Study guide
5.3 Tidal Diamonds, Stream Atlases & Tidal Gates
RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Magnetic Compass, Variation & Deviation
1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales
2 Chapter 2: Dead Reckoning, Estimated Position & Leeway
2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream
3 Chapter 3: Course to Steer, Vector Triangles & Position Lines
3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids
4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations
4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths
5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters
5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects
6 Chapter 6: IRPCS Steering & Sailing Rules
6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)
7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals
7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)
8 Chapter 8: The IALA Maritime Buoyage System
8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks
9 Chapter 9: Meteorology, Synoptic Systems & Depressions
9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs
10 Chapter 10: Local Coastal Weather, Fog & Forecasts
10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation
11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V
11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances
12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications
12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery
5.3 Tidal Diamonds, Stream Atlases & Tidal Gates
Key Takeaways Explain This Topic AI
Tidal heights represent vertical changes in water level above Chart Datum, whereas tidal streams represent the horizontal mass movement of water measured in knots and degrees True (°T).
High or low water does not by itself identify slack water. The relationship between tidal height and stream varies locally; use the published stream information for the particular channel.
Chart tidal diamonds tabulate hourly stream direction and spring/neap rates relative to High Water at a named Standard Port, requiring range-based linear interpolation between neap and spring values.
Admiralty Tidal Stream Atlases display 13 hourly charts depicting current vectors and comma-separated rates in tenths of a knot (e.g., '14,28' represents 1.4 knots at Neaps and 2.8 knots at Springs).
Tidal gates are critical passages where strong streams can restrict progress or worsen the sea state; plan the approach backwards from a suitable transit window.
Last updated: November 2026
5.3 Tidal Diamonds, Stream Atlases & Tidal Gates
Note
A coastal vessel is influenced by two simultaneous tidal forces: tidal heights (vertical changes governing depth and under-keel clearance) and tidal streams (horizontal water movement governing course-to-steer and ground track). Mastering chart tidal diamonds, stream atlases, and tidal gates is essential for safe passage planning.
Tidal Streams vs. Tidal Heights
High or low water does not by itself identify slack water. Ideal wave models illustrate why:
Progressive tidal wave: Maximum current occurs near high and low water, with slack near mid-tide.
Standing tidal wave: Slack occurs near high and low water, with maximum current near mid-tide.
Actual coastal waters: Reflections, friction and differences in level between connected basins produce more complex timing. Use the local tidal-stream table, atlas or predictions; do not assign a real channel one model and infer its safe transit time from height alone.
Streams are classified as rectilinear (oscillating back and forth along a 180° axis in channels) or rotary (turning continuously through 360° across 12 hours with no true slack water in open bays).
Reading Chart Tidal Diamonds
Admiralty charts depict tidal stream data via lettered purple diamonds (e.g., [A] , [B] ). The corresponding data is tabulated in the chart margin.
Tidal Diamond Table Architecture
Reference Standard Port : Explicitly names the reference port for all hourly rows (e.g., 'Tidal Streams referred to HW at DOVER' ).
Hourly Rows : 13 rows from 6 hours before High Water ( -6 h ) through High Water ( HW ) to 6 hours after High Water ( +6 h ).
Direction (°T) : The true direction toward which the stream sets (water movement direction).
Rates (Knots) : Velocity in knots at Springs (mean spring rate) and Neaps (mean neap rate).
Sample Chart Tidal Diamond Table: Diamond [B]
- Hours Relative to HW Direction (°True) Rates: Springs (knots) Rates: Neaps (knots)
- 6 h 085° 1.8 0.9
- 5 h 088° 2.6 1.3
- 4 h 092° 3.4 1.7
- 3 h 095° 3.8 1.9
- 2 h 098° 3.2 1.6
- 1 h 102° 1.6 0.8
- HW 265° 0.4 (weak, near reversal) 0.2
- +1 h 272° 2.1 1.0
- +2 h 276° 3.5 1.7
- +3 h 280° 4.0 2.0
- +4 h 282° 3.3 1.6
- +5 h 280° 2.2 1.1
- +6 h 082° 0.6 0.3
- Interpolating Tidal Stream Rates
Use the day’s range at the reference port with the published mean neap and spring ranges. These are averages, not absolute limits; follow the publication’s guidance outside them. The navigator interpolates the stream rate using the Range Factor :
Range Factor = Today’s Range − Neap Range Spring Range − Neap Range \text{Range Factor} = \frac{\text{Today's Range} - \text{Neap Range}}{\text{Spring Range} - \text{Neap Range}} Range Factor = Spring Range − Neap Range Today’s Range − Neap Range Predicted Rate = Neap Rate + [ Range Factor × ( Spring Rate − Neap Rate ) ] \text{Predicted Rate} = \text{Neap Rate} + \left[ \text{Range Factor} \times (\text{Spring Rate} - \text{Neap Rate}) \right] Predicted Rate = Neap Rate + [ Range Factor × ( Spring Rate − Neap Rate ) ]
Worked Interpolation Scenario
Exercise assumptions: Reference-port Mean Spring Range = 6.0m , Mean Neap Range = 3.2m ; these are supplied values, not current Dover predictions.
