Study guide

6.3 Chemical Reaction Equilibrium

UPDA/MMUP Engineer Registration Exam — Chemical Qatar

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts and Format 1.2 Registration, Eligibility, Grades, and Renewal 1.3 Study Strategy and Exam-Day Tactics

2 Stoichiometry & Process Calculation Foundations

2.1 Units, Bases, and Process Variables 2.2 Stoichiometry, Limiting and Excess Reactants 2.3 Batch vs Continuous and Steady vs Unsteady Operation

3 Material Balances

3.1 Steady Material Balances Without Reaction 3.2 Material Balances With Chemical Reaction 3.3 Recycle, Bypass, and Purge Systems

4 Energy Balances

4.1 Energy Forms and the First Law for Processes 4.2 Heats of Reaction and Formation 4.3 Process Energy Balance Applications

5 Thermodynamics Fundamentals

5.1 Thermodynamic Laws and State Functions 5.2 Equations of State and Real Gases 5.3 Enthalpy, Entropy, and Heat Capacity

6 Phase and Chemical Equilibria

6.1 Phase Equilibria and VLE Fundamentals 6.2 Bubble Point, Dew Point, and Flash Concepts 6.3 Chemical Reaction Equilibrium

7 Fluid Mechanics

7.1 Fluid Properties, Reynolds Number, and Flow Regimes 7.2 Bernoulli Equation and Mechanical Energy Balance 7.3 Pipe Flow, Friction, and Pumps

8 Heat Transfer

8.1 Conduction, Convection, and Radiation 8.2 Heat Transfer Coefficients and Overall U 8.3 Heat Exchangers and LMTD

9 Mass Transfer and Separations

9.1 Mass Transfer and Diffusion Fundamentals 9.2 Distillation Columns and Operations 9.3 Absorption, Stripping, and Extraction

10 Chemical Reaction Engineering

10.1 Rate Laws and Reaction Order 10.2 Arrhenius Equation and Temperature Effects 10.3 Batch and CSTR Reactors 10.4 PFR Design and Reactor Selection

11 Process Instrumentation and Control

11.1 Process Instrumentation and Measurement 11.2 Feedback Control and PID 11.3 Process Dynamics, Alarms, and Interlocks

12 Process Safety, Qatar Codes and Professional Conduct

12.1 Process Safety Fundamentals and Inherent Safety 12.2 HAZOP Methodology 12.3 LOPA, Relief Systems, and Emergency Response 12.4 Fire Protection, Environment, and Qatar Plant Context 12.5 Qatar Codes, Standards, and Professional Conduct

13 Engineering Economics and Cost Analysis

13.1 Cost Structures and Break-Even Analysis 13.2 Depreciation and the Time Value of Money 13.3 Project Economics, Estimating, and Cost Control

14 Project Management Principles (PMP)

14.1 PM Framework, Process Groups, and Knowledge Areas 14.2 Scope, Schedule, and Cost Management 14.3 Risk, Quality, and Stakeholder Management

6.3 Chemical Reaction Equilibrium

Key Takeaways Explain This Topic AI

The thermodynamic equilibrium constant K is fixed by standard Gibbs energy: ΔG° = −RT ln K (with K defined consistently with the standard state).

Temperature shifts K through van ’t Hoff: exothermic reactions have K decreasing as T rises; endothermic reactions have K increasing with T.

Pressure and inert dilution shift equilibrium conversion for gas-phase reactions with mole change via Le Chatelier’s principle, even when K itself is approximately P-independent for ideal gases.

Equilibrium conversion is the thermodynamic ceiling; kinetics (rate) determine how fast you approach it—catalysts speed rates without changing K.

UPDA items often combine qualitative Le Chatelier reasoning with simple K expressions in partial pressures or mole fractions.

Last updated: August 2026

6.3 Chemical Reaction Equilibrium

Quick Answer: Δ G ∘ = − R T ln ⁡ K \Delta G^{\circ} = -RT \ln K Δ G ∘ = − RT ln K fixes the equilibrium constant . T changes K (van ’t Hoff / Le Chatelier). P and inerts change equilibrium conversion for gas reactions with Δ n ≠ 0 \Delta n \neq 0 Δ n  = 0 . Equilibrium ≠ kinetics: K sets the ceiling; rate laws and catalysts set the speed.

Phase equilibrium (Sections 6.1–6.2) equates fugacities across phases. Chemical reaction equilibrium equates chemical potentials through a stoichiometric reaction, fixing the composition a closed system approaches given enough time. Domain B tests the thermo side; Domain D (Chemical Reaction Engineering) adds rate laws and reactor types—this section keeps the boundary clear.

