Study guide
2.3 Discontinuous Measurement: Interval Recording and MTS
RBT Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: RBT Orientation, Official Sources, and 2026 Transition
1.1 What the RBT Credential Does and Does Not Authorize 1.2 Official Source Control and 2026 TCO Transition 1.3 Eligibility, Application, Fees, and Competency Assessment 1.4 Exam Format, Domain Weights, and Question Strategy 1.5 Results, Retakes, and Historical Passing Data 1.6 Supervisor-Supported Study Map
2 Chapter 2: Measurement, Data Collection, and Graphing
2.1 Observable Definitions and Session Readiness 2.2 Continuous Measurement: Frequency, Duration, Latency, and IRT 2.3 Discontinuous Measurement: Interval Recording and MTS 2.4 Permanent Product Recording and Data Source Selection 2.5 Data Entry, Graph Updates, and Visual Display 2.6 Rate, Mean Duration, Percentage, and Summary Calculations 2.7 Trend Identification, Data Quality, and Fidelity Risks
3 Chapter 3: Behavior Assessment and Preference Assessments
3.1 Assessment Role Boundaries for RBTs 3.2 Preference Assessment Formats: MSWO, Paired, and Free Operant 3.3 Skill Assessment Participation and Strength-Deficit Observation 3.4 Functional Assessment Support: Descriptive and Functional Analysis 3.5 ABC Observation, Context, and Objective Reporting 3.6 Assessment Case Lab: From Preference to Supervisor Report
4 Chapter 4: Behavior Acquisition Core Teaching Procedures
4.1 Reinforcement Procedures: Positive, Negative, and Schedules 4.2 Conditioned Reinforcers and Token Economies 4.3 Discrete-Trial Teaching Implementation 4.4 Naturalistic Teaching and Incidental Teaching 4.5 Discrimination Training and Stimulus Control 4.6 Maintenance Versus Acquisition Decisions 4.7 Behavior Acquisition Case Lab
5 Chapter 5: Prompting, Chaining, Shaping, and Generalization
5.1 Stimulus and Response Prompts 5.2 Prompt Fading, Errorless Learning, and Time Delay 5.3 Task Analysis and Forward, Backward, and Total-Task Chaining 5.4 Shaping Successive Approximations 5.5 Generalization Across Settings, People, and Stimuli 5.6 Procedural Fidelity, Error Correction, and Supervisor Feedback 5.7 Teaching Procedure Case Lab
6 Chapter 6: Behavior Reduction and Crisis Protocols
6.1 Common Functions of Behavior and Supervised Interpretation 6.2 Antecedent Interventions: NCR, High-Probability, and Demand Fading 6.3 Differential Reinforcement: DRO, DRA, DRI, DRL, and FCT 6.4 Extinction Procedures and Secondary Effects 6.5 Punishment Procedures and Time-Out Scope Controls 6.6 Crisis and Emergency Protocol Implementation 6.7 Behavior Reduction Case Lab
7 Chapter 7: Documentation, Reporting, and Session Communication
7.1 Objective Session Notes and Observable Language 7.2 Communicating Intervention-Team Concerns to Supervisors 7.3 Seeking Clinical Direction and Following Chain of Command 7.4 Reporting Variables That Affect Progress 7.5 Legal, Regulatory, and Workplace Documentation Rules 7.6 Documentation and Reporting Case Lab
8 Chapter 8: Ethics, Scope, Confidentiality, and Professional Conduct
8.1 Core Principles: Dignity, Compassion, and Integrity 8.2 Competence and Scope of RBT Services 8.3 Ongoing Supervision and Effective Feedback Practices 8.4 Confidentiality, Privacy, and Information Handling 8.5 Public Statements, Social Media, and Credential Representation 8.6 Multiple Relationships, Gifts, and Boundary Risk 8.7 Cultural Humility, Professional Communication, and Ethics Case Lab
9 Chapter 9: Supervision, Maintenance, and Workflow Readiness
9.1 RBT Supervisor and Requirements Coordinator Structures 9.2 Monthly 5% Supervision and Face-to-Face Contacts 9.3 Client-Specific Oversight and Supervisor Listing 9.4 Supervision Documentation, Audit Readiness, and Record Retention 9.5 Recertification, Transition, Reentry, and Inactive Status 9.6 Workplace Readiness for New RBTs
10 Chapter 10: Integrated RBT Session Scenario Labs
10.1 Home Session Data and Caregiver Communication Lab 10.2 School Classroom Antecedent and Reinforcement Lab 10.3 Clinic DTT, Prompting, and Token Economy Lab 10.4 Community Generalization and Safety Lab 10.5 Behavior Reduction and Crisis Documentation Lab 10.6 Data Irregularity and Supervisor Escalation Lab 10.7 Ethics, Supervision, and Boundary Simulation
11 Chapter 11: Final Review, Exam Day, and Recertification Plan
11.1 Final 30-Day RBT Study Plan 11.2 Domain-Weighted Review and Remediation Map 11.3 Timed Practice Pacing and Question Reading 11.4 Common RBT Distractor Patterns 11.5 Pearson VUE Test-Day Readiness 11.6 Retake Remediation and Application Window Planning 11.7 First-Month RBT and Recertification Readiness Plan
2.3 Discontinuous Measurement: Interval Recording and MTS
Key Takeaways Explain This Topic AI
Discontinuous measurement samples behavior instead of recording every response.
