heat transfer (Chapter 8):
- Heat Mass
- Fourier / conduction Fick / diffusion
- q = h Δ T q = h\Delta T q = h Δ T N A = k Δ c N_A = k\Delta c N A = k Δ c (or Δ y \Delta y Δ y )
- Overall U Overall K y K_y K y or K x K_x K x
- LMTD for exchangers Log-mean driving force for dilute/absorber towers
Dimensionless groups (for recognition, not heavy correlation work on this exam):
- Sherwood S h = k L / D A B \mathrm{Sh} = kL/D_{AB} Sh = k L / D A B — like Nusselt for mass
- Schmidt S c = ν / D A B \mathrm{Sc} = \nu/D_{AB} Sc = ν / D A B — like Prandtl
- Reynolds — flow regime, as in fluids and heat
Higher Re generally raises (k); higher Sc means momentum diffusivity exceeds mass diffusivity (typical of liquids).
Film Theory
Film theory (Whitman) idealizes the resistance to mass transfer as a thin stagnant film of thickness δ \delta δ next to the interface, with linear concentration profile and pure diffusion across the film: k c ≈ D A B δ k_c \approx \frac{D_{AB}}{\delta} k c ≈ δ D A B
Implications you can use on MCQs:
Anything that thins the film (higher velocity, better packing wetting, agitation) increases (k).
Higher diffusivity increases (k) (at fixed δ \delta δ ).
Film theory is a model , not a measured geometric film; other models (penetration, surface renewal) change the exponent on D A B D_{AB} D A B (e.g., k ∝ D k \propto \sqrt{D} k ∝ D ), but the qualitative “resistance near the interface” story remains.
- Change Expected effect on film coefficient
- Increase bulk velocity (k) up (thinner effective film)
- Switch to gas with higher D A B D_{AB} D A B (k) up
- Increase viscosity (harder to thin film) (k) often down
- Add packing / more interfacial area (a) Rate N A a N_A a N A a up even if (k) similar
Equipment rate is often written per unit volume as k c a Δ c k_c a \Delta c k c a Δ c , where (a) is interfacial area per volume. Column design balances height (enough transfer units) against diameter (capacity, flooding—linked to fluid mechanics).
Two-Film Concept for Gas–Liquid Contact
Gas absorption, stripping, and many distillation contacts involve a gas–liquid interface . Two-film theory places:
- A gas film from bulk gas to interface
- A liquid film from interface to bulk liquid
At the interface, phases are in equilibrium: e.g., p A , i = H x A , i p_{A,i} = H x_{A,i} p A , i = H x A , i (Henry) or a VLE relation y A , i = K x A , i y_{A,i} = K x_{A,i} y A , i = K x A , i .
Overall gas-side coefficient K y K_y K y (or K G K_G K G ) folds both resistances: 1 K y = 1 k y + m k x \frac{1}{K_y} = \frac{1}{k_y} + \frac{m}{k_x} K y 1 = k y 1 + k x m
(schematic form; (m) is the local slope of the equilibrium curve y ∗ = m x y^*=m x y ∗ = m x in consistent units).
Controlling resistance When Design implication
Gas-film Highly soluble gas, large liquid-side (k), flat equilibrium Improve gas turbulence, packing that renews gas
Liquid-film Sparingly soluble gas (O₂ in water, some VOC cases) Agitate liquid, create area, use longer liquid residence
Both Intermediate solubility Overall K needed; neither film ignored
Exam reading: “The solute is very soluble in the solvent” often means equilibrium favors the liquid and liquid-side resistance may be less critical than for a sparingly soluble gas—but always check what the stem actually asks (rate vs equilibrium loading).
Linking to separators
- Operation Continuous phase contact Typical driving force story
- Distillation Vapor–liquid on trays/packing Composition vs VLE; reflux refreshes liquid
- Absorption Gas up, liquid down Solute partial pressure vs equilibrium with solvent
- Stripping Liquid down, strip gas up Dissolved solute vs low partial pressure in strip gas
- Extraction Two immiscible liquids Chemical potential / partition between raffinate and extract
- Worked Conceptual: Overall Driving Force
Bulk gas: y A = 0.10 y_A = 0.10 y A = 0.10 . Equilibrium with bulk liquid would require y A ∗ = 0.02 y_A^* = 0.02 y A ∗ = 0.02 (from measured liquid x and equilibrium curve). Overall gas-phase driving force is y A − y A ∗ = 0.08 y_A - y_A^* = 0.08 y A − y A ∗ = 0.08 . If a process change raises liquid solute level so y A ∗ y_A^* y A ∗ becomes 0.09, driving force collapses to 0.01 and transfer rate drops sharply even if hydrodynamics ((k)) are unchanged— rich solvent or high loading kills rate. That is why absorption uses lean solvent and stripping regenerates solvent (Section 9.3).
UPDA Exam Checklist for Section 9.1
Diffusion direction: high → low concentration/chemical potential; Fick has a minus sign.
Rate vs equilibrium: equilibrium sets interface compositions and zero driving force; kinetics/coefficients set flux.
Film theory: k ∼ D / δ k \sim D/\delta k ∼ D / δ ; thinner film or higher D raises k.
Two-film: series resistances; overall K combines gas and liquid films with equilibrium slope m.
Driving forces: know Δ y \Delta y Δ y , Δ c \Delta c Δ c , Δ p \Delta p Δ p pairings; LMTD-like log means appear in tower design language.
Do not invent numerical D values—use orders of magnitude and proportional reasoning.
Master diffusion, coefficients, and two-film logic first. Section 9.2 applies VLE and staging to distillation ; Section 9.3 covers absorption, stripping, and extraction as rate-and-equilibrium hybrid unit operations.