Equilibrium Constant and ΔG°

For a general reaction ν A A + ν B B ⇌ ν C C + ν D D \nu_A A + \nu_B B \rightleftharpoons \nu_C C + \nu_D D ν A ​ A + ν B ​ B ⇌ ν C ​ C + ν D ​ D

the standard Gibbs energy change of reaction Δ G ∘ ( T ) \Delta G^{\circ}(T) Δ G ∘ ( T ) relates to the thermodynamic equilibrium constant (K): Δ G ∘ ( T ) = − R T ln ⁡ K \Delta G^{\circ}(T) = -RT \ln K Δ G ∘ ( T ) = − RT ln K

  • Δ G ∘ \Delta G^{\circ} Δ G ∘ K Equilibrium position
  • Large negative K ≫ 1 Products strongly favored
  • Zero K = 1 Comparable product/reactant activities
  • Large positive K ≪ 1 Reactants favored; low equilibrium conversion

For ideal gases with standard state 1 bar (or 1 atm in older texts), K is often expressed as K f K_f K f ​ in fugacities; at low pressure: K ≈ K p = ∏ i ( p i ) ν i = ∏ i ( y i P ) ν i = K y P Δ n K \approx K_p = \prod_i (p_i)^{\nu_i} = \prod_i (y_i P)^{\nu_i} = K_y \, P^{\Delta n} K ≈ K p ​ = i ∏ ​ ( p i ​ ) ν i ​ = i ∏ ​ ( y i ​ P ) ν i ​ = K y ​ P Δ n

where Δ n = ∑ ν p r o d u c t s − ∑ ∣ ν r e a c t a n t s ∣ \Delta n = \sum \nu_{\mathrm{products}} - \sum |\nu_{\mathrm{reactants}}| Δ n = ∑ ν products ​ − ∑ ∣ ν reactants ​ ∣ for the gas-phase stoichiometry as written (net change in moles of gas).

For the ammonia synthesis reaction written as: N 2 + 3 H 2 ⇌ 2 N H 3 , Δ n = 2 − 4 = − 2 \mathrm{N_2 + 3H_2 \rightleftharpoons 2NH_3}, \quad \Delta n = 2 - 4 = -2 N 2 ​ + 3 H 2 ​ ⇌ 2N H 3 ​ , Δ n = 2 − 4 = − 2 K p = p N H 3 2 p N 2 p H 2 3 = y N H 3 2 y N 2 y H 2 3 P − 2 K_p = \frac{p_{\mathrm{NH_3}}^2}{p_{\mathrm{N_2}} p_{\mathrm{H_2}}^3} = \frac{y_{\mathrm{NH_3}}^2}{y_{\mathrm{N_2}} y_{\mathrm{H_2}}^3} P^{-2} K p ​ = p N 2 ​ ​ p H 2 ​ 3 ​ p N H 3 ​ 2 ​ ​ = y N 2 ​ ​ y H 2 ​ 3 ​ y N H 3 ​ 2 ​ ​ P − 2

So at fixed K and T, higher total P increases equilibrium mole fraction of NH₃—classic industrial high-pressure synthesis.

Liquid-phase or heterogeneous reactions use activities (mole fractions, molalities, or pure solid activity ≈ 1). On UPDA MCQs, read whether K is K c K_c K c ​ , K p K_p K p ​ , or in mole fractions, and keep units/standard states consistent with the given K.

Effect of Temperature on K

The van ’t Hoff relation (integrated form for constant Δ H ∘ \Delta H^{\circ} Δ H ∘ ): ln ⁡ K 2 K 1 = − Δ H ∘ R ( 1 T 2 − 1 T 1 ) \ln \frac{K_2}{K_1} = -\frac{\Delta H^{\circ}}{R}\left(\frac{1}{T_2} - \frac{1}{T_1}\right) ln K 1 ​ K 2 ​ ​ = − R Δ H ∘ ​ ( T 2 ​ 1 ​ − T 1 ​ 1 ​ )

  • Reaction type Raise T Effect on K
  • Exothermic ( Δ H ∘ < 0 \Delta H^{\circ} < 0 Δ H ∘ < 0 ) → K decreases; equilibrium shifts toward reactants
  • Endothermic ( Δ H ∘ > 0 \Delta H^{\circ} > 0 Δ H ∘ > 0 ) → K increases; equilibrium shifts toward products

Le Chatelier statement: adding heat to an exothermic equilibrium favors the endothermic reverse direction.

