Study guide
5.2 Using Admiralty Tidal Curves for Height at Any Time
RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Magnetic Compass, Variation & Deviation
1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
2 Chapter 2: Dead Reckoning, Estimated Position & Leeway
2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream
3 Chapter 3: Course to Steer, Vector Triangles & Position Lines
3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids
4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations
4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths
5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters
5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects
6 Chapter 6: IRPCS Steering & Sailing Rules
6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)
7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals
7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)
8 Chapter 8: The IALA Maritime Buoyage System
8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks
9 Chapter 9: Meteorology, Synoptic Systems & Depressions
9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs
10 Chapter 10: Local Coastal Weather, Fog & Forecasts
10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation
11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V
11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances
12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications
12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery
5.2 Using Admiralty Tidal Curves for Height at Any Time
Key Takeaways Explain This Topic AI
Admiralty Tidal Curves resolve non-sinusoidal shallow water distortions, estuarine friction, and asymmetric flood-ebb durations that invalidate the simplified Rule of Twelfths.
Read the actual curve’s height scales, spring/neap line styles and time reference. Many curves are HW-centred; some, including Cowes, are centred on LW. Join the predicted LW and HW heights on the transfer grid.
Problem 1 (forward calculation) finds the instantaneous height of tide at any specific clock time by projecting vertically from the time axis to the curve, horizontally to the diagonal line, and vertically to the height scale.
Problem 2 (reverse calculation) determines the safe passage time window over a shallow sill or drying bar by projecting from the required height to the diagonal, horizontally to both sides of the curve, and down to the time axis.
Required height of tide over a drying feature must always equal the charted drying height plus the vessel's static draught and a safe under-keel clearance margin.
Last updated: November 2026
5.2 Using Admiralty Tidal Curves for Height at Any Time
Note
Calculating High and Low Water only gives the turning points of the tide. Navigators frequently need the Height of Tide at an intermediate clock time (e.g., when anchoring) or the time window when depth exceeds a threshold (e.g., clearing a shallow sill or bar). Admiralty Tidal Curves provide the graphical method to solve both problems.
Limitations of the Rule of Twelfths
The Rule of Twelfths (1/12 in hour 1, 2/12 in hour 2, 3/12 in hour 3, 3/12 in hour 4, 2/12 in hour 5, 1/12 in hour 6) assumes a pure sinusoidal wave with equal 6-hour durations between HW and LW. In coastal navigation, this assumption frequently fails:
Estuarine Friction : Narrow approaches delay flood waves, creating rapid floods (e.g., 4 hours) and sluggish ebbs (e.g., 8 hours).
Shallow-Water Harmonics : In shallow waters (e.g., the English Channel and the Solent), interaction between primary frequencies generates overtides ( M 4 , M 6 M_4, M_6 M 4 , M 6 ), resulting in double high waters (Southampton) or extended stands (Weymouth, Saint-Malo).
Empirical Profiles : Official Admiralty curves represent tidal observations at the port, representing its characteristic local profile.
- Attribute Rule of Twelfths Admiralty Tidal Curves
- Wave Profile Assumes pure sinusoidal wave Reflects empirical coastal profile
- Flood / Ebb Duration Assumes equal 6-hour durations Accommodates asymmetrical durations
- Harmonics Ignores shallow-water harmonics Models double high waters and stands
- Curve Distinction Single theoretical rule Separate Mean Springs and Neaps curves
- Use Approximate check where the profile is suitable Published local method where available and applicable
- Anatomy of the Admiralty Tidal Curve
Read the layout and instructions on the actual port curve. The following describes a common HW-centred format:
High Water Height Scale (Top Axis) : Graduated in metres across the port's High Water range.
Low Water Height Scale (Bottom Axis) : Graduated in metres across the port's Low Water range.
The Diagonal Transfer Line : A straight pencil line drawn by the navigator directly connecting the plotted Low Water on the bottom scale to High Water on the top scale.
The Central Curve Box : Contains the empirical profile curves:
Mean Springs Curve : Heavy solid line (red or black).
Mean Neaps Curve : Dashed line (blue or black).
On intermediate tides, the navigator interpolates between the curves based on tidal range.
The Time Axis & Entry Boxes (Base Axis) : Use the printed reference event and hour labels. HW-centred curves use HW as zero; a curve such as Cowes uses LW. Fill the boxes from that event, without assuming identical limits on both sides.
Problem 1: Height of Tide at a Specific Clock Time
HW-centred exercise: A skipper needs the height of tide at1530BST to check depth before anchoring.
Step-by-Step Graphical Protocol
Extract Predictions : Obtain HW time (1300 BST, 5.2m) and LW time (1915 BST, 1.2m). For this hypothetical exercise, mean spring range is 4.0m and mean neap range 2.0m: the 4.0m range uses the spring curve. The supplied curve factor at HW +2h30m is 0.55.
