Study guide
1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Magnetic Compass, Variation & Deviation
1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
2 Chapter 2: Dead Reckoning, Estimated Position & Leeway
2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream
3 Chapter 3: Course to Steer, Vector Triangles & Position Lines
3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids
4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations
4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths
5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters
5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects
6 Chapter 6: IRPCS Steering & Sailing Rules
6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)
7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals
7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)
8 Chapter 8: The IALA Maritime Buoyage System
8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks
9 Chapter 9: Meteorology, Synoptic Systems & Depressions
9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs
10 Chapter 10: Local Coastal Weather, Fog & Forecasts
10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation
11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V
11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances
12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications
12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery
1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
Key Takeaways Explain This Topic AI
The Mercator projection is conformal: rhumb lines cross meridians at a constant true angle and appear straight. Allow for tide, leeway and compass errors to find the heading needed to follow that track.
Because meridians are drawn as parallel vertical lines rather than converging, the latitude scale expands by the secant of latitude (sec φ), causing massive area distortion toward the poles.
The Golden Rule of Navigation dictates that distance must always be measured on the latitude scale directly abreast of the vessel's track, because 1 minute of latitude equals 1 nautical mile (1' = 1 NM).
Distance must never be measured on the longitude scale because meridians physically converge toward the poles, meaning 1 minute of longitude equals 1 NM × cos(latitude).
Modern Admiralty charts reference depths and soundings to Chart Datum (approximately Lowest Astronomical Tide), underline drying heights, and reference vertical clearances to Highest Astronomical Tide.
Last updated: November 2026
1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
Note
The Mercator projection is commonly used for nautical charts because it depicts lines of constant true direction ( rhumb lines ) as straight lines. Preserving angular fidelity requires the latitude scale to expand progressively toward the poles, making the adjacent latitude scale the only valid ruler for measuring distance.
Principles of the Mercator Projection
Marine navigation requires representing curved Earth on a flat chart sheet. Formulated by Gerardus Mercator in 1569, the Mercator projection is a conformal cylindrical projection :
Meridians of longitude are projected as parallel, equidistant vertical lines that do not converge.
Parallels of latitude are horizontal lines intersecting meridians at 90-degree right angles.
The projection is conformal : local angles, directions, and shapes are preserved accurately around any point. A 90-degree harbour entrance or headland angle appears as an exact right angle on the chart.
The Rhumb Line Property vs. Great Circles
The paramount practical feature of the Mercator projection is its treatment of rhumb lines :
Rhumb Line (Loxodrome) : A path crossing all meridians at the same constant angle. On a Mercator chart it appears straight. Measure its true direction against a meridian, then allow for tide, leeway, variation and deviation to find the heading to steer. Reassess those allowances as conditions change.
Great Circle Track (Orthodrome) : The shortest route between two points on a globe. Except along meridians and the equator, great circles curve toward the pole on a Mercator chart. Coastal chartwork normally uses straight rhumb-line legs; long ocean routes may use great-circle waypoints.
Distortion & The Expanding Latitude Scale
On Earth, meridians converge toward the poles, with east-west separation decreasing with cosine of latitude:
Departure (Distance) = Difference of Longitude (minutes) × cos(Latitude)
At the equator, 1 minute of longitude equals 1 nautical mile (1 NM). At 60°N/S, cos(60°) = 0.5, so 1 minute of longitude is physically only 0.5 NM.
Because meridians are drawn parallel, the east-west scale stretches with latitude. To preserve conformality, the north-south latitude scale expands by the exact same proportion:
Latitude Scale Expansion = sec(Latitude) = 1 / cos(Latitude)
Spacing between parallels expands rapidly with latitude:
At 0° (Equator): Scale factor = 1.0.
At 50°N (English Channel): Scale factor = 1.55 (+55%).
At 60°N (North Sea): Scale factor = 2.00 (+100%).
Consequently, Greenland appears comparable in size to Africa on a Mercator chart, even though Africa is fourteen times larger.