Industrial tension: ammonia and SO₃ oxidation want low T for high K but high T for fast rates —hence catalysts and optimized temperature profiles (Domain D). Equilibrium thermo alone says “cold favors NH₃,” but a cold reactor without catalyst is useless on a plant timescale.

Effect of Pressure and Inerts on Conversion

For ideal-gas reactions, K_p is a function of T only (not of total P). Still, equilibrium conversion depends on P when Δ n ≠ 0 \Delta n \neq 0 Δ n  = 0 :

  • Gas-phase Δ n \Delta n Δ n Increase total P at fixed T, feed Equilibrium conversion of reactants
  • Δ n < 0 \Delta n < 0 Δ n < 0 (moles decrease) → Increases
  • Δ n > 0 \Delta n > 0 Δ n > 0 (moles increase) → Decreases
  • Δ n = 0 \Delta n = 0 Δ n = 0 → Little/no effect via P for ideal gases

Inert dilution at fixed total P lowers partial pressures of reactants/products. For reactions with Δ n < 0 \Delta n < 0 Δ n < 0 , inerts typically hurt equilibrium conversion (similar to lowering partial pressures). For Δ n > 0 \Delta n > 0 Δ n > 0 , dilution can help conversion. Always reason from the reaction as written and the expression for K.

Liquid systems are weakly compressible; pressure effects on K are usually negligible on exam qualitative items unless high-P specialty chemistry is mentioned.

Equilibrium vs Kinetics

  • Concept What it answers Tools
  • Equilibrium How far can the reaction go? Δ G ∘ \Delta G^{\circ} Δ G ∘ , K, Le Chatelier, VLE if multiphase
  • Kinetics How fast does it go? Rate law, (k(T)), E_a, catalyst, reactor type

Critical exam facts:

A catalyst increases forward and reverse rates but does not change Δ G ∘ \Delta G^{\circ} Δ G ∘ or K ; it shortens time to the same equilibrium composition (in a closed system).

Zero conversion can mean either K is tiny or the reaction is frozen kinetically—or the reactor is too small/cold.

Equilibrium conversion is the upper bound for a single reaction in a closed system at given T (and P, feed); real reactors may stop earlier.

Multiple reactions need simultaneous equilibria or kinetic selectivity—do not force one K to describe two independent paths without data.

Worked Example 1: From ΔG° to K

Suppose at 500 K a reaction has Δ G ∘ = − 8.314 k J / m o l = − 8314 J / m o l \Delta G^{\circ} = -8.314\,\mathrm{kJ/mol} = -8314\,\mathrm{J/mol} Δ G ∘ = − 8.314 kJ/mol = − 8314 J/mol . ln ⁡ K = − Δ G ∘ R T = − − 8314 ( 8.314 ) ( 500 ) = 8314 4157 = 2.00 \ln K = -\frac{\Delta G^{\circ}}{RT} = -\frac{-8314}{(8.314)(500)} = \frac{8314}{4157} = 2.00 ln K = − RT Δ G ∘ ​ = − ( 8.314 ) ( 500 ) − 8314 ​ = 4157 8314 ​ = 2.00 K = e 2.00 ≈ 7.4 K = e^{2.00} \approx 7.4 K = e 2.00 ≈ 7.4

Products are moderately favored. If the stem gave Δ G ∘ = + 8314 J / m o l \Delta G^{\circ} = +8314\,\mathrm{J/mol} Δ G ∘ = + 8314 J/mol at the same T, then ln ⁡ K = − 2 \ln K = -2 ln K = − 2 and K ≈ 0.135 K \approx 0.135 K ≈ 0.135 —reactants favored.

Worked Example 2: Ideal-Gas Equilibrium Conversion

Reaction: A ⇌ 2 B A \rightleftharpoons 2B A ⇌ 2 B (ideal gas), Δ n = + 1 \Delta n = +1 Δ n = + 1 . Pure A feed. Isothermal, isobaric batch (or flow with long residence time). Let X = equilibrium conversion of A.

