Study guide
1.2 Compass Deviation, Deviation Cards & Swinging the Compass
RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Magnetic Compass, Variation & Deviation
1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
2 Chapter 2: Dead Reckoning, Estimated Position & Leeway
2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream
3 Chapter 3: Course to Steer, Vector Triangles & Position Lines
3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids
4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations
4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths
5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters
5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects
6 Chapter 6: IRPCS Steering & Sailing Rules
6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)
7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals
7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)
8 Chapter 8: The IALA Maritime Buoyage System
8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks
9 Chapter 9: Meteorology, Synoptic Systems & Depressions
9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs
10 Chapter 10: Local Coastal Weather, Fog & Forecasts
10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation
11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V
11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances
12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications
12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery
1.2 Compass Deviation, Deviation Cards & Swinging the Compass
Key Takeaways Explain This Topic AI
Compass deviation is the heading-dependent deflection of a marine compass needle caused by the vessel's internal magnetic fields (engine, keel, metal hull, wiring, and electronics).
Hard iron creates permanent magnetic fields with fixed polarity, whereas soft iron acquires transient induced magnetism that rotates and changes intensity as the vessel alters heading.
A deviation card documents the residual compass error across cardinal and intercardinal headings, requiring linear interpolation for intermediate courses.
The conversion rule CADET ('Compass to True, Add East') dictates adding Easterly errors and subtracting Westerly errors when converting toward True; the signs reverse when converting True to Compass.
Swinging the compass determines deviation by taking compass bearings of known charted transits (leading marks) on multiple ship headings and comparing them to the calculated magnetic bearing.
Last updated: November 2026
1.2 Compass Deviation, Deviation Cards & Swinging the Compass
Note
While variation is caused by Earth's geomagnetic field and depends on geographic location, deviation is caused by magnetic materials within the vessel itself. Deviation deflects the compass needle depending on which heading the vessel is steering relative to Earth's magnetic flux lines.
What Causes Vessel Deviation
Every vessel carries an internal magnetic field that distorts the magnetic environment around the steering compass. This localized distortion pulls the compass needle away from Magnetic North toward an erroneous heading known as Compass North . The angular difference between Magnetic North and Compass North is defined as Compass Deviation .
Deviation is named by its direction of pull:
Easterly Deviation (E / +) : The needle is deflected east (right) of Magnetic North.
Westerly Deviation (W / -) : The needle is deflected west (left) of Magnetic North.
Uncorrected 5° deviation causes roughly 1 nautical mile of lateral drift for every 12 miles sailed.
Hard Iron vs. Soft Iron Magnetism
Vessel magnetism originates from two primary physical sources, plus electromagnetic interference:
1. Hard Iron Magnetism (Permanent)
Hard iron consists of ferrous metals retaining permanent magnetism. During construction, steel hull plating, the engine block, and bulkheads absorb Earth's magnetic field as they are welded and worked, creating a permanent magnetic field fixed to the hull.
Behavior : Constant field strength and fixed polarity regardless of heading.
Correction : Compensated by inserting permanent magnetic correctors (B and C magnets) into binnacle adjustment slots.
2. Soft Iron Magnetism (Induced)
Soft iron includes ferrous components with high permeability and low retentivity, such as mild steel rigging, deck winches, anchor chains, and brackets. Soft iron does not retain permanent magnetism; instead, it is temporarily magnetized by Earth's field.
Behavior : As the vessel turns, soft iron components alter their orientation relative to Earth's flux lines, causing induced field strength and polarity to shift every 90 degrees of turn (quadrantal deviation).
Correction : Compensated by mounting soft-iron spheres (Kelvin's spheres) on opposite sides of the binnacle.
3. Electromagnetic Interference
Direct current flowing through shipboard wiring produces localized magnetic fields. Common culprits include autopilot drives, VHF microphones with internal magnets, mobile phones, searchlights, and wiper motors.
Warning
Keep phones, tools, and magnetic mounts at least 1 metre away from the steering compass; nearby electronics can induce 10° to 15° of sudden deviation.
