Study guide
8.2 Performing Standard & Position-Variant Spirometry
NBRC Registered Pulmonary Function Technologist RPFT
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
1.1 Current Exam Facts 1.2 Content Outline Domains & Study Plan
2 Spirometry Instrumentation
2.1 Spirometer Types, Setup & Maintenance 2.2 Spirometer Calibration & Linearity 2.3 Spirometer Troubleshooting
3 Blood Gas & Gas Analyzers
3.1 Blood Gas Analyzer Setup, Maintain, Calibrate 3.2 Gas Analyzers & Water/Gas Absorbers 3.3 ABG & Gas Analyzer Troubleshooting and QC
4 Body Box, Exercise & Monitoring Equipment
4.1 Body Plethysmograph Setup & Calibration 4.2 Exercise, Field Walking & ECG Equipment 4.3 Pressure Devices, Valves & Gas Delivery Systems
5 Ancillary Equipment & Infection Control
5.1 Body Habitus, Sampling & Aerosol Equipment 5.2 Monitors & Emergency Management Equipment 5.3 Infection Control Materials & Methods
6 Quality Control Systems
6.1 Mechanical QC Devices 6.2 Biological Controls & Proficiency Testing 6.3 Laboratory Quality Management & SOPs
7 Patient Preparation & Safety
7.1 Body Habitus Measurements & Estimates 7.2 Patient Safety, Precautions & Adverse Events
8 Spirometry Procedures
8.1 Selecting Spirometry Protocols & Equipment 8.2 Performing Standard & Position-Variant Spirometry 8.3 Evaluating Spirometry Acceptability & Repeatability 8.4 Bronchodilator Response Studies
9 Static Lung Volumes
9.1 Gas Dilution Lung Volume Methods 9.2 Body Plethysmography Lung Volumes 9.3 Evaluating Lung Volume Validity
10 Diffusing Capacity (DLCO)
10.1 DLCO Protocol & Equipment Selection 10.2 Performing the DLCO Maneuver 10.3 Evaluating DLCO Validity
11 Blood Gas Sampling & Analysis Procedures
11.1 Arterial & Capillary Blood Sample Collection 11.2 Performing Blood Gas Analysis 11.3 CO-oximetry / Hemoximetry Procedures
12 Airway Responsiveness, Resistance & Muscle Strength
12.1 Bronchial Provocation Studies 12.2 Airways Resistance & Conductance by Plethysmography 12.3 Respiratory Muscle Strength (MIP/MEP/CPF)
13 Exercise, Oxygen, Home Testing & Education
13.1 Field Walking Tests (6MWT, Shuttle) 13.2 Monitored Exercise Testing 13.3 Oxygen Assessment & Titration 13.4 Home Testing Instruction & Patient Education
14 Calculations & Reference Ranges
14.1 Spirometry Calculations & Reference Equations 14.2 Lung Volume & DLCO Calculations/Corrections 14.3 Blood Gas & CO-oximetry Derived Calculations 14.4 Exercise, Oximetry & Special Test Calculations
15 Evaluating Result Reliability
15.1 Spirometry & Lung Volume Reliability 15.2 DLCO & Exercise Test Reliability 15.3 ABG, Monitoring & QC Reliability
16 Clinical Implications & Reporting
16.1 Pattern Recognition: Obstruction, Restriction, Mixed, Severity 16.2 Clinical Implications: DLCO, ABG, Airway Response, Exercise & Lab Context
8.2 Performing Standard & Position-Variant Spirometry
Key Takeaways Explain This Topic AI
NBRC Domain II.B.2 a/b requires correct performance of standard and position-variant spirometry, including coaching that produces maximal PEF, FEV1, and FVC
ATS/ERS 2019 end-of-test concepts include expiratory plateau (volume change ≤0.025 L for ≥1 s), long forced expiratory time when plateau is absent, or stopping when the patient cannot/should not continue safely
A complete FVC sequence typically moves from tidal breathing to maximal inspiration, explosive blast, complete exhalation, and often a maximal inspiration for the inspiratory limb of the loop
Children and elderly patients need simplified language, demonstration, more rest, and sometimes incentive displays—criteria for maximal effort still apply within age-appropriate expectations
Supine performance uses the same blast-and-empty principles with extra attention to seal, head position, safety, and rest between efforts compared with upright testing
Last updated: August 2026
From selected protocol to performed maneuver (II.B.2)
Domain II.B Perform task II.B.2 (standard and position-variant spirometry, outline a/b ) is where RPFT candidates earn—or lose—points on coaching quality. Instrumentation may be perfect and the protocol correctly chosen, yet poor blast, early stop, or leaky seal will destroy FEV1, FVC, and PEF. This section is the hands-on performance layer aligned with ATS/ERS 2019 spirometry technical standards concepts used throughout modern PFT practice and NBRC-style stems.
