Study guide

2.1 Dead Reckoning (DR) & Water Track Principles

RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Magnetic Compass, Variation & Deviation

1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales

2 Chapter 2: Dead Reckoning, Estimated Position & Leeway

2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream

3 Chapter 3: Course to Steer, Vector Triangles & Position Lines

3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids

4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations

4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths

5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters

5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects

6 Chapter 6: IRPCS Steering & Sailing Rules

6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)

7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals

7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)

8 Chapter 8: The IALA Maritime Buoyage System

8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks

9 Chapter 9: Meteorology, Synoptic Systems & Depressions

9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs

10 Chapter 10: Local Coastal Weather, Fog & Forecasts

10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation

11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V

11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances

12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications

12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery

2.1 Dead Reckoning (DR) & Water Track Principles

Key Takeaways Explain This Topic AI

Dead Reckoning (DR) is the projected position of a vessel derived solely from the true course steered through the water and distance run by log from a known starting fix, completely ignoring leeway and tidal streams.

Speed Through the Water (STW) from a log differs from GNSS Speed Over Ground (SOG). Plot DR using log distance along the true heading steered; allow for leeway and tide when deriving an EP.

The distance run calculation is Distance (NM) = Speed (kt) × ( Time (min) / 60 ) \text{Distance (NM)} = \text{Speed (kt)} \times (\text{Time (min)} / 60) Distance (NM) = Speed (kt) × ( Time (min) /60 ) ; the 6-minute rule allows rapid mental calculation where distance in nautical miles equals speed divided by 10.

Standard RYA chartwork conventions require the water track to be annotated with a single arrowhead (>), with the true course written above the line and log distance or speed written below.

On nautical charts, distances must always be measured using the latitude scale at the same mean latitude as the track, never the longitude scale.

Last updated: November 2026

2.1 Dead Reckoning (DR) & Water Track Principles

Note

Dead Reckoning (DR) is the foundational baseline of maritime position projection. In Coastal Skipper and Yachtmaster navigation, a DR establishes where a vessel would be located through the water before external environmental forces—wind leeway and tidal streams—are factored in.

1. Definition and Principles of Dead Reckoning

Dead Reckoning is the technique of determining a vessel's projected position by advancing a known, verified prior position (a Fix) using strictly:

The True Course Steered through the water (compass heading corrected for deviation and variation), and

The Distance Run measured by the ship's log (or speed through the water multiplied by elapsed time).

The defining attribute of a Dead Reckoning position is that it deliberately ignores environmental displacements:

DR ignores wind leeway : It assumes the hull travels strictly along its fore-and-aft centerline.

DR ignores tidal stream and current : It assumes the surrounding body of water is completely stationary over the seabed.

Because coastal waters are rarely motionless and surface vessels continuously experience wind force, a DR position represents an idealized position through the water medium rather than a definitive geographic spot on Earth. A DR is a useful baseline; an Estimated Position (EP) also allows for leeway and tidal stream over the same interval.

2. Water Track vs. Ground Track: STW vs. SOG

Navigators must maintain a strict distinction between movement through the water and movement over the seabed:

Parameter Navigational Vector Primary Instrument Reference Frame

Speed Through the Water (STW) Water Track Paddlewheel, ultrasonic, or electromagnetic log Surrounding water body

Speed Over Ground (SOG) Ground Track GNSS (GPS) receiver Earth's surface (geodetic datum)

Speed Through the Water (STW) : Measures the velocity of the hull relative to the immediate water flow. STW governs rudder authority, keel lift, and vessel handling.

Speed Over Ground (SOG) : Measures actual geographic speed over the seabed.

For instance, a yacht motoring at 6.0 kt 6.0\text{ kt} 6.0 kt STW directly against a 2.0 kt 2.0\text{ kt} 2.0 kt tidal stream achieves an SOG of only 4.0 kt 4.0\text{ kt} 4.0 kt . Conversely, with the same stream astern, STW remains 6.0 kt 6.0\text{ kt} 6.0 kt while SOG increases to 8.0 kt 8.0\text{ kt} 8.0 kt . Plot DR using log distance along the true heading steered , before allowing for leeway or tide. A leeway-corrected water track is used in constructing an EP; do not substitute SOG for log speed.

3. Marine Log Mechanics, Errors, and Calibration

Marine speed logs are subject to fouling, boundary layer turbulence, and heel effects:

Fouling : Marine growth on paddlewheel impellers creates friction, causing logs to under-read.

Heel Angle : Flow dynamics change as the hull heels, often introducing asymmetric errors between tacks.

Boundary Layer : Water friction along the hull skin can distort sensor readings at varying speeds.

