Study guide

4.3 Standard Port Tidal Calculations & The Rule of Twelfths

RYA Coastal Skipper / Yachtmaster Offshore Shorebased Theory Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: The Magnetic Compass, Variation & Deviation

1.1 The Magnetic Compass, Earth's Magnetic Field & Variation 1.2 Compass Deviation, Deviation Cards & Swinging the Compass 1.3 The Mercator Projection, Chart Symbols & Latitude Distance Scales

2 Chapter 2: Dead Reckoning, Estimated Position & Leeway

2.1 Dead Reckoning (DR) & Water Track Principles 2.2 Wind Leeway & Calculating Water Track 2.3 Plotting an Estimated Position (EP) with Tidal Stream

3 Chapter 3: Course to Steer, Vector Triangles & Position Lines

3.1 Course to Steer (CTS) Single-Hour Vector Triangles 3.2 Multi-Hour Courses to Steer & Changing Tidal Streams 3.3 Visual Position Lines, Three-Bearing Fixes & Cocked Hats 3.4 Running Fixes, Transferred Position Lines & Electronic Aids

4 Chapter 4: Tidal Heights, Datums & Standard Port Calculations

4.1 Tidal Theory, Astronomical Causes, Springs & Neaps 4.2 Chart Datums, Lowest Astronomical Tide (LAT) & Soundings 4.3 Standard Port Tidal Calculations & The Rule of Twelfths

5 Chapter 5: Secondary Ports, Tidal Streams & Dynamic Waters

5.1 Secondary Port Calculations: Time & Height Differences 5.2 Using Admiralty Tidal Curves for Height at Any Time 5.3 Tidal Diamonds, Stream Atlases & Tidal Gates 5.4 Tidal Overfalls, Races, Wind-Over-Tide & Shallow Water Effects

6 Chapter 6: IRPCS Steering & Sailing Rules

6.1 General Rules, Look-out, Safe Speed & Risk of Collision (Rules 1-8) 6.2 Narrow Channels & Traffic Separation Schemes (Rules 9 & 10) 6.3 Steering Rules: Sailing Vessels, Overtaking, Head-on & Crossing (Rules 12-17) 6.4 Responsibilities Between Vessels & Restricted Visibility (Rules 18 & 19)

7 Chapter 7: IRPCS Navigation Lights, Day Shapes & Sound Signals

7.1 Fundamentals of Navigation Lights & Day Shapes (Rules 20-22) 7.2 Specific Vessel Lights & Shapes: Power, Sail, Towing & Fishing (Rules 23-26) 7.3 Special Category Vessels: NUC, RAM, CBD, Pilot & Anchored (Rules 27-31) 7.4 Sound and Light Signals: Manoeuvring, Warning & Fog (Rules 32-37)

8 Chapter 8: The IALA Maritime Buoyage System

8.1 Lateral Marks: System A and System B Comparison 8.2 Cardinal Marks: Quadrants, Topmarks, Colours & Light Sequences 8.3 Isolated Danger, Safe Water, Special & Emergency Wreck Marks

9 Chapter 9: Meteorology, Synoptic Systems & Depressions

9.1 Atmospheric Pressure, Isobars & Buys Ballot's Law 9.2 Air Masses & The Anatomy of a Frontal Depression 9.3 Passage of a Frontal Depression: Pressure, Wind & Cloud Changes 9.4 Anticyclones, Ridges, Cols & Troughs

10 Chapter 10: Local Coastal Weather, Fog & Forecasts

10.1 Coastal Effects: Sea & Land Breezes, Katabatic Winds & Funnelling 10.2 Fog Formation: Advection Fog, Radiation Fog & Sea Smoke 10.3 Beaufort Wind Scale & Maritime Forecast Interpretation

11 Chapter 11: Passage Planning & Pilotage Under SOLAS Chapter V

11.1 SOLAS Chapter V Regulations & The 4 Stages of Passage Planning 11.2 Routing Strategy, Tidal Windows, Fuel Planning & Contingencies 11.3 Pilotage Plans, Clearing Bearings, Leading Lines & Soundings 11.4 Night Pilotage, Light Characteristics & Dipping Distances

