Study guide
2.2 Wind Leeway & Calculating Water Track
RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Magnetic Compass, Variation & Deviation
1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
2 Chapter 2: Dead Reckoning, Estimated Position & Leeway
2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream
3 Chapter 3: Course to Steer, Vector Triangles & Position Lines
3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids
4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations
4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths
5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters
5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects
6 Chapter 6: IRPCS Steering & Sailing Rules
6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)
7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals
7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)
8 Chapter 8: The IALA Maritime Buoyage System
8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks
9 Chapter 9: Meteorology, Synoptic Systems & Depressions
9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs
10 Chapter 10: Local Coastal Weather, Fog & Forecasts
10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation
11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V
11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances
12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications
12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery
2.2 Wind Leeway & Calculating Water Track
Key Takeaways Explain This Topic AI
Leeway is the lateral drift of a vessel caused by wind pressure against its hull, topsides, and rig, pushing the vessel sideways through the water medium.
The angle of leeway is usually greatest when sailing close-hauled and decreases towards a dead run; use an estimate appropriate to the particular yacht and conditions as aerodynamic forces align with the vessel's centerline.
Hydrodynamic keel lift scales with the square of boat speed ( L ∝ V 2 L \propto V^2 L ∝ V 2 ); a yacht sailing fast generates superior lateral resistance and suffers far less leeway than a yacht moving slowly.
Wind on the port side pushes the vessel to starboard, requiring the leeway angle to be added to the true heading ( W T = T H + Leeway WT = TH + \text{Leeway} W T = T H + Leeway ); wind on the starboard side pushes the vessel to port, requiring leeway to be subtracted ( W T = T H − Leeway WT = TH - \text{Leeway} W T = T H − Leeway ).
Leeway is applied strictly to the True Heading after correcting for deviation and variation to establish the True Water Track; it is never applied to raw compass readings.
Last updated: November 2026
2.2 Wind Leeway & Calculating Water Track
Note
Whenever wind acts on a vessel, aerodynamic pressure on the sails, hull topsides, and rigging creates lateral force. This forces the hull to slide sideways through the water as it moves forward. In coastal navigation, resolving this sideways drift is essential to convert a vessel's heading into its true Water Track .
1. Aerodynamic and Hydrodynamic Principles of Leeway
Leeway is the angular displacement between the heading of the vessel (the direction the bow points along its fore-and-aft centerline) and the actual path the hull tracks through the water body (the Water Track ).
For a symmetrical underwater foil (such as a fin keel or skeg) to produce hydrodynamic lift to counteract lateral wind force, water must flow across the foil at an angle of attack . This angle of attack is precisely the leeway angle ( λ \lambda λ ). Without slipping slightly sideways through the water, a symmetrical keel produces zero lift. Consequently, every vessel sailing or motoring across the wind experiences leeway. Wind Direction ────►
- \
- \ Heading (Centerline)
- \ ▲
- \ │ \ Leeway Angle (λ)
- \ │ ▼
- \ │ / Water Track
- │ /
- [Hull]
- 2. Factors Determining Leeway Magnitude
Leeway varies with the yacht and conditions. Assess these factors rather than selecting an angle from a universal allowance table:
1. Point of Sail (Angle of Wind to Vessel)
Close-Hauled: Strong sideways sail force and reduced speed in head seas can produce substantial leeway.
Reaching: The balance of sideways force, speed and keel resistance changes as the wind moves aft.
Dead Run: With the wind directly astern, little sideways wind force remains. A broad reach still has a sideways component.
2. Speed Through the Water (STW)
Keel hydrodynamic lift is proportional to the square of boat speed ( Lift ∝ V 2 \text{Lift} \propto V^2 Lift ∝ V 2 ). If vessel speed drops by half, the keel generates only one-quarter the lateral lift for the same angle of attack. To generate sufficient resistance against wind pressure, the hull must slide sideways at a much larger angle. A yacht powering through chop at 6.5 kt 6.5\text{ kt} 6.5 kt may experience only 4 ∘ 4^\circ 4 ∘ leeway, whereas the same boat pinching at 2.5 kt 2.5\text{ kt} 2.5 kt may suffer 15 ∘ 15^\circ 1 5 ∘ or more.
3. Hull and Keel Profile
Deep Fin Keels: Efficient underwater foils generally resist sideways motion well when the yacht has adequate speed.
Long, Bilge or Shallow Keels: Underwater shape and draught affect resistance; the actual allowance must be established for the boat.
High-Windage Motor Cruisers: Large topsides and little underwater lateral area can cause substantial sideways drift, particularly at low speed.
4. Wind Strength and Sea State
Aerodynamic force increases with the square of wind velocity. Steep head seas striking the windward bow repeatedly knock the vessel to leeward, further compounding slip.
3. Choosing a Leeway Allowance
- Factor Practical assessment
- Point of sail Expect more leeway when beating than when running directly downwind
- Boat speed Reduced water flow over the keel can increase the angle needed to resist sideways force
- Hull, keel and windage Use observations or calibrated information for this particular boat
- Wind and sea state Reassess after a change in wind, heel, sail trim or wave conditions
- Chartwork exercise Use the supplied angle and wind direction, then check the resulting water track
Record observations in different conditions to improve the yacht's estimated allowance. Treat the result as an estimate and verify the actual track and clearance underway.