Goals of a well-performed forced maneuver
Each acceptable FVC effort should demonstrate:
Maximal inspiration to total lung capacity (TLC) before the blast.
Explosive start of forced expiration without hesitation (supports valid PEF and timed volumes).
Maximal effort throughout expiration without glottis closure, leak, or obstructed mouthpiece.
Complete exhalation to residual volume (RV) meeting end-of-test criteria concepts.
For full flow–volume loops, a maximal forced inspiration after emptying when the protocol includes the inspiratory limb.
Primary reported indices from these efforts include PEF (peak expiratory flow), FEV1 (forced expiratory volume in 1 second), and FVC (forced vital capacity), plus derived ratios and mid-flows used later in Domain III.
- Coaching the FVC maneuver step by step
- Setup in the chair (or supine surface)
Confirm upright seated posture: feet flat, no forward lean onto the knees, nose clip on, tight lip seal.
Explain the maneuver in plain language before the mouthpiece is busy: “Big breath in, blast out hard and fast, keep blowing until I say stop.”
Demonstrate with your own hands or a demo mouthpiece; show the on-screen target if available.
Tidal breathing to FVC transitions
A common, standards-aligned sequence:
Tidal breathing on the mouthpiece for several breaths so the patient settles and the seal is checked.
Maximal inspiration — coach “deeper… deeper… full lungs” to TLC. Incomplete inspiration is a major cause of low FVC and low PEF.
Blast — without pause at TLC if possible (or only a brief pause if needed for coordination; prolonged breath-hold at TLC can reduce PEF). Cue: “Blast! Hard and fast!”
Complete exhalation — immediately switch coaching tone from explosive to endurance: “Keep going… squeeze… more… more…” until end-of-test criteria or safety stop.
Maximal inspiration (when capturing FIVC/inspiratory loop): “Now big breath all the way in!”
Come off the mouthpiece, rest, and review the curve before the next effort.
Why tidal-to-forced transitions matter on the exam: stems may describe a patient who “starts blasting from mid-breath” or “does not take a full inspiration first.” Those are performance errors , not disease patterns, until proven otherwise.
PEF, FEV1, and FVC acquisition—what coaching targets
Index What the patient must do Common performance failure
PEF Maximal blast at the very start of expiration Hesitation, weak start, leak, tongue on mouthpiece, poor inspiration
FEV1 Strong early flow maintained through the first second Cough in first second, poor start (large back-extrapolation), submaximal effort
FVC Complete emptying to RV Early termination, glottis closure, leak, stopping when “tired of blowing”
Coach both the start and the finish. Technologists who only shout “blow hard” often get high PEF with truncated FVC; those who only say “empty all the way” may get long but non-explosive efforts with low PEF and distorted FEV1 timing.
End-of-test criteria concepts (ATS/ERS 2019)
ATS/ERS 2019 updated how we decide a forced expiration is sufficiently complete . For exam purposes, remember the concepts (software may flag them automatically):
Plateau concept
A satisfactory end of forced expiration includes an expiratory plateau on the volume–time display: volume change of about ≤0.025 L (25 mL) for at least 1 second . That plateau means the patient has essentially reached residual volume for that effort.
Duration when plateau is hard to achieve
Patients with severe obstruction may empty very slowly. Standards allow ending when forced expiratory time is long (commonly discussed around ≥15 seconds in adult practice under the 2019 framework) and the patient is still trying, or when continuing is not safe/possible—even if a perfect plateau never appears. Do not force endless blowing that causes syncope.
Patient cannot or should not continue
Stop the effort for dizziness, extreme distress, chest pain, or other safety concerns (Chapter 7). Document why the effort ended. Multiple incomplete efforts may still yield usable FEV1 even when FVC is limited—grading is section 8.3.
- Practical coaching language tied to EOT
- “Keep a tight seal—don’t stop when it feels empty; keep squeezing.”
Watch the volume–time curve: if volume is still rising steeply at 3–4 seconds in an adult, coach longer.
If the patient repeatedly stops at 2 seconds with no plateau, reteach rather than accepting three identical early terminations as “best possible” without trying to improve.
Exam trap: “FEV1 is all that matters, so stop at one second.” False—FVC and the full curve are required for pattern recognition, VC comparisons, and many quality rules.
Special coaching: children
Pediatric spirometry is a performance skill, not a smaller adult script.
Use age-appropriate vocabulary : “Blow out the candles,” “make the rocket fly,” rather than “maximize peak flow.”
Demonstrate exaggerated blast and long blow; children copy better than they parse abstract instructions.
