Study guide
3.1 Course to Steer (CTS) Single-Hour Vector Triangles
RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Magnetic Compass, Variation & Deviation
1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
2 Chapter 2: Dead Reckoning, Estimated Position & Leeway
2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream
3 Chapter 3: Course to Steer, Vector Triangles & Position Lines
3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids
4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations
4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths
5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters
5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects
6 Chapter 6: IRPCS Steering & Sailing Rules
6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)
7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals
7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)
8 Chapter 8: The IALA Maritime Buoyage System
8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks
9 Chapter 9: Meteorology, Synoptic Systems & Depressions
9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs
10 Chapter 10: Local Coastal Weather, Fog & Forecasts
10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation
11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V
11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances
12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications
12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery
3.1 Course to Steer (CTS) Single-Hour Vector Triangles
Key Takeaways Explain This Topic AI
A Course to Steer (CTS) vector triangle resolves three distinct vectors: Ground Track (desired path over ground, 2 arrows), Tidal Stream (set and drift, 3 arrows), and Water Track (direction and speed through water, 1 arrow).
The tidal vector is always laid off from the departure waypoint (Point A to Point C), after which the boat's speed through the water is swung as an arc from Point C to intersect the ground track line at Point D.
Wind leeway must be countered by steering into the wind before applying magnetic variation and compass deviation: True Water Track ± Leeway = True Heading.
To convert True Heading to Compass Course to Steer, apply the CADET rule: Compass to True Add East / Subtract West, reversed when converting True to Compass (Add West, Subtract East).
The length of the ground track segment AD represents the Speed Over Ground (SOG) achieved during that single hour, which determines the vessel's accurate Estimated Time of Arrival (ETA).
Last updated: November 2026
3.1 Course to Steer (CTS) Single-Hour Vector Triangles
Note
Core Principle: A Course to Steer (CTS) determines the compass heading the helmsman must steer so that tidal stream and wind leeway carry the yacht along the intended ground track to the destination. An EP estimates position from known heading and movement data; a CTS instead solves the heading needed for a desired track.
Navigating across tidal waters requires reconciling two independent frames of reference: water moving over the seabed (tidal stream) and the vessel moving through the water (propulsion). Aiming the bow directly at a distant waypoint ignores tidal drift, causing the yacht to trace a curved, inefficient path over the seabed. The single-hour Course to Steer vector triangle provides the geometric solution to maintain a straight ground track.
Vector Conventions and Notation
Admiralty chartwork standards enforce distinct arrow notation for the triangle of velocities:
Ground Track (Track to Make Good): Marked with two arrowheads ( >> ). The planned path over the seabed from departure Waypoint A toward destination Waypoint B. Its speed is the Speed Over Ground (SOG) .
Tidal Stream Vector: Marked with three arrowheads ( >>> ). The horizontal movement of water. Its direction is the Set (°True) and its magnitude is the Drift (hourly rate in knots).
Water Track (Course Through Water): Marked with one arrowhead ( > ). The vessel's direction of travel and Speed Through Water (STW) , directed from the tidal-vector tip to intersect the ground track. Allowing for leeway converts this direction into the bow heading.
Water Track (1 arrow) + Tidal Stream (3 arrows) = Ground Track (2 arrows) \text{Water Track (1 arrow)} + \text{Tidal Stream (3 arrows)} = \text{Ground Track (2 arrows)} Water Track (1 arrow) + Tidal Stream (3 arrows) = Ground Track (2 arrows)
Step-by-Step Vector Triangle Construction
To construct a 1-hour Course to Steer vector triangle on a nautical chart, execute five standardized steps:
Step 1: Draw the Ground Track
Plot departure Point A and destination Point B. Draw a straight line connecting them, measure its True direction, and mark it with two arrowheads pointing toward Point B.
Step 2: Lay Off the Tidal Stream Vector from Departure
From the tidal diamond or atlas for the passage hour, find the Set (°True) and Drift (knots). From Point A, draw a line in the direction of the Set, measuring 1 hour of tidal drift (e.g., 2.4 NM for 2.4 knots). Label the end Point C and mark with three arrowheads pointing from A to C.
Important
For this CTS construction, lay the tidal stream vector off from the departure point (Point A). An EP instead adds known water-track and tidal displacements to a known starting position; drawing tide from the destination does not itself create an EP.
Step 3: Swing the Boat Speed Arc
Set dividers to 1 hour of planned Speed Through Water (STW) on the latitude scale (e.g., 6.0 NM). Place the compass point at Point C (tide tip) and swing an arc intersecting the Ground Track at Point D .
Step 4: Draw the Water Track
Draw a straight line from Point C to Point D. Mark it with one arrowhead pointing from C to D. The direction of line CD is the True Water Track .
