Study guide

3.2 Multi-Hour Courses to Steer & Changing Tidal Streams

RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Magnetic Compass, Variation & Deviation

1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales

2 Chapter 2: Dead Reckoning, Estimated Position & Leeway

2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream

3 Chapter 3: Course to Steer, Vector Triangles & Position Lines

3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids

4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations

4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths

5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters

5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects

6 Chapter 6: IRPCS Steering & Sailing Rules

6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)

7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals

7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)

8 Chapter 8: The IALA Maritime Buoyage System

8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks

9 Chapter 9: Meteorology, Synoptic Systems & Depressions

9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs

10 Chapter 10: Local Coastal Weather, Fog & Forecasts

10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation

11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V

11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances

12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications

12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery

3.2 Multi-Hour Courses to Steer & Changing Tidal Streams

Key Takeaways Explain This Topic AI

On passages exceeding one hour, tidal streams frequently change in direction and rate; navigators must choose between stepped hourly CTS calculations and a single composite multi-hour vector.

Stepped CTS calculations help plan track-keeping where sea room is limited. Check position and adjust the plan often enough for the hazards; hourly calculations alone do not guarantee clearance.

Composite CTS vectorially sums consecutive hourly tidal streams end-to-tail into one net tide vector, but can create substantial mid-passage cross-track error that can sweep a vessel miles off track into shoals, TSS lanes, or adverse races.

At a necessary TSS crossing, Rule 10(c) requires a heading as close as practicable to perpendicular to traffic flow. This concerns where the bow points, not a prescribed plotting method or the resulting ground track.

A multi-hour duration trial must be checked against the ground distance achieved. A net cross-tide can make the yacht fall short; use the tide for the remaining interval to recalculate the final course and arrival time.

Last updated: November 2026

3.2 Multi-Hour Courses to Steer & Changing Tidal Streams

Note

Core Principle: In semi-diurnal tidal waters, reversing streams commonly turn roughly every six hours; rotary streams change direction continuously. Use the local tidal-stream data for the actual pattern and timing. On passages lasting longer than one hour, a single 1-hour vector triangle cannot represent cumulative water movement. Navigators must choose between Stepped Hourly Courses and a Single Composite Vector Triangle based on sea room, navigational hazards, and track discipline.

When planning a passage across open sounds, bights, or channels, the skipper must balance steering efficiency against spatial safety. Tidal streams cannot simply be averaged by taking an arithmetic mean of direction and speed. They must be resolved as vectors, either hour-by-hour or as a cumulative vector sum.

Method 1: Stepped Hourly Courses to Steer

In the stepped method, the navigator divides the voyage into 1-hour segments and calculates a fresh Course to Steer for each consecutive hour:

Hour 1: From departure Waypoint A, lay off Hour 1 tide. Swing 1 hour STW to intersect the ground track at Ground Waypoint 1 (GW1) . Derive CTS for Hour 1.

Hour 2: From GW1, lay off Hour 2 tide. Swing 1 hour STW to intersect the ground track at Ground Waypoint 2 (GW2) . Derive CTS for Hour 2.

Consecutive Hours: Repeat for each subsequent hour until reaching destination B.

Practical Advantages and Limitations

Track-Keeping: With the assumed constant vectors, each step follows the planned line. In practice, changing tide, leeway and steering errors require position checks and adjustments between calculated hourly positions.

Planned Clearances: Check each leg against hazards and position uncertainty; the plotted line alone does not ensure the actual yacht maintains its clearance.

Operational Cost: Requires course alterations every hour, resetting compass headings, and re-trimming sails or re-balancing helm on sailing vessels.

Method 2: Single Composite Vector Triangle

When navigating across wide, deep waters clear of hazards, computing a single composite course avoids hourly alterations. The composite method sums consecutive tidal vectors into one resultant vector before swinging the total distance run through water.

Construction Steps (3-Hour Passage)

Draw Total Ground Track: Connect departure Point A to destination Point B with a line marked with two arrowheads ( >> ).

Sum Tidal Vectors End-to-Tail:

From departure Point A, lay off tidal vector for Hour 1 to point T 1 T_1 T 1 ​ .

From point T 1 T_1 T 1 ​ , lay off tidal vector for Hour 2 to point T 2 T_2 T 2 ​ .

From point T 2 T_2 T 2 ​ , lay off tidal vector for Hour 3 to Point C .

Line AC represents the Net Cumulative Tidal Vector . Mark line AC with three arrowheads ( >>> ).

Calculate Total Distance Through Water: Total Water Run = STW (knots) × Total Duration (hours) \text{Total Water Run} = \text{STW (knots)} \times \text{Total Duration (hours)} Total Water Run = STW (knots) × Total Duration (hours) For example, 5.0 knots × 3 hours = 15.0 NM.

