Study guide

4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings

RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Magnetic Compass, Variation & Deviation

1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales

2 Chapter 2: Dead Reckoning, Estimated Position & Leeway

2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream

3 Chapter 3: Course to Steer, Vector Triangles & Position Lines

3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids

4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations

4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths

5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters

5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects

6 Chapter 6: IRPCS Steering & Sailing Rules

6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)

7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals

7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)

8 Chapter 8: The IALA Maritime Buoyage System

8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks

9 Chapter 9: Meteorology, Synoptic Systems & Depressions

9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs

10 Chapter 10: Local Coastal Weather, Fog & Forecasts

10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation

11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V

11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances

12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications

12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery

4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings

Key Takeaways Explain This Topic AI

On UK tidal charts, Chart Datum is normally approximately Lowest Astronomical Tide (LAT), the lowest predicted level under average weather and any astronomical conditions. Check the datum stated on the chart.

Charted depths are survey depths measured downwards from Chart Datum. Add the height of tide and allow for survey uncertainty, seabed change and weather before deciding clearance.

Drying heights represent intertidal features (sandbanks, rocks, reefs) that uncover as the water falls; charted as underlined figures in green areas, they are measured upwards from Chart Datum.

Total water depth is calculated as Charted Depth + Height of Tide over soundings, or Height of Tide - Drying Height over drying banks.

Overhead clearances beneath bridges, cables, and barriers are heights above Highest Astronomical Tide (HAT) or Mean High Water Springs (MHWS); safe clearance increases as the tide falls.

Last updated: November 2026

4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings

Note

Core Principle: Nautical charts partition vertical space into two distinct domains: water depths below the surface and air draught clearances above it. Admiralty charts reference soundings and drying heights to the Chart Datum (CD) stated on the chart. In UK tidal waters it is normally approximately Lowest Astronomical Tide (LAT) . Check the stated high-water datum for overhead clearances, commonly Highest Astronomical Tide (HAT) .

Navigators must master vertical reference planes, understand how soundings and drying heights are measured, and execute accurate depth and clearance calculations.

Chart Datum (CD) & Lowest Astronomical Tide (LAT)

Chart Datum (CD) is the zero reference level from which charted depths (soundings) and drying heights are measured.

UK tidal charts normally use a datum approximately at Lowest Astronomical Tide (LAT) . IHO recommends LAT or a closely equivalent level in oceanic tidal areas, while permitting other national datums; mean sea level or a similar level is used where tides are negligible. Always read the chart's datum note and use matching tidal heights.

Definition & Astronomical Basis of LAT

Lowest Astronomical Tide (LAT): The lowest water level that can be predicted to occur under average meteorological conditions and under any combination of astronomical conditions.

LAT is computed using harmonic analysis across the full 18.6-year nodal regression cycle , during which the Moon's ascending node regresses through 360° and lunar declination cycles between 18.5° and 28.5°. Computing LAT over this complete astronomical cycle ensures that astronomical tides rarely drop below Chart Datum under standard weather.

Meteorological Deviations Below Chart Datum

LAT assumes average meteorological conditions for the place concerned:

Inverted Barometer Effect: As a rough estimate, a 1 hPa pressure change corresponds to an opposite sea-level change of about 1 cm . Relative to an illustrative average of 1013 hPa, 970 hPa gives about +0.43m and 1035 hPa about -0.22m; actual response also depends on wind and local conditions.

Wind Stress & Storm Surge: Strong offshore gales blow surface water out of shallow bays and estuaries.

Warning

When anticyclonic high pressure coincides with fierce offshore winds during spring tides, water levels can fall below Chart Datum (LAT) . Never navigate with zero under-keel clearance relying blindly on charted soundings.

Charted Depths (Soundings)

Soundings are depth figures printed across navigable waters on nautical charts:

Normally displayed in black sloping figures on white water (deep offshore areas) and pale blue water (shallow contours).

Measured vertically downwards from Chart Datum to the seabed.

A sounding of 5.2 records a surveyed depth of 5.2 metres below the stated Chart Datum. Actual clearance depends on water level, survey reliability and any seabed change.

Calculating Total Water Depth over Soundings

At any given moment, the sea surface rises above Chart Datum by the Height of Tide (HoT) :

Total Water Depth = Charted Depth + Height of Tide \text{Total Water Depth} = \text{Charted Depth} + \text{Height of Tide} Total Water Depth = Charted Depth + Height of Tide

Example Calculation:

Charted Sounding: 3.4m; Predicted Height of Tide (HoT): 2.8m.

Total Water Depth = 3.4 m + 2.8 m = 6.2 m \text{Total Water Depth} = 3.4\text{m} + 2.8\text{m} = \mathbf{6.2\text{m}} Total Water Depth = 3.4 m + 2.8 m = 6.2 m .

