Study guide

13.4 Home Testing Instruction & Patient Education

NBRC Registered Pulmonary Function Technologist RPFT

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Content Outline Domains & Study Plan

2 Spirometry Instrumentation

2.1 Spirometer Types, Setup & Maintenance 2.2 Spirometer Calibration & Linearity 2.3 Spirometer Troubleshooting

3 Blood Gas & Gas Analyzers

3.1 Blood Gas Analyzer Setup, Maintain, Calibrate 3.2 Gas Analyzers & Water/Gas Absorbers 3.3 ABG & Gas Analyzer Troubleshooting and QC

4 Body Box, Exercise & Monitoring Equipment

4.1 Body Plethysmograph Setup & Calibration 4.2 Exercise, Field Walking & ECG Equipment 4.3 Pressure Devices, Valves & Gas Delivery Systems

5 Ancillary Equipment & Infection Control

5.1 Body Habitus, Sampling & Aerosol Equipment 5.2 Monitors & Emergency Management Equipment 5.3 Infection Control Materials & Methods

6 Quality Control Systems

6.1 Mechanical QC Devices 6.2 Biological Controls & Proficiency Testing 6.3 Laboratory Quality Management & SOPs

7 Patient Preparation & Safety

7.1 Body Habitus Measurements & Estimates 7.2 Patient Safety, Precautions & Adverse Events

8 Spirometry Procedures

8.1 Selecting Spirometry Protocols & Equipment 8.2 Performing Standard & Position-Variant Spirometry 8.3 Evaluating Spirometry Acceptability & Repeatability 8.4 Bronchodilator Response Studies

9 Static Lung Volumes

9.1 Gas Dilution Lung Volume Methods 9.2 Body Plethysmography Lung Volumes 9.3 Evaluating Lung Volume Validity

10 Diffusing Capacity (DLCO)

10.1 DLCO Protocol & Equipment Selection 10.2 Performing the DLCO Maneuver 10.3 Evaluating DLCO Validity

11 Blood Gas Sampling & Analysis Procedures

11.1 Arterial & Capillary Blood Sample Collection 11.2 Performing Blood Gas Analysis 11.3 CO-oximetry / Hemoximetry Procedures

12 Airway Responsiveness, Resistance & Muscle Strength

12.1 Bronchial Provocation Studies 12.2 Airways Resistance & Conductance by Plethysmography 12.3 Respiratory Muscle Strength (MIP/MEP/CPF)

13 Exercise, Oxygen, Home Testing & Education

13.1 Field Walking Tests (6MWT, Shuttle) 13.2 Monitored Exercise Testing 13.3 Oxygen Assessment & Titration 13.4 Home Testing Instruction & Patient Education

14 Calculations & Reference Ranges

14.1 Spirometry Calculations & Reference Equations 14.2 Lung Volume & DLCO Calculations/Corrections 14.3 Blood Gas & CO-oximetry Derived Calculations 14.4 Exercise, Oximetry & Special Test Calculations

15 Evaluating Result Reliability

15.1 Spirometry & Lung Volume Reliability 15.2 DLCO & Exercise Test Reliability 15.3 ABG, Monitoring & QC Reliability

16 Clinical Implications & Reporting

16.1 Pattern Recognition: Obstruction, Restriction, Mixed, Severity 16.2 Clinical Implications: DLCO, ABG, Airway Response, Exercise & Lab Context

13.4 Home Testing Instruction & Patient Education

Key Takeaways Explain This Topic AI

Home spirometry and home pulse oximetry require teach-back technique, written instructions, and clear quality rules—poor effort and motion artifact are the main failure modes.

Patient education for inhaled drugs covers MDI (shake, actuate–inhale coordination or spacer use), DPI (forceful inhalation, no spacer, humidity sensitivity), and nebulizer assembly/breathing pattern at a technologist level.

Travel-with-oxygen and asthma action concepts are taught as safety/education tasks: know device constraints, when to seek care, and not to freestyle medical orders.

Sputum collection instruction emphasizes clean technique, first-morning deep specimen when ordered, and avoiding saliva-only samples.

DCO II.3 (inhaled medication delivery), II.5 (sputum sample collection), II.10 (instruction for home testing), and II.11 (patient education) each carry select/perform/evaluate-validity tasks across II.A, II.B, and II.C.

Last updated: August 2026

Education and Home Testing on the RPFT Blueprint

Not every Domain II item is a body-box maneuver. The NBRC PFT DCO includes competencies to select and carry out patient instruction / education and related procedures, including clusters commonly referenced as:

  • DCO focus (select) Content
  • II.A.3 Inhaled medication delivery (MDI, DPI, nebulizers) — lab performance and teaching
  • II.A.5 Sputum sample collection (including coaching an expectorated specimen)
  • II.A.10 Instruction for home testing (e.g., home spirometry, home pulse oximetry)
  • II.A.11 Patient education (medication delivery, travel, asthma)

Corresponding II.B (perform) and II.C (evaluate validity / adequacy of the instruction outcome or home data) items ask whether the patient can actually demonstrate the skill and whether returned home values are believable.