Swing Total Distance Arc: Place dividers set to 15.0 NM at Point C (cumulative tide tip), and swing an arc to intersect the Ground Track line at Point D .

Derive the Single Water Track: Draw line CD, marked with one arrowhead ( > ). Direction from C to D is the single True Water Track to steer for the entire 3 hours.

Apply Leeway, Variation, and Deviation: Correct this True course through CADET to establish the compass course.

The Mid-Passage Cross-Track Hazard (The "Banana Curve")

The fundamental danger of composite CTS is that even when the duration has been solved to reach the destination, the yacht need not follow the straight ground track during intermediate hours . Instead, the yacht traces a curved trajectory over the seabed (the "banana curve") as varying hourly tides sweep it laterally.

If the tidal stream sets strongly east during the first two hours, the yacht will be swept several nautical miles east of the track before a reversing tide in the third hour carries it back west. If an offshore shoal, wind farm, or shipping lane lies 1 to 2 miles east of the drawn track line, a yacht on a composite CTS will wander directly into danger.

  • Worked Numerical Comparison: Stepped vs. Composite CTS
  • Passage Parameters

Track: 15.0 NM due South (Ground Track = 180° True).

Yacht STW: 5.0 knots (Nominal 3-hour water run = 15.0 NM).

Hourly Tidal Streams:

  • Hour 1: Set = 090°(T), Drift = 2.5 knots (2.5 NM East)
  • Hour 2: Set = 090°(T), Drift = 1.5 knots (1.5 NM East)
  • Hour 3: Set = 270°(T), Drift = 1.0 knot (1.0 NM West)
  • Composite CTS Resolution

Net Cumulative Tidal Vector (AC): Net Drift = + 2.5 NM + 1.5 NM − 1.0 NM = + 3.0 NM East (090°T) \text{Net Drift} = +2.5\text{ NM} + 1.5\text{ NM} - 1.0\text{ NM} = +3.0\text{ NM East (090°T)} Net Drift = + 2.5 NM + 1.5 NM − 1.0 NM = + 3.0 NM East (090°T)

Vector Triangle Geometry: From Point C (3.0 NM East), swing a 15.0 NM arc across the 180°(T) ground track: sin ⁡ ( θ ) = 3.0 NM 15.0 NM = 0.2000 ⟹ θ = 11.54 ∘ ≈ 11.5 ∘ \sin(\theta) = \frac{3.0\text{ NM}}{15.0\text{ NM}} = 0.2000 \implies \theta = 11.54^\circ \approx 11.5^\circ sin ( θ ) = 15.0 NM 3.0 NM ​ = 0.2000 ⟹ θ = 11.5 4 ∘ ≈ 11. 5 ∘ Because net tide sets East, steer 11.5° West of South into the stream: Composite True CTS = 191.5 ∘ (T) ≈ 192 ∘ (T) \mathbf{\text{Composite True CTS} = 191.5^\circ\text{(T)} \approx 192^\circ\text{(T)}} Composite True CTS = 191. 5 ∘ (T) ≈ 19 2 ∘ (T)

Southward Ground Progress in 3 Hours: Because the ground track (180°T) and tidal stream (090°T) are perpendicular, the achieved ground progress is the adjacent side of the right-angled vector triangle: Ground Progress composite = 15.0 2 − 3.0 2 = 225 − 9 = 216 ≈ 14.70 NM South (14.697 NM) \text{Ground Progress}_{\text{composite}} = \sqrt{15.0^2 - 3.0^2} = \sqrt{225 - 9} = \sqrt{216} \approx \mathbf{14.70\text{ NM South (14.697 NM)}} Ground Progress composite ​ = 15. 0 2 − 3. 0 2 ​ = 225 − 9 ​ = 216 ​ ≈ 14.70 NM South (14.697 NM) Average Speed Over Ground: SOG avg = 14.70 NM 3 hr = 4.90 knots \text{SOG}_{\text{avg}} = \frac{14.70\text{ NM}}{3\text{ hr}} = 4.90\text{ knots} SOG avg ​ = 3 hr 14.70 NM ​ = 4.90 knots .

Cross-Track Position at Hour 2:

Steaming 2 hours on 191.5°(T) at 5.0 kn moves the boat 10.0 × sin ⁡ ( 11.54 ∘ ) = 2.0 NM West 10.0 \times \sin(11.54^\circ) = 2.0\text{ NM West} 10.0 × sin ( 11.5 4 ∘ ) = 2.0 NM West through water.

