Study guide

8.3 Hand Hygiene and PPE Selection

California RDA Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Orientation: California RDA Licensure, Pathways, Fees, Eligibility, and PSI

1.1 California RDA Exam Identity 1.2 Application, Fee, Processing, and File Control 1.3 Approved Pathways and Documentation 1.4 Required Courses and BLS Evidence 1.5 Fingerprints, Background Review, and License Issuance 1.6 PSI Authorization, Name and ID Matching, and Two-Year Deadline

2 Current RDA Exam Format: OPES Update, Passing Standard, Results, and Retakes

2.1 Current Format After the OPES Update 2.2 Three-Hour Pacing and Item Stamina 2.3 Criterion-Referenced Passing Standard 2.4 Pass/Fail Results and No Actual Score 2.5 Retake Eligibility and Rescheduling 2.6 Outline Weights and Study Priorities

3 Assessment and Diagnostic Records I: Patient History, Vitals, and Oral Assessment

3.1 Domain 1A Role and Record Flow 3.2 Medical History Review and Risk Cues 3.3 Medications, Allergies, and Sensitivities 3.4 Premedication and Medical Consult Cues 3.5 Blood Pressure, Pulse, and Vital Signs 3.6 Oral Assessment, Mouth Mirror, and Basic Structures

4 Assessment and Diagnostic Records II: Diagnostic Tests, Imaging, CBCT, and Charting

4.1 Domain 1B Diagnostic Records Overview 4.2 Caries Detection Support and Recording 4.3 Intraoral Imaging for CAD Restorations 4.4 Radiographs, CBCT, Positioning, and Safety 4.5 Patient Management During Imaging 4.6 Charting Terminology, Universal, and Palmer

5 Dental Procedures I: Treatment Preparation, Instruments, Isolation, Bases, and Matrices

5.1 Treatment Stages and Exam Positioning 5.2 Tray and Equipment Setup 5.3 Instruments and Chairside Transfer 5.4 Materials, Components, Working Time, and Readiness 5.5 Isolation, Evacuation, and Field Control 5.6 Bases, Liners, Matrices, and Wedges

6 Dental Procedures II: Restorations, Provisionals, Cements, and Nitrous Oxide Support

6.1 Restoration Workflow and Exam Positioning 6.2 Temporary Fillings and Interim Restorative Support 6.3 Etchants, Bonding Agents, and Moisture Control 6.4 Direct and Indirect Provisionals 6.5 Margins, Contacts, Occlusion, and Excess Cement 6.6 Nitrous Oxide/Oxygen Support Under Dentist Order

7 Dental Procedures III: Preventive, Aesthetic, Patient Education, and Specialty Procedures

7.1 Domain 2C-2E Preventive, Education, and Specialty Map 7.2 Coronal Polishing Workflow and Patient Safety 7.3 Pit and Fissure Sealants: Isolation, Etching, and Evaluation 7.4 Bleaching and Aesthetic Support Instructions 7.5 Patient Education: Oral Hygiene, Diet, and Home Care 7.6 Specialty Procedure Support: Endodontic, Periodontal, Orthodontic, Surgical, and Prosthetic

8 Infection Control I: Patient Safety, PPE, Aerosols, Hand Hygiene, and Emergencies

8.1 Domain 3A Patient Safety and Disease Transmission Map 8.2 Standard Precautions, Barriers, and Room Readiness 8.3 Hand Hygiene and PPE Selection 8.4 Aerosol, Spatter, HVE, Air Evacuation, and Rinses 8.5 Infectious Disease Transmission and Exposure Response 8.6 Medical Emergencies, First Aid, BLS, and CPR Recognition

9 Infection Control II: Disinfection, Sterilization, Waterlines, Sharps, and Cross-Contamination

9.1 Treatment Area Turnover and Surface Risk 9.2 Barrier Selection, Placement, and Removal 9.3 Instrument Transport, Cleaning, and Sterilization Flow 9.4 Sterilization Monitoring, Storage, and Release Decisions 9.5 Dental Waterlines, Evacuation Lines, and Flushing 9.6 Sharps, Contaminated Waste, and Cross-Contamination Scenarios