Exact lettering should be confirmed against the current official DCO PDF; the skills —teach, return-demonstrate, catch bad home data—are what high-cut items test.

Instructing Home Spirometry

Home spirometers (hand-held turbines, ultrasonic devices, app-linked sensors) are increasingly used for transplant follow-up, clinical trials, and chronic disease programs. Your job is not to market a brand—it is to make the maneuver quality resemble lab standards as closely as the device allows.

Teaching points

Device setup: charged/battery OK, mouthpiece attached, Bluetooth/app paired if required, correct patient profile selected.

Posture: sit upright (or stand if program specifies), feet supported, no slouching.

Nose clip if the home program requires it (many do for FVC quality).

Maneuver: full inspiration to TLC, blast out hard and fast, continue to empty until the device signals end-of-test—same coaching concepts as lab spirometry (Chapter 8).

Number of efforts: complete the app/program’s required acceptable efforts; do not stop after one weak blow.

Timing: same time of day when possible; note bronchodilator timing relative to the program’s rules.

Hygiene: single-patient mouthpieces/filters per manufacturer; do not share devices across households without infection-control guidance.

Quality pitfalls (home data validity)

  • Pitfall Result
  • Slow start / cough Low FEV1, unacceptable curves
  • Early termination Underestimated FVC
  • Leak at mouthpiece Volume loss
  • Extra breaths into device Weird extra volume
  • Wrong patient profile / height not updated Mis-predicted percents if the app shows % predicted
  • Testing during acute illness without noting it False “decline” alerts
  • Poor seal after facial weakness or dentures Chronic under-reads

Teach-back: the patient performs while you watch (in person or video visit). If they cannot produce a reasonable effort after coaching, escalate to the clinical program rather than blessing unusable home monitoring.

Instructing Home Pulse Oximetry

Home oximeters are simple—and simply misused.

Instruction checklist

Apply to a warm finger; remove dark nail polish if it interferes with the specific device.

Rest the hand; avoid walking around while taking a “resting” reading unless the program wants ambulatory logs.

Wait for a stable display; record SpO2 and pulse rate.

Know the program’s alert thresholds (when to call the clinic vs emergency care)—these are clinician-set, not technologist invention.

Understand limitations: motion, poor perfusion, carbon monoxide, and methemoglobin can fool consumer oximeters.

Quality pitfalls

  • Problem Teaching fix
  • Reading while hand is swinging Rest hand on chest or table
  • Trusting a single blink of 80% with no pulse shown Require stable reading with displayed pulse
  • Comparing different unvalidated brands week to week Use the program-issued device when provided
  • Taking readings on the same finger as a BP cuff inflated Use other hand; wait after cuff deflation

Home oximetry logs that show SpO2 70% while the patient is texting cheerfully with a matching HR of 40 may be artifact —teach patients (and yourself) to question impossible combinations.

Patient Education: Inhaled Medication Delivery (II.A.3 / II.B.3, with II.11 patient education)

PFT labs give bronchodilators for response testing and often reinforce device technique because bad technique masquerades as nonresponse .

MDI (metered-dose inhaler)

  • Step Coaching point
  • Shake (if suspension MDI per label) Mix propellant/drug
  • Exhale gently away from inhaler Empty partially before dose
  • Seal lips or use spacer/VHC Spacers reduce oropharyngeal loss and ease coordination
  • Actuate once at start of slow deep inhalation Coordination is the classic failure
  • Hold breath ~5–10 seconds if able Improve deposition
  • Wait between puffs per label Often ~30–60 seconds; follow product instructions
  • Rinse mouth after inhaled steroids Thrush risk reduction

Exam traps: firing MDI into the mouth without inhaling; multiple actuations stacked before one breath; failing to shake when required; using an empty canister.

DPI (dry-powder inhaler)

Step Coaching point

Load dose per device design Click, blister, etc.

  • Do not shake like an MDI (device-specific) Can dump powder
  • Exhale away from device Moisture ruins powder
  • Forceful, deep inhalation Powder needs high inspiratory flow
  • No spacer Spacers are for MDIs/soft mist, not classic DPIs
  • Keep device dry Humidity is the enemy

Patients with very low inspiratory flow may not empty a DPI—technologist-level awareness matters when educating and when interpreting “no BD response” after a DPI dose in lab.

Nebulizer

Assemble cup, medication unit dose, tubing, mouthpiece or mask.

Sit upright; breathe calmly through mouthpiece until sputter/time complete per protocol.

