Study guide
6.4 Direct and Indirect Provisionals
California RDA Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Orientation: California RDA Licensure, Pathways, Fees, Eligibility, and PSI
1.1 California RDA Exam Identity 1.2 Application, Fee, Processing, and File Control 1.3 Approved Pathways and Documentation 1.4 Required Courses and BLS Evidence 1.5 Fingerprints, Background Review, and License Issuance 1.6 PSI Authorization, Name and ID Matching, and Two-Year Deadline
2 Current RDA Exam Format: OPES Update, Passing Standard, Results, and Retakes
2.1 Current Format After the OPES Update 2.2 Three-Hour Pacing and Item Stamina 2.3 Criterion-Referenced Passing Standard 2.4 Pass/Fail Results and No Actual Score 2.5 Retake Eligibility and Rescheduling 2.6 Outline Weights and Study Priorities
3 Assessment and Diagnostic Records I: Patient History, Vitals, and Oral Assessment
3.1 Domain 1A Role and Record Flow 3.2 Medical History Review and Risk Cues 3.3 Medications, Allergies, and Sensitivities 3.4 Premedication and Medical Consult Cues 3.5 Blood Pressure, Pulse, and Vital Signs 3.6 Oral Assessment, Mouth Mirror, and Basic Structures
4 Assessment and Diagnostic Records II: Diagnostic Tests, Imaging, CBCT, and Charting
4.1 Domain 1B Diagnostic Records Overview 4.2 Caries Detection Support and Recording 4.3 Intraoral Imaging for CAD Restorations 4.4 Radiographs, CBCT, Positioning, and Safety 4.5 Patient Management During Imaging 4.6 Charting Terminology, Universal, and Palmer
5 Dental Procedures I: Treatment Preparation, Instruments, Isolation, Bases, and Matrices
5.1 Treatment Stages and Exam Positioning 5.2 Tray and Equipment Setup 5.3 Instruments and Chairside Transfer 5.4 Materials, Components, Working Time, and Readiness 5.5 Isolation, Evacuation, and Field Control 5.6 Bases, Liners, Matrices, and Wedges
6 Dental Procedures II: Restorations, Provisionals, Cements, and Nitrous Oxide Support
6.1 Restoration Workflow and Exam Positioning 6.2 Temporary Fillings and Interim Restorative Support 6.3 Etchants, Bonding Agents, and Moisture Control 6.4 Direct and Indirect Provisionals 6.5 Margins, Contacts, Occlusion, and Excess Cement 6.6 Nitrous Oxide/Oxygen Support Under Dentist Order
7 Dental Procedures III: Preventive, Aesthetic, Patient Education, and Specialty Procedures
7.1 Domain 2C-2E Preventive, Education, and Specialty Map 7.2 Coronal Polishing Workflow and Patient Safety 7.3 Pit and Fissure Sealants: Isolation, Etching, and Evaluation 7.4 Bleaching and Aesthetic Support Instructions 7.5 Patient Education: Oral Hygiene, Diet, and Home Care 7.6 Specialty Procedure Support: Endodontic, Periodontal, Orthodontic, Surgical, and Prosthetic
8 Infection Control I: Patient Safety, PPE, Aerosols, Hand Hygiene, and Emergencies
8.1 Domain 3A Patient Safety and Disease Transmission Map 8.2 Standard Precautions, Barriers, and Room Readiness 8.3 Hand Hygiene and PPE Selection 8.4 Aerosol, Spatter, HVE, Air Evacuation, and Rinses 8.5 Infectious Disease Transmission and Exposure Response 8.6 Medical Emergencies, First Aid, BLS, and CPR Recognition
9 Infection Control II: Disinfection, Sterilization, Waterlines, Sharps, and Cross-Contamination
9.1 Treatment Area Turnover and Surface Risk 9.2 Barrier Selection, Placement, and Removal 9.3 Instrument Transport, Cleaning, and Sterilization Flow 9.4 Sterilization Monitoring, Storage, and Release Decisions 9.5 Dental Waterlines, Evacuation Lines, and Flushing 9.6 Sharps, Contaminated Waste, and Cross-Contamination Scenarios
10 Laws and Regulations: Consent, HIPAA, Abuse Reporting, Records, Conduct, and Scope
10.1 Domain 4 Exam Role and Legal Judgment 10.2 Consent, Patient Autonomy, and Chairside Communication 10.3 HIPAA, Privacy, Minimum Necessary, and Office Workflow 10.4 Suspected Abuse, Neglect, Exploitation, and Reporting 10.5 Records, Documentation, Corrections, and Release 10.6 Professional Conduct, Permitted Duties, and Scope Boundaries
11 RDA Study Plan: Domain Weighting, Scenario Practice, Pacing, and Error Review
11.1 Build the Plan From the Current Outline 11.2 Four-Week Study Plan for Recent Training 11.3 Six-Week Plan for Working Candidates 11.4 Eight-Week Plan for Rebuilding Foundations 11.5 Pacing for 125 Items in Three Hours 11.6 Scenario Practice and Error Logs 11.7 Dental Board Outline Final Checklist
12 Final RDA Review: Test Day, License Issuance, Renewal, and Next Steps
12.1 PSI Test-Day Timeline and Checklist 12.2 Identification, Tutorial, and Computer Navigation 12.3 Results and Retake Workflow 12.4 License Issuance After Passing 12.5 Renewal Basics After Licensure 12.6 RDAEF, OA, and DANB Next Steps 12.7 Final 48 Hours and Post-Exam Decision Tree
6.4 Direct and Indirect Provisionals
Key Takeaways Explain This Topic AI
BPC 1752.4 lets the RDA place, adjust, and finish direct provisionals and fabricate, adjust, cement, and remove indirect provisionals including stainless steel crowns used as provisionals.