4. Determining the Direction of Leeway: Port vs. Starboard Wind
Wind displaces a vessel downwind toward leeward. The algebraic sign applied to True Heading depends on which side of the boat the wind strikes:
Wind on Port Side (Port Tack)
Wind blowing on the port side pushes the vessel to starboard (clockwise):
Rule : ADD Leeway to True Heading. Water Track (True) = True Heading + Leeway Angle \text{Water Track (True)} = \text{True Heading} + \text{Leeway Angle} Water Track (True) = True Heading + Leeway Angle
Wind on Starboard Side (Starboard Tack)
Wind blowing on the starboard side pushes the vessel to port (counter-clockwise):
Rule : SUBTRACT Leeway from True Heading. Water Track (True) = True Heading − Leeway Angle \text{Water Track (True)} = \text{True Heading} - \text{Leeway Angle} Water Track (True) = True Heading − Leeway Angle
Tip
Always sketch a small diagram in the chart margin: draw the vessel heading vector, draw the wind arrow striking the hull, and observe which way the vessel is blown. If blown clockwise, add; if counter-clockwise, subtract.
5. Navigational Conversion Hierarchy
Leeway must only be applied to True Heading . Never apply leeway to compass or magnetic headings before correcting for deviation and variation:
Compass Course (CC) → ± Dev Magnetic Course (MC) → ± Var True Heading (TH) → ± Leeway True Water Track (WT) \text{Compass Course (CC)} \xrightarrow{\pm \text{ Dev}} \text{Magnetic Course (MC)} \xrightarrow{\pm \text{ Var}} \text{True Heading (TH)} \xrightarrow{\pm \text{ Leeway}} \text{True Water Track (WT)} Compass Course (CC) ± Dev Magnetic Course (MC) ± Var True Heading (TH) ± Leeway True Water Track (WT)
Navigators can directly verify leeway underway by sighting the vessel's wake with a hand-bearing compass. The angular difference between the wake trailing toward the windward quarter and the reciprocal heading ( 180 ∘ + Heading 180^\circ + \text{Heading} 18 0 ∘ + Heading ) equals the real-time leeway angle.
- 6. Worked Navigational Examples
- Example 1: Wind on Port Bow (Port Tack)
Heading : 068 ∘ C 068^\circ\text{C} 06 8 ∘ C , Deviation 2 ∘ E 2^\circ\text{E} 2 ∘ E , Variation 3 ∘ W 3^\circ\text{W} 3 ∘ W .
Wind : North-Northwest ( 340 ∘ 340^\circ 34 0 ∘ ), blowing on port bow. Estimated leeway: 8 ∘ 8^\circ 8 ∘ .
MC = 068 ∘ + 2 ∘ E = 070 ∘ M \text{MC} = 068^\circ + 2^\circ\text{E} = 070^\circ\text{M} MC = 06 8 ∘ + 2 ∘ E = 07 0 ∘ M .
TH = 070 ∘ − 3 ∘ W = 067 ∘ T \text{TH} = 070^\circ - 3^\circ\text{W} = 067^\circ\text{T} TH = 07 0 ∘ − 3 ∘ W = 06 7 ∘ T .
Wind on port pushes boat to starboard (clockwise → \rightarrow → add): Water Track = 067 ∘ T + 8 ∘ = 075 ∘ T \text{Water Track} = 067^\circ\text{T} + 8^\circ = 075^\circ\text{T} Water Track = 06 7 ∘ T + 8 ∘ = 07 5 ∘ T
Example 2: Wind on Starboard Beam (Starboard Tack)
Heading : 215 ∘ C 215^\circ\text{C} 21 5 ∘ C , Deviation 4 ∘ W 4^\circ\text{W} 4 ∘ W , Variation 1 ∘ W 1^\circ\text{W} 1 ∘ W .
Wind : From 300 ∘ T 300^\circ\text{T} 30 0 ∘ T , blowing on the starboard beam. Estimated leeway: 4 ∘ 4^\circ 4 ∘ .
MC = 215 ∘ − 4 ∘ W = 211 ∘ M \text{MC} = 215^\circ - 4^\circ\text{W} = 211^\circ\text{M} MC = 21 5 ∘ − 4 ∘ W = 21 1 ∘ M .
TH = 211 ∘ − 1 ∘ W = 210 ∘ T \text{TH} = 211^\circ - 1^\circ\text{W} = 210^\circ\text{T} TH = 21 1 ∘ − 1 ∘ W = 21 0 ∘ T .
Wind on starboard pushes boat to port (counter-clockwise → \rightarrow → subtract): Water Track = 210 ∘ T − 4 ∘ = 206 ∘ T \text{Water Track} = 210^\circ\text{T} - 4^\circ = 206^\circ\text{T} Water Track = 21 0 ∘ T − 4 ∘ = 20 6 ∘ T
7. Common Exam Traps in Leeway Calculations
Applying Leeway to Compass Heading : Because deviation varies with heading, applying leeway early produces erroneous deviation corrections.
Confusing Wind Origin with Direction : A "Southwest wind" blows from 225 ∘ 225^\circ 22 5 ∘ . If heading 135 ∘ 135^\circ 13 5 ∘ , the wind blows onto your starboard beam, requiring subtraction.
Double Counting on Fixes : A position fix already reflects actual displacement. Allow for leeway when constructing an estimated position or finding a course to steer; do not add it to an observed fix or to the uncorrected DR plot.