The Golden Rule: Measuring Distance on the Latitude Scale
By international agreement, one nautical mile (1 NM) is defined as exactly 1,852 metres, corresponding to one minute of latitude (1') :
- 1 Nautical Mile = 1 minute of latitude (1' Lat)
- 1 Cable = 0.1 NM ≈ 185.2 metres
Because meridians converge, one minute of longitude is never equal to one nautical mile (except at the equator).
Caution
The Golden Rule of Navigation :
Distance must ALWAYS be measured on the latitude scale printed on the vertical side borders of the chart, directly abreast of the track being measured. NEVER measure distance using the horizontal longitude scale. Using longitude minutes at 50°N introduces an error exceeding 35%, leading to dangerous miscalculations of vessel speed, fuel, and ETA.
Distance Measuring Protocol
Open dividers to span the distance between two waypoints.
Transfer dividers horizontally to the nearest vertical latitude margin .
Align dividers directly abreast of the track (vertically centred between the two waypoints' latitudes).
Read distance directly in nautical miles (minutes of latitude) and tenths (cables).
For long passages, step off distance in convenient increments (e.g., 5 or 10 NM), resetting the divider opening to match the changing local latitude scale.
Hydrographic Depths, Soundings & Drying Heights
Modern Admiralty charts standardize depths to vertical datums:
Soundings (Charted Depths) : Depths in metres and decimetres (e.g., 8.4m) are referenced to the stated Chart Datum (CD) , normally approximately Lowest Astronomical Tide (LAT) in UK tidal waters. Add the height of tide and allow for survey uncertainty and seabed change when assessing clearance.
Drying Heights : Features uncovering at low water are shaded green with underlined figures (e.g., 1.4m underlined). This denotes height above Chart Datum .
Contour Shading : Blue tint emphasizes shallow water. Read the labelled contours and chart notes to identify the depth bands; the darkest tint shows the shallowest water.
Chart Symbols: Hazards & Seabed Nature
Standard hydrographic symbols classify underwater obstructions:
- Chart Symbol Feature Meaning Navigational Action
- + with four dots (INT 1 K12) Rock awash at Chart Datum Allow for tidal height and keep a safe clearance
+ without dots (K13) Depth unknown; dangerous to surface navigation Do not infer clearance from nearby soundings
Underwater rock with a depth (K14/K15) Charted depth over the rock Add tide and compare with draught plus safety margin
Wreck with exposed hull or superstructure (K24) Part visible at Chart Datum Avoid the whole obstruction, including submerged parts
Wreck with only masts visible (K25) Hull remains submerged at Chart Datum Do not confuse visible masts with the wreck's full extent
Wreck with unknown least depth (K28/K29) Clearance is uncertain Consult the chart symbol and notes; no symbol guarantees safe passage
Nature of the Seabed (Anchoring Grounds)
Abbreviation Seabed Composition Holding Quality
M Mud Variable : Sticky mud may hold well; very soft mud may hold poorly.
Cy Clay Good when penetrable : Check that the anchor has dug in and holds.
S Sand Good : Reliable in firm sand; loose sand may drag.
Sh Shell Moderate/Poor : Shell fragments hinder anchor bite.
G / P / St Gravel / Pebbles / Stones Poor : Flukes cannot dig in; high drag risk.
Rk Rock Foul : Extreme drag risk; anchor may wedge.
Wd Weed / Kelp Foul : Weed clogs flukes, preventing penetration.
Chart Datums & Notices to Mariners (NTMs)
Geodetic Datums : Modern GPS coordinates reference WGS84 . Older charts surveyed on regional datums (OSGB36, ED50) include a datum shift note (e.g., "Positions from satellite navigation systems must be shifted 0.07' N and 0.08' E to match this chart" ). Plotted without adjustment, a GPS fix could misplace a vessel onto a reef.
Notices to Mariners (NTMs) : Admiralty charts must be updated using weekly NTMs for permanent corrections (new wrecks, altered buoys) and temporary notices (T&P notices for dredging or unlit aids). Record corrections in the small-corrections box.