10 Laws and Regulations: Consent, HIPAA, Abuse Reporting, Records, Conduct, and Scope

10.1 Domain 4 Exam Role and Legal Judgment 10.2 Consent, Patient Autonomy, and Chairside Communication 10.3 HIPAA, Privacy, Minimum Necessary, and Office Workflow 10.4 Suspected Abuse, Neglect, Exploitation, and Reporting 10.5 Records, Documentation, Corrections, and Release 10.6 Professional Conduct, Permitted Duties, and Scope Boundaries

11 RDA Study Plan: Domain Weighting, Scenario Practice, Pacing, and Error Review

11.1 Build the Plan From the Current Outline 11.2 Four-Week Study Plan for Recent Training 11.3 Six-Week Plan for Working Candidates 11.4 Eight-Week Plan for Rebuilding Foundations 11.5 Pacing for 125 Items in Three Hours 11.6 Scenario Practice and Error Logs 11.7 Dental Board Outline Final Checklist

12 Final RDA Review: Test Day, License Issuance, Renewal, and Next Steps

12.1 PSI Test-Day Timeline and Checklist 12.2 Identification, Tutorial, and Computer Navigation 12.3 Results and Retake Workflow 12.4 License Issuance After Passing 12.5 Renewal Basics After Licensure 12.6 RDAEF, OA, and DANB Next Steps 12.7 Final 48 Hours and Post-Exam Decision Tree

8.3 Hand Hygiene and PPE Selection

Key Takeaways Explain This Topic AI

Hand hygiene is required before gloving, after glove removal, after touching contaminated surfaces, and whenever hands may be soiled—gloves never replace hand hygiene.

Use soap and water when hands are visibly soiled with blood or debris; alcohol-based hand rub (60–95% alcohol) is acceptable when hands are not visibly soiled.

Surgical hand antisepsis (for surgical/EFDA procedures) uses an antimicrobial soap or a surgical alcohol rub with persistent activity, e.g., chlorhexidine gluconate.

PPE is donned cleanest-last: gown, then mask, then eyewear/face shield, then gloves; doffing reverses it, with hand hygiene as the final step.

Masks are changed between patients or when wet; gloves are task-specific and never used to touch clean charts, phones, or door handles.

Last updated: June 2026

Hand Hygiene: Moments and Methods

Hand hygiene is the single most important infection-control measure. Per CDC, dental healthcare personnel perform hand hygiene at these moments:

  • When hands are visibly soiled
  • After barehanded touching of contaminated instruments, surfaces, or OPIM
  • Before and after treating each patient

Before donning gloves and immediately after removing gloves (gloves leak microscopically and hands sweat under them)

After touching the face, nose, or any non-clinical surface during care

Method depends on soil:

  • Situation Method
  • Hands visibly soiled (blood, debris) Soap and water hand wash (≥15–20 sec)
  • Hands not visibly soiled, routine care Plain/antimicrobial soap or an alcohol-based hand rub (60–95% alcohol)

Surgical procedure (oral surgery, some EFDA tasks) Surgical hand antisepsis : antimicrobial soap scrub, or wash then an alcohol surgical rub with persistent activity (e.g., 0.5–1% chlorhexidine gluconate )

The classic trap: alcohol-based hand rub does not work on visibly soiled hands—organic matter inactivates it—so blood or debris always means soap and water. Keep nails short, avoid artificial nails (they harbor pathogens and tear gloves), and remove rings/wrist jewelry that trap microbes and puncture gloves.

Donning and Doffing PPE in Order

PPE is wearable protection —gloves, masks, protective eyewear, face shields, gowns/clinic jackets—worn whenever spray or spatter of blood or saliva is anticipated. Sequence matters because contamination concentrates on gloves and gown fronts.