Cumulative tidal drift during Hours 1 and 2 is 2.5 + 1.5 = 4.0 NM East 2.5 + 1.5 = 4.0\text{ NM East} 2.5 + 1.5 = 4.0 NM East .

Net lateral displacement over ground: + 4.0 NM − 2.0 NM = + 2.0 NM East of track line! +4.0\text{ NM} - 2.0\text{ NM} = \mathbf{+2.0\text{ NM East of track line!}} + 4.0 NM − 2.0 NM = + 2.0 NM East of track line!

If an offshore sandbank lies 1.5 NM East of the planned line, the composite course causes grounding before the tide turns.

Stepped CTS Resolution

Hour 1 (Tide 2.5 kn East): sin ⁡ ( θ 1 ) = 2.5 5.0 = 0.5000 ⟹ θ 1 = 30.0 ∘ ⟹ CTS 1 = 210 ∘ (T) \sin(\theta_1) = \frac{2.5}{5.0} = 0.5000 \implies \theta_1 = 30.0^\circ \implies \mathbf{\text{CTS}_1 = 210^\circ\text{(T)}} sin ( θ 1 ​ ) = 5.0 2.5 ​ = 0.5000 ⟹ θ 1 ​ = 30. 0 ∘ ⟹ CTS 1 ​ = 21 0 ∘ (T) Ground Progress 1 = 5.0 2 − 2.5 2 = 18.75 ≈ 4.33 NM South (4.3301 NM) ( SOG 1 = 4.33 kn ) \text{Ground Progress}_1 = \sqrt{5.0^2 - 2.5^2} = \sqrt{18.75} \approx \mathbf{4.33\text{ NM South (4.3301 NM)}} \quad (\text{SOG}_1 = 4.33\text{ kn}) Ground Progress 1 ​ = 5. 0 2 − 2. 5 2 ​ = 18.75 ​ ≈ 4.33 NM South (4.3301 NM) ( SOG 1 ​ = 4.33 kn ) Cross-track offset = 0.0 NM (pinned to 180°T line at GW1).

Hour 2 (Tide 1.5 kn East): sin ⁡ ( θ 2 ) = 1.5 5.0 = 0.3000 ⟹ θ 2 = 17.5 ∘ ⟹ CTS 2 = 197.5 ∘ (T) ≈ 198 ∘ (T) \sin(\theta_2) = \frac{1.5}{5.0} = 0.3000 \implies \theta_2 = 17.5^\circ \implies \mathbf{\text{CTS}_2 = 197.5^\circ\text{(T)} \approx 198^\circ\text{(T)}} sin ( θ 2 ​ ) = 5.0 1.5 ​ = 0.3000 ⟹ θ 2 ​ = 17. 5 ∘ ⟹ CTS 2 ​ = 197. 5 ∘ (T) ≈ 19 8 ∘ (T) Ground Progress 2 = 5.0 2 − 1.5 2 = 22.75 ≈ 4.77 NM South (4.7697 NM) ( SOG 2 = 4.77 kn ) \text{Ground Progress}_2 = \sqrt{5.0^2 - 1.5^2} = \sqrt{22.75} \approx \mathbf{4.77\text{ NM South (4.7697 NM)}} \quad (\text{SOG}_2 = 4.77\text{ kn}) Ground Progress 2 ​ = 5. 0 2 − 1. 5 2 ​ = 22.75 ​ ≈ 4.77 NM South (4.7697 NM) ( SOG 2 ​ = 4.77 kn ) Cumulative southward progress after 2 hours: 4.3301 + 4.7697 = 9.10 NM South 4.3301 + 4.7697 = 9.10\text{ NM South} 4.3301 + 4.7697 = 9.10 NM South . Cross-track offset = 0.0 NM .

Hour 3 (Tide 1.0 kn West): sin ⁡ ( θ 3 ) = 1.0 5.0 = 0.2000 ⟹ θ 3 = 11.5 ∘ ⟹ CTS 3 = 168.5 ∘ (T) ≈ 168 ∘ (T) \sin(\theta_3) = \frac{1.0}{5.0} = 0.2000 \implies \theta_3 = 11.5^\circ \implies \mathbf{\text{CTS}_3 = 168.5^\circ\text{(T)} \approx 168^\circ\text{(T)}} sin ( θ 3 ​ ) = 5.0 1.0 ​ = 0.2000 ⟹ θ 3 ​ = 11. 5 ∘ ⟹ CTS 3 ​ = 168. 5 ∘ (T) ≈ 16 8 ∘ (T) Ground Progress 3 = 5.0 2 − 1.0 2 = 24 ≈ 4.90 NM South (4.8990 NM) ( SOG 3 = 4.90 kn ) \text{Ground Progress}_3 = \sqrt{5.0^2 - 1.0^2} = \sqrt{24} \approx \mathbf{4.90\text{ NM South (4.8990 NM)}} \quad (\text{SOG}_3 = 4.90\text{ kn}) Ground Progress 3 ​ = 5. 0 2 − 1. 0 2 ​ = 24 ​ ≈ 4.90 NM South (4.8990 NM) ( SOG 3 ​ = 4.90 kn ) Cross-track offset = 0.0 NM .