Allow practice blows that are not scored emotionally as failures.
Use incentive animations when available, but do not let the child stop the moment the animation “wins” if emptying is incomplete—coach through the end.
Expect more trials and shorter attention; rest between efforts; involve a caregiver for calm, not for shouting over you.
Watch for leaks , laughing mid-blow, and incomplete inspiration—the same physiologic requirements apply within pediatric acceptability rules (repeatability numbers differ by age in standards; validity detail in 8.3).
Special coaching: elderly and frail adults
Speak clearly; reduce multi-step instructions into chunks.
Allow longer recovery between efforts to avoid fatigue-related declining FVC.
Address dentures : loose dentures break seals—remove if they interfere and the patient can seal without them, or use a flanged mouthpiece per lab practice.
Cognitive impairment: model the maneuver, use hand signals for “blast” vs “keep going,” and limit total attempts to avoid exhaustion while still seeking three acceptable efforts when possible.
Fear of “running out of air”: explain that the next breath will be a big inspiration after the blow; stay visible and calm.
Performing position-variant (supine) spirometry
Once II.A selected an upright/supine protocol, II.B requires competent performance in both positions.
Upright phase
Perform standard maximal efforts first when possible so the patient learns the maneuver while stronger and less orthopneic. Obtain acceptable upright FVC/FEV1 before moving.
Transition to supine
Assist safely to full supine or near-supine per protocol; support the head; avoid extreme neck flexion.
Re-apply nose clip; re-establish seal; allow several quiet tidal breaths for adaptation.
Watch for orthopnea, desaturation if monitored, or panic—safety overrides data.
Supine forced maneuver differences
Aspect Performance note
Inspiration to TLC Harder; coach “fill the top of the chest” with hands lightly on lower ribs if lab practice allows tactile cueing
- Blast Same explosive cue; gravity and abdominal contents change mechanics—effort must still be maximal
- Complete emptying May feel more dyspneic; more rest between trials
- Interface Tubing tension can pull the mouthpiece—support the circuit
- Number of efforts May need more attempts; stop for intolerance
Report upright and supine values clearly labeled. Do not average positions together.
Session workflow that exam items assume
Confirm protocol and pre-test status (8.1).
Demonstrate and practice.
Collect forced efforts aiming for at least three acceptable maneuvers when possible (acceptability formalized in 8.3), usually with a practical upper limit around eight attempts to avoid fatigue.
Rest 30–60 seconds or more between maximal efforts as needed.
Review PEF, FEV1, FVC, and curve shape after each blow; give specific feedback (“blast harder at the very start” vs vague “do better”).
For position-variant: complete upright set → reposition → supine set with re-instruction.
For bronchodilator protocols: complete valid pre set before drug (8.4).
Common performance errors and real-time fixes
- Error observed Immediate coaching fix
- Hesitant start / slow PEF rise “No soft start—blast like a cough at the beginning”
- Incomplete inspiration Practice TLC breath off-mouthpiece; then combine
- Early termination Point to rising volume–time curve; count aloud during long blow
- Glottis closure / Valsalva “Keep the throat open; continuous wind, not push-and-stop”
- Leak at lips Mirror feedback; flanged mouthpiece; dry lips; denture check
- Cough in first second Rest; sip water if appropriate; softer initial cue then rebuild blast
- Nested breaths / extra inspiration mid-FVC Restart; emphasize continuous single blow
- What “good performance” looks like on the display
Flow–volume loop: rapid rise to PEF, smooth descending limb without large notches from leak or glottis closure, and (if recorded) a full inspiratory loop.
Volume–time: steep early rise, then approach to plateau without abrupt flatline at 1–2 seconds in patients who can empty further.
Efforts that improve with coaching show rising PEF/FEV1/FVC toward a plateau across trials—your job is to drive that improvement until criteria or safety limits are reached.
RPFT performance vignettes
Vignette 1: Adult with COPD blows hard for 2 seconds then stops, FVC far below prior SVC. Action: reteach complete emptying, coach through plateau/long FET, do not accept early stop as “obstruction only” without attempting full FVC.
Vignette 2: Child laughs and leaks every blast. Action: pause, demonstrate, shorter sessions, incentive device, caregiver quiet support—performance skill, not automatic “unable to test” after one try.
Vignette 3: Supine ALS patient desaturates and panics after one effort. Action: stop, sit up, stabilize—safety first; document limited data rather than forcing three heroic supine FVCs.
Link forward
Performance produces raw efforts; Domain II.C.2 decides which efforts are acceptable , whether FEV1/FVC are repeatable , and how to grade sessions that never fully meet ideal criteria (section 8.3). Bronchodilator sessions reuse these same performance skills after drug delivery (section 8.4).