Why Deviation Changes with Ship's Heading
Deviation varies continuously as the vessel turns:
Heading North or South, the longitudinal hard-iron field aligns parallel to Earth's magnetic meridian, producing minimal lateral needle deflection.
Heading East or West, the longitudinal field swings perpendicular to the needle, exerting maximum lateral pull and producing peak deflection.
Plotted across 360°, deviation forms a characteristic S-curve alternating between Easterly and Westerly values.
The Deviation Card
Residual errors after physical compensation are tabulated in a Deviation Card mounted at the helm:
- Ship's Heading (Compass) Deviation Magnetic Heading
- 000°C 1° E 001°M
- 030°C 3° E 033°M
- 060°C 4° E 064°M
- 090°C 3° E 093°M
- 120°C 1° E 121°M
- 150°C 1° W 149°M
- 180°C 3° W 177°M
- 210°C 4° W 206°M
- 240°C 3° W 237°M
- 270°C 1° W 269°M
- 300°C 0° 300°M
- 330°C 1° E 331°M
For intermediate headings, interpolate linearly (e.g., heading 045°C between 030°C [+3°E] and 060°C [+4°E] yields +3.5°E, applied as 3°E or 4°E).
The Full Conversion Chain: CADET & Reverse Rules
Converting between compass readings and chart tracks involves five linked components:
- Compass (C) ⟷ Deviation (D) ⟷ Magnetic (M) ⟷ Variation (V) ⟷ True (T)
- 1. Converting Compass to True (CADET Rule)
- CADET : C ompass to A dd D irection E ast T rue
Moving from Compass toward True: Add East errors (+), Subtract West errors (-).
2. Converting True to Compass (Chart to Steering)
Moving from True toward Compass: Subtract East errors (-), Add West errors (+).
Mnemonic: "True Virgins Make Dull Companions: At Each Wedding" (True → Variation → Magnetic → Deviation → Compass: A dd W est, S ubtract E ast).
3. Compass Best / Compass Least Rule
Error West, Compass Best : If error is West, Compass reading is larger than Magnetic.
Error East, Compass Least : If error is East, Compass reading is smaller than Magnetic.
- Worked Navigation Conversion Scenarios
- Scenario A: Chart Course to Compass Course to Steer
A navigator requires a heading of 199° True . Variation is 7° West . Using the deviation table above:
True to Magnetic : Add West variation:
Magnetic Heading = 199°T + 7° = 206°M.
Find the Compass Heading : The table is indexed by compass heading . Its 210°C row gives 4°W deviation and the required 206°M heading.
Check Magnetic to Compass : Add West deviation:
Compass Heading = 206°M + 4° = 210°C.
The skipper orders 210°C . For an intermediate value, interpolate between the magnetic-heading entries to find the corresponding compass heading.
Scenario B: Observed Compass Bearing to Chart True Bearing
A vessel is steering 090°C . The crew sights a lighthouse bearing 088°C on the steering compass. Variation is 4° West .
Important
Extract deviation for the vessel's heading (090°C), never for the bearing of the mark!
From the table, deviation on heading 090°C is 3° East .
Compass to Magnetic : CADET dictates adding East:
Magnetic Bearing = 088°C + 3°E = 091°M
Magnetic to True : CADET dictates subtracting West:
True Bearing = 091°M - 4°W = 087°T
The navigator plots 087°T from the lighthouse onto the chart.
Swinging the Compass on Charted Transits
Swinging the compass determines residual deviation across headings:
Identify two charted visual landmarks in line forming a transit (leading line).
Measure True transit bearing directly from chart (e.g., 184°T).
Convert to Magnetic transit bearing using current variation: 184°T + 3°W = 187°M.
Motor across transit line on eight principal compass headings (000°, 045°, 090°, etc.).
As marks align, record observed compass bearing of transit.
Calculate deviation using: Deviation = Magnetic Bearing - Compass Bearing.
If transit reads 183°C: Compass is least, so deviation is 4° East .
If transit reads 191°C: Compass is best, so deviation is 4° West .