Today's Predicted Range = 5.3m .
At 2 hours before HW ( -2 h ), Diamond [B] states: Dir 098°T , Spring 3.2 kn , Neap 1.6 kn .
Calculation
Range Factor: 5.3 − 3.2 6.0 − 3.2 = 2.1 2.8 = 0.75 \frac{5.3 - 3.2}{6.0 - 3.2} = \frac{2.1}{2.8} = \mathbf{0.75} 6.0 − 3.2 5.3 − 3.2 = 2.8 2.1 = 0.75 (75% from Neaps to Springs).
Rate difference: 3.2 − 1.6 = 1.6 knots 3.2 - 1.6 = 1.6\text{ knots} 3.2 − 1.6 = 1.6 knots .
Interpolated Rate: 1.6 kn + ( 0.75 × 1.6 kn ) = 1.6 + 1.2 = 2.8 knots 1.6\text{ kn} + (0.75 \times 1.6\text{ kn}) = 1.6 + 1.2 = \mathbf{2.8\text{ knots}} 1.6 kn + ( 0.75 × 1.6 kn ) = 1.6 + 1.2 = 2.8 knots .
Resulting Vector : Stream sets 098°T at 2.8 knots .
Admiralty Tidal Stream Atlases (NP Series)
Admiralty Tidal Stream Atlases (e.g., NP209, NP218) provide regional geographic overviews of tidal flow across 13 synchronized hourly charts:
Flow Arrows : Indicate flow paths; length and thickness show relative velocity.
Comma-Separated Figures (Tenths of a Knot) : Each arrow displays two numbers without decimals:
First number: Rate at Mean Neaps in tenths of a knot.
Second number: Rate at Mean Springs in tenths of a knot.
Example : 14,28 denotes 1.4 knots at Neaps and 2.8 knots at Springs .
Example : 04,11 denotes 0.4 knots at Neaps and 1.1 knots at Springs .
Weak or Reversing Streams : Read the publication’s legend and hourly data. Do not infer slack from a universal symbol or from HW/LW height alone.
Observing the Stream at Marks
Check the predicted set against the water actually flowing past a fixed beacon or moored buoy, observed from a safe distance. The disturbed water/wake extends downstream. A boat moored at one end usually hangs downstream from its mooring, but wind can change its alignment; drifting objects are also affected by wind.
Record the time, position and observed direction. This checks the local surface flow , not a precise offshore rate: eddies and river flow may differ from the atlas prediction. Resolve an unexpected direction before relying on the planned stream allowance or tidal gate.
Source: Port of London Authority Tideway Code, “Ebb tide, flood tide and the tidal stream” . These observation principles do not import the Thames’s local navigation rules into a coastal passage.
Strategic Passage Planning Around 'Tidal Gates'
A Tidal Gate is a passage, strait or headland where tidal conditions make the timing of transit critical. Examples include Portland Bill, The Needles, Hurst Narrows and the Alderney Race.
Because cruising speeds of displacement yachts (5 to 8 knots) are comparable to stream rates, an adverse stream can leave little or no headway and may aggravate the sea state.
The Backwards Planning Principle
Important
Plan Backwards from the Gate :
Never set an arbitrary departure time and hope for fair tide at a headland. Instead:
Identify the clock window when the gate is favourable or slack.
Fix the Required Arrival Time at the gate.
Work backwards along the route, applying hourly tidal vectors, to establish the Mandatory Departure Time .
Chained Tidal Gates
When a passage crosses multiple tidal gates in sequence (e.g., The Needles, St Albans Head, and Portland Bill), skippers must verify whether ground speed allows carrying the fair tide through consecutive gates. If the distance exceeds 20 to 30 miles, a displacement yacht may catch fair tide at the first gate only to face foul tide at the second. The passage plan must include designated intermediate anchorages (e.g., Swanage or Weymouth) to await the next favorable cycle.