Study guide

3.1 Asepsis, Infection Control & Sterilization

RMA Registered Medical Assistant Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction: RMA (AMT) Exam Overview

RMA (AMT) Certification Exam Overview RMA Eligibility Routes & Certification Process RMA Career Outlook & Salary Information

2 Chapter 1: Anatomy & Physiology

1.1 Body Systems: Structure & Function 1.2 Common Diseases & Disorders 1.3 Medical Terminology 1.4 Anatomy & Physiology Practice Questions

3 Chapter 2: Administrative Medical Assisting

2.1 Insurance, Billing & Medical Coding 2.2 HIPAA, Medical Records & Health Information 2.3 Office Management, Scheduling & Communication 2.4 Medical Law & Ethics

4 Chapter 3: Clinical Procedural Tasks

3.1 Asepsis, Infection Control & Sterilization 3.2 OSHA Safety Standards & Bloodborne Pathogens 3.3 Surgical Instruments & Minor Surgery Assisting 3.4 Laboratory Procedures & CLIA Regulations

5 Chapter 4: Clinical Patient Interaction

4.1 Vital Signs & Patient Assessment 4.2 Pharmacology & Medication Administration 4.3 ECG & Specimen Collection 4.4 Patient Education, First Aid & Emergency Procedures 4.5 Clinical Patient Interaction Practice Questions

6 Chapter 5: Exam Strategy & Practice

5.1 Test-Taking Strategies for the RMA Exam 5.2 RMA vs. CMA: Choosing the Right Certification 5.3 Comprehensive Practice Questions

3.1 Asepsis, Infection Control & Sterilization

Key Takeaways Explain This Topic AI

Medical asepsis (clean technique) reduces the NUMBER of microorganisms; surgical asepsis (sterile technique) eliminates ALL microorganisms

The chain of infection includes 6 links: infectious agent, reservoir, portal of exit, mode of transmission, portal of entry, and susceptible host

Standard Precautions apply to ALL patients regardless of diagnosis and include hand hygiene, PPE, safe injection practices, and respiratory hygiene

Transmission-Based Precautions include Contact, Droplet, and Airborne precautions used in addition to Standard Precautions

Hand hygiene is the single most effective way to prevent the spread of infection in healthcare settings

Sterilization methods include autoclave (steam under pressure; CDC's minimum for wrapped instruments is 30 minutes at 121C/250F in a gravity-displacement autoclave), chemical sterilization, and gas sterilization

Biological indicators (spore tests) verify that sterilization equipment is functioning properly and should be run weekly at minimum

The correct order for donning PPE is: gown, mask/respirator, eye protection, gloves; removal is in reverse order

  • Sharps must be disposed of in puncture-resistant, leak-proof, red biohazard containers at the point of use
  • Last updated: October 2026

Infection control is the first task area in AMT's Clinical Medical Assisting work area, which accounts for 55% of the RMA exam (115 questions). It is one of the most critical topics for a medical assistant.

Types of Asepsis

Type Definition Examples

Medical asepsis (clean technique) Reduces the NUMBER of microorganisms and prevents their spread Hand washing, surface disinfection, wearing gloves for non-sterile procedures

Surgical asepsis (sterile technique) Eliminates ALL microorganisms from an area Autoclave sterilization, sterile field setup, surgical hand scrub

Chain of Infection

The chain of infection describes the six elements required for infection to spread. Breaking any single link prevents transmission:

  • Infectious agent : The pathogen (bacteria, virus, fungus, parasite)
  • Reservoir : Where the pathogen lives and multiplies (humans, animals, fomites, water, food)

Portal of exit : How the pathogen leaves the reservoir (respiratory secretions, blood, skin, GI tract, GU tract)

  • Mode of transmission : How the pathogen travels to the new host
  • Direct contact : Touching, kissing, sexual contact
  • Indirect contact : Fomites (contaminated objects), vectors (insects), vehicles (food, water, air)
  • Droplet : Large respiratory droplets (< 3 feet, coughing, sneezing)
  • Airborne : Small particles suspended in air (> 3 feet, remain airborne for extended periods)

Portal of entry : How the pathogen enters the new host (respiratory tract, breaks in skin, mucous membranes, bloodstream)

  • Susceptible host : A person with insufficient immunity to resist infection
  • Standard Precautions (Apply to ALL Patients)