Drying Heights (The Intertidal Zone)

The intertidal zone consists of sandbanks, mudflats, and rocky ledges that are covered at high water but uncover (dry out) at low water.

On Admiralty charts, drying areas are rendered in a green tint . The figures printed on these drying features are Drying Heights :

Distinguished from soundings by being underlined on the chart , such as an underlined 1.4 or 0.6.

Measured vertically upwards from Chart Datum to the top of the seabed or rock.

A drying height of 1.4m (charted as an underlined 1.4) means the seabed rises 1.4 metres above Chart Datum. When the tide falls to Chart Datum (0.0m), the sandbank protrudes 1.4 metres into the air.

Calculating Water Depth over Drying Features

Total Water Depth = Height of Tide − Drying Height \text{Total Water Depth} = \text{Height of Tide} - \text{Drying Height} Total Water Depth = Height of Tide − Drying Height

If Height of Tide exceeds drying height, the bank is covered:

Height of Tide = 3.6m, Drying Height = 1.4m: Depth = 3.6 m − 1.4 m = 2.2 m \text{Depth} = 3.6\text{m} - 1.4\text{m} = \mathbf{2.2\text{m}} Depth = 3.6 m − 1.4 m = 2.2 m .

If Height of Tide is less than drying height, the bank is dry:

Height of Tide = 0.9m, Drying Height = 1.4m: Depth = 0.9 m − 1.4 m = − 0.5 m \text{Depth} = 0.9\text{m} - 1.4\text{m} = -0.5\text{m} Depth = 0.9 m − 1.4 m = − 0.5 m (bank dries 0.5m above water).

High Water Datums & Overhead Clearances

High water datums govern vertical clearances above the sea surface:

Highest Astronomical Tide (HAT): Highest predictable tidal level under average weather across the 18.6-year cycle.

Mean High Water Springs (MHWS): Average spring high water; defines charted coastlines.

Mean High Water Neaps (MHWN): Average neap high water level.

Overhead Clearances (Bridges & Cables)

To ensure safety errors fail on the side of caution, charted vertical clearances for bridges and power cables are heights above the stated high-water datum, commonly HAT (or MHWS on older charts). As the tide falls below HAT, available clearance beneath the bridge increases.

Overhead Clearance Formula

Clearance Margin = Charted Clearance + ( HAT − Height of Tide ) − Air Draught \text{Clearance Margin} = \text{Charted Clearance} + (\text{HAT} - \text{Height of Tide}) - \text{Air Draught} Clearance Margin = Charted Clearance + ( HAT − Height of Tide ) − Air Draught

Where:

Charted Clearance \text{Charted Clearance} Charted Clearance is published height from HAT to the lowest span.

( HAT − Height of Tide ) (\text{HAT} - \text{Height of Tide}) ( HAT − Height of Tide ) is extra vertical space gained because the tide is below HAT.

Air Draught \text{Air Draught} Air Draught is vessel height from waterline to masthead tip (including antennas).

Bridge Clearance Example:

Charted Bridge Clearance (to HAT): 16.0m; Port HAT: 5.0m; Predicted HoT: 3.2m; Air Draught: 16.8m.

Bridge Height Above Water = 16.0 m + ( 5.0 m − 3.2 m ) = 17.8 m \text{Bridge Height Above Water} = 16.0\text{m} + (5.0\text{m} - 3.2\text{m}) = 17.8\text{m} Bridge Height Above Water = 16.0 m + ( 5.0 m − 3.2 m ) = 17.8 m .

Clearance Margin = 17.8 m − 16.8 m = 1.0 m \text{Clearance Margin} = 17.8\text{m} - 16.8\text{m} = \mathbf{1.0\text{m}} Clearance Margin = 17.8 m − 16.8 m = 1.0 m .

Important

Overhead Power Cables: Electrical arcing can occur without contact. Distinguish physical clearance from an authorised safe vertical clearance , which already deducts an electrical safety margin. Follow the chart notes and local authority guidance; do not substitute a universal 2m–3m allowance.

Tidal Levels & Reference Planes

  • Reference Plane Acronym Baseline Direction Navigational Function
  • Overhead Clearance — Above the stated high-water datum Vertical space beneath bridges and cables
  • Highest Astronomical Tide HAT Upwards from CD Highest predictable water level; clearance datum
  • Mean High Water Springs MHWS Upwards from CD Average spring high water; defines charted coastlines
  • Mean High Water Neaps MHWN Upwards from CD Average neap high water level
  • Chart Datum CD Zero Baseline (0.0m) Baseline for charted soundings and drying heights
  • Drying Height — Upwards from CD Elevation of intertidal seabed (underlined green)
  • Charted Depth — Downwards from CD Surveyed seabed depth below CD

Loading diagram... Vertical Reference Datums & Soundings Architecture