Study guide

7.6 Variance Requests & Permitting Determination

NEHA REHS Registered Environmental Health Specialist Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Food Safety Inspections

1.1 FDA Food Code & Temperature Control 1.2 Food Facility Design & Sanitation 1.3 Foodborne Pathogens & Employee Hygiene

2 Chapter 2: Recreational & Institutional Inspections

2.1 Recreational Water Quality & Safety 2.2 Institutional Sanitation & Healthy Homes 2.3 Body Art & Campgrounds/Gatherings

3 Chapter 3: Solid & Hazardous Waste Inspections

3.1 Solid Waste Management 3.2 Hazardous & Medical Waste

4 Chapter 4: Potable Water Systems

4.1 Drinking Water Sources & Quality 4.2 Water Treatment & Disinfection 4.3 Water Distribution & Cross-Connection Control

5 Chapter 5: Onsite Wastewater Systems

5.1 Soil Evaluation & Percolation Testing 5.2 Septic System Design & Inspection

6 Chapter 6: Occupational Safety & Investigations

6.1 Occupational Health & Workplace Safety 6.2 Environmental Health Investigations & IAQ 6.3 Vector-Borne Diseases & Pest Control 6.4 Lead Hazard Investigations

7 Chapter 7: Epidemiology & Legal Compliance

7.1 Environmental Epidemiology & Outbreaks 7.2 Environmental Statutes & Regulations 7.3 Plan Review & HACCP System Compliance 7.4 Enforcement & Stakeholder Education 7.5 Inspection Program Management & Field Equipment 7.6 Variance Requests & Permitting Determination 7.7 Risk Abatement Verification & Follow-up

8 Chapter 8: Public Health Awareness & Emergency Response

8.1 Community Health Assessment & Environmental Surveillance 8.2 Risk Communication & Community Outreach 8.3 Emergency Preparedness Planning 8.4 Disaster Response & Incident Command

7.6 Variance Requests & Permitting Determination

Key Takeaways Explain This Topic AI

A variance is a written, legally binding authorization to deviate from a specific code requirement; it requires a documented alternative that provides an equivalent level of public health protection.

Permitting status determination verifies that a facility holds a valid, current operating permit covering its specific operations and is operating within the permit's scope before routine inspection proceeds.

Variance review evaluates the scientific, operational, and legal merits of the alternative; the regulatory authority may approve, deny, or approve with conditions, and must document the technical basis for the decision.

Operating without a valid permit, or beyond a permit's scope, is grounds for enforcement action including permit suspension, revocation, or closure.

Last updated: July 2026

7.6 Variance Requests & Permitting Determination

The Conducting Compliance Review duty accounts for 12% of the REHS/RS exam (24 scored items). Five sub-tasks drive that score: conduct plan review (8 items), review HACCP plans (6 items), evaluate variance requests (2 items), determine permitting status (3 items), and verify compliance with regulations (5 items). Plan review and HACCP are covered in section 7.3, and compliance verification in 7.4. This section addresses the two administrative sub-tasks that determine whether a facility is formally authorized to deviate from code (variance) and whether it is authorized to operate at all (permitting).

Variance Requests

A variance is a written, legally binding authorization issued by the regulatory authority allowing a facility to deviate from a specific code requirement. The FDA Food Code, NSF standards, and most state codes contain specific variance provisions that allow innovation while protecting public health.

When a Variance Is Required

The FDA Food Code explicitly requires a variance (and often a HACCP plan) before a facility may use certain processes that the code otherwise restricts:

Smoking or curing food as a method of preservation rather than for flavor enhancement.

Using food additives or adding components such as sulfites to delay pathogen growth.

Custom processing animals (e.g., dressing game animals in a retail facility).

Operating a reduced oxygen packaging (ROP) method that is not otherwise permitted.

Sprouting seeds or beans.

Preparing food by another method determined by the regulatory authority to require a variance.

Displaying or holding food under conditions not otherwise allowed (e.g., unpackaged time/temperature control for safety foods displayed for longer than the standard 4-hour limit).

Using a water supply, sewage disposal system, or waste management approach that does not comply with the code.

Variance Application Requirements

A complete variance application must include:

Statement of the proposed deviation: Identify the specific code section from which the facility seeks relief.

Justification: Explain why the deviation is necessary (economic, operational, or technical reasons).

Proposed alternative: Describe the specific alternative method, process, or equipment that will provide an equivalent level of public health protection.

Supporting data: HACCP plan, scientific studies, challenge studies, process authority letters, equipment specifications, or other evidence demonstrating equivalence.

Monitoring and verification plan: How the facility will monitor the alternative and how the regulator will verify compliance with the variance conditions.