Direct provisionals are usually bis-acryl or PMMA shaped chairside from a matrix; bis-acryl is easy and esthetic, PMMA is strong but exothermic with a stronger odor.
Provisionals are cemented with a non-eugenol temporary cement so they can be removed and the resin final bond is not inhibited.
Provisionals must protect the prep, maintain margins, contacts, and occlusion, and stay retentive until the final restoration is delivered.
Last updated: June 2026
What provisionals do and the RDA's legal authority to make them
A provisional (interim) restoration covers a prepared tooth while an indirect restoration is fabricated. It protects exposed dentin and pulp, prevents the prepared tooth and antagonists from drifting, maintains the gingival contour, preserves esthetics and phonetics, and lets the patient chew. Because patients live with provisionals for days to weeks, fit and finish matter even though the restoration is not final.
California gives the RDA real authority here. BPC 1752.4 permits the RDA to place, adjust, and finish direct provisional restorations and to fabricate, adjust, cement, and remove indirect provisional restorations, including stainless steel crowns when used as a provisional restoration . Fabricating a provisional crown is therefore an allowable RDA duty, performed under dentist supervision—one of the clearest examples of the RDA doing hands-on restorative work within scope. The dentist still prepares the tooth, diagnoses, and delivers the permanent restoration.
Direct vs. indirect provisionals:
- Type How it is made Typical use
- Direct Shaped chairside in the mouth/matrix from provisional resin Single crown, short-span, same-day
Indirect Made on a model/preformed shell, then adjusted and cemented Longer spans, complex cases, lab-made temps
Preformed Polycarbonate, aluminum, or stainless steel crown adapted and relined Quick anterior temp; stainless steel as a provisional
Provisional materials and temporary cement
Two resin chemistries dominate direct provisionals:
Bis-acryl (bis-GMA) composite dispenses from an automix gun into a matrix, sets quickly, is esthetic, low odor, and easy to trim—the modern default for many offices.
PMMA (polymethyl methacrylate) is mixed powder/liquid (monomer), is strong and inexpensive, but is more exothermic (gives off heat as it sets, which can irritate the pulp—seat and remove to prevent locking, and use water cooling), shrinks more, and has a strong methacrylate odor.
Provisionals are seated with a temporary cement , almost always a non-eugenol type. Two reasons: the provisional must be removable at the next visit, and—just as with interim fillings— eugenol can inhibit the resin cement used to bond the final restoration. So the standard is non-eugenol temporary cement under a provisional that precedes a resin-cemented crown. The RDA prepares the provisional material, matrix or shell, trimming and polishing instruments, temporary cement, floss, and cleanup aids, then removes excess cement with a hand instrument as permitted.
Evaluating and finishing the provisional
A provisional is judged on the same features as a final restoration, and the RDA may finish and adjust direct provisionals under supervision:
- Feature Why it matters RDA support
- Margin Protects prep and gingiva; prevents leakage Trim/finish to the margin; report gaps or open margins
- Contact Stops food impaction and tooth drift Check floss passes without shredding; report open/tight contact
- Occlusion Prevents pain, fracture, dislodgement Mark with articulating paper, adjust high spots as directed
- Surface/polish Protects soft tissue, resists plaque Polish smooth; report roughness
- Retention Keeps it on until delivery Reline/re-cement issues reported; check seating
Direct provisionals are time-sensitive. Bis-acryl and PMMA have working and setting windows; the matrix and prep must be ready before mixing. Lubricating the prep lightly and seating/removing the provisional during the rubbery stage prevents it from locking into undercuts and prevents heat buildup. A provisional that sticks, cracks, has a void, or is short at the margin is reported and corrected.
Indirect and preformed provisionals still demand chairside judgment: a lab temp or stainless steel crown must be adapted, the occlusion checked, cement cleaned, and the patient instructed on care—avoid very sticky foods, floss but pull the floss out the side rather than snapping up, and call if it comes off, feels high, or hurts. " None of these are dismissed; the RDA reports and assists with the directed adjustment. A provisional that leaves the prep exposed, sits high, has retained cement, or is loose is unsafe to send home—evaluate before dismissal.
Stainless steel crowns and the matrix shell methods
A stainless steel crown (SSC) is a preformed metal crown used in pediatric dentistry as a durable restoration and, on adult teeth, sometimes as a provisional —and California explicitly lists fabricating, adjusting, cementing, and removing SSCs used as provisionals as an RDA duty. The crown is sized to the mesiodistal width, festooned (trimmed) and crimped at the margins to adapt to the tooth, then cemented (commonly with glass ionomer for fluoride release and a chemical bond).
For direct chairused provisionals, several matrix/shell methods exist: a putty or alginate index taken before preparation reproduces the original tooth shape into which provisional resin is injected; a clear vacuum-formed shell does the same with light-cured resin; and preformed polycarbonate or aluminum crown forms are relined. Knowing that the matrix records pre-op anatomy explains why the dentist may take an impression before any drilling—the RDA prepares and labels that index so it is ready when the provisional is fabricated.
Each method ends the same way: trim, check margin/contact/occlusion, polish, cement with non-eugenol temporary cement, remove excess cement with a hand instrument, and instruct the patient.