Calibrate the log using its manufacturer's procedure. For a simple measured-distance check, choose calm water with negligible current, maintain steady speed, and compare the known distance with the log distance. Under those conditions:

Log Factor = Actual Surveyed Distance Recorded Log Distance \text{Log Factor} = \frac{\text{Actual Surveyed Distance}}{\text{Recorded Log Distance}} Log Factor = Recorded Log Distance Actual Surveyed Distance ​

Corrected Distance = Recorded Log Distance × Log Factor \text{Corrected Distance} = \text{Recorded Log Distance} \times \text{Log Factor} Corrected Distance = Recorded Log Distance × Log Factor

4. Distance Calculations & Mental Arithmetic

The distance run along the water track is calculated using:

Distance (NM) = Speed (knots) × Time (minutes) 60 \text{Distance (NM)} = \text{Speed (knots)} \times \frac{\text{Time (minutes)}}{60} Distance (NM) = Speed (knots) × 60 Time (minutes) ​

The 6-Minute Rule

Because 6 minutes equals 1 10 \frac{1}{10} 10 1 ​ of an hour ( 0.1 hr 0.1\text{ hr} 0.1 hr ): Distance in 6 minutes (NM) = Speed in knots 10 \text{Distance in 6 minutes (NM)} = \frac{\text{Speed in knots}}{10} Distance in 6 minutes (NM) = 10 Speed in knots ​ At 6.8 kt 6.8\text{ kt} 6.8 kt , a yacht travels 0.68 NM 0.68\text{ NM} 0.68 NM every 6 minutes. Over 18 minutes ( 3 × 6 min 3 \times 6\text{ min} 3 × 6 min ), distance run equals 3 × 0.68 = 2.04 NM 3 \times 0.68 = 2.04\text{ NM} 3 × 0.68 = 2.04 NM .

5. Standard RYA Chartwork Conventions for DR

To ensure universal clarity on nautical charts, RYA standards specify:

Track Line : Drawn as a clean pencil line from the starting fix along the True Course Steered.

Keep the Vectors Distinct : The DR course line follows the true heading. A separate leeway-corrected Water Track is marked with one arrowhead ( > > > ).

Course Notation : The three-digit True Course is written above the line (e.g., 249°T ).

Distance and Speed : Distance run and STW are written below the line (e.g., 9.6M / 6.4kn ).

DR Symbol : Placed at the terminus as a small cross ( + + + ) or a tick drawn perpendicular across the track line, annotated with the four-digit time (e.g., 0930 DR ).

Warning

On Mercator charts, distance must always be measured on the latitude scale directly abreast of the track line ( 1 ′ of latitude = 1 NM 1' \text{ of latitude} = 1\text{ NM} 1 ′ of latitude = 1 NM ). Never measure distance on the longitude scale.

6. Comparison: DR vs. Estimated Position (EP) vs. Fix

  • Feature Dead Reckoning (DR) Estimated Position (EP) Position Fix (Fix)
  • Definition Projected run through the water Vector sum of water track and tide Observed position on Earth

Inputs Course steered, log speed, time Course, leeway, log run, tidal set & drift 2–3 visual bearings, radar, or GNSS

Wind & Tide Completely ignored Both wind leeway and tide incorporated Automatically inherent

Chart Symbol Cross ( + + + ) or perpendicular line Triangle with central dot ( △ \triangle △ ) Circle with dot ( ⊙ \odot ⊙ )

  • Arrows Course line before allowing for leeway 1 arrow (water), 3 (tide), 2 (ground) None on bearings
  • Reliability Baseline only; drifts over time Best dead reckoning calculation High definitive accuracy
  • 7. Worked Navigational Scenario

Scenario : At 0800, a vessel departs a fix 2.0 NM 2.0\text{ NM} 2.0 NM South of St Catherine's Point ( 50 ∘ 34.5 ′ N , 001 ∘ 17.8 ′ W 50^\circ 34.5'\text{N}, 001^\circ 17.8'\text{W} 5 0 ∘ 34. 5 ′ N , 00 1 ∘ 17. 8 ′ W ). Compass course steered is 254 ∘ C 254^\circ\text{C} 25 4 ∘ C . Deviation is 3 ∘ W 3^\circ\text{W} 3 ∘ W , and local Variation is 2 ∘ W 2^\circ\text{W} 2 ∘ W . The log reads 14.0 NM 14.0\text{ NM} 14.0 NM at 0800, and 23.6 NM 23.6\text{ NM} 23.6 NM at 0930. Plot the 0930 DR.

Solution :

Distance and Speed :

Elapsed time: 0800 to 0930 = 1.5 hours 1.5\text{ hours} 1.5 hours .

Distance run: 23.6 NM − 14.0 NM = 9.6 NM 23.6\text{ NM} - 14.0\text{ NM} = 9.6\text{ NM} 23.6 NM − 14.0 NM = 9.6 NM .

STW: 9.6 NM / 1.5 hr = 6.4 kt 9.6\text{ NM} / 1.5\text{ hr} = 6.4\text{ kt} 9.6 NM /1.5 hr = 6.4 kt .

Course Conversion :

Magnetic Course: 254 ∘ C − 3 ∘ W (Dev) = 251 ∘ M 254^\circ\text{C} - 3^\circ\text{W (Dev)} = 251^\circ\text{M} 25 4 ∘ C − 3 ∘ W (Dev) = 25 1 ∘ M .

True Course: 251 ∘ M − 2 ∘ W (Var) = 249 ∘ T 251^\circ\text{M} - 2^\circ\text{W (Var)} = 249^\circ\text{T} 25 1 ∘ M − 2 ∘ W (Var) = 24 9 ∘ T .

Plotting :

Draw the DR course line on 249 ∘ T 249^\circ\text{T} 24 9 ∘ T from the 0800 Fix, before applying any leeway.

Measure 9.6 NM 9.6\text{ NM} 9.6 NM on the latitude scale adjacent to 50 ∘ 30 ′ N 50^\circ 30'\text{N} 5 0 ∘ 3 0 ′ N .

Mark a tick at 9.6 NM 9.6\text{ NM} 9.6 NM , labeled 0930 DR .

Write 249°T above the track and 9.6M / 6.4kn below.