Clean cup per infection-control instructions; home nebulizers grow biofilm if left wet.

Match diluent/drug to order—do not substitute concentrations.

Inhaled medication delivery performance in the lab

When the lab administers bronchodilator for spirometry response (Chapter 8) or pre-challenge holds:

Verify drug, dose, route, time, allergies, and order.

Use correct device (MDI+spacer vs neb) per SOP.

Coach technique; watch the patient take the dose.

Start the wait clock for post-BD spirometry (commonly ~10–15 minutes for SABA—follow SOP).

Document what was given and when.

Evaluate whether a failed BD response might be failed delivery , not failed pharmacology.

Validity: a “no response” study after the patient clearly mishandled the MDI without correction is a II.C problem as much as a clinical one.

  • Travel with Oxygen and Asthma Action Concepts (Technologist Level)
  • Travel with oxygen (education scope)

Teach high-level, safety-oriented facts; specific airline forms and medical clearances are clinic/physician processes:

Airlines generally do not allow personal compressed gas cylinders in the cabin the way patients expect; many require airline-approved portable oxygen concentrators (POCs) with battery-duration rules.

Patients must plan battery hours for gate delays, not just scheduled flight time.

Ground transport and destination supply need a plan before travel day.

Do not empty or modify tanks unsafely; no petroleum products on cannula/hands near O2; no smoking.

Cruise ships, high altitude destinations, and long road trips change O2 needs—escalate to the prescribing clinician for prescription adjustments.

Asthma action concepts (technologist level)

You reinforce the existence and use of a written asthma action plan (green/yellow/red zones) designed by the clinician:

  • Zone concept Patient action (general)
  • Green Usual controller medications; normal activity
  • Yellow Caution—add/increase rescue per plan; monitor symptoms/peak flow if used
  • Red Medical danger—rescue per plan and urgent/emergent care

Technologist role: encourage adherence to their plan, correct inhaler technique, and urge prompt care for red-zone symptoms. Do not rewrite medication doses on your own.

Peak-flow home monitoring, when used, needs personal best teaching and correct effort—similar quality rules to spirometry blasts.

Sputum Sample Collection Instruction (Brief)

When orders include sputum for culture, cytology, or acid-fast testing:

Explain difference between sputum (deep lung secretions) and saliva .

Prefer first-morning specimen for many protocols after rinsing mouth with water (not antiseptic mouthwash that kills organisms if culture is needed—follow lab manual).

Deep breath, hold, cough forcefully from the chest into sterile container; repeat to obtain adequate volume.

Close container without touching the inside; label at bedside/home with name, DOB, date/time.

Deliver promptly or refrigerate per microbiology instructions—do not leave in a hot car all day.

Induced sputum (hypertonic saline) is a supervised lab/procedure skill with bronchospasm risk—not a casual home activity.

Inadequate samples (saliva only) waste lab resources and delay diagnosis—teach-back reduces recollection rates.

Putting Education Validity Together (II.C concepts)

  • Situation Judgment
  • Patient return-demonstrates correct MDI+spacer Education goal met; proceed

Home spirometry app shows FEV1 0.3 L in a walking outpatient with prior lab FEV1 2.5 L Suspect technique/device error; do not treat as sudden catastrophic decline without verification

Home SpO2 log all 99–100% during documented severe exacerbation with cyanosis Device or user error until proven otherwise

Sputum cup half full of clear spit Reject as inadequate; re-instruct

Patient plans flight with only a tiny compressed cylinder and no airline POC approval Education incomplete—escalate before travel

Clinical Scenario

A lung-transplant clinic sends a patient to the PFT lab for home spirometer training plus review of inhaler technique before travel. You select education content covering home FVC/FEV1 efforts, infection control for the mouthpiece, and MDI+spacer technique ( II.A.3, II.A.10, II.A.11 ). The patient return-demonstrates three strong home-device blows and correct spacer use ( II.B ). You briefly review that their clinician-approved POC and batteries must be cleared with the airline—not a spare e-tank alone—and that yellow-zone symptoms mean follow their written action plan. For an ordered expectorated sputum culture the same morning, you coach a deep cough specimen after water rinse; the first attempt is saliva only—you re-coach and obtain a thicker specimen ( II.A.5 / II.C.5 validity of specimen ). Home data the following week shows a sudden 40% FEV1 drop with perfect app “quality stars” but the patient admits short efforts while reclining in bed—you flag technique failure rather than automatic rejection for retransplant workup without a confirmatory lab visit.

Link to Practice

Expect items on home spirometry/oximetry pitfalls, MDI vs DPI vs neb coaching, sputum vs saliva, and technologist-level O2 travel/asthma plan education. Drill free RPFT practice questions at /practice/rpft . Exercise, oxygen, and education skills in this chapter feed Domain III reliability and clinical implication items later in the guide.