Partial interval recording can overestimate behavior because any occurrence scores the interval.
Whole interval recording can underestimate behavior because the response must occur for the entire interval.
Momentary time sampling records whether behavior is occurring at the instant the interval ends.
Last updated: May 2026
Discontinuous Measurement: Interval Recording and MTS
Discontinuous measurement records samples of behavior during an observation period rather than every response. The 2026 RBT Test Content Outline includes partial interval recording, whole interval recording, and momentary time sampling. These procedures are useful when continuous measurement would interfere with instruction or when the target is difficult to count continuously. They are also easy to misuse. The RBT must understand what each method records and what it tends to exaggerate or miss.
In interval recording, the observation period is divided into equal intervals, such as 10 seconds, 30 seconds, or 1 minute. The RBT marks each interval according to the rule in the plan. For partial interval recording, the interval is scored if the behavior happens at any time during the interval, even for one brief moment. If the interval is 30 seconds and the client taps the table once, the RBT marks occurrence for that interval. This can be useful for behavior reduction targets when the team wants to know whether behavior appeared during portions of the session.
Because one brief response scores the same as behavior lasting the entire interval, partial interval recording may overestimate total behavior.
Whole interval recording uses a stricter rule. The RBT scores the interval only if the behavior occurs throughout the entire interval. If engagement is defined as looking at materials, manipulating task items, or writing as assigned, and the client is engaged for 27 of 30 seconds, that interval is not scored as occurrence under whole interval recording if the plan requires the full interval. Whole interval recording is often used when the team wants to increase continuous behavior, such as sustained engagement or staying in an area.
Because a brief interruption makes the interval nonoccurrence, whole interval recording may underestimate behavior.
Momentary time sampling, or MTS, records whether the behavior is occurring at a specific instant, usually when the interval ends. If the RBT uses 1-minute MTS for on-task behavior, they look at the client at the end of each minute and mark whether the client is on task at that exact moment. What happened during the rest of the minute is not scored. MTS can be practical in classrooms because the RBT can observe briefly at scheduled moments while still supporting instruction. The tradeoff is that behavior occurring between checks may be missed.
Discontinuous Measurement Comparison Table
Method Scoring rule Common use Predictable risk
Partial interval Score occurrence if behavior happens at any point in the interval. Behavior reduction targets, low to moderate duration behavior Can overestimate because brief behavior scores the full interval.
Whole interval Score occurrence only if behavior happens for the entire interval. Increasing sustained behavior such as engagement Can underestimate because any break scores nonoccurrence.
Momentary time sampling Score occurrence only if behavior is happening at the observation moment. Group or classroom sampling, staff with multiple duties Can miss behavior between observation moments.
Planned activity check Confirm behavior or condition at scheduled checks if assigned by the plan. Some routine monitoring systems Not a substitute for interval recording unless trained.
A practical example shows the difference. During a 5-minute observation divided into ten 30-second intervals, a client engages in hand mouthing for two seconds near the beginning of each interval. Partial interval recording would show occurrence in all ten intervals, or 100% of intervals. Whole interval recording would show 0% because the behavior did not last through any full interval. MTS might show 0%, 100%, or something between, depending on whether hand mouthing happened at the exact observation moments. None of these results is wrong if the method was implemented correctly.
They answer different measurement questions.
The RBT's job is to preserve the rule, not to adjust it based on intuition. If the written plan says partial interval, the RBT should not decide to mark only intervals where behavior lasted most of the time. If the plan says MTS, the RBT should not mark behavior that happened 10 seconds before the timer sounded unless the behavior is still occurring at the sample moment. Small changes like these can make graphs look better or worse without any true behavior change.
Timing discipline is essential. The RBT should know the interval length, how cues will signal interval endings, where data will be recorded, and how to handle moments when safety or instruction prevents immediate marking. Some teams use interval apps, vibrating timers, or paper grids. The RBT should follow workplace rules for device use and confidentiality. If a timer fails or the RBT misses several intervals, the data sheet should not be quietly filled in from memory. The RBT should document the interruption and tell the supervisor according to the reporting procedure.
Discontinuous data are often summarized as percentage of intervals with occurrence. This percentage is not the same as percentage of time, especially for partial and whole interval systems. Saying aggression occurred during 40% of intervals is more accurate than saying the client was aggressive 40% of the session, unless the measurement system truly supports that statement. This distinction matters in notes, caregiver communication, and supervisor updates. RBTs should use the language of the measurement system and avoid overstating what sampled data show.
Good discontinuous measurement balances practicality and honesty. It lets the RBT collect consistent data in busy sessions, but it requires respect for the limitations of sampling. When candidates understand the bias of each method, they are better prepared to choose the option that matches a scenario in training and to implement assigned procedures faithfully in practice.