Variance Review Standards

The regulatory authority evaluates the request against a documented standard:

Equivalence: Does the alternative provide the same level of public health protection as the code requirement it replaces? The applicant, not the regulator, bears the burden of proof.

Scientific basis: Is the supporting data from a credible source (peer-reviewed study, process authority, recognized guideline)? Anecdotal claims do not meet this standard.

Operational feasibility: Can the facility consistently implement and monitor the alternative?

Precedent consistency: Is the decision consistent with prior variances for similar requests, or is there a documented basis for differentiation?

Reversibility: Can the variance be revoked if the facility fails to comply with conditions?

Variance Decision Outcomes

Outcome Conditions

Approve Variance issued; specifies exact alternative, monitoring requirements, and review date.

Approve with conditions Variance issued subject to additional monitoring, record-keeping, or operational constraints.

Deny Variance refused; written findings explain why the alternative fails to provide equivalent protection.

Revoke Variance rescinded if the facility fails to comply with conditions; reversion to code requirement.

A variance is not a permanent waiver. It must specify a review or expiration date, typically 1 to 3 years, and is non-transferable to a new owner or location.

Documentation and Appeal

The regulatory authority must document the technical basis for the variance decision in writing and provide it to the applicant. An applicant denied a variance is entitled to due process, typically a hearing before the health officer or an administrative tribunal.

Permitting Status Determination

Permitting status determination is the verification that a facility holds a valid, current operating permit covering its specific operations before an inspection proceeds. While plan review (section 7.3) precedes construction and pre-operational inspection, permitting status determination is the ongoing verification that authorization has not lapsed, been suspended, or been exceeded in scope.

What Permitting Status Verification Includes

Validity: Confirm the permit has not expired. Most food establishment permits are annual; some permits (e.g., body art, septic installer) are biennial. Expiration triggers immediate unpermitted operation.

Scope: Confirm the permit covers the operations actually being conducted. A facility permitted as a retail bakery may not operate a full restaurant without permit modification.

Ownership / change of operator: A permit is typically non-transferable. A change in ownership or operator requires a new permit application, plan review (if applicable), and a new pre-operational inspection.

Conditions: Confirm any permit conditions (e.g., 'no raw oyster service', 'limited menu only') are being met.

Outstanding enforcement: Confirm the permit is not under suspension or revocation order.

Common Permit Types in Environmental Health

  • Permit Type Examples Typical Issuing Authority
  • Food establishment Restaurant, mobile food, temporary event booth State or local health department
  • Public pool / spa Swimming pool, wading pool, therapy pool State or local health department

Onsite wastewater system installer / septic pumper Certified installer or septage hauler State environmental health program

Body art establishment Tattoo, body piercing, permanent makeup State or local health department

Public water system Community, non-transient non-community, transient non-community State primacy agency (EPA delegated)

  • Solid waste facility Landfill, transfer station, compost facility State environmental agency
  • Hazardous waste generator LQG, SQG, VSQG EPA or state delegated program
  • Permitting and Inspection Workflow

The first step in any routine inspection is to verify permitting status:

Request the permit: Ask the person in charge to produce the posted or filed permit.

Verify validity: Check the expiration date and any current conditions.

Cross-check with operations: Confirm the facility's actual operations fall within the permit's scope.

Document the status: Note the permit number, issuance date, expiration date, and any conditions in the inspection report.

Act on discrepancies: If the permit is expired, suspended, or out of scope, follow the enforcement hierarchy in section 7.4: informal notice for first-time administrative lapses; formal notice of violation or operating permit suspension for chronic or willful non-compliance.

Interaction Between Variance and Permitting

A facility with an active variance must hold a permit that reflects the variance. The permit will typically note 'Variance approved for [specific process] on [date]; expires [date]; conditions: [list].' When the variance expires, the permit must be re-issued or amended to reflect the standard code requirement, or the variance must be renewed.

Enforcement for Permitting Violations

Operating without a permit: A strict-liability violation in most jurisdictions. Sanctions range from civil penalties to immediate closure.

Operating beyond permit scope: Treated as unpermitted operation for the activities outside scope.

Expired permit: Most codes provide a grace period (often 30 days) for renewal; after the grace period, the facility is unpermitted.

Suspended permit: Operation during a suspension period is a separate, more serious violation.

Record-Keeping

Both variance decisions and permitting determinations must be retained as public records, subject to applicable open-records laws. Records must include the application, supporting documentation, decision, technical basis, conditions, and any subsequent enforcement actions. These records support consistency in future decisions and provide the audit trail required when a decision is challenged.