Plot Heights : Mark LW (1.2m) on the bottom scale and HW (5.2m) on the top scale. Join them with a straight pencil line ( the diagonal line ).
Populate Time Boxes : Write HW time ( 1300 ) beneath the central 'HW' (0h) marker. Fill in adjacent hourly boxes:
Before HW: 1200 (-1h), 1100 (-2h), 1000 (-3h).
After HW: 1400 (+1h), 1500 (+2h), 1600 (+3h), 1700 (+4h).
Locate Target Time : Find 1530 on the base axis (+2.5h after HW, midway between 1500 and 1600).
Project to Curve : Project vertically straight UP from 1530 to intersect the Spring curve.
Transfer to Diagonal : From the curve intersection, travel horizontally across to intersect the diagonal line.
Read Height : Project vertically to the available height scale, following the printed layout. The supplied factor gives Height of Tide = 1.2 + (0.55 × 4.0) = 3.4 metres . A real calculation requires the actual port curve.
Problem 2: Safe Tidal Window for a Required Height
HW-centred exercise: Find the earliest and latest times when water level meets the stated drying-bar requirement.
Formulating Required Height of Tide
Required Depth = Vessel Static Draught + Under-Keel Clearance Margin (UKC) \text{Required Depth} = \text{Vessel Static Draught} + \text{Under-Keel Clearance Margin (UKC)} Required Depth = Vessel Static Draught + Under-Keel Clearance Margin (UKC) Required Height of Tide = Required Depth − Charted Depth \text{Required Height of Tide} = \text{Required Depth} - \text{Charted Depth} Required Height of Tide = Required Depth − Charted Depth
Important
For a drying bank or sill with an underlined charted drying height (e.g., 1.4 ‾ m \underline{1.4}\text{m} 1.4 m ), Charted Depth is negative ( − 1.4 m -1.4\text{m} − 1.4 m ). Subtracting a negative yields addition: Required Height of Tide = Vessel Draught + UKC Margin + Charted Drying Height \text{Required Height of Tide} = \text{Vessel Draught} + \text{UKC Margin} + \text{Charted Drying Height} Required Height of Tide = Vessel Draught + UKC Margin + Charted Drying Height
Worked Crossing Scenario
Vessel draught: 1.8 metres .
Prudent UKC margin: 0.8 metres .
Harbour entrance bar: Charted drying height of 1.4 metres (sounded as 1.4 ‾ m \underline{1.4}\text{m} 1.4 m ).
Required Height : 1.8 m + 0.8 m + 1.4 m = 4.0 metres 1.8\text{m} + 0.8\text{m} + 1.4\text{m} = \mathbf{4.0\text{ metres}} 1.8 m + 0.8 m + 1.4 m = 4.0 metres .
Port predictions: HW 1400 BST (5.0m); LW 2015 BST (1.0m). For this hypothetical exercise, mean spring range is 4.5m and mean neap range 2.5m, giving (4.0−2.5)/(4.5−2.5) = 0.75. The supplied interpolated curve crosses factor 0.75 at HW −1h50m and HW +1h50m.
Reverse Plotting Protocol
Plot Diagonal : Join LW (1.0m) on the bottom scale to HW (5.0m) on the top scale.
Enter Required Height : Locate 4.0 m 4.0\text{m} 4.0 m on the horizontal height scale.
Project to Diagonal : Project vertically from 4.0 m 4.0\text{m} 4.0 m to intersect the diagonal line.
Transfer Horizontally to Curves : Required factor = (4.0−1.0)/(5.0−1.0) = 0.75. Draw the corresponding horizontal line across the curve box. For the supplied exercise readings:
Flood intersection (before HW): occurs at -1h 50m before HW.
Ebb intersection (after HW): occurs at +1h 50m after HW.
Drop to Time Axis : Drop vertically down from both curve intersections to the time boxes:
HW time is 1400 BST .
Earliest Safe Arrival Time = 1400 − 0150 = 1210 BST 1400 - 0150 = \mathbf{1210\text{ BST}} 1400 − 0150 = 1210 BST .
Latest Safe Departure Time = 1400 + 0150 = 1550 BST 1400 + 0150 = \mathbf{1550\text{ BST}} 1400 + 0150 = 1550 BST .
Conclusion : Safe crossing window spans 3 hours 40 minutes (from 1210 to 1550 BST).
Asymmetric Curves & Tidal Stands
In regions such as the Solent, Portland, and the Channel Islands, skippers encounter specialized curve features:
Duration Corrections : When the time interval between LW and HW departs from 6 hours, some Admiralty curves provide auxiliary duration tables to scale the time axis.
Dual High Waters & Stands : In Southampton Water and Portsmouth, overtides produce a secondary rise or prolonged stand. A horizontal line across the curve may intersect at multiple points, providing extended deep-water transit windows.