Donning (clean → on the body, gloves last):

  • Perform hand hygiene
  • Gown/clinic jacket (long sleeves, high collar, fluid-resistant for spatter work)
  • Mask (secure over nose and chin; mold the nosepiece)
  • Protective eyewear or face shield (side shields required)
  • Gloves , pulled over the gown cuffs

Doffing (most-contaminated first, hand hygiene last):

  • Gloves (contaminated outsides; peel inside-out)
  • Hand hygiene
  • Eyewear/face shield (handle by the headband/earpieces, not the front)
  • Gown (roll away from the body, contaminated side in)
  • Mask (touch only the ties/ear loops, not the front)
  • Hand hygiene — always the final step

PPE is changed at minimum between every patient . Replace a mask when it becomes wet (a wet mask wicks fluid and stops filtering), torn, or after an aerosol-heavy procedure. A standard surgical/procedure mask suffices for routine spatter; an N95 respirator (fit-tested) is reserved for airborne precautions such as suspected/active tuberculosis . Gowns are changed when visibly soiled and before leaving the work area.

Matching PPE to Exposure and Glove Discipline

PPE selection follows anticipated exposure :

Gloves for all contact with blood, saliva, mucous membranes, OPIM, or contaminated items. Exam gloves are single-use, single-patient, single-task —never washed and reused. Utility (heavy) gloves , which are puncture-resistant and can be disinfected, are for operatory cleanup and instrument processing , not patient care.

Mask + eyewear/face shield whenever procedures generate spray or spatter to the face's mucous membranes—the eyes, nose, and mouth are portals of entry.

Gown/jacket when clothing or skin could be soiled.

Nitrile instead of latex for latex-sensitive patients or staff.

Glove discipline is a frequent test point. Treatment gloves must not touch clean charts, the phone, drawer handles, the keyboard, eyeglasses, or personal items—doing so transfers contamination (indirect transmission) and is always the "unsafe" answer in a multiple-choice item. If a clean item must be handled mid-procedure, use an overglove or a clean second person. After any glove removal—routine, torn, or contaminated— hand hygiene is performed before re-gloving. Together, correct timing, the soap-versus-rub rule, ordered donning/doffing, and strict glove discipline answer nearly every Domain 3A PPE question.

Glove Types and Mask/Respirator Distinctions

Know the glove inventory and when each applies:

Glove type Use Reuse?

  • Exam (nitrile/latex/vinyl) Routine patient care Single-use, single-patient
  • Sterile surgical Oral surgery, invasive procedures Single-use, sterile

Utility (heavy nitrile/latex) Cleanup, instrument processing, surface disinfection Yes—wash/disinfect, dedicated

Overglove (food-handler) Reaching into clean storage mid-procedure Single-use over treatment gloves

For face protection, distinguish a surgical/procedure mask —which filters spatter and is changed when wet or between patients—from a fit-tested N95 respirator , which forms a seal and is required only for airborne precautions (e.g., suspected pulmonary tuberculosis). A mask protects against droplets and spatter; only a properly fitted respirator protects against true airborne particles. Protective eyewear must have side shields , and a full face shield is added over a mask for heavy-spray procedures because a shield alone does not seal around the nose and mouth.

Finally, remember the "wet mask" rule and the "reach with a barrier" rule, because both appear repeatedly: a mask that becomes wet has lost filtration and is replaced, and contaminated gloves never open clean drawers—an overglove or clean assistant does. These two micro-decisions, plus ordered donning/doffing and hand hygiene as the final step, are the workhorse answers of Domain 3A PPE items.

A few more nail-down rules: PPE is removed before leaving the treatment area, never worn into break rooms or the front office (it carries contamination out and exposes others). Reusable protective eyewear is cleaned and disinfected between patients rather than discarded. Gowns with long sleeves and a high neckline are chosen for spatter-heavy work and are changed when visibly soiled or torn. And the employer—not the employee— provides, launders, and replaces required PPE at no cost under Cal/OSHA, mirroring the Hepatitis B vaccine rule covered later in this chapter.