Standard Precautions are used for every patient encounter regardless of known or suspected infection status:

  • Hand hygiene : Before and after every patient contact, after removing gloves
  • Gloves : When touching blood, body fluids, mucous membranes, non-intact skin
  • Masks, eye protection, face shields : When splashing or spraying of body fluids is anticipated
  • Gowns : When contact with blood or body fluids may soil clothing
  • Safe injection practices : Use single-use, single-patient vials; never reuse needles or syringes
  • Respiratory hygiene/cough etiquette : Cover coughs/sneezes, offer masks to symptomatic patients
  • Sharps safety : Use safety-engineered devices; dispose in sharps containers immediately after use
  • Transmission-Based Precautions

Type When Used PPE Required Examples

Contact Diseases spread by direct/indirect contact Gown + gloves (upon room entry) MRSA, C. difficile, scabies, VRE

Droplet Diseases spread by large respiratory droplets Surgical mask (within 3-6 feet) Influenza, pertussis, mumps, meningitis

Airborne Diseases spread by small airborne particles N95 respirator + negative pressure room TB, measles, varicella (chickenpox), COVID-19

Hand Hygiene

Hand hygiene is the single most important measure to prevent healthcare-associated infections.

When to Perform Hand Hygiene (WHO "5 Moments"):

  • Before touching a patient
  • Before a clean/aseptic procedure
  • After body fluid exposure risk
  • After touching a patient
  • After touching patient surroundings
  • Hand Washing with Soap and Water
  • Required when hands are visibly soiled or contaminated with blood/body fluids
  • Required after caring for patients with C. difficile or Norovirus (spore-forming organisms)
  • Use warm water, apply soap, lather for at least 20 seconds , rinse, and dry with paper towels
  • Use paper towel to turn off faucet
  • Alcohol-Based Hand Rub (ABHR)
  • Preferred for routine hand hygiene when hands are NOT visibly soiled
  • Apply enough product to cover all surfaces of hands and fingers
  • Rub until dry (approximately 20 seconds)
  • NOT effective against spore-forming organisms (C. difficile) -- use soap and water
  • Personal Protective Equipment (PPE)

Donning Order (Putting ON):

  • Gown (tie at neck and waist)
  • Mask or N95 respirator (fit snugly over nose and mouth)
  • Eye protection (goggles or face shield)
  • Gloves (extend over gown cuffs)

Doffing Order (Taking OFF):

  • Gloves (peel off without touching exterior; discard)
  • Eye protection (remove by headband, not lens)
  • Gown (unfasten, pull away from body, fold contaminated side in)
  • Mask/respirator (remove by elastic bands, not front)
  • Perform hand hygiene immediately
  • Sterilization Methods

Method Conditions Use

Steam autoclave 121°C (250°F), 15-20 psi; at least 30 minutes for wrapped instruments in a gravity-displacement autoclave (CDC) Most common; instruments, wrapped packs

Flash autoclave 132°C (270°F), higher pressure, 3-10 minutes Unwrapped instruments needed urgently

Chemical sterilization (cold) Glutaraldehyde or similar solution, 8-10 hours Heat-sensitive items (scopes, plastic)

  • Gas sterilization Ethylene oxide (EtO) Heat/moisture-sensitive items; requires aeration time
  • Dry heat 160-170°C, 1-2 hours Oils, powders, items damaged by moisture
  • Sterilization Quality Assurance
  • Indicator Type What It Checks Frequency
  • Process indicator (tape) External: confirms item went through process (color change) Every load
  • Chemical indicator (strip) Internal: verifies temperature, time, and steam reached item Every pack

Biological indicator (spore test) Confirms sterilization actually killed organisms At least weekly; also after repairs

  • Autoclave Loading Guidelines
  • Leave space between packs for steam penetration
  • Place items on their sides with lids open (jars, containers)
  • Do not overload the autoclave
  • Use autoclave tape on the outside of each pack
  • Include a chemical indicator strip inside each pack
  • Allow items to dry completely before removal and storage
  • Label sterilized items with date, initials, and contents

Shelf life depends on the wrapper and storage conditions: with event-related storage, a pack stays usable until it is torn, wet, punctured, or its seal is broken; with time-related storage, label each pack with an expiration date and reprocess it once that date passes (CDC)

Loading diagram... Chain of Infection