Step 5: Measure Speed Over Ground (SOG)
Measure the distance along the ground track from Point A to Point D. Distance AD equals Speed Over Ground (SOG) in knots. Dividing total distance AB by this SOG yields the Estimated Time of Arrival (ETA).
Applying Wind Leeway Allowance
Leeway is downwind drift caused by wind pressure against the hull, sails, and topsides. To prevent leeway from pushing the yacht off the water track, the helmsman must steer into the wind:
Wind on Port Side (Port Tack): Wind pushes the yacht to starboard. Steer upwind to port by subtracting leeway: True Heading = Water Track − Leeway \text{True Heading} = \text{Water Track} - \text{Leeway} True Heading = Water Track − Leeway .
Wind on Starboard Side (Starboard Tack): Wind pushes the yacht to port. Steer upwind to starboard by adding leeway: True Heading = Water Track + Leeway \text{True Heading} = \text{Water Track} + \text{Leeway} True Heading = Water Track + Leeway .
Leeway depends on the vessel, wind and sea conditions. Use an appropriate estimate for the exercise or vessel, then check the resulting ground track underway.
Converting True Course to Compass Course (CADET)
Convert True Heading to the steering compass heading by correcting for Magnetic Variation and Compass Deviation :
True (T) ⟷ Variation ⟷ Magnetic (M) ⟷ Deviation ⟷ Compass (C) \text{True (T)} \longleftrightarrow \text{Variation} \longleftrightarrow \text{Magnetic (M)} \longleftrightarrow \text{Deviation} \longleftrightarrow \text{Compass (C)} True (T) ⟷ Variation ⟷ Magnetic (M) ⟷ Deviation ⟷ Compass (C)
Compass to True: Add East, Subtract West ( CADET : Compass to True, Add East ).
True to Compass (Reversed): Add West, Subtract East .
Remember: "Variation West, Magnetic Best; Variation East, Magnetic Least."
- Step Conversion Rule Applied
- 1. True to Magnetic True ± Variation \text{True} \pm \text{Variation} True ± Variation Add West, Subtract East
2. Magnetic to Compass Magnetic ± Deviation \text{Magnetic} \pm \text{Deviation} Magnetic ± Deviation Add West, Subtract East (from Deviation Card)
- Worked Numerical Example
- Scenario Data
- Departure (A): Alpha Buoy (50°30.0'N, 001°40.0'W)
- Destination (B): Bravo Fairway Buoy (090° True, Distance 12.0 NM)
- Yacht STW: 6.0 knots
- Tidal Stream: Assume set 140°T at 2.4 knots remains constant for the entire passage, beginning at 1000 UT
- Wind: Northerly (from 000°), causing 5° leeway
- Variation: 2° West (charted)
- Deviation Card: On heading 069°(M), Deviation is 3° East
- Solution Steps
Ground Track: Draw line 090°(T) from A toward B (2 arrows).
Tide Vector (AC): From A, lay off 2.4 NM on bearing 140°(T) to Point C (3 arrows).
Boat Speed Arc: From C, swing 6.0 NM arc across the 090° track to intersect at Point D.
Water Track (CD): Direction from C toward D measures 072°(T) (1 arrow).
Determine SOG: Distance AD measures 7.25 NM , giving SOG = 7.25 knots . ETA = 12.0 NM 7.25 knots = 1.655 hr ≈ 1 hr 39 min \text{ETA} = \frac{12.0\text{ NM}}{7.25\text{ knots}} = 1.655\text{ hr} \approx 1\text{ hr } 39\text{ min} ETA = 7.25 knots 12.0 NM = 1.655 hr ≈ 1 hr 39 min
Apply Leeway: Wind from 000° strikes port side. Steer 5° into wind (to port): True Heading = 072 ∘ (T) − 5 ∘ = 067 ∘ (T) \text{True Heading} = 072^\circ\text{(T)} - 5^\circ = 067^\circ\text{(T)} True Heading = 07 2 ∘ (T) − 5 ∘ = 06 7 ∘ (T)
Apply Variation: Variation is 2° West (Add West): Magnetic Heading = 067 ∘ (T) + 2 ∘ W = 069 ∘ (M) \text{Magnetic Heading} = 067^\circ\text{(T)} + 2^\circ\text{W} = 069^\circ\text{(M)} Magnetic Heading = 06 7 ∘ (T) + 2 ∘ W = 06 9 ∘ (M)
Apply Deviation: Deviation on 069°(M) is 3° East (Subtract East): Compass Course to Steer (CTS) = 069 ∘ (M) − 3 ∘ E = 066 ∘ (C) \text{Compass Course to Steer (CTS)} = 069^\circ\text{(M)} - 3^\circ\text{E} = 066^\circ\text{(C)} Compass Course to Steer (CTS) = 06 9 ∘ (M) − 3 ∘ E = 06 6 ∘ (C)