Total Stepped Progress in 3 Hours: Total Ground Run stepped = 4.3301 + 4.7697 + 4.8990 = 14.00 NM South (13.999 NM) \text{Total Ground Run}_{\text{stepped}} = 4.3301 + 4.7697 + 4.8990 = \mathbf{14.00\text{ NM South (13.999 NM)}} Total Ground Run stepped ​ = 4.3301 + 4.7697 + 4.8990 = 14.00 NM South (13.999 NM)

The Essential Reality: Duration Trial vs. Ground Progress

Warning

The Critical Distinction: Neither composite CTS (14.70 NM) nor stepped CTS (14.00 NM) reaches the stated 15.0 NM destination in exactly 3 hours! Navigators must understand that dividing planned passage distance by Speed Through Water ( 15.0 NM / 5.0 kn = 3 hours 15.0\text{ NM} / 5.0\text{ kn} = 3\text{ hours} 15.0 NM /5.0 kn = 3 hours ) yields only an initial duration trial , not an arrival guarantee.

Why Ground Progress Falls Short

For the purely east-west tides in this example, crabbing reduces the southward component of the water velocity:

In a purely beam tide, holding the ground-track direction makes SOG less than STW. A tide with a favourable along-track component can instead make SOG exceed STW; use the complete vector sum.

In Stepped CTS, the heavy 2.5-knot beam tide in Hour 1 forces a 30° crab angle, slashing SOG to 4.33 knots. Over 3 hours, cumulative ground progress is only 14.00 NM , leaving the yacht 1.00 NM short of Waypoint B.

In Composite CTS, a constant 11.5° crab angle produces an average SOG of 4.90 knots. Cumulative ground progress is 14.70 NM , leaving the yacht 0.30 NM short of Waypoint B.

How Navigators Solve the Remaining Distance

The three-hour data do not specify the tide after Hour 3, so they do not determine an arrival time. Obtain that tide before extending either plot.

For a completed exercise extension , assume the tide remains 270°T at 1.0 knot throughout Hour 4 , with STW still 5.0 knots and no leeway. Both boats are on the planned line after three hours. A fresh triangle gives a water track of 168.5°T and southward SOG of 4.899 knots :

Stepped arrival: Remaining distance is 15.0 − 13.9988 = 1.0012 15.0-13.9988=1.0012 15.0 − 13.9988 = 1.0012 NM. Time is 1.0012 / 4.899 × 60 = 12.3 1.0012/4.899 \times 60=12.3 1.0012/4.899 × 60 = 12.3 minutes, giving a total of about 3 hours 12 minutes .

Composite arrival: Remaining distance is 15.0 − 14.6969 = 0.3031 15.0-14.6969=0.3031 15.0 − 14.6969 = 0.3031 NM. Alter from the composite 191.5°T water track to 168.5°T . Time is 0.3031 / 4.899 × 60 = 3.7 0.3031/4.899 \times 60=3.7 0.3031/4.899 × 60 = 3.7 minutes, giving a total of about 3 hours 4 minutes .

Planning before departure: Iterate the trial duration using the tidal displacement over that entire interval. Check the intermediate positions as well as the final endpoint. If the fourth-hour tide differs from this exercise assumption, recalculate both the final course and ETA.

Comparison Table & Skippering Decision Rules

Operational Factor Stepped Hourly CTS Composite Multi-Hour CTS

Cross-Track Error (XTE) On the line under the example assumptions; monitor actual position +2.0 NM East at Hr 2 in this example

Progress After 3 Hours (15.0 NM Run) 14.00 NM South (1.00 NM short) 14.70 NM South (0.30 NM short)

Time to Complete 15.0 NM under the stated Hour 4 assumption About 3 hr 12 min; steer 168.5°T for the final step About 3 hr 04 min; alter to 168.5°T for the final step

Narrow Channels & Shoals Plan safe clearances and monitor frequently Use only if every intermediate position has safe clearance

Open Ocean Passages Excessive course changes Recommended (steady helm, reduced fatigue)

TSS Crossings (Rule 10) Maintain the required crossing heading; allow for ground drift A composite result cannot override the required crossing heading

Workload on Navigator Higher (hourly vector construction) Lower (one plot for whole passage)

Loading diagram... Stepped vs Composite Multi-Hour Course to Steer