12 Chapter 12: Marine Safety, Emergencies & GMDSS Communications

12.1 GMDSS Architecture, VHF DSC & Marine Radio Distress Procedures 12.2 Emergency Distress Equipment: EPIRB, SART, Navtex & Pyrotechnics 12.3 Heavy Weather Seamanship, Stability & Man Overboard Recovery

4.3 Standard Port Tidal Calculations & The Rule of Twelfths

Key Takeaways Explain This Topic AI

A Standard Port has daily predicted High and Low Water times and heights published directly in the tide tables; secondary-port differences refer to a designated Standard Port.

Tidal Range is the absolute vertical difference between consecutive High and Low Waters (Range = HW Height - LW Height); tidal duration is the elapsed time between them.

The Rule of Twelfths approximates a harmonic 6-hour semi-diurnal tide by dividing the range into successive hourly portions: 1/12, 2/12, 3/12, 3/12, 2/12, 1/12.

The cumulative rise or fall follows 1/12, 3/12 (1/4), 6/12 (1/2), 9/12 (3/4), 11/12, 12/12; the rate of water movement is fastest at the 3rd and 4th hours (half tide), where half the total range occurs.

The Rule of Twelfths assumes a symmetrical sinusoidal curve and ~6-hour duration; it is completely invalid in areas with shallow-water distortions, extended stands, or double high waters (e.g. Southampton and the Solent).

Last updated: November 2026

4.3 Standard Port Tidal Calculations & The Rule of Twelfths

Note

Core Principle: A Standard Port is an extensively surveyed primary reference port for which daily High and Low Water times and heights are calculated and published directly in Admiralty Tide Tables (ATT). For harmonic semi-diurnal tides with roughly 6-hour durations, the Rule of Twelfths provides a reliable manual approximation of intermediate tidal heights and rates of rise or fall.

Passage planning in tidal waters requires determining depth at a specific time (e.g. crossing a shallow bar or entering a drying harbour) or calculating when sufficient water exists for safe transit. While digital plotters provide instant readouts, an offshore skipper must master manual calculations and recognize where mathematical approximations fail.

Standard Ports & Admiralty Tide Tables (ATT)

The UK Hydrographic Office (UKHO) categorizes ports into Standard Ports and Secondary Ports :

Standard Ports: Ports for which daily predictions are published directly. The UKHO uses harmonic analysis of observed tidal data to compute predicted times and heights published annually in Admiralty Tide Tables (ATT) (select the current regional volume for the passage).

Tabulated Data: Daily ATT tables list calendar dates, times of High Water (HW) and Low Water (LW) (use the printed time zone; for UT-based UK predictions, add 1 hour for BST when applicable), and heights above Chart Datum in metres to one decimal place.

Calculating Range and Duration

From tabulated standard port data, two foundational values are calculated:

Tidal Range: Vertical height difference between consecutive High Water and Low Water: Range = ∣ Height of HW − Height of LW ∣ \text{Range} = |\text{Height of HW} - \text{Height of LW}| Range = ∣ Height of HW − Height of LW ∣

Tidal Duration: Elapsed time between consecutive High Water and Low Water: Duration = ∣ Time of HW − Time of LW ∣ \text{Duration} = |\text{Time of HW} - \text{Time of LW}| Duration = ∣ Time of HW − Time of LW ∣

For example, if HW is 4.8m at 1412 UT and preceding LW was 1.2m at 0754 UT:

Range = 4.8 m − 1.2 m = 3.6 m \text{Range} = 4.8\text{m} - 1.2\text{m} = \mathbf{3.6\text{m}} Range = 4.8 m − 1.2 m = 3.6 m

Duration = 14 h 12 m − 07 h 54 m = 6 hours 18 minutes \text{Duration} = 14\text{h } 12\text{m} - 07\text{h } 54\text{m} = \mathbf{6\text{ hours } 18\text{ minutes}} Duration = 14 h 12 m − 07 h 54 m = 6 hours 18 minutes