Moles: A: (1-X), B: (2X), total: (1+X). y A = 1 − X 1 + X , y B = 2 X 1 + X y_A = \frac{1-X}{1+X}, \quad y_B = \frac{2X}{1+X} y A ​ = 1 + X 1 − X ​ , y B ​ = 1 + X 2 X ​ K p = p B 2 p A = ( y B P ) 2 y A P = y B 2 y A P = 4 X 2 ( 1 − X ) ( 1 + X ) P = 4 X 2 1 − X 2 P K_p = \frac{p_B^2}{p_A} = \frac{(y_B P)^2}{y_A P} = \frac{y_B^2}{y_A} P = \frac{4X^2}{(1-X)(1+X)} P = \frac{4X^2}{1-X^2} P K p ​ = p A ​ p B 2 ​ ​ = y A ​ P ( y B ​ P ) 2 ​ = y A ​ y B 2 ​ ​ P = ( 1 − X ) ( 1 + X ) 4 X 2 ​ P = 1 − X 2 4 X 2 ​ P

If K_p = 0.5 bar and P = 1 bar: 0.5 = 4 X 2 1 − X 2 ( 1 ) ⟹ 0.5 ( 1 − X 2 ) = 4 X 2 ⟹ 0.5 = 4.5 X 2 ⟹ X 2 = 0.5 4.5 = 0.111 0.5 = \frac{4X^2}{1-X^2}(1) \implies 0.5(1-X^2) = 4X^2 \implies 0.5 = 4.5 X^2 \implies X^2 = \frac{0.5}{4.5} = 0.111 0.5 = 1 − X 2 4 X 2 ​ ( 1 ) ⟹ 0.5 ( 1 − X 2 ) = 4 X 2 ⟹ 0.5 = 4.5 X 2 ⟹ X 2 = 4.5 0.5 ​ = 0.111 X = 0.111 ≈ 0.33 ( 33 % ) X = \sqrt{0.111} \approx 0.33\ (33\%) X = 0.111 ​ ≈ 0.33 ( 33% )

Pressure effect: same K_p at P = 4 bar: 0.5 = 4 X 2 1 − X 2 ( 4 ) ⟹ 0.5 = 16 X 2 1 − X 2 ⟹ 0.5 − 0.5 X 2 = 16 X 2 ⟹ 0.5 = 16.5 X 2 0.5 = \frac{4X^2}{1-X^2}(4) \implies 0.5 = \frac{16X^2}{1-X^2} \implies 0.5 - 0.5X^2 = 16X^2 \implies 0.5 = 16.5 X^2 0.5 = 1 − X 2 4 X 2 ​ ( 4 ) ⟹ 0.5 = 1 − X 2 16 X 2 ​ ⟹ 0.5 − 0.5 X 2 = 16 X 2 ⟹ 0.5 = 16.5 X 2 X ≈ 0.0303 ≈ 0.17 ( 17 % ) X \approx \sqrt{0.0303} \approx 0.17\ (17\%) X ≈ 0.0303 ​ ≈ 0.17 ( 17% )

Higher P lowers X because Δ n > 0 \Delta n > 0 Δ n > 0 —Le Chatelier matches the algebra.

  • P (bar) Approx. X_eq (this example)
  • 1 0.33
  • 4 0.17
  • Worked Example 3: Exothermic Shift with T

SO₂ oxidation toward SO₃ is strongly exothermic. Qualitatively:

  • High T ⇒ smaller K ⇒ lower equilibrium SO₃ fraction
  • Low T ⇒ larger K ⇒ higher equilibrium conversion
  • Industrial converters use catalysts and staged cooling to balance rate vs equilibrium

If an MCQ asks only equilibrium, pick the colder option for higher conversion of an exothermic reaction; if it asks rate or approach to equilibrium in a small reactor, high T or catalyst may dominate the practical answer— read the stem .

Common UPDA Traps

Claiming a catalyst changes K or equilibrium yield in a closed system.

Saying pressure changes K_p for ideal gases (it changes conversion when Δ n ≠ 0 \Delta n \neq 0 Δ n  = 0 , not K_p(T)).

Applying liquid Le Chatelier pressure logic as if liquids were ideal gases.

Confusing phase equilibrium K-values ((y/x)) with reaction K.

Using stoichiometric feed assumptions when the stem specifies excess air or recycle.

Forgetting that Δ G ∘ \Delta G^{\circ} Δ G ∘ (standard) sets K, while Δ G \Delta G Δ G at actual conditions is zero at equilibrium.

Domain B Wrap for Chapter 6

  • Topic Core exam skill
  • Phase rule Count F = C − P + 2
  • VLE Raoult, Henry, activity idea, critical vs triple
  • Bubble/dew/flash First bubble/drop; flash balances + K_i; α for separation
  • Reaction equilibrium K ↔ ΔG°; T, P, inerts; equilibrium vs rate

Together with Chapter 5 (thermo laws, EOS, H and S), you now have the Domain B toolkit for the ~15% thermodynamics and phase-equilibria share of UPDA/MMUP Chemical exam. Transport chapters next apply driving forces that vanish at the equilibria you just defined.