The Mathematical Mechanics of the Rule of Twelfths

In open waters, semi-diurnal tides oscillate as simple harmonic waves. Vertical water height h ( t ) h(t) h ( t ) at time t t t relative to Low Water follows a cosine function:

h ( t ) = h LW + Range 2 [ 1 − cos ⁡ ( 180 ∘ × t Duration ) ] h(t) = h_{\text{LW}} + \frac{\text{Range}}{2} \left[1 - \cos\left(\frac{180^\circ \times t}{\text{Duration}}\right)\right] h ( t ) = h LW ​ + 2 Range ​ [ 1 − cos ( Duration 18 0 ∘ × t ​ ) ]

Assuming a standard 6-hour duration, the cycle advances 30° each hour ( 180 ∘ / 6 = 30 ∘ / hr 180^\circ / 6 = 30^\circ/\text{hr} 18 0 ∘ /6 = 3 0 ∘ / hr ). The cosine gives cumulative fractions of approximately6.7%,25%,50%,75%,93.3% and100%. The Rule of Twelfths uses convenient rounded end-hour portions instead:

1st hour (30°): Rises by 1/12 of range (cumulative 1/12 ≈ 8.3%).

2nd hour (60°): Rises by 2/12 of range (cumulative 3/12 = 1/4 = 25.0%).

3rd hour (90°): Rises by 3/12 of range (cumulative 6/12 = 1/2 = 50.0% — Half Tide).

4th hour (120°): Rises by 3/12 of range (cumulative 9/12 = 3/4 = 75.0%).

5th hour (150°): Rises by 2/12 of range (cumulative 11/12 ≈ 91.7%).

6th hour (180°): Rises by 1/12 of range (cumulative 12/12 = 1 = 100.0%).

  • Hour of Tide Hourly Fraction Cumulative Fraction Cumulative Rise Vertical Rate
  • Hour 0 (LW / HW) 0 0 0% Turning point of height
  • Hour 1 +1/12 1/12 8.3% Slow rise or fall
  • Hour 2 +2/12 3/12 25.0% Faster rise or fall
  • Hour 3 +3/12 6/12 50.0% Greatest hourly change
  • Hour 4 +3/12 9/12 75.0% Greatest hourly change
  • Hour 5 +2/12 11/12 91.7% Slowing rise or fall
  • Hour 6 (HW / LW) +1/12 12/12 100.0% Turning point of height

Tip

Half the range rises or falls during the two middle tidal hours in this approximation. This describes vertical water level , not horizontal stream speed. Obtain slack-water and maximum-stream times from local stream information.

  • Worked Calculations: Practical Navigation
  • Scenario 1: Intermediate Tidal Height Calculation

Tide Data: Low Water at 0600 UT (1.6m); High Water at 1200 UT (5.2m).

Duration: 6 hours; Range: 5.2 m − 1.6 m = 3.6 m 5.2\text{m} - 1.6\text{m} = 3.6\text{m} 5.2 m − 1.6 m = 3.6 m .

Value of 1/12th: 3.6 m / 12 = 0.30 m 3.6\text{m} / 12 = \mathbf{0.30\text{m}} 3.6 m /12 = 0.30 m .

Hourly progression from Low Water:

  • 0600 UT (LW): 1.60m
  • 0700 UT (Hr 1): 1.60 + 0.30 = 1.90 m 1.60 + 0.30 = 1.90\text{m} 1.60 + 0.30 = 1.90 m (+1/12)
  • 0800 UT (Hr 2): 1.90 + 0.60 = 2.50 m 1.90 + 0.60 = 2.50\text{m} 1.90 + 0.60 = 2.50 m (+2/12)
  • 0900 UT (Hr 3): 2.50 + 0.90 = 3.40 m 2.50 + 0.90 = 3.40\text{m} 2.50 + 0.90 = 3.40 m (+3/12; half tide)
  • 1000 UT (Hr 4): 3.40 + 0.90 = 4.30 m 3.40 + 0.90 = 4.30\text{m} 3.40 + 0.90 = 4.30 m (+3/12)
  • 1100 UT (Hr 5): 4.30 + 0.60 = 4.90 m 4.30 + 0.60 = 4.90\text{m} 4.30 + 0.60 = 4.90 m (+2/12)
  • 1200 UT (HW): 4.90 + 0.30 = 5.20 m 4.90 + 0.30 = 5.20\text{m} 4.90 + 0.30 = 5.20 m (+1/12)
  • Scenario 2: Clearance Over a Drying Shoal

Vessel Data: Draught = 1.6m, Required UKC = 0.5m. Total required depth = 2.1m .

Harbour Sill: Charted drying height of 0.2m (underlined 0.2 on the chart).

Required Height of Tide (HoT): Required HoT = Required Depth + Drying Height = 2.1 m + 0.2 m = 2.3 m \text{Required HoT} = \text{Required Depth} + \text{Drying Height} = 2.1\text{m} + 0.2\text{m} = \mathbf{2.3\text{m}} Required HoT = Required Depth + Drying Height = 2.1 m + 0.2 m = 2.3 m

Hourly Depth Analysis:

0600 UT: HoT = 1.6 m \text{HoT} = 1.6\text{m} HoT = 1.6 m (Depth over shoal = 1.6 − 0.2 = 1.4 m = 1.6 - 0.2 = 1.4\text{m} = 1.6 − 0.2 = 1.4 m ; vessel grounds).

0700 UT (Hr 1): HoT = 1.9 m \text{HoT} = 1.9\text{m} HoT = 1.9 m (Depth = 1.9 − 0.2 = 1.7 m = 1.9 - 0.2 = 1.7\text{m} = 1.9 − 0.2 = 1.7 m ; insufficient UKC).

0800 UT (Hr 2): HoT = 2.5 m \text{HoT} = 2.5\text{m} HoT = 2.5 m (Depth = 2.5 − 0.2 = 2.3 m = 2.5 - 0.2 = 2.3\text{m} = 2.5 − 0.2 = 2.3 m ; safely exceeds 2.1m).

Whole-hour check: 0800 UT is the first listed whole hour meeting the requirement. The threshold is crossed between0700 and0800; use the local curve for a closer opening-time estimate.

Adapting to Non-6-Hour Durations

When tidal duration is not 6 hours, adjust each tidal hour: Length of Tidal Hour = Duration in Minutes 6 \text{Length of Tidal Hour} = \frac{\text{Duration in Minutes}}{6} Length of Tidal Hour = 6 Duration in Minutes ​

5h 00m duration (300 min): each tidal hour is 300 / 6 = 50 minutes 300 / 6 = \mathbf{50\text{ minutes}} 300/6 = 50 minutes .

6h 30m duration (390 min): each tidal hour is 390 / 6 = 65 minutes 390 / 6 = \mathbf{65\text{ minutes}} 390/6 = 65 minutes .

7h 00m duration (420 min): each tidal hour is 420 / 6 = 70 minutes 420 / 6 = \mathbf{70\text{ minutes}} 420/6 = 70 minutes .

Hydrographic Limitations: Where the Rule Breaks Down

The Rule of Twelfths assumes a pure sine wave and must never be applied blindly:

Shallow-Water Harmonics: In shallow estuaries, seabed friction retards the trough, compressing the flood into a steep rise (e.g. 4 hours) and extending the ebb into a slow fall (e.g. 8 hours).

Double High Waters and Prolonged Stands: Local harmonics and basin response can distort the curve: Southampton has double high water and Weymouth double low water. Stands and asymmetry vary by port and tide; the simple twelfths profile is unsuitable where it does not represent the published curve.

Admiralty Tidal Curves: For formal navigation, secondary ports, and Yachtmaster exams, navigators must use published Admiralty Tidal Curves whenever precision is required.

Loading diagram... Rule of Twelfths Hourly Progression and Rate of Rise